Returns the assignments Resource.
Close httplib2 connections.
create(parent, body=None, reservationId=None, x__xgafv=None)
Creates a new reservation resource.
Deletes a reservation. Returns `google.rpc.Code.FAILED_PRECONDITION` when reservation has assignments.
failoverReservation(name, body=None, x__xgafv=None)
Fail over a reservation to the secondary location. The operation should be done in the current secondary location, which will be promoted to the new primary location for the reservation. Attempting to failover a reservation in the current primary location will fail with the error code `google.rpc.Code.FAILED_PRECONDITION`.
Returns information about the reservation.
list(parent, pageSize=None, pageToken=None, x__xgafv=None)
Lists all the reservations for the project in the specified location.
Retrieves the next page of results.
patch(name, body=None, updateMask=None, x__xgafv=None)
Updates an existing reservation resource.
close()
Close httplib2 connections.
create(parent, body=None, reservationId=None, x__xgafv=None)
Creates a new reservation resource.
Args:
parent: string, Required. Project, location. E.g., `projects/myproject/locations/US` (required)
body: object, The request body.
The object takes the form of:
{ # A reservation is a mechanism used to guarantee slots to users.
"autoscale": { # Auto scaling settings. # The configuration parameters for the auto scaling feature.
"currentSlots": "A String", # Output only. The slot capacity added to this reservation when autoscale happens. Will be between [0, max_slots]. Note: after users reduce max_slots, it may take a while before it can be propagated, so current_slots may stay in the original value and could be larger than max_slots for that brief period (less than one minute)
"maxSlots": "A String", # Number of slots to be scaled when needed.
},
"concurrency": "A String", # Job concurrency target which sets a soft upper bound on the number of jobs that can run concurrently in this reservation. This is a soft target due to asynchronous nature of the system and various optimizations for small queries. Default value is 0 which means that concurrency target will be automatically computed by the system. NOTE: this field is exposed as target job concurrency in the Information Schema, DDL and BigQuery CLI.
"creationTime": "A String", # Output only. Creation time of the reservation.
"edition": "A String", # Edition of the reservation.
"ignoreIdleSlots": True or False, # If false, any query or pipeline job using this reservation will use idle slots from other reservations within the same admin project. If true, a query or pipeline job using this reservation will execute with the slot capacity specified in the slot_capacity field at most.
"labels": { # Optional. The labels associated with this reservation. You can use these to organize and group your reservations. You can set this property when inserting or updating a reservation.
"a_key": "A String",
},
"maxSlots": "A String", # Optional. The overall max slots for the reservation, covering slot_capacity (baseline), idle slots (if ignore_idle_slots is false) and scaled slots. If present, the reservation won't use more than the specified number of slots, even if there is demand and supply (from idle slots). NOTE: capping a reservation's idle slot usage is best effort and its usage may exceed the max_slots value. However, in terms of autoscale.current_slots (which accounts for the additional added slots), it will never exceed the max_slots - baseline. This field must be set together with the scaling_mode enum value, otherwise the request will be rejected with error code `google.rpc.Code.INVALID_ARGUMENT`. If the max_slots and scaling_mode are set, the autoscale or autoscale.max_slots field must be unset. Otherwise the request will be rejected with error code `google.rpc.Code.INVALID_ARGUMENT`. However, the autoscale field may still be in the output. The autopscale.max_slots will always show as 0 and the autoscaler.current_slots will represent the current slots from autoscaler excluding idle slots. For example, if the max_slots is 1000 and scaling_mode is AUTOSCALE_ONLY, then in the output, the autoscaler.max_slots will be 0 and the autoscaler.current_slots may be any value between 0 and 1000. If the max_slots is 1000, scaling_mode is ALL_SLOTS, the baseline is 100 and idle slots usage is 200, then in the output, the autoscaler.max_slots will be 0 and the autoscaler.current_slots will not be higher than 700. If the max_slots is 1000, scaling_mode is IDLE_SLOTS_ONLY, then in the output, the autoscaler field will be null. If the max_slots and scaling_mode are set, then the ignore_idle_slots field must be aligned with the scaling_mode enum value.(See details in ScalingMode comments). Otherwise the request will be rejected with error code `google.rpc.Code.INVALID_ARGUMENT`. Please note, the max_slots is for user to manage the part of slots greater than the baseline. Therefore, we don't allow users to set max_slots smaller or equal to the baseline as it will not be meaningful. If the field is present and slot_capacity>=max_slots, requests will be rejected with error code `google.rpc.Code.INVALID_ARGUMENT`. Please note that if max_slots is set to 0, we will treat it as unset. Customers can set max_slots to 0 and set scaling_mode to SCALING_MODE_UNSPECIFIED to disable the max_slots feature.
"multiRegionAuxiliary": True or False, # Applicable only for reservations located within one of the BigQuery multi-regions (US or EU). If set to true, this reservation is placed in the organization's secondary region which is designated for disaster recovery purposes. If false, this reservation is placed in the organization's default region. NOTE: this is a preview feature. Project must be allow-listed in order to set this field.
"name": "A String", # The resource name of the reservation, e.g., `projects/*/locations/*/reservations/team1-prod`. The reservation_id must only contain lower case alphanumeric characters or dashes. It must start with a letter and must not end with a dash. Its maximum length is 64 characters.
"originalPrimaryLocation": "A String", # Output only. The location where the reservation was originally created. This is set only during the failover reservation's creation. All billing charges for the failover reservation will be applied to this location.
"primaryLocation": "A String", # Output only. The current location of the reservation's primary replica. This field is only set for reservations using the managed disaster recovery feature.
"replicationStatus": { # Disaster Recovery(DR) replication status of the reservation. # Output only. The Disaster Recovery(DR) replication status of the reservation. This is only available for the primary replicas of DR/failover reservations and provides information about the both the staleness of the secondary and the last error encountered while trying to replicate changes from the primary to the secondary. If this field is blank, it means that the reservation is either not a DR reservation or the reservation is a DR secondary or that any replication operations on the reservation have succeeded.
"error": { # The `Status` type defines a logical error model that is suitable for different programming environments, including REST APIs and RPC APIs. It is used by [gRPC](https://github.com/grpc). Each `Status` message contains three pieces of data: error code, error message, and error details. You can find out more about this error model and how to work with it in the [API Design Guide](https://cloud.google.com/apis/design/errors). # Output only. The last error encountered while trying to replicate changes from the primary to the secondary. This field is only available if the replication has not succeeded since.
"code": 42, # The status code, which should be an enum value of google.rpc.Code.
"details": [ # A list of messages that carry the error details. There is a common set of message types for APIs to use.
{
"a_key": "", # Properties of the object. Contains field @type with type URL.
},
],
"message": "A String", # A developer-facing error message, which should be in English. Any user-facing error message should be localized and sent in the google.rpc.Status.details field, or localized by the client.
},
"lastErrorTime": "A String", # Output only. The time at which the last error was encountered while trying to replicate changes from the primary to the secondary. This field is only available if the replication has not succeeded since.
"lastReplicationTime": "A String", # Output only. A timestamp corresponding to the last change on the primary that was successfully replicated to the secondary.
},
"scalingMode": "A String", # The scaling mode for the reservation. If the field is present but max_slots is not present, requests will be rejected with error code `google.rpc.Code.INVALID_ARGUMENT`.
"secondaryLocation": "A String", # Optional. The current location of the reservation's secondary replica. This field is only set for reservations using the managed disaster recovery feature. Users can set this in create reservation calls to create a failover reservation or in update reservation calls to convert a non-failover reservation to a failover reservation(or vice versa).
"slotCapacity": "A String", # Baseline slots available to this reservation. A slot is a unit of computational power in BigQuery, and serves as the unit of parallelism. Queries using this reservation might use more slots during runtime if ignore_idle_slots is set to false, or autoscaling is enabled. The total slot_capacity of the reservation and its siblings may exceed the total slot_count of capacity commitments. In that case, the exceeding slots will be charged with the autoscale SKU. You can increase the number of baseline slots in a reservation every few minutes. If you want to decrease your baseline slots, you are limited to once an hour if you have recently changed your baseline slot capacity and your baseline slots exceed your committed slots. Otherwise, you can decrease your baseline slots every few minutes.
"updateTime": "A String", # Output only. Last update time of the reservation.
}
reservationId: string, The reservation ID. It must only contain lower case alphanumeric characters or dashes. It must start with a letter and must not end with a dash. Its maximum length is 64 characters.
x__xgafv: string, V1 error format.
Allowed values
1 - v1 error format
2 - v2 error format
Returns:
An object of the form:
{ # A reservation is a mechanism used to guarantee slots to users.
"autoscale": { # Auto scaling settings. # The configuration parameters for the auto scaling feature.
"currentSlots": "A String", # Output only. The slot capacity added to this reservation when autoscale happens. Will be between [0, max_slots]. Note: after users reduce max_slots, it may take a while before it can be propagated, so current_slots may stay in the original value and could be larger than max_slots for that brief period (less than one minute)
"maxSlots": "A String", # Number of slots to be scaled when needed.
},
"concurrency": "A String", # Job concurrency target which sets a soft upper bound on the number of jobs that can run concurrently in this reservation. This is a soft target due to asynchronous nature of the system and various optimizations for small queries. Default value is 0 which means that concurrency target will be automatically computed by the system. NOTE: this field is exposed as target job concurrency in the Information Schema, DDL and BigQuery CLI.
"creationTime": "A String", # Output only. Creation time of the reservation.
"edition": "A String", # Edition of the reservation.
"ignoreIdleSlots": True or False, # If false, any query or pipeline job using this reservation will use idle slots from other reservations within the same admin project. If true, a query or pipeline job using this reservation will execute with the slot capacity specified in the slot_capacity field at most.
"labels": { # Optional. The labels associated with this reservation. You can use these to organize and group your reservations. You can set this property when inserting or updating a reservation.
"a_key": "A String",
},
"maxSlots": "A String", # Optional. The overall max slots for the reservation, covering slot_capacity (baseline), idle slots (if ignore_idle_slots is false) and scaled slots. If present, the reservation won't use more than the specified number of slots, even if there is demand and supply (from idle slots). NOTE: capping a reservation's idle slot usage is best effort and its usage may exceed the max_slots value. However, in terms of autoscale.current_slots (which accounts for the additional added slots), it will never exceed the max_slots - baseline. This field must be set together with the scaling_mode enum value, otherwise the request will be rejected with error code `google.rpc.Code.INVALID_ARGUMENT`. If the max_slots and scaling_mode are set, the autoscale or autoscale.max_slots field must be unset. Otherwise the request will be rejected with error code `google.rpc.Code.INVALID_ARGUMENT`. However, the autoscale field may still be in the output. The autopscale.max_slots will always show as 0 and the autoscaler.current_slots will represent the current slots from autoscaler excluding idle slots. For example, if the max_slots is 1000 and scaling_mode is AUTOSCALE_ONLY, then in the output, the autoscaler.max_slots will be 0 and the autoscaler.current_slots may be any value between 0 and 1000. If the max_slots is 1000, scaling_mode is ALL_SLOTS, the baseline is 100 and idle slots usage is 200, then in the output, the autoscaler.max_slots will be 0 and the autoscaler.current_slots will not be higher than 700. If the max_slots is 1000, scaling_mode is IDLE_SLOTS_ONLY, then in the output, the autoscaler field will be null. If the max_slots and scaling_mode are set, then the ignore_idle_slots field must be aligned with the scaling_mode enum value.(See details in ScalingMode comments). Otherwise the request will be rejected with error code `google.rpc.Code.INVALID_ARGUMENT`. Please note, the max_slots is for user to manage the part of slots greater than the baseline. Therefore, we don't allow users to set max_slots smaller or equal to the baseline as it will not be meaningful. If the field is present and slot_capacity>=max_slots, requests will be rejected with error code `google.rpc.Code.INVALID_ARGUMENT`. Please note that if max_slots is set to 0, we will treat it as unset. Customers can set max_slots to 0 and set scaling_mode to SCALING_MODE_UNSPECIFIED to disable the max_slots feature.
"multiRegionAuxiliary": True or False, # Applicable only for reservations located within one of the BigQuery multi-regions (US or EU). If set to true, this reservation is placed in the organization's secondary region which is designated for disaster recovery purposes. If false, this reservation is placed in the organization's default region. NOTE: this is a preview feature. Project must be allow-listed in order to set this field.
"name": "A String", # The resource name of the reservation, e.g., `projects/*/locations/*/reservations/team1-prod`. The reservation_id must only contain lower case alphanumeric characters or dashes. It must start with a letter and must not end with a dash. Its maximum length is 64 characters.
"originalPrimaryLocation": "A String", # Output only. The location where the reservation was originally created. This is set only during the failover reservation's creation. All billing charges for the failover reservation will be applied to this location.
"primaryLocation": "A String", # Output only. The current location of the reservation's primary replica. This field is only set for reservations using the managed disaster recovery feature.
"replicationStatus": { # Disaster Recovery(DR) replication status of the reservation. # Output only. The Disaster Recovery(DR) replication status of the reservation. This is only available for the primary replicas of DR/failover reservations and provides information about the both the staleness of the secondary and the last error encountered while trying to replicate changes from the primary to the secondary. If this field is blank, it means that the reservation is either not a DR reservation or the reservation is a DR secondary or that any replication operations on the reservation have succeeded.
"error": { # The `Status` type defines a logical error model that is suitable for different programming environments, including REST APIs and RPC APIs. It is used by [gRPC](https://github.com/grpc). Each `Status` message contains three pieces of data: error code, error message, and error details. You can find out more about this error model and how to work with it in the [API Design Guide](https://cloud.google.com/apis/design/errors). # Output only. The last error encountered while trying to replicate changes from the primary to the secondary. This field is only available if the replication has not succeeded since.
"code": 42, # The status code, which should be an enum value of google.rpc.Code.
"details": [ # A list of messages that carry the error details. There is a common set of message types for APIs to use.
{
"a_key": "", # Properties of the object. Contains field @type with type URL.
},
],
"message": "A String", # A developer-facing error message, which should be in English. Any user-facing error message should be localized and sent in the google.rpc.Status.details field, or localized by the client.
},
"lastErrorTime": "A String", # Output only. The time at which the last error was encountered while trying to replicate changes from the primary to the secondary. This field is only available if the replication has not succeeded since.
"lastReplicationTime": "A String", # Output only. A timestamp corresponding to the last change on the primary that was successfully replicated to the secondary.
},
"scalingMode": "A String", # The scaling mode for the reservation. If the field is present but max_slots is not present, requests will be rejected with error code `google.rpc.Code.INVALID_ARGUMENT`.
"secondaryLocation": "A String", # Optional. The current location of the reservation's secondary replica. This field is only set for reservations using the managed disaster recovery feature. Users can set this in create reservation calls to create a failover reservation or in update reservation calls to convert a non-failover reservation to a failover reservation(or vice versa).
"slotCapacity": "A String", # Baseline slots available to this reservation. A slot is a unit of computational power in BigQuery, and serves as the unit of parallelism. Queries using this reservation might use more slots during runtime if ignore_idle_slots is set to false, or autoscaling is enabled. The total slot_capacity of the reservation and its siblings may exceed the total slot_count of capacity commitments. In that case, the exceeding slots will be charged with the autoscale SKU. You can increase the number of baseline slots in a reservation every few minutes. If you want to decrease your baseline slots, you are limited to once an hour if you have recently changed your baseline slot capacity and your baseline slots exceed your committed slots. Otherwise, you can decrease your baseline slots every few minutes.
"updateTime": "A String", # Output only. Last update time of the reservation.
}
delete(name, x__xgafv=None)
Deletes a reservation. Returns `google.rpc.Code.FAILED_PRECONDITION` when reservation has assignments.
Args:
name: string, Required. Resource name of the reservation to retrieve. E.g., `projects/myproject/locations/US/reservations/team1-prod` (required)
x__xgafv: string, V1 error format.
Allowed values
1 - v1 error format
2 - v2 error format
Returns:
An object of the form:
{ # A generic empty message that you can re-use to avoid defining duplicated empty messages in your APIs. A typical example is to use it as the request or the response type of an API method. For instance: service Foo { rpc Bar(google.protobuf.Empty) returns (google.protobuf.Empty); }
}
failoverReservation(name, body=None, x__xgafv=None)
Fail over a reservation to the secondary location. The operation should be done in the current secondary location, which will be promoted to the new primary location for the reservation. Attempting to failover a reservation in the current primary location will fail with the error code `google.rpc.Code.FAILED_PRECONDITION`.
Args:
name: string, Required. Resource name of the reservation to failover. E.g., `projects/myproject/locations/US/reservations/team1-prod` (required)
body: object, The request body.
The object takes the form of:
{ # The request for ReservationService.FailoverReservation.
}
x__xgafv: string, V1 error format.
Allowed values
1 - v1 error format
2 - v2 error format
Returns:
An object of the form:
{ # A reservation is a mechanism used to guarantee slots to users.
"autoscale": { # Auto scaling settings. # The configuration parameters for the auto scaling feature.
"currentSlots": "A String", # Output only. The slot capacity added to this reservation when autoscale happens. Will be between [0, max_slots]. Note: after users reduce max_slots, it may take a while before it can be propagated, so current_slots may stay in the original value and could be larger than max_slots for that brief period (less than one minute)
"maxSlots": "A String", # Number of slots to be scaled when needed.
},
"concurrency": "A String", # Job concurrency target which sets a soft upper bound on the number of jobs that can run concurrently in this reservation. This is a soft target due to asynchronous nature of the system and various optimizations for small queries. Default value is 0 which means that concurrency target will be automatically computed by the system. NOTE: this field is exposed as target job concurrency in the Information Schema, DDL and BigQuery CLI.
"creationTime": "A String", # Output only. Creation time of the reservation.
"edition": "A String", # Edition of the reservation.
"ignoreIdleSlots": True or False, # If false, any query or pipeline job using this reservation will use idle slots from other reservations within the same admin project. If true, a query or pipeline job using this reservation will execute with the slot capacity specified in the slot_capacity field at most.
"labels": { # Optional. The labels associated with this reservation. You can use these to organize and group your reservations. You can set this property when inserting or updating a reservation.
"a_key": "A String",
},
"maxSlots": "A String", # Optional. The overall max slots for the reservation, covering slot_capacity (baseline), idle slots (if ignore_idle_slots is false) and scaled slots. If present, the reservation won't use more than the specified number of slots, even if there is demand and supply (from idle slots). NOTE: capping a reservation's idle slot usage is best effort and its usage may exceed the max_slots value. However, in terms of autoscale.current_slots (which accounts for the additional added slots), it will never exceed the max_slots - baseline. This field must be set together with the scaling_mode enum value, otherwise the request will be rejected with error code `google.rpc.Code.INVALID_ARGUMENT`. If the max_slots and scaling_mode are set, the autoscale or autoscale.max_slots field must be unset. Otherwise the request will be rejected with error code `google.rpc.Code.INVALID_ARGUMENT`. However, the autoscale field may still be in the output. The autopscale.max_slots will always show as 0 and the autoscaler.current_slots will represent the current slots from autoscaler excluding idle slots. For example, if the max_slots is 1000 and scaling_mode is AUTOSCALE_ONLY, then in the output, the autoscaler.max_slots will be 0 and the autoscaler.current_slots may be any value between 0 and 1000. If the max_slots is 1000, scaling_mode is ALL_SLOTS, the baseline is 100 and idle slots usage is 200, then in the output, the autoscaler.max_slots will be 0 and the autoscaler.current_slots will not be higher than 700. If the max_slots is 1000, scaling_mode is IDLE_SLOTS_ONLY, then in the output, the autoscaler field will be null. If the max_slots and scaling_mode are set, then the ignore_idle_slots field must be aligned with the scaling_mode enum value.(See details in ScalingMode comments). Otherwise the request will be rejected with error code `google.rpc.Code.INVALID_ARGUMENT`. Please note, the max_slots is for user to manage the part of slots greater than the baseline. Therefore, we don't allow users to set max_slots smaller or equal to the baseline as it will not be meaningful. If the field is present and slot_capacity>=max_slots, requests will be rejected with error code `google.rpc.Code.INVALID_ARGUMENT`. Please note that if max_slots is set to 0, we will treat it as unset. Customers can set max_slots to 0 and set scaling_mode to SCALING_MODE_UNSPECIFIED to disable the max_slots feature.
"multiRegionAuxiliary": True or False, # Applicable only for reservations located within one of the BigQuery multi-regions (US or EU). If set to true, this reservation is placed in the organization's secondary region which is designated for disaster recovery purposes. If false, this reservation is placed in the organization's default region. NOTE: this is a preview feature. Project must be allow-listed in order to set this field.
"name": "A String", # The resource name of the reservation, e.g., `projects/*/locations/*/reservations/team1-prod`. The reservation_id must only contain lower case alphanumeric characters or dashes. It must start with a letter and must not end with a dash. Its maximum length is 64 characters.
"originalPrimaryLocation": "A String", # Output only. The location where the reservation was originally created. This is set only during the failover reservation's creation. All billing charges for the failover reservation will be applied to this location.
"primaryLocation": "A String", # Output only. The current location of the reservation's primary replica. This field is only set for reservations using the managed disaster recovery feature.
"replicationStatus": { # Disaster Recovery(DR) replication status of the reservation. # Output only. The Disaster Recovery(DR) replication status of the reservation. This is only available for the primary replicas of DR/failover reservations and provides information about the both the staleness of the secondary and the last error encountered while trying to replicate changes from the primary to the secondary. If this field is blank, it means that the reservation is either not a DR reservation or the reservation is a DR secondary or that any replication operations on the reservation have succeeded.
"error": { # The `Status` type defines a logical error model that is suitable for different programming environments, including REST APIs and RPC APIs. It is used by [gRPC](https://github.com/grpc). Each `Status` message contains three pieces of data: error code, error message, and error details. You can find out more about this error model and how to work with it in the [API Design Guide](https://cloud.google.com/apis/design/errors). # Output only. The last error encountered while trying to replicate changes from the primary to the secondary. This field is only available if the replication has not succeeded since.
"code": 42, # The status code, which should be an enum value of google.rpc.Code.
"details": [ # A list of messages that carry the error details. There is a common set of message types for APIs to use.
{
"a_key": "", # Properties of the object. Contains field @type with type URL.
},
],
"message": "A String", # A developer-facing error message, which should be in English. Any user-facing error message should be localized and sent in the google.rpc.Status.details field, or localized by the client.
},
"lastErrorTime": "A String", # Output only. The time at which the last error was encountered while trying to replicate changes from the primary to the secondary. This field is only available if the replication has not succeeded since.
"lastReplicationTime": "A String", # Output only. A timestamp corresponding to the last change on the primary that was successfully replicated to the secondary.
},
"scalingMode": "A String", # The scaling mode for the reservation. If the field is present but max_slots is not present, requests will be rejected with error code `google.rpc.Code.INVALID_ARGUMENT`.
"secondaryLocation": "A String", # Optional. The current location of the reservation's secondary replica. This field is only set for reservations using the managed disaster recovery feature. Users can set this in create reservation calls to create a failover reservation or in update reservation calls to convert a non-failover reservation to a failover reservation(or vice versa).
"slotCapacity": "A String", # Baseline slots available to this reservation. A slot is a unit of computational power in BigQuery, and serves as the unit of parallelism. Queries using this reservation might use more slots during runtime if ignore_idle_slots is set to false, or autoscaling is enabled. The total slot_capacity of the reservation and its siblings may exceed the total slot_count of capacity commitments. In that case, the exceeding slots will be charged with the autoscale SKU. You can increase the number of baseline slots in a reservation every few minutes. If you want to decrease your baseline slots, you are limited to once an hour if you have recently changed your baseline slot capacity and your baseline slots exceed your committed slots. Otherwise, you can decrease your baseline slots every few minutes.
"updateTime": "A String", # Output only. Last update time of the reservation.
}
get(name, x__xgafv=None)
Returns information about the reservation.
Args:
name: string, Required. Resource name of the reservation to retrieve. E.g., `projects/myproject/locations/US/reservations/team1-prod` (required)
x__xgafv: string, V1 error format.
Allowed values
1 - v1 error format
2 - v2 error format
Returns:
An object of the form:
{ # A reservation is a mechanism used to guarantee slots to users.
"autoscale": { # Auto scaling settings. # The configuration parameters for the auto scaling feature.
"currentSlots": "A String", # Output only. The slot capacity added to this reservation when autoscale happens. Will be between [0, max_slots]. Note: after users reduce max_slots, it may take a while before it can be propagated, so current_slots may stay in the original value and could be larger than max_slots for that brief period (less than one minute)
"maxSlots": "A String", # Number of slots to be scaled when needed.
},
"concurrency": "A String", # Job concurrency target which sets a soft upper bound on the number of jobs that can run concurrently in this reservation. This is a soft target due to asynchronous nature of the system and various optimizations for small queries. Default value is 0 which means that concurrency target will be automatically computed by the system. NOTE: this field is exposed as target job concurrency in the Information Schema, DDL and BigQuery CLI.
"creationTime": "A String", # Output only. Creation time of the reservation.
"edition": "A String", # Edition of the reservation.
"ignoreIdleSlots": True or False, # If false, any query or pipeline job using this reservation will use idle slots from other reservations within the same admin project. If true, a query or pipeline job using this reservation will execute with the slot capacity specified in the slot_capacity field at most.
"labels": { # Optional. The labels associated with this reservation. You can use these to organize and group your reservations. You can set this property when inserting or updating a reservation.
"a_key": "A String",
},
"maxSlots": "A String", # Optional. The overall max slots for the reservation, covering slot_capacity (baseline), idle slots (if ignore_idle_slots is false) and scaled slots. If present, the reservation won't use more than the specified number of slots, even if there is demand and supply (from idle slots). NOTE: capping a reservation's idle slot usage is best effort and its usage may exceed the max_slots value. However, in terms of autoscale.current_slots (which accounts for the additional added slots), it will never exceed the max_slots - baseline. This field must be set together with the scaling_mode enum value, otherwise the request will be rejected with error code `google.rpc.Code.INVALID_ARGUMENT`. If the max_slots and scaling_mode are set, the autoscale or autoscale.max_slots field must be unset. Otherwise the request will be rejected with error code `google.rpc.Code.INVALID_ARGUMENT`. However, the autoscale field may still be in the output. The autopscale.max_slots will always show as 0 and the autoscaler.current_slots will represent the current slots from autoscaler excluding idle slots. For example, if the max_slots is 1000 and scaling_mode is AUTOSCALE_ONLY, then in the output, the autoscaler.max_slots will be 0 and the autoscaler.current_slots may be any value between 0 and 1000. If the max_slots is 1000, scaling_mode is ALL_SLOTS, the baseline is 100 and idle slots usage is 200, then in the output, the autoscaler.max_slots will be 0 and the autoscaler.current_slots will not be higher than 700. If the max_slots is 1000, scaling_mode is IDLE_SLOTS_ONLY, then in the output, the autoscaler field will be null. If the max_slots and scaling_mode are set, then the ignore_idle_slots field must be aligned with the scaling_mode enum value.(See details in ScalingMode comments). Otherwise the request will be rejected with error code `google.rpc.Code.INVALID_ARGUMENT`. Please note, the max_slots is for user to manage the part of slots greater than the baseline. Therefore, we don't allow users to set max_slots smaller or equal to the baseline as it will not be meaningful. If the field is present and slot_capacity>=max_slots, requests will be rejected with error code `google.rpc.Code.INVALID_ARGUMENT`. Please note that if max_slots is set to 0, we will treat it as unset. Customers can set max_slots to 0 and set scaling_mode to SCALING_MODE_UNSPECIFIED to disable the max_slots feature.
"multiRegionAuxiliary": True or False, # Applicable only for reservations located within one of the BigQuery multi-regions (US or EU). If set to true, this reservation is placed in the organization's secondary region which is designated for disaster recovery purposes. If false, this reservation is placed in the organization's default region. NOTE: this is a preview feature. Project must be allow-listed in order to set this field.
"name": "A String", # The resource name of the reservation, e.g., `projects/*/locations/*/reservations/team1-prod`. The reservation_id must only contain lower case alphanumeric characters or dashes. It must start with a letter and must not end with a dash. Its maximum length is 64 characters.
"originalPrimaryLocation": "A String", # Output only. The location where the reservation was originally created. This is set only during the failover reservation's creation. All billing charges for the failover reservation will be applied to this location.
"primaryLocation": "A String", # Output only. The current location of the reservation's primary replica. This field is only set for reservations using the managed disaster recovery feature.
"replicationStatus": { # Disaster Recovery(DR) replication status of the reservation. # Output only. The Disaster Recovery(DR) replication status of the reservation. This is only available for the primary replicas of DR/failover reservations and provides information about the both the staleness of the secondary and the last error encountered while trying to replicate changes from the primary to the secondary. If this field is blank, it means that the reservation is either not a DR reservation or the reservation is a DR secondary or that any replication operations on the reservation have succeeded.
"error": { # The `Status` type defines a logical error model that is suitable for different programming environments, including REST APIs and RPC APIs. It is used by [gRPC](https://github.com/grpc). Each `Status` message contains three pieces of data: error code, error message, and error details. You can find out more about this error model and how to work with it in the [API Design Guide](https://cloud.google.com/apis/design/errors). # Output only. The last error encountered while trying to replicate changes from the primary to the secondary. This field is only available if the replication has not succeeded since.
"code": 42, # The status code, which should be an enum value of google.rpc.Code.
"details": [ # A list of messages that carry the error details. There is a common set of message types for APIs to use.
{
"a_key": "", # Properties of the object. Contains field @type with type URL.
},
],
"message": "A String", # A developer-facing error message, which should be in English. Any user-facing error message should be localized and sent in the google.rpc.Status.details field, or localized by the client.
},
"lastErrorTime": "A String", # Output only. The time at which the last error was encountered while trying to replicate changes from the primary to the secondary. This field is only available if the replication has not succeeded since.
"lastReplicationTime": "A String", # Output only. A timestamp corresponding to the last change on the primary that was successfully replicated to the secondary.
},
"scalingMode": "A String", # The scaling mode for the reservation. If the field is present but max_slots is not present, requests will be rejected with error code `google.rpc.Code.INVALID_ARGUMENT`.
"secondaryLocation": "A String", # Optional. The current location of the reservation's secondary replica. This field is only set for reservations using the managed disaster recovery feature. Users can set this in create reservation calls to create a failover reservation or in update reservation calls to convert a non-failover reservation to a failover reservation(or vice versa).
"slotCapacity": "A String", # Baseline slots available to this reservation. A slot is a unit of computational power in BigQuery, and serves as the unit of parallelism. Queries using this reservation might use more slots during runtime if ignore_idle_slots is set to false, or autoscaling is enabled. The total slot_capacity of the reservation and its siblings may exceed the total slot_count of capacity commitments. In that case, the exceeding slots will be charged with the autoscale SKU. You can increase the number of baseline slots in a reservation every few minutes. If you want to decrease your baseline slots, you are limited to once an hour if you have recently changed your baseline slot capacity and your baseline slots exceed your committed slots. Otherwise, you can decrease your baseline slots every few minutes.
"updateTime": "A String", # Output only. Last update time of the reservation.
}
list(parent, pageSize=None, pageToken=None, x__xgafv=None)
Lists all the reservations for the project in the specified location.
Args:
parent: string, Required. The parent resource name containing project and location, e.g.: `projects/myproject/locations/US` (required)
pageSize: integer, The maximum number of items to return per page.
pageToken: string, The next_page_token value returned from a previous List request, if any.
x__xgafv: string, V1 error format.
Allowed values
1 - v1 error format
2 - v2 error format
Returns:
An object of the form:
{ # The response for ReservationService.ListReservations.
"nextPageToken": "A String", # Token to retrieve the next page of results, or empty if there are no more results in the list.
"reservations": [ # List of reservations visible to the user.
{ # A reservation is a mechanism used to guarantee slots to users.
"autoscale": { # Auto scaling settings. # The configuration parameters for the auto scaling feature.
"currentSlots": "A String", # Output only. The slot capacity added to this reservation when autoscale happens. Will be between [0, max_slots]. Note: after users reduce max_slots, it may take a while before it can be propagated, so current_slots may stay in the original value and could be larger than max_slots for that brief period (less than one minute)
"maxSlots": "A String", # Number of slots to be scaled when needed.
},
"concurrency": "A String", # Job concurrency target which sets a soft upper bound on the number of jobs that can run concurrently in this reservation. This is a soft target due to asynchronous nature of the system and various optimizations for small queries. Default value is 0 which means that concurrency target will be automatically computed by the system. NOTE: this field is exposed as target job concurrency in the Information Schema, DDL and BigQuery CLI.
"creationTime": "A String", # Output only. Creation time of the reservation.
"edition": "A String", # Edition of the reservation.
"ignoreIdleSlots": True or False, # If false, any query or pipeline job using this reservation will use idle slots from other reservations within the same admin project. If true, a query or pipeline job using this reservation will execute with the slot capacity specified in the slot_capacity field at most.
"labels": { # Optional. The labels associated with this reservation. You can use these to organize and group your reservations. You can set this property when inserting or updating a reservation.
"a_key": "A String",
},
"maxSlots": "A String", # Optional. The overall max slots for the reservation, covering slot_capacity (baseline), idle slots (if ignore_idle_slots is false) and scaled slots. If present, the reservation won't use more than the specified number of slots, even if there is demand and supply (from idle slots). NOTE: capping a reservation's idle slot usage is best effort and its usage may exceed the max_slots value. However, in terms of autoscale.current_slots (which accounts for the additional added slots), it will never exceed the max_slots - baseline. This field must be set together with the scaling_mode enum value, otherwise the request will be rejected with error code `google.rpc.Code.INVALID_ARGUMENT`. If the max_slots and scaling_mode are set, the autoscale or autoscale.max_slots field must be unset. Otherwise the request will be rejected with error code `google.rpc.Code.INVALID_ARGUMENT`. However, the autoscale field may still be in the output. The autopscale.max_slots will always show as 0 and the autoscaler.current_slots will represent the current slots from autoscaler excluding idle slots. For example, if the max_slots is 1000 and scaling_mode is AUTOSCALE_ONLY, then in the output, the autoscaler.max_slots will be 0 and the autoscaler.current_slots may be any value between 0 and 1000. If the max_slots is 1000, scaling_mode is ALL_SLOTS, the baseline is 100 and idle slots usage is 200, then in the output, the autoscaler.max_slots will be 0 and the autoscaler.current_slots will not be higher than 700. If the max_slots is 1000, scaling_mode is IDLE_SLOTS_ONLY, then in the output, the autoscaler field will be null. If the max_slots and scaling_mode are set, then the ignore_idle_slots field must be aligned with the scaling_mode enum value.(See details in ScalingMode comments). Otherwise the request will be rejected with error code `google.rpc.Code.INVALID_ARGUMENT`. Please note, the max_slots is for user to manage the part of slots greater than the baseline. Therefore, we don't allow users to set max_slots smaller or equal to the baseline as it will not be meaningful. If the field is present and slot_capacity>=max_slots, requests will be rejected with error code `google.rpc.Code.INVALID_ARGUMENT`. Please note that if max_slots is set to 0, we will treat it as unset. Customers can set max_slots to 0 and set scaling_mode to SCALING_MODE_UNSPECIFIED to disable the max_slots feature.
"multiRegionAuxiliary": True or False, # Applicable only for reservations located within one of the BigQuery multi-regions (US or EU). If set to true, this reservation is placed in the organization's secondary region which is designated for disaster recovery purposes. If false, this reservation is placed in the organization's default region. NOTE: this is a preview feature. Project must be allow-listed in order to set this field.
"name": "A String", # The resource name of the reservation, e.g., `projects/*/locations/*/reservations/team1-prod`. The reservation_id must only contain lower case alphanumeric characters or dashes. It must start with a letter and must not end with a dash. Its maximum length is 64 characters.
"originalPrimaryLocation": "A String", # Output only. The location where the reservation was originally created. This is set only during the failover reservation's creation. All billing charges for the failover reservation will be applied to this location.
"primaryLocation": "A String", # Output only. The current location of the reservation's primary replica. This field is only set for reservations using the managed disaster recovery feature.
"replicationStatus": { # Disaster Recovery(DR) replication status of the reservation. # Output only. The Disaster Recovery(DR) replication status of the reservation. This is only available for the primary replicas of DR/failover reservations and provides information about the both the staleness of the secondary and the last error encountered while trying to replicate changes from the primary to the secondary. If this field is blank, it means that the reservation is either not a DR reservation or the reservation is a DR secondary or that any replication operations on the reservation have succeeded.
"error": { # The `Status` type defines a logical error model that is suitable for different programming environments, including REST APIs and RPC APIs. It is used by [gRPC](https://github.com/grpc). Each `Status` message contains three pieces of data: error code, error message, and error details. You can find out more about this error model and how to work with it in the [API Design Guide](https://cloud.google.com/apis/design/errors). # Output only. The last error encountered while trying to replicate changes from the primary to the secondary. This field is only available if the replication has not succeeded since.
"code": 42, # The status code, which should be an enum value of google.rpc.Code.
"details": [ # A list of messages that carry the error details. There is a common set of message types for APIs to use.
{
"a_key": "", # Properties of the object. Contains field @type with type URL.
},
],
"message": "A String", # A developer-facing error message, which should be in English. Any user-facing error message should be localized and sent in the google.rpc.Status.details field, or localized by the client.
},
"lastErrorTime": "A String", # Output only. The time at which the last error was encountered while trying to replicate changes from the primary to the secondary. This field is only available if the replication has not succeeded since.
"lastReplicationTime": "A String", # Output only. A timestamp corresponding to the last change on the primary that was successfully replicated to the secondary.
},
"scalingMode": "A String", # The scaling mode for the reservation. If the field is present but max_slots is not present, requests will be rejected with error code `google.rpc.Code.INVALID_ARGUMENT`.
"secondaryLocation": "A String", # Optional. The current location of the reservation's secondary replica. This field is only set for reservations using the managed disaster recovery feature. Users can set this in create reservation calls to create a failover reservation or in update reservation calls to convert a non-failover reservation to a failover reservation(or vice versa).
"slotCapacity": "A String", # Baseline slots available to this reservation. A slot is a unit of computational power in BigQuery, and serves as the unit of parallelism. Queries using this reservation might use more slots during runtime if ignore_idle_slots is set to false, or autoscaling is enabled. The total slot_capacity of the reservation and its siblings may exceed the total slot_count of capacity commitments. In that case, the exceeding slots will be charged with the autoscale SKU. You can increase the number of baseline slots in a reservation every few minutes. If you want to decrease your baseline slots, you are limited to once an hour if you have recently changed your baseline slot capacity and your baseline slots exceed your committed slots. Otherwise, you can decrease your baseline slots every few minutes.
"updateTime": "A String", # Output only. Last update time of the reservation.
},
],
}
list_next()
Retrieves the next page of results.
Args:
previous_request: The request for the previous page. (required)
previous_response: The response from the request for the previous page. (required)
Returns:
A request object that you can call 'execute()' on to request the next
page. Returns None if there are no more items in the collection.
patch(name, body=None, updateMask=None, x__xgafv=None)
Updates an existing reservation resource.
Args:
name: string, The resource name of the reservation, e.g., `projects/*/locations/*/reservations/team1-prod`. The reservation_id must only contain lower case alphanumeric characters or dashes. It must start with a letter and must not end with a dash. Its maximum length is 64 characters. (required)
body: object, The request body.
The object takes the form of:
{ # A reservation is a mechanism used to guarantee slots to users.
"autoscale": { # Auto scaling settings. # The configuration parameters for the auto scaling feature.
"currentSlots": "A String", # Output only. The slot capacity added to this reservation when autoscale happens. Will be between [0, max_slots]. Note: after users reduce max_slots, it may take a while before it can be propagated, so current_slots may stay in the original value and could be larger than max_slots for that brief period (less than one minute)
"maxSlots": "A String", # Number of slots to be scaled when needed.
},
"concurrency": "A String", # Job concurrency target which sets a soft upper bound on the number of jobs that can run concurrently in this reservation. This is a soft target due to asynchronous nature of the system and various optimizations for small queries. Default value is 0 which means that concurrency target will be automatically computed by the system. NOTE: this field is exposed as target job concurrency in the Information Schema, DDL and BigQuery CLI.
"creationTime": "A String", # Output only. Creation time of the reservation.
"edition": "A String", # Edition of the reservation.
"ignoreIdleSlots": True or False, # If false, any query or pipeline job using this reservation will use idle slots from other reservations within the same admin project. If true, a query or pipeline job using this reservation will execute with the slot capacity specified in the slot_capacity field at most.
"labels": { # Optional. The labels associated with this reservation. You can use these to organize and group your reservations. You can set this property when inserting or updating a reservation.
"a_key": "A String",
},
"maxSlots": "A String", # Optional. The overall max slots for the reservation, covering slot_capacity (baseline), idle slots (if ignore_idle_slots is false) and scaled slots. If present, the reservation won't use more than the specified number of slots, even if there is demand and supply (from idle slots). NOTE: capping a reservation's idle slot usage is best effort and its usage may exceed the max_slots value. However, in terms of autoscale.current_slots (which accounts for the additional added slots), it will never exceed the max_slots - baseline. This field must be set together with the scaling_mode enum value, otherwise the request will be rejected with error code `google.rpc.Code.INVALID_ARGUMENT`. If the max_slots and scaling_mode are set, the autoscale or autoscale.max_slots field must be unset. Otherwise the request will be rejected with error code `google.rpc.Code.INVALID_ARGUMENT`. However, the autoscale field may still be in the output. The autopscale.max_slots will always show as 0 and the autoscaler.current_slots will represent the current slots from autoscaler excluding idle slots. For example, if the max_slots is 1000 and scaling_mode is AUTOSCALE_ONLY, then in the output, the autoscaler.max_slots will be 0 and the autoscaler.current_slots may be any value between 0 and 1000. If the max_slots is 1000, scaling_mode is ALL_SLOTS, the baseline is 100 and idle slots usage is 200, then in the output, the autoscaler.max_slots will be 0 and the autoscaler.current_slots will not be higher than 700. If the max_slots is 1000, scaling_mode is IDLE_SLOTS_ONLY, then in the output, the autoscaler field will be null. If the max_slots and scaling_mode are set, then the ignore_idle_slots field must be aligned with the scaling_mode enum value.(See details in ScalingMode comments). Otherwise the request will be rejected with error code `google.rpc.Code.INVALID_ARGUMENT`. Please note, the max_slots is for user to manage the part of slots greater than the baseline. Therefore, we don't allow users to set max_slots smaller or equal to the baseline as it will not be meaningful. If the field is present and slot_capacity>=max_slots, requests will be rejected with error code `google.rpc.Code.INVALID_ARGUMENT`. Please note that if max_slots is set to 0, we will treat it as unset. Customers can set max_slots to 0 and set scaling_mode to SCALING_MODE_UNSPECIFIED to disable the max_slots feature.
"multiRegionAuxiliary": True or False, # Applicable only for reservations located within one of the BigQuery multi-regions (US or EU). If set to true, this reservation is placed in the organization's secondary region which is designated for disaster recovery purposes. If false, this reservation is placed in the organization's default region. NOTE: this is a preview feature. Project must be allow-listed in order to set this field.
"name": "A String", # The resource name of the reservation, e.g., `projects/*/locations/*/reservations/team1-prod`. The reservation_id must only contain lower case alphanumeric characters or dashes. It must start with a letter and must not end with a dash. Its maximum length is 64 characters.
"originalPrimaryLocation": "A String", # Output only. The location where the reservation was originally created. This is set only during the failover reservation's creation. All billing charges for the failover reservation will be applied to this location.
"primaryLocation": "A String", # Output only. The current location of the reservation's primary replica. This field is only set for reservations using the managed disaster recovery feature.
"replicationStatus": { # Disaster Recovery(DR) replication status of the reservation. # Output only. The Disaster Recovery(DR) replication status of the reservation. This is only available for the primary replicas of DR/failover reservations and provides information about the both the staleness of the secondary and the last error encountered while trying to replicate changes from the primary to the secondary. If this field is blank, it means that the reservation is either not a DR reservation or the reservation is a DR secondary or that any replication operations on the reservation have succeeded.
"error": { # The `Status` type defines a logical error model that is suitable for different programming environments, including REST APIs and RPC APIs. It is used by [gRPC](https://github.com/grpc). Each `Status` message contains three pieces of data: error code, error message, and error details. You can find out more about this error model and how to work with it in the [API Design Guide](https://cloud.google.com/apis/design/errors). # Output only. The last error encountered while trying to replicate changes from the primary to the secondary. This field is only available if the replication has not succeeded since.
"code": 42, # The status code, which should be an enum value of google.rpc.Code.
"details": [ # A list of messages that carry the error details. There is a common set of message types for APIs to use.
{
"a_key": "", # Properties of the object. Contains field @type with type URL.
},
],
"message": "A String", # A developer-facing error message, which should be in English. Any user-facing error message should be localized and sent in the google.rpc.Status.details field, or localized by the client.
},
"lastErrorTime": "A String", # Output only. The time at which the last error was encountered while trying to replicate changes from the primary to the secondary. This field is only available if the replication has not succeeded since.
"lastReplicationTime": "A String", # Output only. A timestamp corresponding to the last change on the primary that was successfully replicated to the secondary.
},
"scalingMode": "A String", # The scaling mode for the reservation. If the field is present but max_slots is not present, requests will be rejected with error code `google.rpc.Code.INVALID_ARGUMENT`.
"secondaryLocation": "A String", # Optional. The current location of the reservation's secondary replica. This field is only set for reservations using the managed disaster recovery feature. Users can set this in create reservation calls to create a failover reservation or in update reservation calls to convert a non-failover reservation to a failover reservation(or vice versa).
"slotCapacity": "A String", # Baseline slots available to this reservation. A slot is a unit of computational power in BigQuery, and serves as the unit of parallelism. Queries using this reservation might use more slots during runtime if ignore_idle_slots is set to false, or autoscaling is enabled. The total slot_capacity of the reservation and its siblings may exceed the total slot_count of capacity commitments. In that case, the exceeding slots will be charged with the autoscale SKU. You can increase the number of baseline slots in a reservation every few minutes. If you want to decrease your baseline slots, you are limited to once an hour if you have recently changed your baseline slot capacity and your baseline slots exceed your committed slots. Otherwise, you can decrease your baseline slots every few minutes.
"updateTime": "A String", # Output only. Last update time of the reservation.
}
updateMask: string, Standard field mask for the set of fields to be updated.
x__xgafv: string, V1 error format.
Allowed values
1 - v1 error format
2 - v2 error format
Returns:
An object of the form:
{ # A reservation is a mechanism used to guarantee slots to users.
"autoscale": { # Auto scaling settings. # The configuration parameters for the auto scaling feature.
"currentSlots": "A String", # Output only. The slot capacity added to this reservation when autoscale happens. Will be between [0, max_slots]. Note: after users reduce max_slots, it may take a while before it can be propagated, so current_slots may stay in the original value and could be larger than max_slots for that brief period (less than one minute)
"maxSlots": "A String", # Number of slots to be scaled when needed.
},
"concurrency": "A String", # Job concurrency target which sets a soft upper bound on the number of jobs that can run concurrently in this reservation. This is a soft target due to asynchronous nature of the system and various optimizations for small queries. Default value is 0 which means that concurrency target will be automatically computed by the system. NOTE: this field is exposed as target job concurrency in the Information Schema, DDL and BigQuery CLI.
"creationTime": "A String", # Output only. Creation time of the reservation.
"edition": "A String", # Edition of the reservation.
"ignoreIdleSlots": True or False, # If false, any query or pipeline job using this reservation will use idle slots from other reservations within the same admin project. If true, a query or pipeline job using this reservation will execute with the slot capacity specified in the slot_capacity field at most.
"labels": { # Optional. The labels associated with this reservation. You can use these to organize and group your reservations. You can set this property when inserting or updating a reservation.
"a_key": "A String",
},
"maxSlots": "A String", # Optional. The overall max slots for the reservation, covering slot_capacity (baseline), idle slots (if ignore_idle_slots is false) and scaled slots. If present, the reservation won't use more than the specified number of slots, even if there is demand and supply (from idle slots). NOTE: capping a reservation's idle slot usage is best effort and its usage may exceed the max_slots value. However, in terms of autoscale.current_slots (which accounts for the additional added slots), it will never exceed the max_slots - baseline. This field must be set together with the scaling_mode enum value, otherwise the request will be rejected with error code `google.rpc.Code.INVALID_ARGUMENT`. If the max_slots and scaling_mode are set, the autoscale or autoscale.max_slots field must be unset. Otherwise the request will be rejected with error code `google.rpc.Code.INVALID_ARGUMENT`. However, the autoscale field may still be in the output. The autopscale.max_slots will always show as 0 and the autoscaler.current_slots will represent the current slots from autoscaler excluding idle slots. For example, if the max_slots is 1000 and scaling_mode is AUTOSCALE_ONLY, then in the output, the autoscaler.max_slots will be 0 and the autoscaler.current_slots may be any value between 0 and 1000. If the max_slots is 1000, scaling_mode is ALL_SLOTS, the baseline is 100 and idle slots usage is 200, then in the output, the autoscaler.max_slots will be 0 and the autoscaler.current_slots will not be higher than 700. If the max_slots is 1000, scaling_mode is IDLE_SLOTS_ONLY, then in the output, the autoscaler field will be null. If the max_slots and scaling_mode are set, then the ignore_idle_slots field must be aligned with the scaling_mode enum value.(See details in ScalingMode comments). Otherwise the request will be rejected with error code `google.rpc.Code.INVALID_ARGUMENT`. Please note, the max_slots is for user to manage the part of slots greater than the baseline. Therefore, we don't allow users to set max_slots smaller or equal to the baseline as it will not be meaningful. If the field is present and slot_capacity>=max_slots, requests will be rejected with error code `google.rpc.Code.INVALID_ARGUMENT`. Please note that if max_slots is set to 0, we will treat it as unset. Customers can set max_slots to 0 and set scaling_mode to SCALING_MODE_UNSPECIFIED to disable the max_slots feature.
"multiRegionAuxiliary": True or False, # Applicable only for reservations located within one of the BigQuery multi-regions (US or EU). If set to true, this reservation is placed in the organization's secondary region which is designated for disaster recovery purposes. If false, this reservation is placed in the organization's default region. NOTE: this is a preview feature. Project must be allow-listed in order to set this field.
"name": "A String", # The resource name of the reservation, e.g., `projects/*/locations/*/reservations/team1-prod`. The reservation_id must only contain lower case alphanumeric characters or dashes. It must start with a letter and must not end with a dash. Its maximum length is 64 characters.
"originalPrimaryLocation": "A String", # Output only. The location where the reservation was originally created. This is set only during the failover reservation's creation. All billing charges for the failover reservation will be applied to this location.
"primaryLocation": "A String", # Output only. The current location of the reservation's primary replica. This field is only set for reservations using the managed disaster recovery feature.
"replicationStatus": { # Disaster Recovery(DR) replication status of the reservation. # Output only. The Disaster Recovery(DR) replication status of the reservation. This is only available for the primary replicas of DR/failover reservations and provides information about the both the staleness of the secondary and the last error encountered while trying to replicate changes from the primary to the secondary. If this field is blank, it means that the reservation is either not a DR reservation or the reservation is a DR secondary or that any replication operations on the reservation have succeeded.
"error": { # The `Status` type defines a logical error model that is suitable for different programming environments, including REST APIs and RPC APIs. It is used by [gRPC](https://github.com/grpc). Each `Status` message contains three pieces of data: error code, error message, and error details. You can find out more about this error model and how to work with it in the [API Design Guide](https://cloud.google.com/apis/design/errors). # Output only. The last error encountered while trying to replicate changes from the primary to the secondary. This field is only available if the replication has not succeeded since.
"code": 42, # The status code, which should be an enum value of google.rpc.Code.
"details": [ # A list of messages that carry the error details. There is a common set of message types for APIs to use.
{
"a_key": "", # Properties of the object. Contains field @type with type URL.
},
],
"message": "A String", # A developer-facing error message, which should be in English. Any user-facing error message should be localized and sent in the google.rpc.Status.details field, or localized by the client.
},
"lastErrorTime": "A String", # Output only. The time at which the last error was encountered while trying to replicate changes from the primary to the secondary. This field is only available if the replication has not succeeded since.
"lastReplicationTime": "A String", # Output only. A timestamp corresponding to the last change on the primary that was successfully replicated to the secondary.
},
"scalingMode": "A String", # The scaling mode for the reservation. If the field is present but max_slots is not present, requests will be rejected with error code `google.rpc.Code.INVALID_ARGUMENT`.
"secondaryLocation": "A String", # Optional. The current location of the reservation's secondary replica. This field is only set for reservations using the managed disaster recovery feature. Users can set this in create reservation calls to create a failover reservation or in update reservation calls to convert a non-failover reservation to a failover reservation(or vice versa).
"slotCapacity": "A String", # Baseline slots available to this reservation. A slot is a unit of computational power in BigQuery, and serves as the unit of parallelism. Queries using this reservation might use more slots during runtime if ignore_idle_slots is set to false, or autoscaling is enabled. The total slot_capacity of the reservation and its siblings may exceed the total slot_count of capacity commitments. In that case, the exceeding slots will be charged with the autoscale SKU. You can increase the number of baseline slots in a reservation every few minutes. If you want to decrease your baseline slots, you are limited to once an hour if you have recently changed your baseline slot capacity and your baseline slots exceed your committed slots. Otherwise, you can decrease your baseline slots every few minutes.
"updateTime": "A String", # Output only. Last update time of the reservation.
}