cancel(project, zone, instanceGroupManager, resizeRequest, requestId=None, x__xgafv=None)
Cancels the specified resize request and removes it from the queue. Cancelled resize request does no longer wait for the resources to be provisioned. Cancel is only possible for requests that are accepted in the queue.
Close httplib2 connections.
delete(project, zone, instanceGroupManager, resizeRequest, requestId=None, x__xgafv=None)
Deletes the specified, inactive resize request. Requests that are still active cannot be deleted. Deleting request does not delete instances that were provisioned previously.
get(project, zone, instanceGroupManager, resizeRequest, x__xgafv=None)
Returns all of the details about the specified resize request.
insert(project, zone, instanceGroupManager, body=None, requestId=None, x__xgafv=None)
Creates a new resize request that starts provisioning VMs immediately or queues VM creation.
Retrieves a list of resize requests that are contained in the managed instance group.
Retrieves the next page of results.
cancel(project, zone, instanceGroupManager, resizeRequest, requestId=None, x__xgafv=None)
Cancels the specified resize request and removes it from the queue. Cancelled resize request does no longer wait for the resources to be provisioned. Cancel is only possible for requests that are accepted in the queue.
Args:
project: string, Project ID for this request. (required)
zone: string, The name of the zone where the managed instance group is located. The name should conform to RFC1035. (required)
instanceGroupManager: string, The name of the managed instance group. The name should conform to RFC1035 or be a resource ID. (required)
resizeRequest: string, The name of the resize request to cancel. The name should conform to RFC1035 or be a resource ID. (required)
requestId: string, An optional request ID to identify requests. Specify a unique request ID so that if you must retry your request, the server will know to ignore the request if it has already been completed. For example, consider a situation where you make an initial request and the request times out. If you make the request again with the same request ID, the server can check if original operation with the same request ID was received, and if so, will ignore the second request. This prevents clients from accidentally creating duplicate commitments. The request ID must be a valid UUID with the exception that zero UUID is not supported ( 00000000-0000-0000-0000-000000000000).
x__xgafv: string, V1 error format.
Allowed values
1 - v1 error format
2 - v2 error format
Returns:
An object of the form:
{ # Represents an Operation resource. Google Compute Engine has three Operation resources: * [Global](/compute/docs/reference/rest/alpha/globalOperations) * [Regional](/compute/docs/reference/rest/alpha/regionOperations) * [Zonal](/compute/docs/reference/rest/alpha/zoneOperations) You can use an operation resource to manage asynchronous API requests. For more information, read Handling API responses. Operations can be global, regional or zonal. - For global operations, use the `globalOperations` resource. - For regional operations, use the `regionOperations` resource. - For zonal operations, use the `zoneOperations` resource. For more information, read Global, Regional, and Zonal Resources. Note that completed Operation resources have a limited retention period.
"clientOperationId": "A String", # [Output Only] The value of `requestId` if you provided it in the request. Not present otherwise.
"creationTimestamp": "A String", # [Deprecated] This field is deprecated.
"description": "A String", # [Output Only] A textual description of the operation, which is set when the operation is created.
"endTime": "A String", # [Output Only] The time that this operation was completed. This value is in RFC3339 text format.
"error": { # [Output Only] If errors are generated during processing of the operation, this field will be populated.
"errors": [ # [Output Only] The array of errors encountered while processing this operation.
{
"code": "A String", # [Output Only] The error type identifier for this error.
"errorDetails": [ # [Output Only] An optional list of messages that contain the error details. There is a set of defined message types to use for providing details.The syntax depends on the error code. For example, QuotaExceededInfo will have details when the error code is QUOTA_EXCEEDED.
{
"errorInfo": { # Describes the cause of the error with structured details. Example of an error when contacting the "pubsub.googleapis.com" API when it is not enabled: { "reason": "API_DISABLED" "domain": "googleapis.com" "metadata": { "resource": "projects/123", "service": "pubsub.googleapis.com" } } This response indicates that the pubsub.googleapis.com API is not enabled. Example of an error that is returned when attempting to create a Spanner instance in a region that is out of stock: { "reason": "STOCKOUT" "domain": "spanner.googleapis.com", "metadata": { "availableRegions": "us-central1,us-east2" } }
"domain": "A String", # The logical grouping to which the "reason" belongs. The error domain is typically the registered service name of the tool or product that generates the error. Example: "pubsub.googleapis.com". If the error is generated by some common infrastructure, the error domain must be a globally unique value that identifies the infrastructure. For Google API infrastructure, the error domain is "googleapis.com".
"metadatas": { # Additional structured details about this error. Keys must match /a-z+/ but should ideally be lowerCamelCase. Also they must be limited to 64 characters in length. When identifying the current value of an exceeded limit, the units should be contained in the key, not the value. For example, rather than {"instanceLimit": "100/request"}, should be returned as, {"instanceLimitPerRequest": "100"}, if the client exceeds the number of instances that can be created in a single (batch) request.
"a_key": "A String",
},
"reason": "A String", # The reason of the error. This is a constant value that identifies the proximate cause of the error. Error reasons are unique within a particular domain of errors. This should be at most 63 characters and match a regular expression of `A-Z+[A-Z0-9]`, which represents UPPER_SNAKE_CASE.
},
"help": { # Provides links to documentation or for performing an out of band action. For example, if a quota check failed with an error indicating the calling project hasn't enabled the accessed service, this can contain a URL pointing directly to the right place in the developer console to flip the bit.
"links": [ # URL(s) pointing to additional information on handling the current error.
{ # Describes a URL link.
"description": "A String", # Describes what the link offers.
"url": "A String", # The URL of the link.
},
],
},
"localizedMessage": { # Provides a localized error message that is safe to return to the user which can be attached to an RPC error.
"locale": "A String", # The locale used following the specification defined at https://www.rfc-editor.org/rfc/bcp/bcp47.txt. Examples are: "en-US", "fr-CH", "es-MX"
"message": "A String", # The localized error message in the above locale.
},
"quotaInfo": { # Additional details for quota exceeded error for resource quota.
"dimensions": { # The map holding related quota dimensions.
"a_key": "A String",
},
"futureLimit": 3.14, # Future quota limit being rolled out. The limit's unit depends on the quota type or metric.
"limit": 3.14, # Current effective quota limit. The limit's unit depends on the quota type or metric.
"limitName": "A String", # The name of the quota limit.
"metricName": "A String", # The Compute Engine quota metric name.
"rolloutStatus": "A String", # Rollout status of the future quota limit.
},
},
],
"location": "A String", # [Output Only] Indicates the field in the request that caused the error. This property is optional.
"message": "A String", # [Output Only] An optional, human-readable error message.
},
],
},
"httpErrorMessage": "A String", # [Output Only] If the operation fails, this field contains the HTTP error message that was returned, such as `NOT FOUND`.
"httpErrorStatusCode": 42, # [Output Only] If the operation fails, this field contains the HTTP error status code that was returned. For example, a `404` means the resource was not found.
"id": "A String", # [Output Only] The unique identifier for the operation. This identifier is defined by the server.
"insertTime": "A String", # [Output Only] The time that this operation was requested. This value is in RFC3339 text format.
"instancesBulkInsertOperationMetadata": {
"perLocationStatus": { # Status information per location (location name is key). Example key: zones/us-central1-a
"a_key": {
"createdVmCount": 42, # [Output Only] Count of VMs successfully created so far.
"deletedVmCount": 42, # [Output Only] Count of VMs that got deleted during rollback.
"failedToCreateVmCount": 42, # [Output Only] Count of VMs that started creating but encountered an error.
"status": "A String", # [Output Only] Creation status of BulkInsert operation - information if the flow is rolling forward or rolling back.
"targetVmCount": 42, # [Output Only] Count of VMs originally planned to be created.
},
},
},
"kind": "compute#operation", # [Output Only] Type of the resource. Always `compute#operation` for Operation resources.
"name": "A String", # [Output Only] Name of the operation.
"operationGroupId": "A String", # [Output Only] An ID that represents a group of operations, such as when a group of operations results from a `bulkInsert` API request.
"operationType": "A String", # [Output Only] The type of operation, such as `insert`, `update`, or `delete`, and so on.
"progress": 42, # [Output Only] An optional progress indicator that ranges from 0 to 100. There is no requirement that this be linear or support any granularity of operations. This should not be used to guess when the operation will be complete. This number should monotonically increase as the operation progresses.
"region": "A String", # [Output Only] The URL of the region where the operation resides. Only applicable when performing regional operations.
"selfLink": "A String", # [Output Only] Server-defined URL for the resource.
"selfLinkWithId": "A String", # [Output Only] Server-defined URL for this resource with the resource id.
"setCommonInstanceMetadataOperationMetadata": { # [Output Only] If the operation is for projects.setCommonInstanceMetadata, this field will contain information on all underlying zonal actions and their state.
"clientOperationId": "A String", # [Output Only] The client operation id.
"perLocationOperations": { # [Output Only] Status information per location (location name is key). Example key: zones/us-central1-a
"a_key": {
"error": { # The `Status` type defines a logical error model that is suitable for different programming environments, including REST APIs and RPC APIs. It is used by [gRPC](https://github.com/grpc). Each `Status` message contains three pieces of data: error code, error message, and error details. You can find out more about this error model and how to work with it in the [API Design Guide](https://cloud.google.com/apis/design/errors). # [Output Only] If state is `ABANDONED` or `FAILED`, this field is populated.
"code": 42, # The status code, which should be an enum value of google.rpc.Code.
"details": [ # A list of messages that carry the error details. There is a common set of message types for APIs to use.
{
"a_key": "", # Properties of the object. Contains field @type with type URL.
},
],
"message": "A String", # A developer-facing error message, which should be in English. Any user-facing error message should be localized and sent in the google.rpc.Status.details field, or localized by the client.
},
"state": "A String", # [Output Only] Status of the action, which can be one of the following: `PROPAGATING`, `PROPAGATED`, `ABANDONED`, `FAILED`, or `DONE`.
},
},
},
"startTime": "A String", # [Output Only] The time that this operation was started by the server. This value is in RFC3339 text format.
"status": "A String", # [Output Only] The status of the operation, which can be one of the following: `PENDING`, `RUNNING`, or `DONE`.
"statusMessage": "A String", # [Output Only] An optional textual description of the current status of the operation.
"targetId": "A String", # [Output Only] The unique target ID, which identifies a specific incarnation of the target resource.
"targetLink": "A String", # [Output Only] The URL of the resource that the operation modifies. For operations related to creating a snapshot, this points to the disk that the snapshot was created from.
"user": "A String", # [Output Only] User who requested the operation, for example: `user@example.com` or `alice_smith_identifier (global/workforcePools/example-com-us-employees)`.
"warnings": [ # [Output Only] If warning messages are generated during processing of the operation, this field will be populated.
{
"code": "A String", # [Output Only] A warning code, if applicable. For example, Compute Engine returns NO_RESULTS_ON_PAGE if there are no results in the response.
"data": [ # [Output Only] Metadata about this warning in key: value format. For example: "data": [ { "key": "scope", "value": "zones/us-east1-d" }
{
"key": "A String", # [Output Only] A key that provides more detail on the warning being returned. For example, for warnings where there are no results in a list request for a particular zone, this key might be scope and the key value might be the zone name. Other examples might be a key indicating a deprecated resource and a suggested replacement, or a warning about invalid network settings (for example, if an instance attempts to perform IP forwarding but is not enabled for IP forwarding).
"value": "A String", # [Output Only] A warning data value corresponding to the key.
},
],
"message": "A String", # [Output Only] A human-readable description of the warning code.
},
],
"zone": "A String", # [Output Only] The URL of the zone where the operation resides. Only applicable when performing per-zone operations.
}
close()
Close httplib2 connections.
delete(project, zone, instanceGroupManager, resizeRequest, requestId=None, x__xgafv=None)
Deletes the specified, inactive resize request. Requests that are still active cannot be deleted. Deleting request does not delete instances that were provisioned previously.
Args:
project: string, Project ID for this request. (required)
zone: string, The name of the zone where the managed instance group is located. The name should conform to RFC1035. (required)
instanceGroupManager: string, The name of the managed instance group. The name should conform to RFC1035 or be a resource ID. (required)
resizeRequest: string, The name of the resize request to delete. The name should conform to RFC1035 or be a resource ID. (required)
requestId: string, An optional request ID to identify requests. Specify a unique request ID so that if you must retry your request, the server will know to ignore the request if it has already been completed. For example, consider a situation where you make an initial request and the request times out. If you make the request again with the same request ID, the server can check if original operation with the same request ID was received, and if so, will ignore the second request. This prevents clients from accidentally creating duplicate commitments. The request ID must be a valid UUID with the exception that zero UUID is not supported ( 00000000-0000-0000-0000-000000000000).
x__xgafv: string, V1 error format.
Allowed values
1 - v1 error format
2 - v2 error format
Returns:
An object of the form:
{ # Represents an Operation resource. Google Compute Engine has three Operation resources: * [Global](/compute/docs/reference/rest/alpha/globalOperations) * [Regional](/compute/docs/reference/rest/alpha/regionOperations) * [Zonal](/compute/docs/reference/rest/alpha/zoneOperations) You can use an operation resource to manage asynchronous API requests. For more information, read Handling API responses. Operations can be global, regional or zonal. - For global operations, use the `globalOperations` resource. - For regional operations, use the `regionOperations` resource. - For zonal operations, use the `zoneOperations` resource. For more information, read Global, Regional, and Zonal Resources. Note that completed Operation resources have a limited retention period.
"clientOperationId": "A String", # [Output Only] The value of `requestId` if you provided it in the request. Not present otherwise.
"creationTimestamp": "A String", # [Deprecated] This field is deprecated.
"description": "A String", # [Output Only] A textual description of the operation, which is set when the operation is created.
"endTime": "A String", # [Output Only] The time that this operation was completed. This value is in RFC3339 text format.
"error": { # [Output Only] If errors are generated during processing of the operation, this field will be populated.
"errors": [ # [Output Only] The array of errors encountered while processing this operation.
{
"code": "A String", # [Output Only] The error type identifier for this error.
"errorDetails": [ # [Output Only] An optional list of messages that contain the error details. There is a set of defined message types to use for providing details.The syntax depends on the error code. For example, QuotaExceededInfo will have details when the error code is QUOTA_EXCEEDED.
{
"errorInfo": { # Describes the cause of the error with structured details. Example of an error when contacting the "pubsub.googleapis.com" API when it is not enabled: { "reason": "API_DISABLED" "domain": "googleapis.com" "metadata": { "resource": "projects/123", "service": "pubsub.googleapis.com" } } This response indicates that the pubsub.googleapis.com API is not enabled. Example of an error that is returned when attempting to create a Spanner instance in a region that is out of stock: { "reason": "STOCKOUT" "domain": "spanner.googleapis.com", "metadata": { "availableRegions": "us-central1,us-east2" } }
"domain": "A String", # The logical grouping to which the "reason" belongs. The error domain is typically the registered service name of the tool or product that generates the error. Example: "pubsub.googleapis.com". If the error is generated by some common infrastructure, the error domain must be a globally unique value that identifies the infrastructure. For Google API infrastructure, the error domain is "googleapis.com".
"metadatas": { # Additional structured details about this error. Keys must match /a-z+/ but should ideally be lowerCamelCase. Also they must be limited to 64 characters in length. When identifying the current value of an exceeded limit, the units should be contained in the key, not the value. For example, rather than {"instanceLimit": "100/request"}, should be returned as, {"instanceLimitPerRequest": "100"}, if the client exceeds the number of instances that can be created in a single (batch) request.
"a_key": "A String",
},
"reason": "A String", # The reason of the error. This is a constant value that identifies the proximate cause of the error. Error reasons are unique within a particular domain of errors. This should be at most 63 characters and match a regular expression of `A-Z+[A-Z0-9]`, which represents UPPER_SNAKE_CASE.
},
"help": { # Provides links to documentation or for performing an out of band action. For example, if a quota check failed with an error indicating the calling project hasn't enabled the accessed service, this can contain a URL pointing directly to the right place in the developer console to flip the bit.
"links": [ # URL(s) pointing to additional information on handling the current error.
{ # Describes a URL link.
"description": "A String", # Describes what the link offers.
"url": "A String", # The URL of the link.
},
],
},
"localizedMessage": { # Provides a localized error message that is safe to return to the user which can be attached to an RPC error.
"locale": "A String", # The locale used following the specification defined at https://www.rfc-editor.org/rfc/bcp/bcp47.txt. Examples are: "en-US", "fr-CH", "es-MX"
"message": "A String", # The localized error message in the above locale.
},
"quotaInfo": { # Additional details for quota exceeded error for resource quota.
"dimensions": { # The map holding related quota dimensions.
"a_key": "A String",
},
"futureLimit": 3.14, # Future quota limit being rolled out. The limit's unit depends on the quota type or metric.
"limit": 3.14, # Current effective quota limit. The limit's unit depends on the quota type or metric.
"limitName": "A String", # The name of the quota limit.
"metricName": "A String", # The Compute Engine quota metric name.
"rolloutStatus": "A String", # Rollout status of the future quota limit.
},
},
],
"location": "A String", # [Output Only] Indicates the field in the request that caused the error. This property is optional.
"message": "A String", # [Output Only] An optional, human-readable error message.
},
],
},
"httpErrorMessage": "A String", # [Output Only] If the operation fails, this field contains the HTTP error message that was returned, such as `NOT FOUND`.
"httpErrorStatusCode": 42, # [Output Only] If the operation fails, this field contains the HTTP error status code that was returned. For example, a `404` means the resource was not found.
"id": "A String", # [Output Only] The unique identifier for the operation. This identifier is defined by the server.
"insertTime": "A String", # [Output Only] The time that this operation was requested. This value is in RFC3339 text format.
"instancesBulkInsertOperationMetadata": {
"perLocationStatus": { # Status information per location (location name is key). Example key: zones/us-central1-a
"a_key": {
"createdVmCount": 42, # [Output Only] Count of VMs successfully created so far.
"deletedVmCount": 42, # [Output Only] Count of VMs that got deleted during rollback.
"failedToCreateVmCount": 42, # [Output Only] Count of VMs that started creating but encountered an error.
"status": "A String", # [Output Only] Creation status of BulkInsert operation - information if the flow is rolling forward or rolling back.
"targetVmCount": 42, # [Output Only] Count of VMs originally planned to be created.
},
},
},
"kind": "compute#operation", # [Output Only] Type of the resource. Always `compute#operation` for Operation resources.
"name": "A String", # [Output Only] Name of the operation.
"operationGroupId": "A String", # [Output Only] An ID that represents a group of operations, such as when a group of operations results from a `bulkInsert` API request.
"operationType": "A String", # [Output Only] The type of operation, such as `insert`, `update`, or `delete`, and so on.
"progress": 42, # [Output Only] An optional progress indicator that ranges from 0 to 100. There is no requirement that this be linear or support any granularity of operations. This should not be used to guess when the operation will be complete. This number should monotonically increase as the operation progresses.
"region": "A String", # [Output Only] The URL of the region where the operation resides. Only applicable when performing regional operations.
"selfLink": "A String", # [Output Only] Server-defined URL for the resource.
"selfLinkWithId": "A String", # [Output Only] Server-defined URL for this resource with the resource id.
"setCommonInstanceMetadataOperationMetadata": { # [Output Only] If the operation is for projects.setCommonInstanceMetadata, this field will contain information on all underlying zonal actions and their state.
"clientOperationId": "A String", # [Output Only] The client operation id.
"perLocationOperations": { # [Output Only] Status information per location (location name is key). Example key: zones/us-central1-a
"a_key": {
"error": { # The `Status` type defines a logical error model that is suitable for different programming environments, including REST APIs and RPC APIs. It is used by [gRPC](https://github.com/grpc). Each `Status` message contains three pieces of data: error code, error message, and error details. You can find out more about this error model and how to work with it in the [API Design Guide](https://cloud.google.com/apis/design/errors). # [Output Only] If state is `ABANDONED` or `FAILED`, this field is populated.
"code": 42, # The status code, which should be an enum value of google.rpc.Code.
"details": [ # A list of messages that carry the error details. There is a common set of message types for APIs to use.
{
"a_key": "", # Properties of the object. Contains field @type with type URL.
},
],
"message": "A String", # A developer-facing error message, which should be in English. Any user-facing error message should be localized and sent in the google.rpc.Status.details field, or localized by the client.
},
"state": "A String", # [Output Only] Status of the action, which can be one of the following: `PROPAGATING`, `PROPAGATED`, `ABANDONED`, `FAILED`, or `DONE`.
},
},
},
"startTime": "A String", # [Output Only] The time that this operation was started by the server. This value is in RFC3339 text format.
"status": "A String", # [Output Only] The status of the operation, which can be one of the following: `PENDING`, `RUNNING`, or `DONE`.
"statusMessage": "A String", # [Output Only] An optional textual description of the current status of the operation.
"targetId": "A String", # [Output Only] The unique target ID, which identifies a specific incarnation of the target resource.
"targetLink": "A String", # [Output Only] The URL of the resource that the operation modifies. For operations related to creating a snapshot, this points to the disk that the snapshot was created from.
"user": "A String", # [Output Only] User who requested the operation, for example: `user@example.com` or `alice_smith_identifier (global/workforcePools/example-com-us-employees)`.
"warnings": [ # [Output Only] If warning messages are generated during processing of the operation, this field will be populated.
{
"code": "A String", # [Output Only] A warning code, if applicable. For example, Compute Engine returns NO_RESULTS_ON_PAGE if there are no results in the response.
"data": [ # [Output Only] Metadata about this warning in key: value format. For example: "data": [ { "key": "scope", "value": "zones/us-east1-d" }
{
"key": "A String", # [Output Only] A key that provides more detail on the warning being returned. For example, for warnings where there are no results in a list request for a particular zone, this key might be scope and the key value might be the zone name. Other examples might be a key indicating a deprecated resource and a suggested replacement, or a warning about invalid network settings (for example, if an instance attempts to perform IP forwarding but is not enabled for IP forwarding).
"value": "A String", # [Output Only] A warning data value corresponding to the key.
},
],
"message": "A String", # [Output Only] A human-readable description of the warning code.
},
],
"zone": "A String", # [Output Only] The URL of the zone where the operation resides. Only applicable when performing per-zone operations.
}
get(project, zone, instanceGroupManager, resizeRequest, x__xgafv=None)
Returns all of the details about the specified resize request.
Args:
project: string, Project ID for this request. (required)
zone: string, Name of the href="/compute/docs/regions-zones/#available">zone scoping this request. Name should conform to RFC1035. (required)
instanceGroupManager: string, The name of the managed instance group. Name should conform to RFC1035 or be a resource ID. (required)
resizeRequest: string, The name of the resize request. Name should conform to RFC1035 or be a resource ID. (required)
x__xgafv: string, V1 error format.
Allowed values
1 - v1 error format
2 - v2 error format
Returns:
An object of the form:
{ # InstanceGroupManagerResizeRequest represents a request to create a number of VMs: either immediately or by queuing the request for the specified time. This resize request is nested under InstanceGroupManager and the VMs created by this request are added to the owning InstanceGroupManager.
"count": 42, # This field is deprecated, please use resize_by instead. The count of instances to create as part of this resize request.
"creationTimestamp": "A String", # [Output Only] The creation timestamp for this resize request in RFC3339 text format.
"description": "A String", # An optional description of this resource.
"id": "A String", # [Output Only] A unique identifier for this resource type. The server generates this identifier.
"instances": [ # The list of specifications of per-instance configs to be created. This field cannot be used together with 'resize_by'.
{
"fingerprint": "A String", # Fingerprint of this per-instance config. This field can be used in optimistic locking. It is ignored when inserting a per-instance config. An up-to-date fingerprint must be provided in order to update an existing per-instance configuration or the field needs to be unset.
"name": "A String", # The name of a per-instance configuration and its corresponding instance. Serves as a merge key during UpdatePerInstanceConfigs operations, that is, if a per-instance configuration with the same name exists then it will be updated, otherwise a new one will be created for the VM instance with the same name. An attempt to create a per-instance configuration for a VM instance that either doesn't exist or is not part of the group will result in an error.
"preservedState": { # Preserved state for a given instance. # The intended preserved state for the given instance. Does not contain preserved state generated from a stateful policy.
"disks": { # Preserved disks defined for this instance. This map is keyed with the device names of the disks.
"a_key": {
"autoDelete": "A String", # These stateful disks will never be deleted during autohealing, update, instance recreate operations. This flag is used to configure if the disk should be deleted after it is no longer used by the group, e.g. when the given instance or the whole MIG is deleted. Note: disks attached in READ_ONLY mode cannot be auto-deleted.
"mode": "A String", # The mode in which to attach this disk, either READ_WRITE or READ_ONLY. If not specified, the default is to attach the disk in READ_WRITE mode.
"source": "A String", # The URL of the disk resource that is stateful and should be attached to the VM instance.
},
},
"externalIPs": { # Preserved external IPs defined for this instance. This map is keyed with the name of the network interface.
"a_key": {
"autoDelete": "A String", # These stateful IPs will never be released during autohealing, update or VM instance recreate operations. This flag is used to configure if the IP reservation should be deleted after it is no longer used by the group, e.g. when the given instance or the whole group is deleted.
"ipAddress": { # Ip address representation
"address": "A String", # The URL of the reservation for this IP address.
"literal": "A String", # An IPv4 internal network address to assign to the instance for this network interface.
},
},
},
"internalIPs": { # Preserved internal IPs defined for this instance. This map is keyed with the name of the network interface.
"a_key": {
"autoDelete": "A String", # These stateful IPs will never be released during autohealing, update or VM instance recreate operations. This flag is used to configure if the IP reservation should be deleted after it is no longer used by the group, e.g. when the given instance or the whole group is deleted.
"ipAddress": { # Ip address representation
"address": "A String", # The URL of the reservation for this IP address.
"literal": "A String", # An IPv4 internal network address to assign to the instance for this network interface.
},
},
},
"metadata": { # Preserved metadata defined for this instance.
"a_key": "A String",
},
},
"status": "A String", # The status of applying this per-instance configuration on the corresponding managed instance.
},
],
"kind": "compute#instanceGroupManagerResizeRequest", # [Output Only] The resource type, which is always compute#instanceGroupManagerResizeRequest for resize requests.
"name": "A String", # The name of this resize request. The name must be 1-63 characters long, and comply with RFC1035.
"queuingPolicy": { # Queuing parameters for the requested deferred capacity. # This field is deprecated, ResizeRequests would not be provisioned immediately and would stay in the queue until explicitly cancelled. When set, defines queing parameters for the requested deferred capacity. When unset, the request starts provisioning immediately, or fails if immediate provisioning is not possible.
"validUntilDuration": { # A Duration represents a fixed-length span of time represented as a count of seconds and fractions of seconds at nanosecond resolution. It is independent of any calendar and concepts like "day" or "month". Range is approximately 10,000 years. # Relative deadline for waiting for capacity.
"nanos": 42, # Span of time that's a fraction of a second at nanosecond resolution. Durations less than one second are represented with a 0 `seconds` field and a positive `nanos` field. Must be from 0 to 999,999,999 inclusive.
"seconds": "A String", # Span of time at a resolution of a second. Must be from 0 to 315,576,000,000 inclusive. Note: these bounds are computed from: 60 sec/min * 60 min/hr * 24 hr/day * 365.25 days/year * 10000 years
},
"validUntilTime": "A String", # Absolute deadline for waiting for capacity in RFC3339 text format.
},
"region": "A String", # [Output Only] The URL of a region where the resize request is located. Populated only for regional resize requests.
"requestedRunDuration": { # A Duration represents a fixed-length span of time represented as a count of seconds and fractions of seconds at nanosecond resolution. It is independent of any calendar and concepts like "day" or "month". Range is approximately 10,000 years. # Requested run duration for instances that will be created by this request. At the end of the run duration instance will be deleted.
"nanos": 42, # Span of time that's a fraction of a second at nanosecond resolution. Durations less than one second are represented with a 0 `seconds` field and a positive `nanos` field. Must be from 0 to 999,999,999 inclusive.
"seconds": "A String", # Span of time at a resolution of a second. Must be from 0 to 315,576,000,000 inclusive. Note: these bounds are computed from: 60 sec/min * 60 min/hr * 24 hr/day * 365.25 days/year * 10000 years
},
"resizeBy": 42, # The number of instances to be created by this resize request. The group's target size will be increased by this number. This field cannot be used together with 'instances'.
"selfLink": "A String", # [Output Only] The URL for this resize request. The server defines this URL.
"selfLinkWithId": "A String", # [Output Only] Server-defined URL for this resource with the resource id.
"state": "A String", # [Output only] Current state of the request.
"status": { # [Output only] Status of the request.
"error": { # [Output only] Fatal errors encountered during the queueing or provisioning phases of the ResizeRequest that caused the transition to the FAILED state. Contrary to the last_attempt errors, this field is final and errors are never removed from here, as the ResizeRequest is not going to retry.
"errors": [ # [Output Only] The array of errors encountered while processing this operation.
{
"code": "A String", # [Output Only] The error type identifier for this error.
"errorDetails": [ # [Output Only] An optional list of messages that contain the error details. There is a set of defined message types to use for providing details.The syntax depends on the error code. For example, QuotaExceededInfo will have details when the error code is QUOTA_EXCEEDED.
{
"errorInfo": { # Describes the cause of the error with structured details. Example of an error when contacting the "pubsub.googleapis.com" API when it is not enabled: { "reason": "API_DISABLED" "domain": "googleapis.com" "metadata": { "resource": "projects/123", "service": "pubsub.googleapis.com" } } This response indicates that the pubsub.googleapis.com API is not enabled. Example of an error that is returned when attempting to create a Spanner instance in a region that is out of stock: { "reason": "STOCKOUT" "domain": "spanner.googleapis.com", "metadata": { "availableRegions": "us-central1,us-east2" } }
"domain": "A String", # The logical grouping to which the "reason" belongs. The error domain is typically the registered service name of the tool or product that generates the error. Example: "pubsub.googleapis.com". If the error is generated by some common infrastructure, the error domain must be a globally unique value that identifies the infrastructure. For Google API infrastructure, the error domain is "googleapis.com".
"metadatas": { # Additional structured details about this error. Keys must match /a-z+/ but should ideally be lowerCamelCase. Also they must be limited to 64 characters in length. When identifying the current value of an exceeded limit, the units should be contained in the key, not the value. For example, rather than {"instanceLimit": "100/request"}, should be returned as, {"instanceLimitPerRequest": "100"}, if the client exceeds the number of instances that can be created in a single (batch) request.
"a_key": "A String",
},
"reason": "A String", # The reason of the error. This is a constant value that identifies the proximate cause of the error. Error reasons are unique within a particular domain of errors. This should be at most 63 characters and match a regular expression of `A-Z+[A-Z0-9]`, which represents UPPER_SNAKE_CASE.
},
"help": { # Provides links to documentation or for performing an out of band action. For example, if a quota check failed with an error indicating the calling project hasn't enabled the accessed service, this can contain a URL pointing directly to the right place in the developer console to flip the bit.
"links": [ # URL(s) pointing to additional information on handling the current error.
{ # Describes a URL link.
"description": "A String", # Describes what the link offers.
"url": "A String", # The URL of the link.
},
],
},
"localizedMessage": { # Provides a localized error message that is safe to return to the user which can be attached to an RPC error.
"locale": "A String", # The locale used following the specification defined at https://www.rfc-editor.org/rfc/bcp/bcp47.txt. Examples are: "en-US", "fr-CH", "es-MX"
"message": "A String", # The localized error message in the above locale.
},
"quotaInfo": { # Additional details for quota exceeded error for resource quota.
"dimensions": { # The map holding related quota dimensions.
"a_key": "A String",
},
"futureLimit": 3.14, # Future quota limit being rolled out. The limit's unit depends on the quota type or metric.
"limit": 3.14, # Current effective quota limit. The limit's unit depends on the quota type or metric.
"limitName": "A String", # The name of the quota limit.
"metricName": "A String", # The Compute Engine quota metric name.
"rolloutStatus": "A String", # Rollout status of the future quota limit.
},
},
],
"location": "A String", # [Output Only] Indicates the field in the request that caused the error. This property is optional.
"message": "A String", # [Output Only] An optional, human-readable error message.
},
],
},
"lastAttempt": { # [Output only] Information about the last attempt to fulfill the request. The value is temporary since the ResizeRequest can retry, as long as it's still active and the last attempt value can either be cleared or replaced with a different error. Since ResizeRequest retries infrequently, the value may be stale and no longer show an active problem. The value is cleared when ResizeRequest transitions to the final state (becomes inactive). If the final state is FAILED the error describing it will be storred in the "error" field only.
"error": { # Errors that prevented the ResizeRequest to be fulfilled.
"errors": [ # [Output Only] The array of errors encountered while processing this operation.
{
"code": "A String", # [Output Only] The error type identifier for this error.
"errorDetails": [ # [Output Only] An optional list of messages that contain the error details. There is a set of defined message types to use for providing details.The syntax depends on the error code. For example, QuotaExceededInfo will have details when the error code is QUOTA_EXCEEDED.
{
"errorInfo": { # Describes the cause of the error with structured details. Example of an error when contacting the "pubsub.googleapis.com" API when it is not enabled: { "reason": "API_DISABLED" "domain": "googleapis.com" "metadata": { "resource": "projects/123", "service": "pubsub.googleapis.com" } } This response indicates that the pubsub.googleapis.com API is not enabled. Example of an error that is returned when attempting to create a Spanner instance in a region that is out of stock: { "reason": "STOCKOUT" "domain": "spanner.googleapis.com", "metadata": { "availableRegions": "us-central1,us-east2" } }
"domain": "A String", # The logical grouping to which the "reason" belongs. The error domain is typically the registered service name of the tool or product that generates the error. Example: "pubsub.googleapis.com". If the error is generated by some common infrastructure, the error domain must be a globally unique value that identifies the infrastructure. For Google API infrastructure, the error domain is "googleapis.com".
"metadatas": { # Additional structured details about this error. Keys must match /a-z+/ but should ideally be lowerCamelCase. Also they must be limited to 64 characters in length. When identifying the current value of an exceeded limit, the units should be contained in the key, not the value. For example, rather than {"instanceLimit": "100/request"}, should be returned as, {"instanceLimitPerRequest": "100"}, if the client exceeds the number of instances that can be created in a single (batch) request.
"a_key": "A String",
},
"reason": "A String", # The reason of the error. This is a constant value that identifies the proximate cause of the error. Error reasons are unique within a particular domain of errors. This should be at most 63 characters and match a regular expression of `A-Z+[A-Z0-9]`, which represents UPPER_SNAKE_CASE.
},
"help": { # Provides links to documentation or for performing an out of band action. For example, if a quota check failed with an error indicating the calling project hasn't enabled the accessed service, this can contain a URL pointing directly to the right place in the developer console to flip the bit.
"links": [ # URL(s) pointing to additional information on handling the current error.
{ # Describes a URL link.
"description": "A String", # Describes what the link offers.
"url": "A String", # The URL of the link.
},
],
},
"localizedMessage": { # Provides a localized error message that is safe to return to the user which can be attached to an RPC error.
"locale": "A String", # The locale used following the specification defined at https://www.rfc-editor.org/rfc/bcp/bcp47.txt. Examples are: "en-US", "fr-CH", "es-MX"
"message": "A String", # The localized error message in the above locale.
},
"quotaInfo": { # Additional details for quota exceeded error for resource quota.
"dimensions": { # The map holding related quota dimensions.
"a_key": "A String",
},
"futureLimit": 3.14, # Future quota limit being rolled out. The limit's unit depends on the quota type or metric.
"limit": 3.14, # Current effective quota limit. The limit's unit depends on the quota type or metric.
"limitName": "A String", # The name of the quota limit.
"metricName": "A String", # The Compute Engine quota metric name.
"rolloutStatus": "A String", # Rollout status of the future quota limit.
},
},
],
"location": "A String", # [Output Only] Indicates the field in the request that caused the error. This property is optional.
"message": "A String", # [Output Only] An optional, human-readable error message.
},
],
},
},
"queuingPolicy": { # Queuing parameters for the requested deferred capacity. # This field is deprecated, setting queueing policy is no longer supported. Constraints for the time when the instances start provisioning. Always exposed as absolute time.
"validUntilDuration": { # A Duration represents a fixed-length span of time represented as a count of seconds and fractions of seconds at nanosecond resolution. It is independent of any calendar and concepts like "day" or "month". Range is approximately 10,000 years. # Relative deadline for waiting for capacity.
"nanos": 42, # Span of time that's a fraction of a second at nanosecond resolution. Durations less than one second are represented with a 0 `seconds` field and a positive `nanos` field. Must be from 0 to 999,999,999 inclusive.
"seconds": "A String", # Span of time at a resolution of a second. Must be from 0 to 315,576,000,000 inclusive. Note: these bounds are computed from: 60 sec/min * 60 min/hr * 24 hr/day * 365.25 days/year * 10000 years
},
"validUntilTime": "A String", # Absolute deadline for waiting for capacity in RFC3339 text format.
},
},
"zone": "A String", # [Output Only] The URL of a zone where the resize request is located. Populated only for zonal resize requests.
}
insert(project, zone, instanceGroupManager, body=None, requestId=None, x__xgafv=None)
Creates a new resize request that starts provisioning VMs immediately or queues VM creation.
Args:
project: string, Project ID for this request. (required)
zone: string, The name of the zone where the managed instance group is located and where the resize request will be created. Name should conform to RFC1035. (required)
instanceGroupManager: string, The name of the managed instance group to which the resize request will be added. Name should conform to RFC1035 or be a resource ID. (required)
body: object, The request body.
The object takes the form of:
{ # InstanceGroupManagerResizeRequest represents a request to create a number of VMs: either immediately or by queuing the request for the specified time. This resize request is nested under InstanceGroupManager and the VMs created by this request are added to the owning InstanceGroupManager.
"count": 42, # This field is deprecated, please use resize_by instead. The count of instances to create as part of this resize request.
"creationTimestamp": "A String", # [Output Only] The creation timestamp for this resize request in RFC3339 text format.
"description": "A String", # An optional description of this resource.
"id": "A String", # [Output Only] A unique identifier for this resource type. The server generates this identifier.
"instances": [ # The list of specifications of per-instance configs to be created. This field cannot be used together with 'resize_by'.
{
"fingerprint": "A String", # Fingerprint of this per-instance config. This field can be used in optimistic locking. It is ignored when inserting a per-instance config. An up-to-date fingerprint must be provided in order to update an existing per-instance configuration or the field needs to be unset.
"name": "A String", # The name of a per-instance configuration and its corresponding instance. Serves as a merge key during UpdatePerInstanceConfigs operations, that is, if a per-instance configuration with the same name exists then it will be updated, otherwise a new one will be created for the VM instance with the same name. An attempt to create a per-instance configuration for a VM instance that either doesn't exist or is not part of the group will result in an error.
"preservedState": { # Preserved state for a given instance. # The intended preserved state for the given instance. Does not contain preserved state generated from a stateful policy.
"disks": { # Preserved disks defined for this instance. This map is keyed with the device names of the disks.
"a_key": {
"autoDelete": "A String", # These stateful disks will never be deleted during autohealing, update, instance recreate operations. This flag is used to configure if the disk should be deleted after it is no longer used by the group, e.g. when the given instance or the whole MIG is deleted. Note: disks attached in READ_ONLY mode cannot be auto-deleted.
"mode": "A String", # The mode in which to attach this disk, either READ_WRITE or READ_ONLY. If not specified, the default is to attach the disk in READ_WRITE mode.
"source": "A String", # The URL of the disk resource that is stateful and should be attached to the VM instance.
},
},
"externalIPs": { # Preserved external IPs defined for this instance. This map is keyed with the name of the network interface.
"a_key": {
"autoDelete": "A String", # These stateful IPs will never be released during autohealing, update or VM instance recreate operations. This flag is used to configure if the IP reservation should be deleted after it is no longer used by the group, e.g. when the given instance or the whole group is deleted.
"ipAddress": { # Ip address representation
"address": "A String", # The URL of the reservation for this IP address.
"literal": "A String", # An IPv4 internal network address to assign to the instance for this network interface.
},
},
},
"internalIPs": { # Preserved internal IPs defined for this instance. This map is keyed with the name of the network interface.
"a_key": {
"autoDelete": "A String", # These stateful IPs will never be released during autohealing, update or VM instance recreate operations. This flag is used to configure if the IP reservation should be deleted after it is no longer used by the group, e.g. when the given instance or the whole group is deleted.
"ipAddress": { # Ip address representation
"address": "A String", # The URL of the reservation for this IP address.
"literal": "A String", # An IPv4 internal network address to assign to the instance for this network interface.
},
},
},
"metadata": { # Preserved metadata defined for this instance.
"a_key": "A String",
},
},
"status": "A String", # The status of applying this per-instance configuration on the corresponding managed instance.
},
],
"kind": "compute#instanceGroupManagerResizeRequest", # [Output Only] The resource type, which is always compute#instanceGroupManagerResizeRequest for resize requests.
"name": "A String", # The name of this resize request. The name must be 1-63 characters long, and comply with RFC1035.
"queuingPolicy": { # Queuing parameters for the requested deferred capacity. # This field is deprecated, ResizeRequests would not be provisioned immediately and would stay in the queue until explicitly cancelled. When set, defines queing parameters for the requested deferred capacity. When unset, the request starts provisioning immediately, or fails if immediate provisioning is not possible.
"validUntilDuration": { # A Duration represents a fixed-length span of time represented as a count of seconds and fractions of seconds at nanosecond resolution. It is independent of any calendar and concepts like "day" or "month". Range is approximately 10,000 years. # Relative deadline for waiting for capacity.
"nanos": 42, # Span of time that's a fraction of a second at nanosecond resolution. Durations less than one second are represented with a 0 `seconds` field and a positive `nanos` field. Must be from 0 to 999,999,999 inclusive.
"seconds": "A String", # Span of time at a resolution of a second. Must be from 0 to 315,576,000,000 inclusive. Note: these bounds are computed from: 60 sec/min * 60 min/hr * 24 hr/day * 365.25 days/year * 10000 years
},
"validUntilTime": "A String", # Absolute deadline for waiting for capacity in RFC3339 text format.
},
"region": "A String", # [Output Only] The URL of a region where the resize request is located. Populated only for regional resize requests.
"requestedRunDuration": { # A Duration represents a fixed-length span of time represented as a count of seconds and fractions of seconds at nanosecond resolution. It is independent of any calendar and concepts like "day" or "month". Range is approximately 10,000 years. # Requested run duration for instances that will be created by this request. At the end of the run duration instance will be deleted.
"nanos": 42, # Span of time that's a fraction of a second at nanosecond resolution. Durations less than one second are represented with a 0 `seconds` field and a positive `nanos` field. Must be from 0 to 999,999,999 inclusive.
"seconds": "A String", # Span of time at a resolution of a second. Must be from 0 to 315,576,000,000 inclusive. Note: these bounds are computed from: 60 sec/min * 60 min/hr * 24 hr/day * 365.25 days/year * 10000 years
},
"resizeBy": 42, # The number of instances to be created by this resize request. The group's target size will be increased by this number. This field cannot be used together with 'instances'.
"selfLink": "A String", # [Output Only] The URL for this resize request. The server defines this URL.
"selfLinkWithId": "A String", # [Output Only] Server-defined URL for this resource with the resource id.
"state": "A String", # [Output only] Current state of the request.
"status": { # [Output only] Status of the request.
"error": { # [Output only] Fatal errors encountered during the queueing or provisioning phases of the ResizeRequest that caused the transition to the FAILED state. Contrary to the last_attempt errors, this field is final and errors are never removed from here, as the ResizeRequest is not going to retry.
"errors": [ # [Output Only] The array of errors encountered while processing this operation.
{
"code": "A String", # [Output Only] The error type identifier for this error.
"errorDetails": [ # [Output Only] An optional list of messages that contain the error details. There is a set of defined message types to use for providing details.The syntax depends on the error code. For example, QuotaExceededInfo will have details when the error code is QUOTA_EXCEEDED.
{
"errorInfo": { # Describes the cause of the error with structured details. Example of an error when contacting the "pubsub.googleapis.com" API when it is not enabled: { "reason": "API_DISABLED" "domain": "googleapis.com" "metadata": { "resource": "projects/123", "service": "pubsub.googleapis.com" } } This response indicates that the pubsub.googleapis.com API is not enabled. Example of an error that is returned when attempting to create a Spanner instance in a region that is out of stock: { "reason": "STOCKOUT" "domain": "spanner.googleapis.com", "metadata": { "availableRegions": "us-central1,us-east2" } }
"domain": "A String", # The logical grouping to which the "reason" belongs. The error domain is typically the registered service name of the tool or product that generates the error. Example: "pubsub.googleapis.com". If the error is generated by some common infrastructure, the error domain must be a globally unique value that identifies the infrastructure. For Google API infrastructure, the error domain is "googleapis.com".
"metadatas": { # Additional structured details about this error. Keys must match /a-z+/ but should ideally be lowerCamelCase. Also they must be limited to 64 characters in length. When identifying the current value of an exceeded limit, the units should be contained in the key, not the value. For example, rather than {"instanceLimit": "100/request"}, should be returned as, {"instanceLimitPerRequest": "100"}, if the client exceeds the number of instances that can be created in a single (batch) request.
"a_key": "A String",
},
"reason": "A String", # The reason of the error. This is a constant value that identifies the proximate cause of the error. Error reasons are unique within a particular domain of errors. This should be at most 63 characters and match a regular expression of `A-Z+[A-Z0-9]`, which represents UPPER_SNAKE_CASE.
},
"help": { # Provides links to documentation or for performing an out of band action. For example, if a quota check failed with an error indicating the calling project hasn't enabled the accessed service, this can contain a URL pointing directly to the right place in the developer console to flip the bit.
"links": [ # URL(s) pointing to additional information on handling the current error.
{ # Describes a URL link.
"description": "A String", # Describes what the link offers.
"url": "A String", # The URL of the link.
},
],
},
"localizedMessage": { # Provides a localized error message that is safe to return to the user which can be attached to an RPC error.
"locale": "A String", # The locale used following the specification defined at https://www.rfc-editor.org/rfc/bcp/bcp47.txt. Examples are: "en-US", "fr-CH", "es-MX"
"message": "A String", # The localized error message in the above locale.
},
"quotaInfo": { # Additional details for quota exceeded error for resource quota.
"dimensions": { # The map holding related quota dimensions.
"a_key": "A String",
},
"futureLimit": 3.14, # Future quota limit being rolled out. The limit's unit depends on the quota type or metric.
"limit": 3.14, # Current effective quota limit. The limit's unit depends on the quota type or metric.
"limitName": "A String", # The name of the quota limit.
"metricName": "A String", # The Compute Engine quota metric name.
"rolloutStatus": "A String", # Rollout status of the future quota limit.
},
},
],
"location": "A String", # [Output Only] Indicates the field in the request that caused the error. This property is optional.
"message": "A String", # [Output Only] An optional, human-readable error message.
},
],
},
"lastAttempt": { # [Output only] Information about the last attempt to fulfill the request. The value is temporary since the ResizeRequest can retry, as long as it's still active and the last attempt value can either be cleared or replaced with a different error. Since ResizeRequest retries infrequently, the value may be stale and no longer show an active problem. The value is cleared when ResizeRequest transitions to the final state (becomes inactive). If the final state is FAILED the error describing it will be storred in the "error" field only.
"error": { # Errors that prevented the ResizeRequest to be fulfilled.
"errors": [ # [Output Only] The array of errors encountered while processing this operation.
{
"code": "A String", # [Output Only] The error type identifier for this error.
"errorDetails": [ # [Output Only] An optional list of messages that contain the error details. There is a set of defined message types to use for providing details.The syntax depends on the error code. For example, QuotaExceededInfo will have details when the error code is QUOTA_EXCEEDED.
{
"errorInfo": { # Describes the cause of the error with structured details. Example of an error when contacting the "pubsub.googleapis.com" API when it is not enabled: { "reason": "API_DISABLED" "domain": "googleapis.com" "metadata": { "resource": "projects/123", "service": "pubsub.googleapis.com" } } This response indicates that the pubsub.googleapis.com API is not enabled. Example of an error that is returned when attempting to create a Spanner instance in a region that is out of stock: { "reason": "STOCKOUT" "domain": "spanner.googleapis.com", "metadata": { "availableRegions": "us-central1,us-east2" } }
"domain": "A String", # The logical grouping to which the "reason" belongs. The error domain is typically the registered service name of the tool or product that generates the error. Example: "pubsub.googleapis.com". If the error is generated by some common infrastructure, the error domain must be a globally unique value that identifies the infrastructure. For Google API infrastructure, the error domain is "googleapis.com".
"metadatas": { # Additional structured details about this error. Keys must match /a-z+/ but should ideally be lowerCamelCase. Also they must be limited to 64 characters in length. When identifying the current value of an exceeded limit, the units should be contained in the key, not the value. For example, rather than {"instanceLimit": "100/request"}, should be returned as, {"instanceLimitPerRequest": "100"}, if the client exceeds the number of instances that can be created in a single (batch) request.
"a_key": "A String",
},
"reason": "A String", # The reason of the error. This is a constant value that identifies the proximate cause of the error. Error reasons are unique within a particular domain of errors. This should be at most 63 characters and match a regular expression of `A-Z+[A-Z0-9]`, which represents UPPER_SNAKE_CASE.
},
"help": { # Provides links to documentation or for performing an out of band action. For example, if a quota check failed with an error indicating the calling project hasn't enabled the accessed service, this can contain a URL pointing directly to the right place in the developer console to flip the bit.
"links": [ # URL(s) pointing to additional information on handling the current error.
{ # Describes a URL link.
"description": "A String", # Describes what the link offers.
"url": "A String", # The URL of the link.
},
],
},
"localizedMessage": { # Provides a localized error message that is safe to return to the user which can be attached to an RPC error.
"locale": "A String", # The locale used following the specification defined at https://www.rfc-editor.org/rfc/bcp/bcp47.txt. Examples are: "en-US", "fr-CH", "es-MX"
"message": "A String", # The localized error message in the above locale.
},
"quotaInfo": { # Additional details for quota exceeded error for resource quota.
"dimensions": { # The map holding related quota dimensions.
"a_key": "A String",
},
"futureLimit": 3.14, # Future quota limit being rolled out. The limit's unit depends on the quota type or metric.
"limit": 3.14, # Current effective quota limit. The limit's unit depends on the quota type or metric.
"limitName": "A String", # The name of the quota limit.
"metricName": "A String", # The Compute Engine quota metric name.
"rolloutStatus": "A String", # Rollout status of the future quota limit.
},
},
],
"location": "A String", # [Output Only] Indicates the field in the request that caused the error. This property is optional.
"message": "A String", # [Output Only] An optional, human-readable error message.
},
],
},
},
"queuingPolicy": { # Queuing parameters for the requested deferred capacity. # This field is deprecated, setting queueing policy is no longer supported. Constraints for the time when the instances start provisioning. Always exposed as absolute time.
"validUntilDuration": { # A Duration represents a fixed-length span of time represented as a count of seconds and fractions of seconds at nanosecond resolution. It is independent of any calendar and concepts like "day" or "month". Range is approximately 10,000 years. # Relative deadline for waiting for capacity.
"nanos": 42, # Span of time that's a fraction of a second at nanosecond resolution. Durations less than one second are represented with a 0 `seconds` field and a positive `nanos` field. Must be from 0 to 999,999,999 inclusive.
"seconds": "A String", # Span of time at a resolution of a second. Must be from 0 to 315,576,000,000 inclusive. Note: these bounds are computed from: 60 sec/min * 60 min/hr * 24 hr/day * 365.25 days/year * 10000 years
},
"validUntilTime": "A String", # Absolute deadline for waiting for capacity in RFC3339 text format.
},
},
"zone": "A String", # [Output Only] The URL of a zone where the resize request is located. Populated only for zonal resize requests.
}
requestId: string, An optional request ID to identify requests. Specify a unique request ID so that if you must retry your request, the server will know to ignore the request if it has already been completed. For example, consider a situation where you make an initial request and the request times out. If you make the request again with the same request ID, the server can check if original operation with the same request ID was received, and if so, will ignore the second request. This prevents clients from accidentally creating duplicate commitments. The request ID must be a valid UUID with the exception that zero UUID is not supported ( 00000000-0000-0000-0000-000000000000).
x__xgafv: string, V1 error format.
Allowed values
1 - v1 error format
2 - v2 error format
Returns:
An object of the form:
{ # Represents an Operation resource. Google Compute Engine has three Operation resources: * [Global](/compute/docs/reference/rest/alpha/globalOperations) * [Regional](/compute/docs/reference/rest/alpha/regionOperations) * [Zonal](/compute/docs/reference/rest/alpha/zoneOperations) You can use an operation resource to manage asynchronous API requests. For more information, read Handling API responses. Operations can be global, regional or zonal. - For global operations, use the `globalOperations` resource. - For regional operations, use the `regionOperations` resource. - For zonal operations, use the `zoneOperations` resource. For more information, read Global, Regional, and Zonal Resources. Note that completed Operation resources have a limited retention period.
"clientOperationId": "A String", # [Output Only] The value of `requestId` if you provided it in the request. Not present otherwise.
"creationTimestamp": "A String", # [Deprecated] This field is deprecated.
"description": "A String", # [Output Only] A textual description of the operation, which is set when the operation is created.
"endTime": "A String", # [Output Only] The time that this operation was completed. This value is in RFC3339 text format.
"error": { # [Output Only] If errors are generated during processing of the operation, this field will be populated.
"errors": [ # [Output Only] The array of errors encountered while processing this operation.
{
"code": "A String", # [Output Only] The error type identifier for this error.
"errorDetails": [ # [Output Only] An optional list of messages that contain the error details. There is a set of defined message types to use for providing details.The syntax depends on the error code. For example, QuotaExceededInfo will have details when the error code is QUOTA_EXCEEDED.
{
"errorInfo": { # Describes the cause of the error with structured details. Example of an error when contacting the "pubsub.googleapis.com" API when it is not enabled: { "reason": "API_DISABLED" "domain": "googleapis.com" "metadata": { "resource": "projects/123", "service": "pubsub.googleapis.com" } } This response indicates that the pubsub.googleapis.com API is not enabled. Example of an error that is returned when attempting to create a Spanner instance in a region that is out of stock: { "reason": "STOCKOUT" "domain": "spanner.googleapis.com", "metadata": { "availableRegions": "us-central1,us-east2" } }
"domain": "A String", # The logical grouping to which the "reason" belongs. The error domain is typically the registered service name of the tool or product that generates the error. Example: "pubsub.googleapis.com". If the error is generated by some common infrastructure, the error domain must be a globally unique value that identifies the infrastructure. For Google API infrastructure, the error domain is "googleapis.com".
"metadatas": { # Additional structured details about this error. Keys must match /a-z+/ but should ideally be lowerCamelCase. Also they must be limited to 64 characters in length. When identifying the current value of an exceeded limit, the units should be contained in the key, not the value. For example, rather than {"instanceLimit": "100/request"}, should be returned as, {"instanceLimitPerRequest": "100"}, if the client exceeds the number of instances that can be created in a single (batch) request.
"a_key": "A String",
},
"reason": "A String", # The reason of the error. This is a constant value that identifies the proximate cause of the error. Error reasons are unique within a particular domain of errors. This should be at most 63 characters and match a regular expression of `A-Z+[A-Z0-9]`, which represents UPPER_SNAKE_CASE.
},
"help": { # Provides links to documentation or for performing an out of band action. For example, if a quota check failed with an error indicating the calling project hasn't enabled the accessed service, this can contain a URL pointing directly to the right place in the developer console to flip the bit.
"links": [ # URL(s) pointing to additional information on handling the current error.
{ # Describes a URL link.
"description": "A String", # Describes what the link offers.
"url": "A String", # The URL of the link.
},
],
},
"localizedMessage": { # Provides a localized error message that is safe to return to the user which can be attached to an RPC error.
"locale": "A String", # The locale used following the specification defined at https://www.rfc-editor.org/rfc/bcp/bcp47.txt. Examples are: "en-US", "fr-CH", "es-MX"
"message": "A String", # The localized error message in the above locale.
},
"quotaInfo": { # Additional details for quota exceeded error for resource quota.
"dimensions": { # The map holding related quota dimensions.
"a_key": "A String",
},
"futureLimit": 3.14, # Future quota limit being rolled out. The limit's unit depends on the quota type or metric.
"limit": 3.14, # Current effective quota limit. The limit's unit depends on the quota type or metric.
"limitName": "A String", # The name of the quota limit.
"metricName": "A String", # The Compute Engine quota metric name.
"rolloutStatus": "A String", # Rollout status of the future quota limit.
},
},
],
"location": "A String", # [Output Only] Indicates the field in the request that caused the error. This property is optional.
"message": "A String", # [Output Only] An optional, human-readable error message.
},
],
},
"httpErrorMessage": "A String", # [Output Only] If the operation fails, this field contains the HTTP error message that was returned, such as `NOT FOUND`.
"httpErrorStatusCode": 42, # [Output Only] If the operation fails, this field contains the HTTP error status code that was returned. For example, a `404` means the resource was not found.
"id": "A String", # [Output Only] The unique identifier for the operation. This identifier is defined by the server.
"insertTime": "A String", # [Output Only] The time that this operation was requested. This value is in RFC3339 text format.
"instancesBulkInsertOperationMetadata": {
"perLocationStatus": { # Status information per location (location name is key). Example key: zones/us-central1-a
"a_key": {
"createdVmCount": 42, # [Output Only] Count of VMs successfully created so far.
"deletedVmCount": 42, # [Output Only] Count of VMs that got deleted during rollback.
"failedToCreateVmCount": 42, # [Output Only] Count of VMs that started creating but encountered an error.
"status": "A String", # [Output Only] Creation status of BulkInsert operation - information if the flow is rolling forward or rolling back.
"targetVmCount": 42, # [Output Only] Count of VMs originally planned to be created.
},
},
},
"kind": "compute#operation", # [Output Only] Type of the resource. Always `compute#operation` for Operation resources.
"name": "A String", # [Output Only] Name of the operation.
"operationGroupId": "A String", # [Output Only] An ID that represents a group of operations, such as when a group of operations results from a `bulkInsert` API request.
"operationType": "A String", # [Output Only] The type of operation, such as `insert`, `update`, or `delete`, and so on.
"progress": 42, # [Output Only] An optional progress indicator that ranges from 0 to 100. There is no requirement that this be linear or support any granularity of operations. This should not be used to guess when the operation will be complete. This number should monotonically increase as the operation progresses.
"region": "A String", # [Output Only] The URL of the region where the operation resides. Only applicable when performing regional operations.
"selfLink": "A String", # [Output Only] Server-defined URL for the resource.
"selfLinkWithId": "A String", # [Output Only] Server-defined URL for this resource with the resource id.
"setCommonInstanceMetadataOperationMetadata": { # [Output Only] If the operation is for projects.setCommonInstanceMetadata, this field will contain information on all underlying zonal actions and their state.
"clientOperationId": "A String", # [Output Only] The client operation id.
"perLocationOperations": { # [Output Only] Status information per location (location name is key). Example key: zones/us-central1-a
"a_key": {
"error": { # The `Status` type defines a logical error model that is suitable for different programming environments, including REST APIs and RPC APIs. It is used by [gRPC](https://github.com/grpc). Each `Status` message contains three pieces of data: error code, error message, and error details. You can find out more about this error model and how to work with it in the [API Design Guide](https://cloud.google.com/apis/design/errors). # [Output Only] If state is `ABANDONED` or `FAILED`, this field is populated.
"code": 42, # The status code, which should be an enum value of google.rpc.Code.
"details": [ # A list of messages that carry the error details. There is a common set of message types for APIs to use.
{
"a_key": "", # Properties of the object. Contains field @type with type URL.
},
],
"message": "A String", # A developer-facing error message, which should be in English. Any user-facing error message should be localized and sent in the google.rpc.Status.details field, or localized by the client.
},
"state": "A String", # [Output Only] Status of the action, which can be one of the following: `PROPAGATING`, `PROPAGATED`, `ABANDONED`, `FAILED`, or `DONE`.
},
},
},
"startTime": "A String", # [Output Only] The time that this operation was started by the server. This value is in RFC3339 text format.
"status": "A String", # [Output Only] The status of the operation, which can be one of the following: `PENDING`, `RUNNING`, or `DONE`.
"statusMessage": "A String", # [Output Only] An optional textual description of the current status of the operation.
"targetId": "A String", # [Output Only] The unique target ID, which identifies a specific incarnation of the target resource.
"targetLink": "A String", # [Output Only] The URL of the resource that the operation modifies. For operations related to creating a snapshot, this points to the disk that the snapshot was created from.
"user": "A String", # [Output Only] User who requested the operation, for example: `user@example.com` or `alice_smith_identifier (global/workforcePools/example-com-us-employees)`.
"warnings": [ # [Output Only] If warning messages are generated during processing of the operation, this field will be populated.
{
"code": "A String", # [Output Only] A warning code, if applicable. For example, Compute Engine returns NO_RESULTS_ON_PAGE if there are no results in the response.
"data": [ # [Output Only] Metadata about this warning in key: value format. For example: "data": [ { "key": "scope", "value": "zones/us-east1-d" }
{
"key": "A String", # [Output Only] A key that provides more detail on the warning being returned. For example, for warnings where there are no results in a list request for a particular zone, this key might be scope and the key value might be the zone name. Other examples might be a key indicating a deprecated resource and a suggested replacement, or a warning about invalid network settings (for example, if an instance attempts to perform IP forwarding but is not enabled for IP forwarding).
"value": "A String", # [Output Only] A warning data value corresponding to the key.
},
],
"message": "A String", # [Output Only] A human-readable description of the warning code.
},
],
"zone": "A String", # [Output Only] The URL of the zone where the operation resides. Only applicable when performing per-zone operations.
}
list(project, zone, instanceGroupManager, filter=None, maxResults=None, orderBy=None, pageToken=None, returnPartialSuccess=None, x__xgafv=None)
Retrieves a list of resize requests that are contained in the managed instance group.
Args:
project: string, Project ID for this request. (required)
zone: string, The name of the zone where the managed instance group is located. The name should conform to RFC1035. (required)
instanceGroupManager: string, The name of the managed instance group. The name should conform to RFC1035. (required)
filter: string, A filter expression that filters resources listed in the response. Most Compute resources support two types of filter expressions: expressions that support regular expressions and expressions that follow API improvement proposal AIP-160. These two types of filter expressions cannot be mixed in one request. If you want to use AIP-160, your expression must specify the field name, an operator, and the value that you want to use for filtering. The value must be a string, a number, or a boolean. The operator must be either `=`, `!=`, `>`, `<`, `<=`, `>=` or `:`. For example, if you are filtering Compute Engine instances, you can exclude instances named `example-instance` by specifying `name != example-instance`. The `:*` comparison can be used to test whether a key has been defined. For example, to find all objects with `owner` label use: ``` labels.owner:* ``` You can also filter nested fields. For example, you could specify `scheduling.automaticRestart = false` to include instances only if they are not scheduled for automatic restarts. You can use filtering on nested fields to filter based on resource labels. To filter on multiple expressions, provide each separate expression within parentheses. For example: ``` (scheduling.automaticRestart = true) (cpuPlatform = "Intel Skylake") ``` By default, each expression is an `AND` expression. However, you can include `AND` and `OR` expressions explicitly. For example: ``` (cpuPlatform = "Intel Skylake") OR (cpuPlatform = "Intel Broadwell") AND (scheduling.automaticRestart = true) ``` If you want to use a regular expression, use the `eq` (equal) or `ne` (not equal) operator against a single un-parenthesized expression with or without quotes or against multiple parenthesized expressions. Examples: `fieldname eq unquoted literal` `fieldname eq 'single quoted literal'` `fieldname eq "double quoted literal"` `(fieldname1 eq literal) (fieldname2 ne "literal")` The literal value is interpreted as a regular expression using Google RE2 library syntax. The literal value must match the entire field. For example, to filter for instances that do not end with name "instance", you would use `name ne .*instance`. You cannot combine constraints on multiple fields using regular expressions.
maxResults: integer, The maximum number of results per page that should be returned. If the number of available results is larger than `maxResults`, Compute Engine returns a `nextPageToken` that can be used to get the next page of results in subsequent list requests. Acceptable values are `0` to `500`, inclusive. (Default: `500`)
orderBy: string, Sorts list results by a certain order. By default, results are returned in alphanumerical order based on the resource name. You can also sort results in descending order based on the creation timestamp using `orderBy="creationTimestamp desc"`. This sorts results based on the `creationTimestamp` field in reverse chronological order (newest result first). Use this to sort resources like operations so that the newest operation is returned first. Currently, only sorting by `name` or `creationTimestamp desc` is supported.
pageToken: string, Specifies a page token to use. Set `pageToken` to the `nextPageToken` returned by a previous list request to get the next page of results.
returnPartialSuccess: boolean, Opt-in for partial success behavior which provides partial results in case of failure. The default value is false. For example, when partial success behavior is enabled, aggregatedList for a single zone scope either returns all resources in the zone or no resources, with an error code.
x__xgafv: string, V1 error format.
Allowed values
1 - v1 error format
2 - v2 error format
Returns:
An object of the form:
{ # [Output Only] A list of resize requests.
"id": "A String", # [Output Only] Unique identifier for the resource; defined by the server.
"items": [ # A list of resize request resources.
{ # InstanceGroupManagerResizeRequest represents a request to create a number of VMs: either immediately or by queuing the request for the specified time. This resize request is nested under InstanceGroupManager and the VMs created by this request are added to the owning InstanceGroupManager.
"count": 42, # This field is deprecated, please use resize_by instead. The count of instances to create as part of this resize request.
"creationTimestamp": "A String", # [Output Only] The creation timestamp for this resize request in RFC3339 text format.
"description": "A String", # An optional description of this resource.
"id": "A String", # [Output Only] A unique identifier for this resource type. The server generates this identifier.
"instances": [ # The list of specifications of per-instance configs to be created. This field cannot be used together with 'resize_by'.
{
"fingerprint": "A String", # Fingerprint of this per-instance config. This field can be used in optimistic locking. It is ignored when inserting a per-instance config. An up-to-date fingerprint must be provided in order to update an existing per-instance configuration or the field needs to be unset.
"name": "A String", # The name of a per-instance configuration and its corresponding instance. Serves as a merge key during UpdatePerInstanceConfigs operations, that is, if a per-instance configuration with the same name exists then it will be updated, otherwise a new one will be created for the VM instance with the same name. An attempt to create a per-instance configuration for a VM instance that either doesn't exist or is not part of the group will result in an error.
"preservedState": { # Preserved state for a given instance. # The intended preserved state for the given instance. Does not contain preserved state generated from a stateful policy.
"disks": { # Preserved disks defined for this instance. This map is keyed with the device names of the disks.
"a_key": {
"autoDelete": "A String", # These stateful disks will never be deleted during autohealing, update, instance recreate operations. This flag is used to configure if the disk should be deleted after it is no longer used by the group, e.g. when the given instance or the whole MIG is deleted. Note: disks attached in READ_ONLY mode cannot be auto-deleted.
"mode": "A String", # The mode in which to attach this disk, either READ_WRITE or READ_ONLY. If not specified, the default is to attach the disk in READ_WRITE mode.
"source": "A String", # The URL of the disk resource that is stateful and should be attached to the VM instance.
},
},
"externalIPs": { # Preserved external IPs defined for this instance. This map is keyed with the name of the network interface.
"a_key": {
"autoDelete": "A String", # These stateful IPs will never be released during autohealing, update or VM instance recreate operations. This flag is used to configure if the IP reservation should be deleted after it is no longer used by the group, e.g. when the given instance or the whole group is deleted.
"ipAddress": { # Ip address representation
"address": "A String", # The URL of the reservation for this IP address.
"literal": "A String", # An IPv4 internal network address to assign to the instance for this network interface.
},
},
},
"internalIPs": { # Preserved internal IPs defined for this instance. This map is keyed with the name of the network interface.
"a_key": {
"autoDelete": "A String", # These stateful IPs will never be released during autohealing, update or VM instance recreate operations. This flag is used to configure if the IP reservation should be deleted after it is no longer used by the group, e.g. when the given instance or the whole group is deleted.
"ipAddress": { # Ip address representation
"address": "A String", # The URL of the reservation for this IP address.
"literal": "A String", # An IPv4 internal network address to assign to the instance for this network interface.
},
},
},
"metadata": { # Preserved metadata defined for this instance.
"a_key": "A String",
},
},
"status": "A String", # The status of applying this per-instance configuration on the corresponding managed instance.
},
],
"kind": "compute#instanceGroupManagerResizeRequest", # [Output Only] The resource type, which is always compute#instanceGroupManagerResizeRequest for resize requests.
"name": "A String", # The name of this resize request. The name must be 1-63 characters long, and comply with RFC1035.
"queuingPolicy": { # Queuing parameters for the requested deferred capacity. # This field is deprecated, ResizeRequests would not be provisioned immediately and would stay in the queue until explicitly cancelled. When set, defines queing parameters for the requested deferred capacity. When unset, the request starts provisioning immediately, or fails if immediate provisioning is not possible.
"validUntilDuration": { # A Duration represents a fixed-length span of time represented as a count of seconds and fractions of seconds at nanosecond resolution. It is independent of any calendar and concepts like "day" or "month". Range is approximately 10,000 years. # Relative deadline for waiting for capacity.
"nanos": 42, # Span of time that's a fraction of a second at nanosecond resolution. Durations less than one second are represented with a 0 `seconds` field and a positive `nanos` field. Must be from 0 to 999,999,999 inclusive.
"seconds": "A String", # Span of time at a resolution of a second. Must be from 0 to 315,576,000,000 inclusive. Note: these bounds are computed from: 60 sec/min * 60 min/hr * 24 hr/day * 365.25 days/year * 10000 years
},
"validUntilTime": "A String", # Absolute deadline for waiting for capacity in RFC3339 text format.
},
"region": "A String", # [Output Only] The URL of a region where the resize request is located. Populated only for regional resize requests.
"requestedRunDuration": { # A Duration represents a fixed-length span of time represented as a count of seconds and fractions of seconds at nanosecond resolution. It is independent of any calendar and concepts like "day" or "month". Range is approximately 10,000 years. # Requested run duration for instances that will be created by this request. At the end of the run duration instance will be deleted.
"nanos": 42, # Span of time that's a fraction of a second at nanosecond resolution. Durations less than one second are represented with a 0 `seconds` field and a positive `nanos` field. Must be from 0 to 999,999,999 inclusive.
"seconds": "A String", # Span of time at a resolution of a second. Must be from 0 to 315,576,000,000 inclusive. Note: these bounds are computed from: 60 sec/min * 60 min/hr * 24 hr/day * 365.25 days/year * 10000 years
},
"resizeBy": 42, # The number of instances to be created by this resize request. The group's target size will be increased by this number. This field cannot be used together with 'instances'.
"selfLink": "A String", # [Output Only] The URL for this resize request. The server defines this URL.
"selfLinkWithId": "A String", # [Output Only] Server-defined URL for this resource with the resource id.
"state": "A String", # [Output only] Current state of the request.
"status": { # [Output only] Status of the request.
"error": { # [Output only] Fatal errors encountered during the queueing or provisioning phases of the ResizeRequest that caused the transition to the FAILED state. Contrary to the last_attempt errors, this field is final and errors are never removed from here, as the ResizeRequest is not going to retry.
"errors": [ # [Output Only] The array of errors encountered while processing this operation.
{
"code": "A String", # [Output Only] The error type identifier for this error.
"errorDetails": [ # [Output Only] An optional list of messages that contain the error details. There is a set of defined message types to use for providing details.The syntax depends on the error code. For example, QuotaExceededInfo will have details when the error code is QUOTA_EXCEEDED.
{
"errorInfo": { # Describes the cause of the error with structured details. Example of an error when contacting the "pubsub.googleapis.com" API when it is not enabled: { "reason": "API_DISABLED" "domain": "googleapis.com" "metadata": { "resource": "projects/123", "service": "pubsub.googleapis.com" } } This response indicates that the pubsub.googleapis.com API is not enabled. Example of an error that is returned when attempting to create a Spanner instance in a region that is out of stock: { "reason": "STOCKOUT" "domain": "spanner.googleapis.com", "metadata": { "availableRegions": "us-central1,us-east2" } }
"domain": "A String", # The logical grouping to which the "reason" belongs. The error domain is typically the registered service name of the tool or product that generates the error. Example: "pubsub.googleapis.com". If the error is generated by some common infrastructure, the error domain must be a globally unique value that identifies the infrastructure. For Google API infrastructure, the error domain is "googleapis.com".
"metadatas": { # Additional structured details about this error. Keys must match /a-z+/ but should ideally be lowerCamelCase. Also they must be limited to 64 characters in length. When identifying the current value of an exceeded limit, the units should be contained in the key, not the value. For example, rather than {"instanceLimit": "100/request"}, should be returned as, {"instanceLimitPerRequest": "100"}, if the client exceeds the number of instances that can be created in a single (batch) request.
"a_key": "A String",
},
"reason": "A String", # The reason of the error. This is a constant value that identifies the proximate cause of the error. Error reasons are unique within a particular domain of errors. This should be at most 63 characters and match a regular expression of `A-Z+[A-Z0-9]`, which represents UPPER_SNAKE_CASE.
},
"help": { # Provides links to documentation or for performing an out of band action. For example, if a quota check failed with an error indicating the calling project hasn't enabled the accessed service, this can contain a URL pointing directly to the right place in the developer console to flip the bit.
"links": [ # URL(s) pointing to additional information on handling the current error.
{ # Describes a URL link.
"description": "A String", # Describes what the link offers.
"url": "A String", # The URL of the link.
},
],
},
"localizedMessage": { # Provides a localized error message that is safe to return to the user which can be attached to an RPC error.
"locale": "A String", # The locale used following the specification defined at https://www.rfc-editor.org/rfc/bcp/bcp47.txt. Examples are: "en-US", "fr-CH", "es-MX"
"message": "A String", # The localized error message in the above locale.
},
"quotaInfo": { # Additional details for quota exceeded error for resource quota.
"dimensions": { # The map holding related quota dimensions.
"a_key": "A String",
},
"futureLimit": 3.14, # Future quota limit being rolled out. The limit's unit depends on the quota type or metric.
"limit": 3.14, # Current effective quota limit. The limit's unit depends on the quota type or metric.
"limitName": "A String", # The name of the quota limit.
"metricName": "A String", # The Compute Engine quota metric name.
"rolloutStatus": "A String", # Rollout status of the future quota limit.
},
},
],
"location": "A String", # [Output Only] Indicates the field in the request that caused the error. This property is optional.
"message": "A String", # [Output Only] An optional, human-readable error message.
},
],
},
"lastAttempt": { # [Output only] Information about the last attempt to fulfill the request. The value is temporary since the ResizeRequest can retry, as long as it's still active and the last attempt value can either be cleared or replaced with a different error. Since ResizeRequest retries infrequently, the value may be stale and no longer show an active problem. The value is cleared when ResizeRequest transitions to the final state (becomes inactive). If the final state is FAILED the error describing it will be storred in the "error" field only.
"error": { # Errors that prevented the ResizeRequest to be fulfilled.
"errors": [ # [Output Only] The array of errors encountered while processing this operation.
{
"code": "A String", # [Output Only] The error type identifier for this error.
"errorDetails": [ # [Output Only] An optional list of messages that contain the error details. There is a set of defined message types to use for providing details.The syntax depends on the error code. For example, QuotaExceededInfo will have details when the error code is QUOTA_EXCEEDED.
{
"errorInfo": { # Describes the cause of the error with structured details. Example of an error when contacting the "pubsub.googleapis.com" API when it is not enabled: { "reason": "API_DISABLED" "domain": "googleapis.com" "metadata": { "resource": "projects/123", "service": "pubsub.googleapis.com" } } This response indicates that the pubsub.googleapis.com API is not enabled. Example of an error that is returned when attempting to create a Spanner instance in a region that is out of stock: { "reason": "STOCKOUT" "domain": "spanner.googleapis.com", "metadata": { "availableRegions": "us-central1,us-east2" } }
"domain": "A String", # The logical grouping to which the "reason" belongs. The error domain is typically the registered service name of the tool or product that generates the error. Example: "pubsub.googleapis.com". If the error is generated by some common infrastructure, the error domain must be a globally unique value that identifies the infrastructure. For Google API infrastructure, the error domain is "googleapis.com".
"metadatas": { # Additional structured details about this error. Keys must match /a-z+/ but should ideally be lowerCamelCase. Also they must be limited to 64 characters in length. When identifying the current value of an exceeded limit, the units should be contained in the key, not the value. For example, rather than {"instanceLimit": "100/request"}, should be returned as, {"instanceLimitPerRequest": "100"}, if the client exceeds the number of instances that can be created in a single (batch) request.
"a_key": "A String",
},
"reason": "A String", # The reason of the error. This is a constant value that identifies the proximate cause of the error. Error reasons are unique within a particular domain of errors. This should be at most 63 characters and match a regular expression of `A-Z+[A-Z0-9]`, which represents UPPER_SNAKE_CASE.
},
"help": { # Provides links to documentation or for performing an out of band action. For example, if a quota check failed with an error indicating the calling project hasn't enabled the accessed service, this can contain a URL pointing directly to the right place in the developer console to flip the bit.
"links": [ # URL(s) pointing to additional information on handling the current error.
{ # Describes a URL link.
"description": "A String", # Describes what the link offers.
"url": "A String", # The URL of the link.
},
],
},
"localizedMessage": { # Provides a localized error message that is safe to return to the user which can be attached to an RPC error.
"locale": "A String", # The locale used following the specification defined at https://www.rfc-editor.org/rfc/bcp/bcp47.txt. Examples are: "en-US", "fr-CH", "es-MX"
"message": "A String", # The localized error message in the above locale.
},
"quotaInfo": { # Additional details for quota exceeded error for resource quota.
"dimensions": { # The map holding related quota dimensions.
"a_key": "A String",
},
"futureLimit": 3.14, # Future quota limit being rolled out. The limit's unit depends on the quota type or metric.
"limit": 3.14, # Current effective quota limit. The limit's unit depends on the quota type or metric.
"limitName": "A String", # The name of the quota limit.
"metricName": "A String", # The Compute Engine quota metric name.
"rolloutStatus": "A String", # Rollout status of the future quota limit.
},
},
],
"location": "A String", # [Output Only] Indicates the field in the request that caused the error. This property is optional.
"message": "A String", # [Output Only] An optional, human-readable error message.
},
],
},
},
"queuingPolicy": { # Queuing parameters for the requested deferred capacity. # This field is deprecated, setting queueing policy is no longer supported. Constraints for the time when the instances start provisioning. Always exposed as absolute time.
"validUntilDuration": { # A Duration represents a fixed-length span of time represented as a count of seconds and fractions of seconds at nanosecond resolution. It is independent of any calendar and concepts like "day" or "month". Range is approximately 10,000 years. # Relative deadline for waiting for capacity.
"nanos": 42, # Span of time that's a fraction of a second at nanosecond resolution. Durations less than one second are represented with a 0 `seconds` field and a positive `nanos` field. Must be from 0 to 999,999,999 inclusive.
"seconds": "A String", # Span of time at a resolution of a second. Must be from 0 to 315,576,000,000 inclusive. Note: these bounds are computed from: 60 sec/min * 60 min/hr * 24 hr/day * 365.25 days/year * 10000 years
},
"validUntilTime": "A String", # Absolute deadline for waiting for capacity in RFC3339 text format.
},
},
"zone": "A String", # [Output Only] The URL of a zone where the resize request is located. Populated only for zonal resize requests.
},
],
"kind": "compute#instanceGroupManagerResizeRequestList", # [Output Only] Type of the resource. Always compute#instanceGroupManagerResizeRequestList for a list of resize requests.
"nextPageToken": "A String", # [Output Only] This token allows you to get the next page of results for list requests. If the number of results is larger than maxResults, use the nextPageToken as a value for the query parameter pageToken in the next list request. Subsequent list requests will have their own nextPageToken to continue paging through the results.
"selfLink": "A String", # [Output Only] Server-defined URL for this resource.
"warning": { # [Output Only] Informational warning message.
"code": "A String", # [Output Only] A warning code, if applicable. For example, Compute Engine returns NO_RESULTS_ON_PAGE if there are no results in the response.
"data": [ # [Output Only] Metadata about this warning in key: value format. For example: "data": [ { "key": "scope", "value": "zones/us-east1-d" }
{
"key": "A String", # [Output Only] A key that provides more detail on the warning being returned. For example, for warnings where there are no results in a list request for a particular zone, this key might be scope and the key value might be the zone name. Other examples might be a key indicating a deprecated resource and a suggested replacement, or a warning about invalid network settings (for example, if an instance attempts to perform IP forwarding but is not enabled for IP forwarding).
"value": "A String", # [Output Only] A warning data value corresponding to the key.
},
],
"message": "A String", # [Output Only] A human-readable description of the warning code.
},
}
list_next()
Retrieves the next page of results.
Args:
previous_request: The request for the previous page. (required)
previous_response: The response from the request for the previous page. (required)
Returns:
A request object that you can call 'execute()' on to request the next
page. Returns None if there are no more items in the collection.