com.google.monitoring.v3

Class Point.Builder

java.lang.Object

com.google.protobuf.AbstractMessageLite.Builder

com.google.protobuf.AbstractMessage.Builder<BuilderType>

com.google.protobuf.GeneratedMessageV3.Builder<Point.Builder>

com.google.monitoring.v3.Point.Builder

All Implemented Interfaces:

PointOrBuilder, Message.Builder, MessageLite.Builder, MessageLiteOrBuilder, MessageOrBuilder, java.lang.Cloneable

Enclosing class:

Point

public static final class Point.Builder
extends GeneratedMessageV3.Builder<Point.Builder>
implements PointOrBuilder

 A single data point in a time series.
 

Protobuf type google.monitoring.v3.Point

Method Summary

Modifier and Type	Method and Description
Point.Builder	addRepeatedField(Descriptors.FieldDescriptor field, java.lang.Object value)
Point	build()
Point	buildPartial()
Point.Builder	clear()
Point.Builder	clearField(Descriptors.FieldDescriptor field)
Point.Builder	clearInterval() The time interval to which the data point applies.
Point.Builder	clearOneof(Descriptors.OneofDescriptor oneof)
Point.Builder	clearValue() The value of the data point.
Point.Builder	clone()
Point	getDefaultInstanceForType()
static Descriptors.Descriptor	getDescriptor()
Descriptors.Descriptor	getDescriptorForType()
TimeInterval	getInterval() The time interval to which the data point applies.
TimeInterval.Builder	getIntervalBuilder() The time interval to which the data point applies.
TimeIntervalOrBuilder	getIntervalOrBuilder() The time interval to which the data point applies.
TypedValue	getValue() The value of the data point.
TypedValue.Builder	getValueBuilder() The value of the data point.
TypedValueOrBuilder	getValueOrBuilder() The value of the data point.
boolean	hasInterval() The time interval to which the data point applies.
boolean	hasValue() The value of the data point.
protected GeneratedMessageV3.FieldAccessorTable	internalGetFieldAccessorTable()
boolean	isInitialized()
Point.Builder	mergeFrom(CodedInputStream input, ExtensionRegistryLite extensionRegistry)
Point.Builder	mergeFrom(Message other)
Point.Builder	mergeFrom(Point other)
Point.Builder	mergeInterval(TimeInterval value) The time interval to which the data point applies.
Point.Builder	mergeUnknownFields(UnknownFieldSet unknownFields)
Point.Builder	mergeValue(TypedValue value) The value of the data point.
Point.Builder	setField(Descriptors.FieldDescriptor field, java.lang.Object value)
Point.Builder	setInterval(TimeInterval.Builder builderForValue) The time interval to which the data point applies.
Point.Builder	setInterval(TimeInterval value) The time interval to which the data point applies.
Point.Builder	setRepeatedField(Descriptors.FieldDescriptor field, int index, java.lang.Object value)
Point.Builder	setUnknownFields(UnknownFieldSet unknownFields)
Point.Builder	setValue(TypedValue.Builder builderForValue) The value of the data point.
Point.Builder	setValue(TypedValue value) The value of the data point.

Methods inherited from class com.google.protobuf.GeneratedMessageV3.Builder

getAllFields, getField, getFieldBuilder, getOneofFieldDescriptor, getParentForChildren, getRepeatedField, getRepeatedFieldBuilder, getRepeatedFieldCount, getUnknownFields, hasField, hasOneof, internalGetMapField, internalGetMutableMapField, isClean, markClean, newBuilderForField, onBuilt, onChanged, setUnknownFieldsProto3

Methods inherited from class com.google.protobuf.AbstractMessage.Builder

findInitializationErrors, getInitializationErrorString, internalMergeFrom, mergeDelimitedFrom, mergeDelimitedFrom, mergeFrom, mergeFrom, mergeFrom, mergeFrom, mergeFrom, mergeFrom, mergeFrom, mergeFrom, mergeFrom, newUninitializedMessageException, toString

Methods inherited from class com.google.protobuf.AbstractMessageLite.Builder

addAll, addAll, mergeFrom, newUninitializedMessageException

Methods inherited from class java.lang.Object

equals, finalize, getClass, hashCode, notify, notifyAll, wait, wait, wait

Methods inherited from interface com.google.protobuf.MessageOrBuilder

findInitializationErrors, getAllFields, getField, getInitializationErrorString, getOneofFieldDescriptor, getRepeatedField, getRepeatedFieldCount, getUnknownFields, hasField, hasOneof

Methods inherited from interface com.google.protobuf.MessageLite.Builder

mergeFrom

Method Detail

getDescriptor

public static final Descriptors.Descriptor getDescriptor()

internalGetFieldAccessorTable

protected GeneratedMessageV3.FieldAccessorTable internalGetFieldAccessorTable()

Specified by:

internalGetFieldAccessorTable in class GeneratedMessageV3.Builder<Point.Builder>

clear

public Point.Builder clear()

Specified by:

clear in interface Message.Builder

Specified by:

clear in interface MessageLite.Builder

Overrides:

clear in class GeneratedMessageV3.Builder<Point.Builder>

getDescriptorForType

public Descriptors.Descriptor getDescriptorForType()

Specified by:

getDescriptorForType in interface Message.Builder

Specified by:

getDescriptorForType in interface MessageOrBuilder

Overrides:

getDescriptorForType in class GeneratedMessageV3.Builder<Point.Builder>

getDefaultInstanceForType

public Point getDefaultInstanceForType()

Specified by:

getDefaultInstanceForType in interface MessageLiteOrBuilder

Specified by:

getDefaultInstanceForType in interface MessageOrBuilder

build

public Point build()

Specified by:

build in interface Message.Builder

Specified by:

build in interface MessageLite.Builder

buildPartial

public Point buildPartial()

Specified by:

buildPartial in interface Message.Builder

Specified by:

buildPartial in interface MessageLite.Builder

clone

public Point.Builder clone()

Specified by:

clone in interface Message.Builder

Specified by:

clone in interface MessageLite.Builder

Overrides:

clone in class GeneratedMessageV3.Builder<Point.Builder>

setField

public Point.Builder setField(Descriptors.FieldDescriptor field,
                              java.lang.Object value)

Specified by:

setField in interface Message.Builder

Overrides:

setField in class GeneratedMessageV3.Builder<Point.Builder>

clearField

public Point.Builder clearField(Descriptors.FieldDescriptor field)

Specified by:

clearField in interface Message.Builder

Overrides:

clearField in class GeneratedMessageV3.Builder<Point.Builder>

clearOneof

public Point.Builder clearOneof(Descriptors.OneofDescriptor oneof)

Specified by:

clearOneof in interface Message.Builder

Overrides:

clearOneof in class GeneratedMessageV3.Builder<Point.Builder>

setRepeatedField

public Point.Builder setRepeatedField(Descriptors.FieldDescriptor field,
                                      int index,
                                      java.lang.Object value)

Specified by:

setRepeatedField in interface Message.Builder

Overrides:

setRepeatedField in class GeneratedMessageV3.Builder<Point.Builder>

addRepeatedField

public Point.Builder addRepeatedField(Descriptors.FieldDescriptor field,
                                      java.lang.Object value)

Specified by:

addRepeatedField in interface Message.Builder

Overrides:

addRepeatedField in class GeneratedMessageV3.Builder<Point.Builder>

mergeFrom

public Point.Builder mergeFrom(Message other)

Specified by:

mergeFrom in interface Message.Builder

Overrides:

mergeFrom in class AbstractMessage.Builder<Point.Builder>

mergeFrom

public Point.Builder mergeFrom(Point other)

isInitialized

public final boolean isInitialized()

Specified by:

isInitialized in interface MessageLiteOrBuilder

Overrides:

isInitialized in class GeneratedMessageV3.Builder<Point.Builder>

mergeFrom

public Point.Builder mergeFrom(CodedInputStream input,
                               ExtensionRegistryLite extensionRegistry)
                        throws java.io.IOException

Specified by:

mergeFrom in interface Message.Builder

Specified by:

mergeFrom in interface MessageLite.Builder

Overrides:

mergeFrom in class AbstractMessage.Builder<Point.Builder>

Throws:

java.io.IOException

hasInterval

public boolean hasInterval()

 The time interval to which the data point applies.  For GAUGE metrics, only
 the end time of the interval is used.  For DELTA metrics, the start and end
 time should specify a non-zero interval, with subsequent points specifying
 contiguous and non-overlapping intervals.  For CUMULATIVE metrics, the
 start and end time should specify a non-zero interval, with subsequent
 points specifying the same start time and increasing end times, until an
 event resets the cumulative value to zero and sets a new start time for the
 following points.
 

.google.monitoring.v3.TimeInterval interval = 1;

Specified by:

hasInterval in interface PointOrBuilder

getInterval

public TimeInterval getInterval()

 The time interval to which the data point applies.  For GAUGE metrics, only
 the end time of the interval is used.  For DELTA metrics, the start and end
 time should specify a non-zero interval, with subsequent points specifying
 contiguous and non-overlapping intervals.  For CUMULATIVE metrics, the
 start and end time should specify a non-zero interval, with subsequent
 points specifying the same start time and increasing end times, until an
 event resets the cumulative value to zero and sets a new start time for the
 following points.
 

.google.monitoring.v3.TimeInterval interval = 1;

Specified by:

getInterval in interface PointOrBuilder

setInterval

public Point.Builder setInterval(TimeInterval value)

 The time interval to which the data point applies.  For GAUGE metrics, only
 the end time of the interval is used.  For DELTA metrics, the start and end
 time should specify a non-zero interval, with subsequent points specifying
 contiguous and non-overlapping intervals.  For CUMULATIVE metrics, the
 start and end time should specify a non-zero interval, with subsequent
 points specifying the same start time and increasing end times, until an
 event resets the cumulative value to zero and sets a new start time for the
 following points.
 

.google.monitoring.v3.TimeInterval interval = 1;

setInterval

public Point.Builder setInterval(TimeInterval.Builder builderForValue)

 The time interval to which the data point applies.  For GAUGE metrics, only
 the end time of the interval is used.  For DELTA metrics, the start and end
 time should specify a non-zero interval, with subsequent points specifying
 contiguous and non-overlapping intervals.  For CUMULATIVE metrics, the
 start and end time should specify a non-zero interval, with subsequent
 points specifying the same start time and increasing end times, until an
 event resets the cumulative value to zero and sets a new start time for the
 following points.
 

.google.monitoring.v3.TimeInterval interval = 1;

mergeInterval

public Point.Builder mergeInterval(TimeInterval value)

 The time interval to which the data point applies.  For GAUGE metrics, only
 the end time of the interval is used.  For DELTA metrics, the start and end
 time should specify a non-zero interval, with subsequent points specifying
 contiguous and non-overlapping intervals.  For CUMULATIVE metrics, the
 start and end time should specify a non-zero interval, with subsequent
 points specifying the same start time and increasing end times, until an
 event resets the cumulative value to zero and sets a new start time for the
 following points.
 

.google.monitoring.v3.TimeInterval interval = 1;

clearInterval

public Point.Builder clearInterval()

 The time interval to which the data point applies.  For GAUGE metrics, only
 the end time of the interval is used.  For DELTA metrics, the start and end
 time should specify a non-zero interval, with subsequent points specifying
 contiguous and non-overlapping intervals.  For CUMULATIVE metrics, the
 start and end time should specify a non-zero interval, with subsequent
 points specifying the same start time and increasing end times, until an
 event resets the cumulative value to zero and sets a new start time for the
 following points.
 

.google.monitoring.v3.TimeInterval interval = 1;

getIntervalBuilder

public TimeInterval.Builder getIntervalBuilder()

 The time interval to which the data point applies.  For GAUGE metrics, only
 the end time of the interval is used.  For DELTA metrics, the start and end
 time should specify a non-zero interval, with subsequent points specifying
 contiguous and non-overlapping intervals.  For CUMULATIVE metrics, the
 start and end time should specify a non-zero interval, with subsequent
 points specifying the same start time and increasing end times, until an
 event resets the cumulative value to zero and sets a new start time for the
 following points.
 

.google.monitoring.v3.TimeInterval interval = 1;

getIntervalOrBuilder

public TimeIntervalOrBuilder getIntervalOrBuilder()

 The time interval to which the data point applies.  For GAUGE metrics, only
 the end time of the interval is used.  For DELTA metrics, the start and end
 time should specify a non-zero interval, with subsequent points specifying
 contiguous and non-overlapping intervals.  For CUMULATIVE metrics, the
 start and end time should specify a non-zero interval, with subsequent
 points specifying the same start time and increasing end times, until an
 event resets the cumulative value to zero and sets a new start time for the
 following points.
 

.google.monitoring.v3.TimeInterval interval = 1;

Specified by:

getIntervalOrBuilder in interface PointOrBuilder

hasValue

public boolean hasValue()

 The value of the data point.
 

.google.monitoring.v3.TypedValue value = 2;

Specified by:

hasValue in interface PointOrBuilder

getValue

public TypedValue getValue()

 The value of the data point.
 

.google.monitoring.v3.TypedValue value = 2;

Specified by:

getValue in interface PointOrBuilder

setValue

public Point.Builder setValue(TypedValue value)

 The value of the data point.
 

.google.monitoring.v3.TypedValue value = 2;

setValue

public Point.Builder setValue(TypedValue.Builder builderForValue)

 The value of the data point.
 

.google.monitoring.v3.TypedValue value = 2;

mergeValue

public Point.Builder mergeValue(TypedValue value)

 The value of the data point.
 

.google.monitoring.v3.TypedValue value = 2;

clearValue

public Point.Builder clearValue()

 The value of the data point.
 

.google.monitoring.v3.TypedValue value = 2;

getValueBuilder

public TypedValue.Builder getValueBuilder()

 The value of the data point.
 

.google.monitoring.v3.TypedValue value = 2;

getValueOrBuilder

public TypedValueOrBuilder getValueOrBuilder()

 The value of the data point.
 

.google.monitoring.v3.TypedValue value = 2;

Specified by:

getValueOrBuilder in interface PointOrBuilder

setUnknownFields

public final Point.Builder setUnknownFields(UnknownFieldSet unknownFields)

Specified by:

setUnknownFields in interface Message.Builder

Overrides:

setUnknownFields in class GeneratedMessageV3.Builder<Point.Builder>

mergeUnknownFields

public final Point.Builder mergeUnknownFields(UnknownFieldSet unknownFields)

Specified by:

mergeUnknownFields in interface Message.Builder

Overrides:

mergeUnknownFields in class GeneratedMessageV3.Builder<Point.Builder>