class ProjectsSnapshots extends Resource (View source)

The "snapshots" collection of methods.

Typical usage is:

 $pubsubService = new Google\Service\Pubsub(...);
 $snapshots = $pubsubService->projects_snapshots;

Methods

create(string $name, CreateSnapshotRequest $postBody, array $optParams = [])

Creates a snapshot from the requested subscription. Snapshots are used in Seek operations, which allow you to manage message acknowledgments in bulk. That is, you can set the acknowledgment state of messages in an existing subscription to the state captured by a snapshot. If the snapshot already exists, returns ALREADY_EXISTS. If the requested subscription doesn't exist, returns NOT_FOUND. If the backlog in the subscription is too old -- and the resulting snapshot would expire in less than 1 hour -- then FAILED_PRECONDITION is returned. See also the Snapshot.expire_time field.

delete(string $snapshot, array $optParams = [])

Removes an existing snapshot. Snapshots are used in [Seek] (https://cloud.google.com/pubsub/docs/replay-overview) operations, which allow you to manage message acknowledgments in bulk. That is, you can set the acknowledgment state of messages in an existing subscription to the state captured by a snapshot. When the snapshot is deleted, all messages retained in the snapshot are immediately dropped. After a snapshot is deleted, a new one may be created with the same name, but the new one has no association with the old snapshot or its subscription, unless the same subscription is specified. (snapshots.delete)

get(string $snapshot, array $optParams = [])

Gets the configuration details of a snapshot. Snapshots are used in Seek operations, which allow you to manage message acknowledgments in bulk. That is, you can set the acknowledgment state of messages in an existing subscription to the state captured by a snapshot. (snapshots.get)

getIamPolicy(string $resource, array $optParams = [])

Gets the access control policy for a resource. Returns an empty policy if the resource exists and does not have a policy set. (snapshots.getIamPolicy)

listProjectsSnapshots(string $project, array $optParams = [])

Lists the existing snapshots. Snapshots are used in Seek operations, which allow you to manage message acknowledgments in bulk. That is, you can set the acknowledgment state of messages in an existing subscription to the state captured by a snapshot. (snapshots.listProjectsSnapshots)

patch(string $name, UpdateSnapshotRequest $postBody, array $optParams = [])

Updates an existing snapshot by updating the fields specified in the update mask. Snapshots are used in Seek operations, which allow you to manage message acknowledgments in bulk. That is, you can set the acknowledgment state of messages in an existing subscription to the state captured by a snapshot. (snapshots.patch)

setIamPolicy(string $resource, SetIamPolicyRequest $postBody, array $optParams = [])

Sets the access control policy on the specified resource. Replaces any existing policy. Can return NOT_FOUND, INVALID_ARGUMENT, and PERMISSION_DENIED errors. (snapshots.setIamPolicy)

testIamPermissions(string $resource, TestIamPermissionsRequest $postBody, array $optParams = [])

Returns permissions that a caller has on the specified resource. If the resource does not exist, this will return an empty set of permissions, not a NOT_FOUND error. Note: This operation is designed to be used for building permission-aware UIs and command-line tools, not for authorization checking.

Details

Snapshot create(string $name, CreateSnapshotRequest $postBody, array $optParams = [])

Creates a snapshot from the requested subscription. Snapshots are used in Seek operations, which allow you to manage message acknowledgments in bulk. That is, you can set the acknowledgment state of messages in an existing subscription to the state captured by a snapshot. If the snapshot already exists, returns ALREADY_EXISTS. If the requested subscription doesn't exist, returns NOT_FOUND. If the backlog in the subscription is too old -- and the resulting snapshot would expire in less than 1 hour -- then FAILED_PRECONDITION is returned. See also the Snapshot.expire_time field.

If the name is not provided in the request, the server will assign a random name for this snapshot on the same project as the subscription, conforming to the [resource name format] (https://cloud.google.com/pubsub/docs/pubsub- basics#resource_names). The generated name is populated in the returned Snapshot object. Note that for REST API requests, you must specify a name in the request. (snapshots.create)

Parameters

string $name

Required. User-provided name for this snapshot. If the name is not provided in the request, the server will assign a random name for this snapshot on the same project as the subscription. Note that for REST API requests, you must specify a name. See the resource name rules. Format is projects/{project}/snapshots/{snap}.

CreateSnapshotRequest $postBody
array $optParams

Optional parameters.

Return Value

Snapshot

Exceptions

Exception

PubsubEmpty delete(string $snapshot, array $optParams = [])

Removes an existing snapshot. Snapshots are used in [Seek] (https://cloud.google.com/pubsub/docs/replay-overview) operations, which allow you to manage message acknowledgments in bulk. That is, you can set the acknowledgment state of messages in an existing subscription to the state captured by a snapshot. When the snapshot is deleted, all messages retained in the snapshot are immediately dropped. After a snapshot is deleted, a new one may be created with the same name, but the new one has no association with the old snapshot or its subscription, unless the same subscription is specified. (snapshots.delete)

Parameters

string $snapshot

Required. The name of the snapshot to delete. Format is projects/{project}/snapshots/{snap}.

array $optParams

Optional parameters.

Return Value

PubsubEmpty

Exceptions

Exception

Snapshot get(string $snapshot, array $optParams = [])

Gets the configuration details of a snapshot. Snapshots are used in Seek operations, which allow you to manage message acknowledgments in bulk. That is, you can set the acknowledgment state of messages in an existing subscription to the state captured by a snapshot. (snapshots.get)

Parameters

string $snapshot

Required. The name of the snapshot to get. Format is projects/{project}/snapshots/{snap}.

array $optParams

Optional parameters.

Return Value

Snapshot

Exceptions

Exception

Policy getIamPolicy(string $resource, array $optParams = [])

Gets the access control policy for a resource. Returns an empty policy if the resource exists and does not have a policy set. (snapshots.getIamPolicy)

Parameters

string $resource

REQUIRED: The resource for which the policy is being requested. See Resource names for the appropriate value for this field.

array $optParams

Optional parameters.

Return Value

Policy

Exceptions

Exception

ListSnapshotsResponse listProjectsSnapshots(string $project, array $optParams = [])

Lists the existing snapshots. Snapshots are used in Seek operations, which allow you to manage message acknowledgments in bulk. That is, you can set the acknowledgment state of messages in an existing subscription to the state captured by a snapshot. (snapshots.listProjectsSnapshots)

Parameters

string $project

Required. The name of the project in which to list snapshots. Format is projects/{project-id}.

array $optParams

Optional parameters.

Return Value

ListSnapshotsResponse

Exceptions

Exception

Snapshot patch(string $name, UpdateSnapshotRequest $postBody, array $optParams = [])

Updates an existing snapshot by updating the fields specified in the update mask. Snapshots are used in Seek operations, which allow you to manage message acknowledgments in bulk. That is, you can set the acknowledgment state of messages in an existing subscription to the state captured by a snapshot. (snapshots.patch)

Parameters

string $name

Optional. The name of the snapshot.

UpdateSnapshotRequest $postBody
array $optParams

Optional parameters.

Return Value

Snapshot

Exceptions

Exception

Policy setIamPolicy(string $resource, SetIamPolicyRequest $postBody, array $optParams = [])

Sets the access control policy on the specified resource. Replaces any existing policy. Can return NOT_FOUND, INVALID_ARGUMENT, and PERMISSION_DENIED errors. (snapshots.setIamPolicy)

Parameters

string $resource

REQUIRED: The resource for which the policy is being specified. See Resource names for the appropriate value for this field.

SetIamPolicyRequest $postBody
array $optParams

Optional parameters.

Return Value

Policy

Exceptions

Exception

TestIamPermissionsResponse testIamPermissions(string $resource, TestIamPermissionsRequest $postBody, array $optParams = [])

Returns permissions that a caller has on the specified resource. If the resource does not exist, this will return an empty set of permissions, not a NOT_FOUND error. Note: This operation is designed to be used for building permission-aware UIs and command-line tools, not for authorization checking.

This operation may "fail open" without warning. (snapshots.testIamPermissions)

Parameters

string $resource

REQUIRED: The resource for which the policy detail is being requested. See Resource names for the appropriate value for this field.

TestIamPermissionsRequest $postBody
array $optParams

Optional parameters.

Return Value

TestIamPermissionsResponse

Exceptions

Exception