Compute Engine API . projects

Instance Methods

close()

Close httplib2 connections.

disableXpnHost(project, requestId=None, x__xgafv=None)

Disable this project as a shared VPC host project.

disableXpnResource(project, body=None, requestId=None, x__xgafv=None)

Disable a service resource (also known as service project) associated with this host project.

enableXpnHost(project, requestId=None, x__xgafv=None)

Enable this project as a shared VPC host project.

enableXpnResource(project, body=None, requestId=None, x__xgafv=None)

Enable service resource (a.k.a service project) for a host project, so that subnets in the host project can be used by instances in the service project.

get(project, x__xgafv=None)

Returns the specified Project resource. To decrease latency for this method, you can optionally omit any unneeded information from the response by using a field mask. This practice is especially recommended for unused quota information (the `quotas` field). To exclude one or more fields, set your request's `fields` query parameter to only include the fields you need. For example, to only include the `id` and `selfLink` fields, add the query parameter `?fields=id,selfLink` to your request.

getXpnHost(project, x__xgafv=None)

Gets the shared VPC host project that this project links to. May be empty if no link exists.

getXpnResources(project, filter=None, maxResults=None, orderBy=None, pageToken=None, returnPartialSuccess=None, x__xgafv=None)

Gets service resources (a.k.a service project) associated with this host project.

getXpnResources_next()

Retrieves the next page of results.

listXpnHosts(project, body=None, filter=None, maxResults=None, orderBy=None, pageToken=None, returnPartialSuccess=None, x__xgafv=None)

Lists all shared VPC host projects visible to the user in an organization.

listXpnHosts_next()

Retrieves the next page of results.

moveDisk(project, body=None, requestId=None, x__xgafv=None)

Moves a persistent disk from one zone to another.

moveInstance(project, body=None, requestId=None, x__xgafv=None)

Moves an instance and its attached persistent disks from one zone to another. *Note*: Moving VMs or disks by using this method might cause unexpected behavior. For more information, see the [known issue](/compute/docs/troubleshooting/known-issues#moving_vms_or_disks_using_the_moveinstance_api_or_the_causes_unexpected_behavior). [Deprecated] This method is deprecated. See [moving instance across zones](/compute/docs/instances/moving-instance-across-zones) instead.

setCloudArmorTier(project, body=None, requestId=None, x__xgafv=None)

Sets the Cloud Armor tier of the project. To set ENTERPRISE or above the billing account of the project must be subscribed to Cloud Armor Enterprise. See Subscribing to Cloud Armor Enterprise for more information.

setCommonInstanceMetadata(project, body=None, requestId=None, x__xgafv=None)

Sets metadata common to all instances within the specified project using the data included in the request.

setDefaultNetworkTier(project, body=None, requestId=None, x__xgafv=None)

Sets the default network tier of the project. The default network tier is used when an address/forwardingRule/instance is created without specifying the network tier field.

setDefaultServiceAccount(project, body=None, requestId=None, x__xgafv=None)

Sets the default service account of the project. The default service account is used when a VM instance is created with the service account email address set to "default".

setManagedProtectionTier(project, body=None, requestId=None, x__xgafv=None)

Sets the Cloud Armor Managed Protection (CAMP) tier of the project. To set PLUS or above the billing account of the project must be subscribed to Managed Protection Plus. See Subscribing to Managed Protection Plus for more information.

setUsageExportBucket(project, body=None, requestId=None, x__xgafv=None)

Enables the usage export feature and sets the usage export bucket where reports are stored. If you provide an empty request body using this method, the usage export feature will be disabled.

Method Details

close()
Close httplib2 connections.
disableXpnHost(project, requestId=None, x__xgafv=None)
Disable this project as a shared VPC host project.

Args:
  project: string, Project ID for this request. (required)
  requestId: string, An optional request ID to identify requests. Specify a unique request ID so that if you must retry your request, the server will know to ignore the request if it has already been completed. For example, consider a situation where you make an initial request and the request times out. If you make the request again with the same request ID, the server can check if original operation with the same request ID was received, and if so, will ignore the second request. This prevents clients from accidentally creating duplicate commitments. The request ID must be a valid UUID with the exception that zero UUID is not supported ( 00000000-0000-0000-0000-000000000000).
  x__xgafv: string, V1 error format.
    Allowed values
      1 - v1 error format
      2 - v2 error format

Returns:
  An object of the form:

    { # Represents an Operation resource. Google Compute Engine has three Operation resources: * [Global](/compute/docs/reference/rest/alpha/globalOperations) * [Regional](/compute/docs/reference/rest/alpha/regionOperations) * [Zonal](/compute/docs/reference/rest/alpha/zoneOperations) You can use an operation resource to manage asynchronous API requests. For more information, read Handling API responses. Operations can be global, regional or zonal. - For global operations, use the `globalOperations` resource. - For regional operations, use the `regionOperations` resource. - For zonal operations, use the `zoneOperations` resource. For more information, read Global, Regional, and Zonal Resources. Note that completed Operation resources have a limited retention period.
  "clientOperationId": "A String", # [Output Only] The value of `requestId` if you provided it in the request. Not present otherwise.
  "creationTimestamp": "A String", # [Deprecated] This field is deprecated.
  "description": "A String", # [Output Only] A textual description of the operation, which is set when the operation is created.
  "endTime": "A String", # [Output Only] The time that this operation was completed. This value is in RFC3339 text format.
  "error": { # [Output Only] If errors are generated during processing of the operation, this field will be populated.
    "errors": [ # [Output Only] The array of errors encountered while processing this operation.
      {
        "code": "A String", # [Output Only] The error type identifier for this error.
        "errorDetails": [ # [Output Only] An optional list of messages that contain the error details. There is a set of defined message types to use for providing details.The syntax depends on the error code. For example, QuotaExceededInfo will have details when the error code is QUOTA_EXCEEDED.
          {
            "errorInfo": { # Describes the cause of the error with structured details. Example of an error when contacting the "pubsub.googleapis.com" API when it is not enabled: { "reason": "API_DISABLED" "domain": "googleapis.com" "metadata": { "resource": "projects/123", "service": "pubsub.googleapis.com" } } This response indicates that the pubsub.googleapis.com API is not enabled. Example of an error that is returned when attempting to create a Spanner instance in a region that is out of stock: { "reason": "STOCKOUT" "domain": "spanner.googleapis.com", "metadata": { "availableRegions": "us-central1,us-east2" } }
              "domain": "A String", # The logical grouping to which the "reason" belongs. The error domain is typically the registered service name of the tool or product that generates the error. Example: "pubsub.googleapis.com". If the error is generated by some common infrastructure, the error domain must be a globally unique value that identifies the infrastructure. For Google API infrastructure, the error domain is "googleapis.com".
              "metadatas": { # Additional structured details about this error. Keys should match /[a-zA-Z0-9-_]/ and be limited to 64 characters in length. When identifying the current value of an exceeded limit, the units should be contained in the key, not the value. For example, rather than {"instanceLimit": "100/request"}, should be returned as, {"instanceLimitPerRequest": "100"}, if the client exceeds the number of instances that can be created in a single (batch) request.
                "a_key": "A String",
              },
              "reason": "A String", # The reason of the error. This is a constant value that identifies the proximate cause of the error. Error reasons are unique within a particular domain of errors. This should be at most 63 characters and match a regular expression of `A-Z+[A-Z0-9]`, which represents UPPER_SNAKE_CASE.
            },
            "help": { # Provides links to documentation or for performing an out of band action. For example, if a quota check failed with an error indicating the calling project hasn't enabled the accessed service, this can contain a URL pointing directly to the right place in the developer console to flip the bit.
              "links": [ # URL(s) pointing to additional information on handling the current error.
                { # Describes a URL link.
                  "description": "A String", # Describes what the link offers.
                  "url": "A String", # The URL of the link.
                },
              ],
            },
            "localizedMessage": { # Provides a localized error message that is safe to return to the user which can be attached to an RPC error.
              "locale": "A String", # The locale used following the specification defined at https://www.rfc-editor.org/rfc/bcp/bcp47.txt. Examples are: "en-US", "fr-CH", "es-MX"
              "message": "A String", # The localized error message in the above locale.
            },
            "quotaInfo": { # Additional details for quota exceeded error for resource quota.
              "dimensions": { # The map holding related quota dimensions.
                "a_key": "A String",
              },
              "futureLimit": 3.14, # Future quota limit being rolled out. The limit's unit depends on the quota type or metric.
              "limit": 3.14, # Current effective quota limit. The limit's unit depends on the quota type or metric.
              "limitName": "A String", # The name of the quota limit.
              "metricName": "A String", # The Compute Engine quota metric name.
              "rolloutStatus": "A String", # Rollout status of the future quota limit.
            },
          },
        ],
        "location": "A String", # [Output Only] Indicates the field in the request that caused the error. This property is optional.
        "message": "A String", # [Output Only] An optional, human-readable error message.
      },
    ],
  },
  "httpErrorMessage": "A String", # [Output Only] If the operation fails, this field contains the HTTP error message that was returned, such as `NOT FOUND`.
  "httpErrorStatusCode": 42, # [Output Only] If the operation fails, this field contains the HTTP error status code that was returned. For example, a `404` means the resource was not found.
  "id": "A String", # [Output Only] The unique identifier for the operation. This identifier is defined by the server.
  "insertTime": "A String", # [Output Only] The time that this operation was requested. This value is in RFC3339 text format.
  "instancesBulkInsertOperationMetadata": {
    "perLocationStatus": { # Status information per location (location name is key). Example key: zones/us-central1-a
      "a_key": {
        "createdVmCount": 42, # [Output Only] Count of VMs successfully created so far.
        "deletedVmCount": 42, # [Output Only] Count of VMs that got deleted during rollback.
        "failedToCreateVmCount": 42, # [Output Only] Count of VMs that started creating but encountered an error.
        "status": "A String", # [Output Only] Creation status of BulkInsert operation - information if the flow is rolling forward or rolling back.
        "targetVmCount": 42, # [Output Only] Count of VMs originally planned to be created.
      },
    },
  },
  "kind": "compute#operation", # [Output Only] Type of the resource. Always `compute#operation` for Operation resources.
  "name": "A String", # [Output Only] Name of the operation.
  "operationGroupId": "A String", # [Output Only] An ID that represents a group of operations, such as when a group of operations results from a `bulkInsert` API request.
  "operationType": "A String", # [Output Only] The type of operation, such as `insert`, `update`, or `delete`, and so on.
  "progress": 42, # [Output Only] An optional progress indicator that ranges from 0 to 100. There is no requirement that this be linear or support any granularity of operations. This should not be used to guess when the operation will be complete. This number should monotonically increase as the operation progresses.
  "region": "A String", # [Output Only] The URL of the region where the operation resides. Only applicable when performing regional operations.
  "selfLink": "A String", # [Output Only] Server-defined URL for the resource.
  "selfLinkWithId": "A String", # [Output Only] Server-defined URL for this resource with the resource id.
  "setCommonInstanceMetadataOperationMetadata": { # [Output Only] If the operation is for projects.setCommonInstanceMetadata, this field will contain information on all underlying zonal actions and their state.
    "clientOperationId": "A String", # [Output Only] The client operation id.
    "perLocationOperations": { # [Output Only] Status information per location (location name is key). Example key: zones/us-central1-a
      "a_key": {
        "error": { # The `Status` type defines a logical error model that is suitable for different programming environments, including REST APIs and RPC APIs. It is used by [gRPC](https://github.com/grpc). Each `Status` message contains three pieces of data: error code, error message, and error details. You can find out more about this error model and how to work with it in the [API Design Guide](https://cloud.google.com/apis/design/errors). # [Output Only] If state is `ABANDONED` or `FAILED`, this field is populated.
          "code": 42, # The status code, which should be an enum value of google.rpc.Code.
          "details": [ # A list of messages that carry the error details. There is a common set of message types for APIs to use.
            {
              "a_key": "", # Properties of the object. Contains field @type with type URL.
            },
          ],
          "message": "A String", # A developer-facing error message, which should be in English. Any user-facing error message should be localized and sent in the google.rpc.Status.details field, or localized by the client.
        },
        "state": "A String", # [Output Only] Status of the action, which can be one of the following: `PROPAGATING`, `PROPAGATED`, `ABANDONED`, `FAILED`, or `DONE`.
      },
    },
  },
  "startTime": "A String", # [Output Only] The time that this operation was started by the server. This value is in RFC3339 text format.
  "status": "A String", # [Output Only] The status of the operation, which can be one of the following: `PENDING`, `RUNNING`, or `DONE`.
  "statusMessage": "A String", # [Output Only] An optional textual description of the current status of the operation.
  "targetId": "A String", # [Output Only] The unique target ID, which identifies a specific incarnation of the target resource.
  "targetLink": "A String", # [Output Only] The URL of the resource that the operation modifies. For operations related to creating a snapshot, this points to the persistent disk that the snapshot was created from.
  "user": "A String", # [Output Only] User who requested the operation, for example: `user@example.com` or `alice_smith_identifier (global/workforcePools/example-com-us-employees)`.
  "warnings": [ # [Output Only] If warning messages are generated during processing of the operation, this field will be populated.
    {
      "code": "A String", # [Output Only] A warning code, if applicable. For example, Compute Engine returns NO_RESULTS_ON_PAGE if there are no results in the response.
      "data": [ # [Output Only] Metadata about this warning in key: value format. For example: "data": [ { "key": "scope", "value": "zones/us-east1-d" }
        {
          "key": "A String", # [Output Only] A key that provides more detail on the warning being returned. For example, for warnings where there are no results in a list request for a particular zone, this key might be scope and the key value might be the zone name. Other examples might be a key indicating a deprecated resource and a suggested replacement, or a warning about invalid network settings (for example, if an instance attempts to perform IP forwarding but is not enabled for IP forwarding).
          "value": "A String", # [Output Only] A warning data value corresponding to the key.
        },
      ],
      "message": "A String", # [Output Only] A human-readable description of the warning code.
    },
  ],
  "zone": "A String", # [Output Only] The URL of the zone where the operation resides. Only applicable when performing per-zone operations.
}
disableXpnResource(project, body=None, requestId=None, x__xgafv=None)
Disable a service resource (also known as service project) associated with this host project.

Args:
  project: string, Project ID for this request. (required)
  body: object, The request body.
    The object takes the form of:

{
  "xpnResource": { # Service resource (a.k.a service project) ID. # Service resource (a.k.a service project) ID.
    "id": "A String", # The ID of the service resource. In the case of projects, this field supports project id (e.g., my-project-123) and project number (e.g. 12345678).
    "type": "A String", # The type of the service resource.
  },
}

  requestId: string, An optional request ID to identify requests. Specify a unique request ID so that if you must retry your request, the server will know to ignore the request if it has already been completed. For example, consider a situation where you make an initial request and the request times out. If you make the request again with the same request ID, the server can check if original operation with the same request ID was received, and if so, will ignore the second request. This prevents clients from accidentally creating duplicate commitments. The request ID must be a valid UUID with the exception that zero UUID is not supported ( 00000000-0000-0000-0000-000000000000).
  x__xgafv: string, V1 error format.
    Allowed values
      1 - v1 error format
      2 - v2 error format

Returns:
  An object of the form:

    { # Represents an Operation resource. Google Compute Engine has three Operation resources: * [Global](/compute/docs/reference/rest/alpha/globalOperations) * [Regional](/compute/docs/reference/rest/alpha/regionOperations) * [Zonal](/compute/docs/reference/rest/alpha/zoneOperations) You can use an operation resource to manage asynchronous API requests. For more information, read Handling API responses. Operations can be global, regional or zonal. - For global operations, use the `globalOperations` resource. - For regional operations, use the `regionOperations` resource. - For zonal operations, use the `zoneOperations` resource. For more information, read Global, Regional, and Zonal Resources. Note that completed Operation resources have a limited retention period.
  "clientOperationId": "A String", # [Output Only] The value of `requestId` if you provided it in the request. Not present otherwise.
  "creationTimestamp": "A String", # [Deprecated] This field is deprecated.
  "description": "A String", # [Output Only] A textual description of the operation, which is set when the operation is created.
  "endTime": "A String", # [Output Only] The time that this operation was completed. This value is in RFC3339 text format.
  "error": { # [Output Only] If errors are generated during processing of the operation, this field will be populated.
    "errors": [ # [Output Only] The array of errors encountered while processing this operation.
      {
        "code": "A String", # [Output Only] The error type identifier for this error.
        "errorDetails": [ # [Output Only] An optional list of messages that contain the error details. There is a set of defined message types to use for providing details.The syntax depends on the error code. For example, QuotaExceededInfo will have details when the error code is QUOTA_EXCEEDED.
          {
            "errorInfo": { # Describes the cause of the error with structured details. Example of an error when contacting the "pubsub.googleapis.com" API when it is not enabled: { "reason": "API_DISABLED" "domain": "googleapis.com" "metadata": { "resource": "projects/123", "service": "pubsub.googleapis.com" } } This response indicates that the pubsub.googleapis.com API is not enabled. Example of an error that is returned when attempting to create a Spanner instance in a region that is out of stock: { "reason": "STOCKOUT" "domain": "spanner.googleapis.com", "metadata": { "availableRegions": "us-central1,us-east2" } }
              "domain": "A String", # The logical grouping to which the "reason" belongs. The error domain is typically the registered service name of the tool or product that generates the error. Example: "pubsub.googleapis.com". If the error is generated by some common infrastructure, the error domain must be a globally unique value that identifies the infrastructure. For Google API infrastructure, the error domain is "googleapis.com".
              "metadatas": { # Additional structured details about this error. Keys should match /[a-zA-Z0-9-_]/ and be limited to 64 characters in length. When identifying the current value of an exceeded limit, the units should be contained in the key, not the value. For example, rather than {"instanceLimit": "100/request"}, should be returned as, {"instanceLimitPerRequest": "100"}, if the client exceeds the number of instances that can be created in a single (batch) request.
                "a_key": "A String",
              },
              "reason": "A String", # The reason of the error. This is a constant value that identifies the proximate cause of the error. Error reasons are unique within a particular domain of errors. This should be at most 63 characters and match a regular expression of `A-Z+[A-Z0-9]`, which represents UPPER_SNAKE_CASE.
            },
            "help": { # Provides links to documentation or for performing an out of band action. For example, if a quota check failed with an error indicating the calling project hasn't enabled the accessed service, this can contain a URL pointing directly to the right place in the developer console to flip the bit.
              "links": [ # URL(s) pointing to additional information on handling the current error.
                { # Describes a URL link.
                  "description": "A String", # Describes what the link offers.
                  "url": "A String", # The URL of the link.
                },
              ],
            },
            "localizedMessage": { # Provides a localized error message that is safe to return to the user which can be attached to an RPC error.
              "locale": "A String", # The locale used following the specification defined at https://www.rfc-editor.org/rfc/bcp/bcp47.txt. Examples are: "en-US", "fr-CH", "es-MX"
              "message": "A String", # The localized error message in the above locale.
            },
            "quotaInfo": { # Additional details for quota exceeded error for resource quota.
              "dimensions": { # The map holding related quota dimensions.
                "a_key": "A String",
              },
              "futureLimit": 3.14, # Future quota limit being rolled out. The limit's unit depends on the quota type or metric.
              "limit": 3.14, # Current effective quota limit. The limit's unit depends on the quota type or metric.
              "limitName": "A String", # The name of the quota limit.
              "metricName": "A String", # The Compute Engine quota metric name.
              "rolloutStatus": "A String", # Rollout status of the future quota limit.
            },
          },
        ],
        "location": "A String", # [Output Only] Indicates the field in the request that caused the error. This property is optional.
        "message": "A String", # [Output Only] An optional, human-readable error message.
      },
    ],
  },
  "httpErrorMessage": "A String", # [Output Only] If the operation fails, this field contains the HTTP error message that was returned, such as `NOT FOUND`.
  "httpErrorStatusCode": 42, # [Output Only] If the operation fails, this field contains the HTTP error status code that was returned. For example, a `404` means the resource was not found.
  "id": "A String", # [Output Only] The unique identifier for the operation. This identifier is defined by the server.
  "insertTime": "A String", # [Output Only] The time that this operation was requested. This value is in RFC3339 text format.
  "instancesBulkInsertOperationMetadata": {
    "perLocationStatus": { # Status information per location (location name is key). Example key: zones/us-central1-a
      "a_key": {
        "createdVmCount": 42, # [Output Only] Count of VMs successfully created so far.
        "deletedVmCount": 42, # [Output Only] Count of VMs that got deleted during rollback.
        "failedToCreateVmCount": 42, # [Output Only] Count of VMs that started creating but encountered an error.
        "status": "A String", # [Output Only] Creation status of BulkInsert operation - information if the flow is rolling forward or rolling back.
        "targetVmCount": 42, # [Output Only] Count of VMs originally planned to be created.
      },
    },
  },
  "kind": "compute#operation", # [Output Only] Type of the resource. Always `compute#operation` for Operation resources.
  "name": "A String", # [Output Only] Name of the operation.
  "operationGroupId": "A String", # [Output Only] An ID that represents a group of operations, such as when a group of operations results from a `bulkInsert` API request.
  "operationType": "A String", # [Output Only] The type of operation, such as `insert`, `update`, or `delete`, and so on.
  "progress": 42, # [Output Only] An optional progress indicator that ranges from 0 to 100. There is no requirement that this be linear or support any granularity of operations. This should not be used to guess when the operation will be complete. This number should monotonically increase as the operation progresses.
  "region": "A String", # [Output Only] The URL of the region where the operation resides. Only applicable when performing regional operations.
  "selfLink": "A String", # [Output Only] Server-defined URL for the resource.
  "selfLinkWithId": "A String", # [Output Only] Server-defined URL for this resource with the resource id.
  "setCommonInstanceMetadataOperationMetadata": { # [Output Only] If the operation is for projects.setCommonInstanceMetadata, this field will contain information on all underlying zonal actions and their state.
    "clientOperationId": "A String", # [Output Only] The client operation id.
    "perLocationOperations": { # [Output Only] Status information per location (location name is key). Example key: zones/us-central1-a
      "a_key": {
        "error": { # The `Status` type defines a logical error model that is suitable for different programming environments, including REST APIs and RPC APIs. It is used by [gRPC](https://github.com/grpc). Each `Status` message contains three pieces of data: error code, error message, and error details. You can find out more about this error model and how to work with it in the [API Design Guide](https://cloud.google.com/apis/design/errors). # [Output Only] If state is `ABANDONED` or `FAILED`, this field is populated.
          "code": 42, # The status code, which should be an enum value of google.rpc.Code.
          "details": [ # A list of messages that carry the error details. There is a common set of message types for APIs to use.
            {
              "a_key": "", # Properties of the object. Contains field @type with type URL.
            },
          ],
          "message": "A String", # A developer-facing error message, which should be in English. Any user-facing error message should be localized and sent in the google.rpc.Status.details field, or localized by the client.
        },
        "state": "A String", # [Output Only] Status of the action, which can be one of the following: `PROPAGATING`, `PROPAGATED`, `ABANDONED`, `FAILED`, or `DONE`.
      },
    },
  },
  "startTime": "A String", # [Output Only] The time that this operation was started by the server. This value is in RFC3339 text format.
  "status": "A String", # [Output Only] The status of the operation, which can be one of the following: `PENDING`, `RUNNING`, or `DONE`.
  "statusMessage": "A String", # [Output Only] An optional textual description of the current status of the operation.
  "targetId": "A String", # [Output Only] The unique target ID, which identifies a specific incarnation of the target resource.
  "targetLink": "A String", # [Output Only] The URL of the resource that the operation modifies. For operations related to creating a snapshot, this points to the persistent disk that the snapshot was created from.
  "user": "A String", # [Output Only] User who requested the operation, for example: `user@example.com` or `alice_smith_identifier (global/workforcePools/example-com-us-employees)`.
  "warnings": [ # [Output Only] If warning messages are generated during processing of the operation, this field will be populated.
    {
      "code": "A String", # [Output Only] A warning code, if applicable. For example, Compute Engine returns NO_RESULTS_ON_PAGE if there are no results in the response.
      "data": [ # [Output Only] Metadata about this warning in key: value format. For example: "data": [ { "key": "scope", "value": "zones/us-east1-d" }
        {
          "key": "A String", # [Output Only] A key that provides more detail on the warning being returned. For example, for warnings where there are no results in a list request for a particular zone, this key might be scope and the key value might be the zone name. Other examples might be a key indicating a deprecated resource and a suggested replacement, or a warning about invalid network settings (for example, if an instance attempts to perform IP forwarding but is not enabled for IP forwarding).
          "value": "A String", # [Output Only] A warning data value corresponding to the key.
        },
      ],
      "message": "A String", # [Output Only] A human-readable description of the warning code.
    },
  ],
  "zone": "A String", # [Output Only] The URL of the zone where the operation resides. Only applicable when performing per-zone operations.
}
enableXpnHost(project, requestId=None, x__xgafv=None)
Enable this project as a shared VPC host project.

Args:
  project: string, Project ID for this request. (required)
  requestId: string, An optional request ID to identify requests. Specify a unique request ID so that if you must retry your request, the server will know to ignore the request if it has already been completed. For example, consider a situation where you make an initial request and the request times out. If you make the request again with the same request ID, the server can check if original operation with the same request ID was received, and if so, will ignore the second request. This prevents clients from accidentally creating duplicate commitments. The request ID must be a valid UUID with the exception that zero UUID is not supported ( 00000000-0000-0000-0000-000000000000).
  x__xgafv: string, V1 error format.
    Allowed values
      1 - v1 error format
      2 - v2 error format

Returns:
  An object of the form:

    { # Represents an Operation resource. Google Compute Engine has three Operation resources: * [Global](/compute/docs/reference/rest/alpha/globalOperations) * [Regional](/compute/docs/reference/rest/alpha/regionOperations) * [Zonal](/compute/docs/reference/rest/alpha/zoneOperations) You can use an operation resource to manage asynchronous API requests. For more information, read Handling API responses. Operations can be global, regional or zonal. - For global operations, use the `globalOperations` resource. - For regional operations, use the `regionOperations` resource. - For zonal operations, use the `zoneOperations` resource. For more information, read Global, Regional, and Zonal Resources. Note that completed Operation resources have a limited retention period.
  "clientOperationId": "A String", # [Output Only] The value of `requestId` if you provided it in the request. Not present otherwise.
  "creationTimestamp": "A String", # [Deprecated] This field is deprecated.
  "description": "A String", # [Output Only] A textual description of the operation, which is set when the operation is created.
  "endTime": "A String", # [Output Only] The time that this operation was completed. This value is in RFC3339 text format.
  "error": { # [Output Only] If errors are generated during processing of the operation, this field will be populated.
    "errors": [ # [Output Only] The array of errors encountered while processing this operation.
      {
        "code": "A String", # [Output Only] The error type identifier for this error.
        "errorDetails": [ # [Output Only] An optional list of messages that contain the error details. There is a set of defined message types to use for providing details.The syntax depends on the error code. For example, QuotaExceededInfo will have details when the error code is QUOTA_EXCEEDED.
          {
            "errorInfo": { # Describes the cause of the error with structured details. Example of an error when contacting the "pubsub.googleapis.com" API when it is not enabled: { "reason": "API_DISABLED" "domain": "googleapis.com" "metadata": { "resource": "projects/123", "service": "pubsub.googleapis.com" } } This response indicates that the pubsub.googleapis.com API is not enabled. Example of an error that is returned when attempting to create a Spanner instance in a region that is out of stock: { "reason": "STOCKOUT" "domain": "spanner.googleapis.com", "metadata": { "availableRegions": "us-central1,us-east2" } }
              "domain": "A String", # The logical grouping to which the "reason" belongs. The error domain is typically the registered service name of the tool or product that generates the error. Example: "pubsub.googleapis.com". If the error is generated by some common infrastructure, the error domain must be a globally unique value that identifies the infrastructure. For Google API infrastructure, the error domain is "googleapis.com".
              "metadatas": { # Additional structured details about this error. Keys should match /[a-zA-Z0-9-_]/ and be limited to 64 characters in length. When identifying the current value of an exceeded limit, the units should be contained in the key, not the value. For example, rather than {"instanceLimit": "100/request"}, should be returned as, {"instanceLimitPerRequest": "100"}, if the client exceeds the number of instances that can be created in a single (batch) request.
                "a_key": "A String",
              },
              "reason": "A String", # The reason of the error. This is a constant value that identifies the proximate cause of the error. Error reasons are unique within a particular domain of errors. This should be at most 63 characters and match a regular expression of `A-Z+[A-Z0-9]`, which represents UPPER_SNAKE_CASE.
            },
            "help": { # Provides links to documentation or for performing an out of band action. For example, if a quota check failed with an error indicating the calling project hasn't enabled the accessed service, this can contain a URL pointing directly to the right place in the developer console to flip the bit.
              "links": [ # URL(s) pointing to additional information on handling the current error.
                { # Describes a URL link.
                  "description": "A String", # Describes what the link offers.
                  "url": "A String", # The URL of the link.
                },
              ],
            },
            "localizedMessage": { # Provides a localized error message that is safe to return to the user which can be attached to an RPC error.
              "locale": "A String", # The locale used following the specification defined at https://www.rfc-editor.org/rfc/bcp/bcp47.txt. Examples are: "en-US", "fr-CH", "es-MX"
              "message": "A String", # The localized error message in the above locale.
            },
            "quotaInfo": { # Additional details for quota exceeded error for resource quota.
              "dimensions": { # The map holding related quota dimensions.
                "a_key": "A String",
              },
              "futureLimit": 3.14, # Future quota limit being rolled out. The limit's unit depends on the quota type or metric.
              "limit": 3.14, # Current effective quota limit. The limit's unit depends on the quota type or metric.
              "limitName": "A String", # The name of the quota limit.
              "metricName": "A String", # The Compute Engine quota metric name.
              "rolloutStatus": "A String", # Rollout status of the future quota limit.
            },
          },
        ],
        "location": "A String", # [Output Only] Indicates the field in the request that caused the error. This property is optional.
        "message": "A String", # [Output Only] An optional, human-readable error message.
      },
    ],
  },
  "httpErrorMessage": "A String", # [Output Only] If the operation fails, this field contains the HTTP error message that was returned, such as `NOT FOUND`.
  "httpErrorStatusCode": 42, # [Output Only] If the operation fails, this field contains the HTTP error status code that was returned. For example, a `404` means the resource was not found.
  "id": "A String", # [Output Only] The unique identifier for the operation. This identifier is defined by the server.
  "insertTime": "A String", # [Output Only] The time that this operation was requested. This value is in RFC3339 text format.
  "instancesBulkInsertOperationMetadata": {
    "perLocationStatus": { # Status information per location (location name is key). Example key: zones/us-central1-a
      "a_key": {
        "createdVmCount": 42, # [Output Only] Count of VMs successfully created so far.
        "deletedVmCount": 42, # [Output Only] Count of VMs that got deleted during rollback.
        "failedToCreateVmCount": 42, # [Output Only] Count of VMs that started creating but encountered an error.
        "status": "A String", # [Output Only] Creation status of BulkInsert operation - information if the flow is rolling forward or rolling back.
        "targetVmCount": 42, # [Output Only] Count of VMs originally planned to be created.
      },
    },
  },
  "kind": "compute#operation", # [Output Only] Type of the resource. Always `compute#operation` for Operation resources.
  "name": "A String", # [Output Only] Name of the operation.
  "operationGroupId": "A String", # [Output Only] An ID that represents a group of operations, such as when a group of operations results from a `bulkInsert` API request.
  "operationType": "A String", # [Output Only] The type of operation, such as `insert`, `update`, or `delete`, and so on.
  "progress": 42, # [Output Only] An optional progress indicator that ranges from 0 to 100. There is no requirement that this be linear or support any granularity of operations. This should not be used to guess when the operation will be complete. This number should monotonically increase as the operation progresses.
  "region": "A String", # [Output Only] The URL of the region where the operation resides. Only applicable when performing regional operations.
  "selfLink": "A String", # [Output Only] Server-defined URL for the resource.
  "selfLinkWithId": "A String", # [Output Only] Server-defined URL for this resource with the resource id.
  "setCommonInstanceMetadataOperationMetadata": { # [Output Only] If the operation is for projects.setCommonInstanceMetadata, this field will contain information on all underlying zonal actions and their state.
    "clientOperationId": "A String", # [Output Only] The client operation id.
    "perLocationOperations": { # [Output Only] Status information per location (location name is key). Example key: zones/us-central1-a
      "a_key": {
        "error": { # The `Status` type defines a logical error model that is suitable for different programming environments, including REST APIs and RPC APIs. It is used by [gRPC](https://github.com/grpc). Each `Status` message contains three pieces of data: error code, error message, and error details. You can find out more about this error model and how to work with it in the [API Design Guide](https://cloud.google.com/apis/design/errors). # [Output Only] If state is `ABANDONED` or `FAILED`, this field is populated.
          "code": 42, # The status code, which should be an enum value of google.rpc.Code.
          "details": [ # A list of messages that carry the error details. There is a common set of message types for APIs to use.
            {
              "a_key": "", # Properties of the object. Contains field @type with type URL.
            },
          ],
          "message": "A String", # A developer-facing error message, which should be in English. Any user-facing error message should be localized and sent in the google.rpc.Status.details field, or localized by the client.
        },
        "state": "A String", # [Output Only] Status of the action, which can be one of the following: `PROPAGATING`, `PROPAGATED`, `ABANDONED`, `FAILED`, or `DONE`.
      },
    },
  },
  "startTime": "A String", # [Output Only] The time that this operation was started by the server. This value is in RFC3339 text format.
  "status": "A String", # [Output Only] The status of the operation, which can be one of the following: `PENDING`, `RUNNING`, or `DONE`.
  "statusMessage": "A String", # [Output Only] An optional textual description of the current status of the operation.
  "targetId": "A String", # [Output Only] The unique target ID, which identifies a specific incarnation of the target resource.
  "targetLink": "A String", # [Output Only] The URL of the resource that the operation modifies. For operations related to creating a snapshot, this points to the persistent disk that the snapshot was created from.
  "user": "A String", # [Output Only] User who requested the operation, for example: `user@example.com` or `alice_smith_identifier (global/workforcePools/example-com-us-employees)`.
  "warnings": [ # [Output Only] If warning messages are generated during processing of the operation, this field will be populated.
    {
      "code": "A String", # [Output Only] A warning code, if applicable. For example, Compute Engine returns NO_RESULTS_ON_PAGE if there are no results in the response.
      "data": [ # [Output Only] Metadata about this warning in key: value format. For example: "data": [ { "key": "scope", "value": "zones/us-east1-d" }
        {
          "key": "A String", # [Output Only] A key that provides more detail on the warning being returned. For example, for warnings where there are no results in a list request for a particular zone, this key might be scope and the key value might be the zone name. Other examples might be a key indicating a deprecated resource and a suggested replacement, or a warning about invalid network settings (for example, if an instance attempts to perform IP forwarding but is not enabled for IP forwarding).
          "value": "A String", # [Output Only] A warning data value corresponding to the key.
        },
      ],
      "message": "A String", # [Output Only] A human-readable description of the warning code.
    },
  ],
  "zone": "A String", # [Output Only] The URL of the zone where the operation resides. Only applicable when performing per-zone operations.
}
enableXpnResource(project, body=None, requestId=None, x__xgafv=None)
Enable service resource (a.k.a service project) for a host project, so that subnets in the host project can be used by instances in the service project.

Args:
  project: string, Project ID for this request. (required)
  body: object, The request body.
    The object takes the form of:

{
  "xpnResource": { # Service resource (a.k.a service project) ID. # Service resource (a.k.a service project) ID.
    "id": "A String", # The ID of the service resource. In the case of projects, this field supports project id (e.g., my-project-123) and project number (e.g. 12345678).
    "type": "A String", # The type of the service resource.
  },
}

  requestId: string, An optional request ID to identify requests. Specify a unique request ID so that if you must retry your request, the server will know to ignore the request if it has already been completed. For example, consider a situation where you make an initial request and the request times out. If you make the request again with the same request ID, the server can check if original operation with the same request ID was received, and if so, will ignore the second request. This prevents clients from accidentally creating duplicate commitments. The request ID must be a valid UUID with the exception that zero UUID is not supported ( 00000000-0000-0000-0000-000000000000).
  x__xgafv: string, V1 error format.
    Allowed values
      1 - v1 error format
      2 - v2 error format

Returns:
  An object of the form:

    { # Represents an Operation resource. Google Compute Engine has three Operation resources: * [Global](/compute/docs/reference/rest/alpha/globalOperations) * [Regional](/compute/docs/reference/rest/alpha/regionOperations) * [Zonal](/compute/docs/reference/rest/alpha/zoneOperations) You can use an operation resource to manage asynchronous API requests. For more information, read Handling API responses. Operations can be global, regional or zonal. - For global operations, use the `globalOperations` resource. - For regional operations, use the `regionOperations` resource. - For zonal operations, use the `zoneOperations` resource. For more information, read Global, Regional, and Zonal Resources. Note that completed Operation resources have a limited retention period.
  "clientOperationId": "A String", # [Output Only] The value of `requestId` if you provided it in the request. Not present otherwise.
  "creationTimestamp": "A String", # [Deprecated] This field is deprecated.
  "description": "A String", # [Output Only] A textual description of the operation, which is set when the operation is created.
  "endTime": "A String", # [Output Only] The time that this operation was completed. This value is in RFC3339 text format.
  "error": { # [Output Only] If errors are generated during processing of the operation, this field will be populated.
    "errors": [ # [Output Only] The array of errors encountered while processing this operation.
      {
        "code": "A String", # [Output Only] The error type identifier for this error.
        "errorDetails": [ # [Output Only] An optional list of messages that contain the error details. There is a set of defined message types to use for providing details.The syntax depends on the error code. For example, QuotaExceededInfo will have details when the error code is QUOTA_EXCEEDED.
          {
            "errorInfo": { # Describes the cause of the error with structured details. Example of an error when contacting the "pubsub.googleapis.com" API when it is not enabled: { "reason": "API_DISABLED" "domain": "googleapis.com" "metadata": { "resource": "projects/123", "service": "pubsub.googleapis.com" } } This response indicates that the pubsub.googleapis.com API is not enabled. Example of an error that is returned when attempting to create a Spanner instance in a region that is out of stock: { "reason": "STOCKOUT" "domain": "spanner.googleapis.com", "metadata": { "availableRegions": "us-central1,us-east2" } }
              "domain": "A String", # The logical grouping to which the "reason" belongs. The error domain is typically the registered service name of the tool or product that generates the error. Example: "pubsub.googleapis.com". If the error is generated by some common infrastructure, the error domain must be a globally unique value that identifies the infrastructure. For Google API infrastructure, the error domain is "googleapis.com".
              "metadatas": { # Additional structured details about this error. Keys should match /[a-zA-Z0-9-_]/ and be limited to 64 characters in length. When identifying the current value of an exceeded limit, the units should be contained in the key, not the value. For example, rather than {"instanceLimit": "100/request"}, should be returned as, {"instanceLimitPerRequest": "100"}, if the client exceeds the number of instances that can be created in a single (batch) request.
                "a_key": "A String",
              },
              "reason": "A String", # The reason of the error. This is a constant value that identifies the proximate cause of the error. Error reasons are unique within a particular domain of errors. This should be at most 63 characters and match a regular expression of `A-Z+[A-Z0-9]`, which represents UPPER_SNAKE_CASE.
            },
            "help": { # Provides links to documentation or for performing an out of band action. For example, if a quota check failed with an error indicating the calling project hasn't enabled the accessed service, this can contain a URL pointing directly to the right place in the developer console to flip the bit.
              "links": [ # URL(s) pointing to additional information on handling the current error.
                { # Describes a URL link.
                  "description": "A String", # Describes what the link offers.
                  "url": "A String", # The URL of the link.
                },
              ],
            },
            "localizedMessage": { # Provides a localized error message that is safe to return to the user which can be attached to an RPC error.
              "locale": "A String", # The locale used following the specification defined at https://www.rfc-editor.org/rfc/bcp/bcp47.txt. Examples are: "en-US", "fr-CH", "es-MX"
              "message": "A String", # The localized error message in the above locale.
            },
            "quotaInfo": { # Additional details for quota exceeded error for resource quota.
              "dimensions": { # The map holding related quota dimensions.
                "a_key": "A String",
              },
              "futureLimit": 3.14, # Future quota limit being rolled out. The limit's unit depends on the quota type or metric.
              "limit": 3.14, # Current effective quota limit. The limit's unit depends on the quota type or metric.
              "limitName": "A String", # The name of the quota limit.
              "metricName": "A String", # The Compute Engine quota metric name.
              "rolloutStatus": "A String", # Rollout status of the future quota limit.
            },
          },
        ],
        "location": "A String", # [Output Only] Indicates the field in the request that caused the error. This property is optional.
        "message": "A String", # [Output Only] An optional, human-readable error message.
      },
    ],
  },
  "httpErrorMessage": "A String", # [Output Only] If the operation fails, this field contains the HTTP error message that was returned, such as `NOT FOUND`.
  "httpErrorStatusCode": 42, # [Output Only] If the operation fails, this field contains the HTTP error status code that was returned. For example, a `404` means the resource was not found.
  "id": "A String", # [Output Only] The unique identifier for the operation. This identifier is defined by the server.
  "insertTime": "A String", # [Output Only] The time that this operation was requested. This value is in RFC3339 text format.
  "instancesBulkInsertOperationMetadata": {
    "perLocationStatus": { # Status information per location (location name is key). Example key: zones/us-central1-a
      "a_key": {
        "createdVmCount": 42, # [Output Only] Count of VMs successfully created so far.
        "deletedVmCount": 42, # [Output Only] Count of VMs that got deleted during rollback.
        "failedToCreateVmCount": 42, # [Output Only] Count of VMs that started creating but encountered an error.
        "status": "A String", # [Output Only] Creation status of BulkInsert operation - information if the flow is rolling forward or rolling back.
        "targetVmCount": 42, # [Output Only] Count of VMs originally planned to be created.
      },
    },
  },
  "kind": "compute#operation", # [Output Only] Type of the resource. Always `compute#operation` for Operation resources.
  "name": "A String", # [Output Only] Name of the operation.
  "operationGroupId": "A String", # [Output Only] An ID that represents a group of operations, such as when a group of operations results from a `bulkInsert` API request.
  "operationType": "A String", # [Output Only] The type of operation, such as `insert`, `update`, or `delete`, and so on.
  "progress": 42, # [Output Only] An optional progress indicator that ranges from 0 to 100. There is no requirement that this be linear or support any granularity of operations. This should not be used to guess when the operation will be complete. This number should monotonically increase as the operation progresses.
  "region": "A String", # [Output Only] The URL of the region where the operation resides. Only applicable when performing regional operations.
  "selfLink": "A String", # [Output Only] Server-defined URL for the resource.
  "selfLinkWithId": "A String", # [Output Only] Server-defined URL for this resource with the resource id.
  "setCommonInstanceMetadataOperationMetadata": { # [Output Only] If the operation is for projects.setCommonInstanceMetadata, this field will contain information on all underlying zonal actions and their state.
    "clientOperationId": "A String", # [Output Only] The client operation id.
    "perLocationOperations": { # [Output Only] Status information per location (location name is key). Example key: zones/us-central1-a
      "a_key": {
        "error": { # The `Status` type defines a logical error model that is suitable for different programming environments, including REST APIs and RPC APIs. It is used by [gRPC](https://github.com/grpc). Each `Status` message contains three pieces of data: error code, error message, and error details. You can find out more about this error model and how to work with it in the [API Design Guide](https://cloud.google.com/apis/design/errors). # [Output Only] If state is `ABANDONED` or `FAILED`, this field is populated.
          "code": 42, # The status code, which should be an enum value of google.rpc.Code.
          "details": [ # A list of messages that carry the error details. There is a common set of message types for APIs to use.
            {
              "a_key": "", # Properties of the object. Contains field @type with type URL.
            },
          ],
          "message": "A String", # A developer-facing error message, which should be in English. Any user-facing error message should be localized and sent in the google.rpc.Status.details field, or localized by the client.
        },
        "state": "A String", # [Output Only] Status of the action, which can be one of the following: `PROPAGATING`, `PROPAGATED`, `ABANDONED`, `FAILED`, or `DONE`.
      },
    },
  },
  "startTime": "A String", # [Output Only] The time that this operation was started by the server. This value is in RFC3339 text format.
  "status": "A String", # [Output Only] The status of the operation, which can be one of the following: `PENDING`, `RUNNING`, or `DONE`.
  "statusMessage": "A String", # [Output Only] An optional textual description of the current status of the operation.
  "targetId": "A String", # [Output Only] The unique target ID, which identifies a specific incarnation of the target resource.
  "targetLink": "A String", # [Output Only] The URL of the resource that the operation modifies. For operations related to creating a snapshot, this points to the persistent disk that the snapshot was created from.
  "user": "A String", # [Output Only] User who requested the operation, for example: `user@example.com` or `alice_smith_identifier (global/workforcePools/example-com-us-employees)`.
  "warnings": [ # [Output Only] If warning messages are generated during processing of the operation, this field will be populated.
    {
      "code": "A String", # [Output Only] A warning code, if applicable. For example, Compute Engine returns NO_RESULTS_ON_PAGE if there are no results in the response.
      "data": [ # [Output Only] Metadata about this warning in key: value format. For example: "data": [ { "key": "scope", "value": "zones/us-east1-d" }
        {
          "key": "A String", # [Output Only] A key that provides more detail on the warning being returned. For example, for warnings where there are no results in a list request for a particular zone, this key might be scope and the key value might be the zone name. Other examples might be a key indicating a deprecated resource and a suggested replacement, or a warning about invalid network settings (for example, if an instance attempts to perform IP forwarding but is not enabled for IP forwarding).
          "value": "A String", # [Output Only] A warning data value corresponding to the key.
        },
      ],
      "message": "A String", # [Output Only] A human-readable description of the warning code.
    },
  ],
  "zone": "A String", # [Output Only] The URL of the zone where the operation resides. Only applicable when performing per-zone operations.
}
get(project, x__xgafv=None)
Returns the specified Project resource. To decrease latency for this method, you can optionally omit any unneeded information from the response by using a field mask. This practice is especially recommended for unused quota information (the `quotas` field). To exclude one or more fields, set your request's `fields` query parameter to only include the fields you need. For example, to only include the `id` and `selfLink` fields, add the query parameter `?fields=id,selfLink` to your request.

Args:
  project: string, Project ID for this request. (required)
  x__xgafv: string, V1 error format.
    Allowed values
      1 - v1 error format
      2 - v2 error format

Returns:
  An object of the form:

    { # Represents a Project resource. A project is used to organize resources in a Google Cloud Platform environment. For more information, read about the Resource Hierarchy.
  "cloudArmorTier": "A String", # [Output Only] The Cloud Armor tier for this project. It can be one of the following values: CA_STANDARD, CA_ENTERPRISE_PAYGO. If this field is not specified, it is assumed to be CA_STANDARD.
  "commonInstanceMetadata": { # A metadata key/value entry. # Metadata key/value pairs available to all instances contained in this project. See Custom metadata for more information.
    "fingerprint": "A String", # Specifies a fingerprint for this request, which is essentially a hash of the metadata's contents and used for optimistic locking. The fingerprint is initially generated by Compute Engine and changes after every request to modify or update metadata. You must always provide an up-to-date fingerprint hash in order to update or change metadata, otherwise the request will fail with error 412 conditionNotMet. To see the latest fingerprint, make a get() request to retrieve the resource.
    "items": [ # Array of key/value pairs. The total size of all keys and values must be less than 512 KB.
      { # Metadata
        "key": "A String", # Key for the metadata entry. Keys must conform to the following regexp: [a-zA-Z0-9-_]+, and be less than 128 bytes in length. This is reflected as part of a URL in the metadata server. Additionally, to avoid ambiguity, keys must not conflict with any other metadata keys for the project.
        "value": "A String", # Value for the metadata entry. These are free-form strings, and only have meaning as interpreted by the image running in the instance. The only restriction placed on values is that their size must be less than or equal to 262144 bytes (256 KiB).
      },
    ],
    "kind": "compute#metadata", # [Output Only] Type of the resource. Always compute#metadata for metadata.
  },
  "creationTimestamp": "A String", # [Output Only] Creation timestamp in RFC3339 text format.
  "defaultNetworkTier": "A String", # This signifies the default network tier used for configuring resources of the project and can only take the following values: PREMIUM, STANDARD. Initially the default network tier is PREMIUM.
  "defaultServiceAccount": "A String", # [Output Only] Default service account used by VMs running in this project.
  "description": "A String", # An optional textual description of the resource.
  "enabledFeatures": [ # Restricted features enabled for use on this project.
    "A String",
  ],
  "id": "A String", # [Output Only] The unique identifier for the resource. This identifier is defined by the server. This is *not* the project ID, and is just a unique ID used by Compute Engine to identify resources.
  "kind": "compute#project", # [Output Only] Type of the resource. Always compute#project for projects.
  "managedProtectionTier": "A String", # [Output Only] The Cloud Armor Managed Protection (CAMP) tier for this project. It can be one of the following values: CA_STANDARD, CAMP_PLUS_PAYGO. If this field is not specified, it is assumed to be CA_STANDARD.
  "name": "A String", # The project ID. For example: my-example-project. Use the project ID to make requests to Compute Engine.
  "quotas": [ # [Output Only] Quotas assigned to this project.
    { # A quotas entry.
      "limit": 3.14, # [Output Only] Quota limit for this metric.
      "metric": "A String", # [Output Only] Name of the quota metric.
      "owner": "A String", # [Output Only] Owning resource. This is the resource on which this quota is applied.
      "usage": 3.14, # [Output Only] Current usage of this metric.
    },
  ],
  "selfLink": "A String", # [Output Only] Server-defined URL for the resource.
  "usageExportLocation": { # The location in Cloud Storage and naming method of the daily usage report. Contains bucket_name and report_name prefix. # The naming prefix for daily usage reports and the Google Cloud Storage bucket where they are stored.
    "bucketName": "A String", # The name of an existing bucket in Cloud Storage where the usage report object is stored. The Google Service Account is granted write access to this bucket. This can either be the bucket name by itself, such as example-bucket, or the bucket name with gs:// or https://storage.googleapis.com/ in front of it, such as gs://example-bucket.
    "reportNamePrefix": "A String", # An optional prefix for the name of the usage report object stored in bucketName. If not supplied, defaults to usage_gce. The report is stored as a CSV file named report_name_prefix_gce_YYYYMMDD.csv where YYYYMMDD is the day of the usage according to Pacific Time. If you supply a prefix, it should conform to Cloud Storage object naming conventions.
  },
  "vmDnsSetting": "A String", # [Output Only] Default internal DNS setting used by VMs running in this project.
  "xpnProjectStatus": "A String", # [Output Only] The role this project has in a shared VPC configuration. Currently, only projects with the host role, which is specified by the value HOST, are differentiated.
}
getXpnHost(project, x__xgafv=None)
Gets the shared VPC host project that this project links to. May be empty if no link exists.

Args:
  project: string, Project ID for this request. (required)
  x__xgafv: string, V1 error format.
    Allowed values
      1 - v1 error format
      2 - v2 error format

Returns:
  An object of the form:

    { # Represents a Project resource. A project is used to organize resources in a Google Cloud Platform environment. For more information, read about the Resource Hierarchy.
  "cloudArmorTier": "A String", # [Output Only] The Cloud Armor tier for this project. It can be one of the following values: CA_STANDARD, CA_ENTERPRISE_PAYGO. If this field is not specified, it is assumed to be CA_STANDARD.
  "commonInstanceMetadata": { # A metadata key/value entry. # Metadata key/value pairs available to all instances contained in this project. See Custom metadata for more information.
    "fingerprint": "A String", # Specifies a fingerprint for this request, which is essentially a hash of the metadata's contents and used for optimistic locking. The fingerprint is initially generated by Compute Engine and changes after every request to modify or update metadata. You must always provide an up-to-date fingerprint hash in order to update or change metadata, otherwise the request will fail with error 412 conditionNotMet. To see the latest fingerprint, make a get() request to retrieve the resource.
    "items": [ # Array of key/value pairs. The total size of all keys and values must be less than 512 KB.
      { # Metadata
        "key": "A String", # Key for the metadata entry. Keys must conform to the following regexp: [a-zA-Z0-9-_]+, and be less than 128 bytes in length. This is reflected as part of a URL in the metadata server. Additionally, to avoid ambiguity, keys must not conflict with any other metadata keys for the project.
        "value": "A String", # Value for the metadata entry. These are free-form strings, and only have meaning as interpreted by the image running in the instance. The only restriction placed on values is that their size must be less than or equal to 262144 bytes (256 KiB).
      },
    ],
    "kind": "compute#metadata", # [Output Only] Type of the resource. Always compute#metadata for metadata.
  },
  "creationTimestamp": "A String", # [Output Only] Creation timestamp in RFC3339 text format.
  "defaultNetworkTier": "A String", # This signifies the default network tier used for configuring resources of the project and can only take the following values: PREMIUM, STANDARD. Initially the default network tier is PREMIUM.
  "defaultServiceAccount": "A String", # [Output Only] Default service account used by VMs running in this project.
  "description": "A String", # An optional textual description of the resource.
  "enabledFeatures": [ # Restricted features enabled for use on this project.
    "A String",
  ],
  "id": "A String", # [Output Only] The unique identifier for the resource. This identifier is defined by the server. This is *not* the project ID, and is just a unique ID used by Compute Engine to identify resources.
  "kind": "compute#project", # [Output Only] Type of the resource. Always compute#project for projects.
  "managedProtectionTier": "A String", # [Output Only] The Cloud Armor Managed Protection (CAMP) tier for this project. It can be one of the following values: CA_STANDARD, CAMP_PLUS_PAYGO. If this field is not specified, it is assumed to be CA_STANDARD.
  "name": "A String", # The project ID. For example: my-example-project. Use the project ID to make requests to Compute Engine.
  "quotas": [ # [Output Only] Quotas assigned to this project.
    { # A quotas entry.
      "limit": 3.14, # [Output Only] Quota limit for this metric.
      "metric": "A String", # [Output Only] Name of the quota metric.
      "owner": "A String", # [Output Only] Owning resource. This is the resource on which this quota is applied.
      "usage": 3.14, # [Output Only] Current usage of this metric.
    },
  ],
  "selfLink": "A String", # [Output Only] Server-defined URL for the resource.
  "usageExportLocation": { # The location in Cloud Storage and naming method of the daily usage report. Contains bucket_name and report_name prefix. # The naming prefix for daily usage reports and the Google Cloud Storage bucket where they are stored.
    "bucketName": "A String", # The name of an existing bucket in Cloud Storage where the usage report object is stored. The Google Service Account is granted write access to this bucket. This can either be the bucket name by itself, such as example-bucket, or the bucket name with gs:// or https://storage.googleapis.com/ in front of it, such as gs://example-bucket.
    "reportNamePrefix": "A String", # An optional prefix for the name of the usage report object stored in bucketName. If not supplied, defaults to usage_gce. The report is stored as a CSV file named report_name_prefix_gce_YYYYMMDD.csv where YYYYMMDD is the day of the usage according to Pacific Time. If you supply a prefix, it should conform to Cloud Storage object naming conventions.
  },
  "vmDnsSetting": "A String", # [Output Only] Default internal DNS setting used by VMs running in this project.
  "xpnProjectStatus": "A String", # [Output Only] The role this project has in a shared VPC configuration. Currently, only projects with the host role, which is specified by the value HOST, are differentiated.
}
getXpnResources(project, filter=None, maxResults=None, orderBy=None, pageToken=None, returnPartialSuccess=None, x__xgafv=None)
Gets service resources (a.k.a service project) associated with this host project.

Args:
  project: string, Project ID for this request. (required)
  filter: string, A filter expression that filters resources listed in the response. Most Compute resources support two types of filter expressions: expressions that support regular expressions and expressions that follow API improvement proposal AIP-160. These two types of filter expressions cannot be mixed in one request. If you want to use AIP-160, your expression must specify the field name, an operator, and the value that you want to use for filtering. The value must be a string, a number, or a boolean. The operator must be either `=`, `!=`, `>`, `<`, `<=`, `>=` or `:`. For example, if you are filtering Compute Engine instances, you can exclude instances named `example-instance` by specifying `name != example-instance`. The `:*` comparison can be used to test whether a key has been defined. For example, to find all objects with `owner` label use: ``` labels.owner:* ``` You can also filter nested fields. For example, you could specify `scheduling.automaticRestart = false` to include instances only if they are not scheduled for automatic restarts. You can use filtering on nested fields to filter based on resource labels. To filter on multiple expressions, provide each separate expression within parentheses. For example: ``` (scheduling.automaticRestart = true) (cpuPlatform = "Intel Skylake") ``` By default, each expression is an `AND` expression. However, you can include `AND` and `OR` expressions explicitly. For example: ``` (cpuPlatform = "Intel Skylake") OR (cpuPlatform = "Intel Broadwell") AND (scheduling.automaticRestart = true) ``` If you want to use a regular expression, use the `eq` (equal) or `ne` (not equal) operator against a single un-parenthesized expression with or without quotes or against multiple parenthesized expressions. Examples: `fieldname eq unquoted literal` `fieldname eq 'single quoted literal'` `fieldname eq "double quoted literal"` `(fieldname1 eq literal) (fieldname2 ne "literal")` The literal value is interpreted as a regular expression using Google RE2 library syntax. The literal value must match the entire field. For example, to filter for instances that do not end with name "instance", you would use `name ne .*instance`. You cannot combine constraints on multiple fields using regular expressions.
  maxResults: integer, The maximum number of results per page that should be returned. If the number of available results is larger than `maxResults`, Compute Engine returns a `nextPageToken` that can be used to get the next page of results in subsequent list requests. Acceptable values are `0` to `500`, inclusive. (Default: `500`)
  orderBy: string, Sorts list results by a certain order. By default, results are returned in alphanumerical order based on the resource name. You can also sort results in descending order based on the creation timestamp using `orderBy="creationTimestamp desc"`. This sorts results based on the `creationTimestamp` field in reverse chronological order (newest result first). Use this to sort resources like operations so that the newest operation is returned first. Currently, only sorting by `name` or `creationTimestamp desc` is supported.
  pageToken: string, Specifies a page token to use. Set `pageToken` to the `nextPageToken` returned by a previous list request to get the next page of results.
  returnPartialSuccess: boolean, Opt-in for partial success behavior which provides partial results in case of failure. The default value is false. For example, when partial success behavior is enabled, aggregatedList for a single zone scope either returns all resources in the zone or no resources, with an error code.
  x__xgafv: string, V1 error format.
    Allowed values
      1 - v1 error format
      2 - v2 error format

Returns:
  An object of the form:

    {
  "kind": "compute#projectsGetXpnResources", # [Output Only] Type of resource. Always compute#projectsGetXpnResources for lists of service resources (a.k.a service projects)
  "nextPageToken": "A String", # [Output Only] This token allows you to get the next page of results for list requests. If the number of results is larger than maxResults, use the nextPageToken as a value for the query parameter pageToken in the next list request. Subsequent list requests will have their own nextPageToken to continue paging through the results.
  "resources": [ # Service resources (a.k.a service projects) attached to this project as their shared VPC host.
    { # Service resource (a.k.a service project) ID.
      "id": "A String", # The ID of the service resource. In the case of projects, this field supports project id (e.g., my-project-123) and project number (e.g. 12345678).
      "type": "A String", # The type of the service resource.
    },
  ],
}
getXpnResources_next()
Retrieves the next page of results.

        Args:
          previous_request: The request for the previous page. (required)
          previous_response: The response from the request for the previous page. (required)

        Returns:
          A request object that you can call 'execute()' on to request the next
          page. Returns None if there are no more items in the collection.
        
listXpnHosts(project, body=None, filter=None, maxResults=None, orderBy=None, pageToken=None, returnPartialSuccess=None, x__xgafv=None)
Lists all shared VPC host projects visible to the user in an organization.

Args:
  project: string, Project ID for this request. (required)
  body: object, The request body.
    The object takes the form of:

{
  "organization": "A String", # Optional organization ID managed by Cloud Resource Manager, for which to list shared VPC host projects. If not specified, the organization will be inferred from the project.
  "returnPartialPage": True or False, # Opt-in for partial page behavior which provides a partial filled page (number of items on which may be smaller than maxResults) within the API deadline. If opt-in, then the user should rely on if nextPageToken is empty in the response to determine if there is a next page. Empty page is also valid and possible. The default value is false.
}

  filter: string, A filter expression that filters resources listed in the response. Most Compute resources support two types of filter expressions: expressions that support regular expressions and expressions that follow API improvement proposal AIP-160. These two types of filter expressions cannot be mixed in one request. If you want to use AIP-160, your expression must specify the field name, an operator, and the value that you want to use for filtering. The value must be a string, a number, or a boolean. The operator must be either `=`, `!=`, `>`, `<`, `<=`, `>=` or `:`. For example, if you are filtering Compute Engine instances, you can exclude instances named `example-instance` by specifying `name != example-instance`. The `:*` comparison can be used to test whether a key has been defined. For example, to find all objects with `owner` label use: ``` labels.owner:* ``` You can also filter nested fields. For example, you could specify `scheduling.automaticRestart = false` to include instances only if they are not scheduled for automatic restarts. You can use filtering on nested fields to filter based on resource labels. To filter on multiple expressions, provide each separate expression within parentheses. For example: ``` (scheduling.automaticRestart = true) (cpuPlatform = "Intel Skylake") ``` By default, each expression is an `AND` expression. However, you can include `AND` and `OR` expressions explicitly. For example: ``` (cpuPlatform = "Intel Skylake") OR (cpuPlatform = "Intel Broadwell") AND (scheduling.automaticRestart = true) ``` If you want to use a regular expression, use the `eq` (equal) or `ne` (not equal) operator against a single un-parenthesized expression with or without quotes or against multiple parenthesized expressions. Examples: `fieldname eq unquoted literal` `fieldname eq 'single quoted literal'` `fieldname eq "double quoted literal"` `(fieldname1 eq literal) (fieldname2 ne "literal")` The literal value is interpreted as a regular expression using Google RE2 library syntax. The literal value must match the entire field. For example, to filter for instances that do not end with name "instance", you would use `name ne .*instance`. You cannot combine constraints on multiple fields using regular expressions.
  maxResults: integer, The maximum number of results per page that should be returned. If the number of available results is larger than `maxResults`, Compute Engine returns a `nextPageToken` that can be used to get the next page of results in subsequent list requests. Acceptable values are `0` to `500`, inclusive. (Default: `500`)
  orderBy: string, Sorts list results by a certain order. By default, results are returned in alphanumerical order based on the resource name. You can also sort results in descending order based on the creation timestamp using `orderBy="creationTimestamp desc"`. This sorts results based on the `creationTimestamp` field in reverse chronological order (newest result first). Use this to sort resources like operations so that the newest operation is returned first. Currently, only sorting by `name` or `creationTimestamp desc` is supported.
  pageToken: string, Specifies a page token to use. Set `pageToken` to the `nextPageToken` returned by a previous list request to get the next page of results.
  returnPartialSuccess: boolean, Opt-in for partial success behavior which provides partial results in case of failure. The default value is false. For example, when partial success behavior is enabled, aggregatedList for a single zone scope either returns all resources in the zone or no resources, with an error code.
  x__xgafv: string, V1 error format.
    Allowed values
      1 - v1 error format
      2 - v2 error format

Returns:
  An object of the form:

    {
  "id": "A String", # [Output Only] Unique identifier for the resource; defined by the server.
  "items": [ # [Output Only] A list of shared VPC host project URLs.
    { # Represents a Project resource. A project is used to organize resources in a Google Cloud Platform environment. For more information, read about the Resource Hierarchy.
      "cloudArmorTier": "A String", # [Output Only] The Cloud Armor tier for this project. It can be one of the following values: CA_STANDARD, CA_ENTERPRISE_PAYGO. If this field is not specified, it is assumed to be CA_STANDARD.
      "commonInstanceMetadata": { # A metadata key/value entry. # Metadata key/value pairs available to all instances contained in this project. See Custom metadata for more information.
        "fingerprint": "A String", # Specifies a fingerprint for this request, which is essentially a hash of the metadata's contents and used for optimistic locking. The fingerprint is initially generated by Compute Engine and changes after every request to modify or update metadata. You must always provide an up-to-date fingerprint hash in order to update or change metadata, otherwise the request will fail with error 412 conditionNotMet. To see the latest fingerprint, make a get() request to retrieve the resource.
        "items": [ # Array of key/value pairs. The total size of all keys and values must be less than 512 KB.
          { # Metadata
            "key": "A String", # Key for the metadata entry. Keys must conform to the following regexp: [a-zA-Z0-9-_]+, and be less than 128 bytes in length. This is reflected as part of a URL in the metadata server. Additionally, to avoid ambiguity, keys must not conflict with any other metadata keys for the project.
            "value": "A String", # Value for the metadata entry. These are free-form strings, and only have meaning as interpreted by the image running in the instance. The only restriction placed on values is that their size must be less than or equal to 262144 bytes (256 KiB).
          },
        ],
        "kind": "compute#metadata", # [Output Only] Type of the resource. Always compute#metadata for metadata.
      },
      "creationTimestamp": "A String", # [Output Only] Creation timestamp in RFC3339 text format.
      "defaultNetworkTier": "A String", # This signifies the default network tier used for configuring resources of the project and can only take the following values: PREMIUM, STANDARD. Initially the default network tier is PREMIUM.
      "defaultServiceAccount": "A String", # [Output Only] Default service account used by VMs running in this project.
      "description": "A String", # An optional textual description of the resource.
      "enabledFeatures": [ # Restricted features enabled for use on this project.
        "A String",
      ],
      "id": "A String", # [Output Only] The unique identifier for the resource. This identifier is defined by the server. This is *not* the project ID, and is just a unique ID used by Compute Engine to identify resources.
      "kind": "compute#project", # [Output Only] Type of the resource. Always compute#project for projects.
      "managedProtectionTier": "A String", # [Output Only] The Cloud Armor Managed Protection (CAMP) tier for this project. It can be one of the following values: CA_STANDARD, CAMP_PLUS_PAYGO. If this field is not specified, it is assumed to be CA_STANDARD.
      "name": "A String", # The project ID. For example: my-example-project. Use the project ID to make requests to Compute Engine.
      "quotas": [ # [Output Only] Quotas assigned to this project.
        { # A quotas entry.
          "limit": 3.14, # [Output Only] Quota limit for this metric.
          "metric": "A String", # [Output Only] Name of the quota metric.
          "owner": "A String", # [Output Only] Owning resource. This is the resource on which this quota is applied.
          "usage": 3.14, # [Output Only] Current usage of this metric.
        },
      ],
      "selfLink": "A String", # [Output Only] Server-defined URL for the resource.
      "usageExportLocation": { # The location in Cloud Storage and naming method of the daily usage report. Contains bucket_name and report_name prefix. # The naming prefix for daily usage reports and the Google Cloud Storage bucket where they are stored.
        "bucketName": "A String", # The name of an existing bucket in Cloud Storage where the usage report object is stored. The Google Service Account is granted write access to this bucket. This can either be the bucket name by itself, such as example-bucket, or the bucket name with gs:// or https://storage.googleapis.com/ in front of it, such as gs://example-bucket.
        "reportNamePrefix": "A String", # An optional prefix for the name of the usage report object stored in bucketName. If not supplied, defaults to usage_gce. The report is stored as a CSV file named report_name_prefix_gce_YYYYMMDD.csv where YYYYMMDD is the day of the usage according to Pacific Time. If you supply a prefix, it should conform to Cloud Storage object naming conventions.
      },
      "vmDnsSetting": "A String", # [Output Only] Default internal DNS setting used by VMs running in this project.
      "xpnProjectStatus": "A String", # [Output Only] The role this project has in a shared VPC configuration. Currently, only projects with the host role, which is specified by the value HOST, are differentiated.
    },
  ],
  "kind": "compute#xpnHostList", # [Output Only] Type of resource. Always compute#xpnHostList for lists of shared VPC hosts.
  "nextPageToken": "A String", # [Output Only] This token allows you to get the next page of results for list requests. If the number of results is larger than maxResults, use the nextPageToken as a value for the query parameter pageToken in the next list request. Subsequent list requests will have their own nextPageToken to continue paging through the results.
  "selfLink": "A String", # [Output Only] Server-defined URL for this resource.
  "warning": { # [Output Only] Informational warning message.
    "code": "A String", # [Output Only] A warning code, if applicable. For example, Compute Engine returns NO_RESULTS_ON_PAGE if there are no results in the response.
    "data": [ # [Output Only] Metadata about this warning in key: value format. For example: "data": [ { "key": "scope", "value": "zones/us-east1-d" }
      {
        "key": "A String", # [Output Only] A key that provides more detail on the warning being returned. For example, for warnings where there are no results in a list request for a particular zone, this key might be scope and the key value might be the zone name. Other examples might be a key indicating a deprecated resource and a suggested replacement, or a warning about invalid network settings (for example, if an instance attempts to perform IP forwarding but is not enabled for IP forwarding).
        "value": "A String", # [Output Only] A warning data value corresponding to the key.
      },
    ],
    "message": "A String", # [Output Only] A human-readable description of the warning code.
  },
}
listXpnHosts_next()
Retrieves the next page of results.

        Args:
          previous_request: The request for the previous page. (required)
          previous_response: The response from the request for the previous page. (required)

        Returns:
          A request object that you can call 'execute()' on to request the next
          page. Returns None if there are no more items in the collection.
        
moveDisk(project, body=None, requestId=None, x__xgafv=None)
Moves a persistent disk from one zone to another.

Args:
  project: string, Project ID for this request. (required)
  body: object, The request body.
    The object takes the form of:

{
  "destinationZone": "A String", # The URL of the destination zone to move the disk. This can be a full or partial URL. For example, the following are all valid URLs to a zone: - https://www.googleapis.com/compute/v1/projects/project/zones/zone - projects/project/zones/zone - zones/zone
  "targetDisk": "A String", # The URL of the target disk to move. This can be a full or partial URL. For example, the following are all valid URLs to a disk: - https://www.googleapis.com/compute/v1/projects/project/zones/zone /disks/disk - projects/project/zones/zone/disks/disk - zones/zone/disks/disk
}

  requestId: string, An optional request ID to identify requests. Specify a unique request ID so that if you must retry your request, the server will know to ignore the request if it has already been completed. For example, consider a situation where you make an initial request and the request times out. If you make the request again with the same request ID, the server can check if original operation with the same request ID was received, and if so, will ignore the second request. This prevents clients from accidentally creating duplicate commitments. The request ID must be a valid UUID with the exception that zero UUID is not supported ( 00000000-0000-0000-0000-000000000000).
  x__xgafv: string, V1 error format.
    Allowed values
      1 - v1 error format
      2 - v2 error format

Returns:
  An object of the form:

    { # Represents an Operation resource. Google Compute Engine has three Operation resources: * [Global](/compute/docs/reference/rest/alpha/globalOperations) * [Regional](/compute/docs/reference/rest/alpha/regionOperations) * [Zonal](/compute/docs/reference/rest/alpha/zoneOperations) You can use an operation resource to manage asynchronous API requests. For more information, read Handling API responses. Operations can be global, regional or zonal. - For global operations, use the `globalOperations` resource. - For regional operations, use the `regionOperations` resource. - For zonal operations, use the `zoneOperations` resource. For more information, read Global, Regional, and Zonal Resources. Note that completed Operation resources have a limited retention period.
  "clientOperationId": "A String", # [Output Only] The value of `requestId` if you provided it in the request. Not present otherwise.
  "creationTimestamp": "A String", # [Deprecated] This field is deprecated.
  "description": "A String", # [Output Only] A textual description of the operation, which is set when the operation is created.
  "endTime": "A String", # [Output Only] The time that this operation was completed. This value is in RFC3339 text format.
  "error": { # [Output Only] If errors are generated during processing of the operation, this field will be populated.
    "errors": [ # [Output Only] The array of errors encountered while processing this operation.
      {
        "code": "A String", # [Output Only] The error type identifier for this error.
        "errorDetails": [ # [Output Only] An optional list of messages that contain the error details. There is a set of defined message types to use for providing details.The syntax depends on the error code. For example, QuotaExceededInfo will have details when the error code is QUOTA_EXCEEDED.
          {
            "errorInfo": { # Describes the cause of the error with structured details. Example of an error when contacting the "pubsub.googleapis.com" API when it is not enabled: { "reason": "API_DISABLED" "domain": "googleapis.com" "metadata": { "resource": "projects/123", "service": "pubsub.googleapis.com" } } This response indicates that the pubsub.googleapis.com API is not enabled. Example of an error that is returned when attempting to create a Spanner instance in a region that is out of stock: { "reason": "STOCKOUT" "domain": "spanner.googleapis.com", "metadata": { "availableRegions": "us-central1,us-east2" } }
              "domain": "A String", # The logical grouping to which the "reason" belongs. The error domain is typically the registered service name of the tool or product that generates the error. Example: "pubsub.googleapis.com". If the error is generated by some common infrastructure, the error domain must be a globally unique value that identifies the infrastructure. For Google API infrastructure, the error domain is "googleapis.com".
              "metadatas": { # Additional structured details about this error. Keys should match /[a-zA-Z0-9-_]/ and be limited to 64 characters in length. When identifying the current value of an exceeded limit, the units should be contained in the key, not the value. For example, rather than {"instanceLimit": "100/request"}, should be returned as, {"instanceLimitPerRequest": "100"}, if the client exceeds the number of instances that can be created in a single (batch) request.
                "a_key": "A String",
              },
              "reason": "A String", # The reason of the error. This is a constant value that identifies the proximate cause of the error. Error reasons are unique within a particular domain of errors. This should be at most 63 characters and match a regular expression of `A-Z+[A-Z0-9]`, which represents UPPER_SNAKE_CASE.
            },
            "help": { # Provides links to documentation or for performing an out of band action. For example, if a quota check failed with an error indicating the calling project hasn't enabled the accessed service, this can contain a URL pointing directly to the right place in the developer console to flip the bit.
              "links": [ # URL(s) pointing to additional information on handling the current error.
                { # Describes a URL link.
                  "description": "A String", # Describes what the link offers.
                  "url": "A String", # The URL of the link.
                },
              ],
            },
            "localizedMessage": { # Provides a localized error message that is safe to return to the user which can be attached to an RPC error.
              "locale": "A String", # The locale used following the specification defined at https://www.rfc-editor.org/rfc/bcp/bcp47.txt. Examples are: "en-US", "fr-CH", "es-MX"
              "message": "A String", # The localized error message in the above locale.
            },
            "quotaInfo": { # Additional details for quota exceeded error for resource quota.
              "dimensions": { # The map holding related quota dimensions.
                "a_key": "A String",
              },
              "futureLimit": 3.14, # Future quota limit being rolled out. The limit's unit depends on the quota type or metric.
              "limit": 3.14, # Current effective quota limit. The limit's unit depends on the quota type or metric.
              "limitName": "A String", # The name of the quota limit.
              "metricName": "A String", # The Compute Engine quota metric name.
              "rolloutStatus": "A String", # Rollout status of the future quota limit.
            },
          },
        ],
        "location": "A String", # [Output Only] Indicates the field in the request that caused the error. This property is optional.
        "message": "A String", # [Output Only] An optional, human-readable error message.
      },
    ],
  },
  "httpErrorMessage": "A String", # [Output Only] If the operation fails, this field contains the HTTP error message that was returned, such as `NOT FOUND`.
  "httpErrorStatusCode": 42, # [Output Only] If the operation fails, this field contains the HTTP error status code that was returned. For example, a `404` means the resource was not found.
  "id": "A String", # [Output Only] The unique identifier for the operation. This identifier is defined by the server.
  "insertTime": "A String", # [Output Only] The time that this operation was requested. This value is in RFC3339 text format.
  "instancesBulkInsertOperationMetadata": {
    "perLocationStatus": { # Status information per location (location name is key). Example key: zones/us-central1-a
      "a_key": {
        "createdVmCount": 42, # [Output Only] Count of VMs successfully created so far.
        "deletedVmCount": 42, # [Output Only] Count of VMs that got deleted during rollback.
        "failedToCreateVmCount": 42, # [Output Only] Count of VMs that started creating but encountered an error.
        "status": "A String", # [Output Only] Creation status of BulkInsert operation - information if the flow is rolling forward or rolling back.
        "targetVmCount": 42, # [Output Only] Count of VMs originally planned to be created.
      },
    },
  },
  "kind": "compute#operation", # [Output Only] Type of the resource. Always `compute#operation` for Operation resources.
  "name": "A String", # [Output Only] Name of the operation.
  "operationGroupId": "A String", # [Output Only] An ID that represents a group of operations, such as when a group of operations results from a `bulkInsert` API request.
  "operationType": "A String", # [Output Only] The type of operation, such as `insert`, `update`, or `delete`, and so on.
  "progress": 42, # [Output Only] An optional progress indicator that ranges from 0 to 100. There is no requirement that this be linear or support any granularity of operations. This should not be used to guess when the operation will be complete. This number should monotonically increase as the operation progresses.
  "region": "A String", # [Output Only] The URL of the region where the operation resides. Only applicable when performing regional operations.
  "selfLink": "A String", # [Output Only] Server-defined URL for the resource.
  "selfLinkWithId": "A String", # [Output Only] Server-defined URL for this resource with the resource id.
  "setCommonInstanceMetadataOperationMetadata": { # [Output Only] If the operation is for projects.setCommonInstanceMetadata, this field will contain information on all underlying zonal actions and their state.
    "clientOperationId": "A String", # [Output Only] The client operation id.
    "perLocationOperations": { # [Output Only] Status information per location (location name is key). Example key: zones/us-central1-a
      "a_key": {
        "error": { # The `Status` type defines a logical error model that is suitable for different programming environments, including REST APIs and RPC APIs. It is used by [gRPC](https://github.com/grpc). Each `Status` message contains three pieces of data: error code, error message, and error details. You can find out more about this error model and how to work with it in the [API Design Guide](https://cloud.google.com/apis/design/errors). # [Output Only] If state is `ABANDONED` or `FAILED`, this field is populated.
          "code": 42, # The status code, which should be an enum value of google.rpc.Code.
          "details": [ # A list of messages that carry the error details. There is a common set of message types for APIs to use.
            {
              "a_key": "", # Properties of the object. Contains field @type with type URL.
            },
          ],
          "message": "A String", # A developer-facing error message, which should be in English. Any user-facing error message should be localized and sent in the google.rpc.Status.details field, or localized by the client.
        },
        "state": "A String", # [Output Only] Status of the action, which can be one of the following: `PROPAGATING`, `PROPAGATED`, `ABANDONED`, `FAILED`, or `DONE`.
      },
    },
  },
  "startTime": "A String", # [Output Only] The time that this operation was started by the server. This value is in RFC3339 text format.
  "status": "A String", # [Output Only] The status of the operation, which can be one of the following: `PENDING`, `RUNNING`, or `DONE`.
  "statusMessage": "A String", # [Output Only] An optional textual description of the current status of the operation.
  "targetId": "A String", # [Output Only] The unique target ID, which identifies a specific incarnation of the target resource.
  "targetLink": "A String", # [Output Only] The URL of the resource that the operation modifies. For operations related to creating a snapshot, this points to the persistent disk that the snapshot was created from.
  "user": "A String", # [Output Only] User who requested the operation, for example: `user@example.com` or `alice_smith_identifier (global/workforcePools/example-com-us-employees)`.
  "warnings": [ # [Output Only] If warning messages are generated during processing of the operation, this field will be populated.
    {
      "code": "A String", # [Output Only] A warning code, if applicable. For example, Compute Engine returns NO_RESULTS_ON_PAGE if there are no results in the response.
      "data": [ # [Output Only] Metadata about this warning in key: value format. For example: "data": [ { "key": "scope", "value": "zones/us-east1-d" }
        {
          "key": "A String", # [Output Only] A key that provides more detail on the warning being returned. For example, for warnings where there are no results in a list request for a particular zone, this key might be scope and the key value might be the zone name. Other examples might be a key indicating a deprecated resource and a suggested replacement, or a warning about invalid network settings (for example, if an instance attempts to perform IP forwarding but is not enabled for IP forwarding).
          "value": "A String", # [Output Only] A warning data value corresponding to the key.
        },
      ],
      "message": "A String", # [Output Only] A human-readable description of the warning code.
    },
  ],
  "zone": "A String", # [Output Only] The URL of the zone where the operation resides. Only applicable when performing per-zone operations.
}
moveInstance(project, body=None, requestId=None, x__xgafv=None)
Moves an instance and its attached persistent disks from one zone to another. *Note*: Moving VMs or disks by using this method might cause unexpected behavior. For more information, see the [known issue](/compute/docs/troubleshooting/known-issues#moving_vms_or_disks_using_the_moveinstance_api_or_the_causes_unexpected_behavior). [Deprecated] This method is deprecated. See [moving instance across zones](/compute/docs/instances/moving-instance-across-zones) instead.

Args:
  project: string, Project ID for this request. (required)
  body: object, The request body.
    The object takes the form of:

{
  "destinationZone": "A String", # The URL of the destination zone to move the instance. This can be a full or partial URL. For example, the following are all valid URLs to a zone: - https://www.googleapis.com/compute/v1/projects/project/zones/zone - projects/project/zones/zone - zones/zone
  "targetInstance": "A String", # The URL of the target instance to move. This can be a full or partial URL. For example, the following are all valid URLs to an instance: - https://www.googleapis.com/compute/v1/projects/project/zones/zone /instances/instance - projects/project/zones/zone/instances/instance - zones/zone/instances/instance
}

  requestId: string, An optional request ID to identify requests. Specify a unique request ID so that if you must retry your request, the server will know to ignore the request if it has already been completed. For example, consider a situation where you make an initial request and the request times out. If you make the request again with the same request ID, the server can check if original operation with the same request ID was received, and if so, will ignore the second request. This prevents clients from accidentally creating duplicate commitments. The request ID must be a valid UUID with the exception that zero UUID is not supported ( 00000000-0000-0000-0000-000000000000).
  x__xgafv: string, V1 error format.
    Allowed values
      1 - v1 error format
      2 - v2 error format

Returns:
  An object of the form:

    { # Represents an Operation resource. Google Compute Engine has three Operation resources: * [Global](/compute/docs/reference/rest/alpha/globalOperations) * [Regional](/compute/docs/reference/rest/alpha/regionOperations) * [Zonal](/compute/docs/reference/rest/alpha/zoneOperations) You can use an operation resource to manage asynchronous API requests. For more information, read Handling API responses. Operations can be global, regional or zonal. - For global operations, use the `globalOperations` resource. - For regional operations, use the `regionOperations` resource. - For zonal operations, use the `zoneOperations` resource. For more information, read Global, Regional, and Zonal Resources. Note that completed Operation resources have a limited retention period.
  "clientOperationId": "A String", # [Output Only] The value of `requestId` if you provided it in the request. Not present otherwise.
  "creationTimestamp": "A String", # [Deprecated] This field is deprecated.
  "description": "A String", # [Output Only] A textual description of the operation, which is set when the operation is created.
  "endTime": "A String", # [Output Only] The time that this operation was completed. This value is in RFC3339 text format.
  "error": { # [Output Only] If errors are generated during processing of the operation, this field will be populated.
    "errors": [ # [Output Only] The array of errors encountered while processing this operation.
      {
        "code": "A String", # [Output Only] The error type identifier for this error.
        "errorDetails": [ # [Output Only] An optional list of messages that contain the error details. There is a set of defined message types to use for providing details.The syntax depends on the error code. For example, QuotaExceededInfo will have details when the error code is QUOTA_EXCEEDED.
          {
            "errorInfo": { # Describes the cause of the error with structured details. Example of an error when contacting the "pubsub.googleapis.com" API when it is not enabled: { "reason": "API_DISABLED" "domain": "googleapis.com" "metadata": { "resource": "projects/123", "service": "pubsub.googleapis.com" } } This response indicates that the pubsub.googleapis.com API is not enabled. Example of an error that is returned when attempting to create a Spanner instance in a region that is out of stock: { "reason": "STOCKOUT" "domain": "spanner.googleapis.com", "metadata": { "availableRegions": "us-central1,us-east2" } }
              "domain": "A String", # The logical grouping to which the "reason" belongs. The error domain is typically the registered service name of the tool or product that generates the error. Example: "pubsub.googleapis.com". If the error is generated by some common infrastructure, the error domain must be a globally unique value that identifies the infrastructure. For Google API infrastructure, the error domain is "googleapis.com".
              "metadatas": { # Additional structured details about this error. Keys should match /[a-zA-Z0-9-_]/ and be limited to 64 characters in length. When identifying the current value of an exceeded limit, the units should be contained in the key, not the value. For example, rather than {"instanceLimit": "100/request"}, should be returned as, {"instanceLimitPerRequest": "100"}, if the client exceeds the number of instances that can be created in a single (batch) request.
                "a_key": "A String",
              },
              "reason": "A String", # The reason of the error. This is a constant value that identifies the proximate cause of the error. Error reasons are unique within a particular domain of errors. This should be at most 63 characters and match a regular expression of `A-Z+[A-Z0-9]`, which represents UPPER_SNAKE_CASE.
            },
            "help": { # Provides links to documentation or for performing an out of band action. For example, if a quota check failed with an error indicating the calling project hasn't enabled the accessed service, this can contain a URL pointing directly to the right place in the developer console to flip the bit.
              "links": [ # URL(s) pointing to additional information on handling the current error.
                { # Describes a URL link.
                  "description": "A String", # Describes what the link offers.
                  "url": "A String", # The URL of the link.
                },
              ],
            },
            "localizedMessage": { # Provides a localized error message that is safe to return to the user which can be attached to an RPC error.
              "locale": "A String", # The locale used following the specification defined at https://www.rfc-editor.org/rfc/bcp/bcp47.txt. Examples are: "en-US", "fr-CH", "es-MX"
              "message": "A String", # The localized error message in the above locale.
            },
            "quotaInfo": { # Additional details for quota exceeded error for resource quota.
              "dimensions": { # The map holding related quota dimensions.
                "a_key": "A String",
              },
              "futureLimit": 3.14, # Future quota limit being rolled out. The limit's unit depends on the quota type or metric.
              "limit": 3.14, # Current effective quota limit. The limit's unit depends on the quota type or metric.
              "limitName": "A String", # The name of the quota limit.
              "metricName": "A String", # The Compute Engine quota metric name.
              "rolloutStatus": "A String", # Rollout status of the future quota limit.
            },
          },
        ],
        "location": "A String", # [Output Only] Indicates the field in the request that caused the error. This property is optional.
        "message": "A String", # [Output Only] An optional, human-readable error message.
      },
    ],
  },
  "httpErrorMessage": "A String", # [Output Only] If the operation fails, this field contains the HTTP error message that was returned, such as `NOT FOUND`.
  "httpErrorStatusCode": 42, # [Output Only] If the operation fails, this field contains the HTTP error status code that was returned. For example, a `404` means the resource was not found.
  "id": "A String", # [Output Only] The unique identifier for the operation. This identifier is defined by the server.
  "insertTime": "A String", # [Output Only] The time that this operation was requested. This value is in RFC3339 text format.
  "instancesBulkInsertOperationMetadata": {
    "perLocationStatus": { # Status information per location (location name is key). Example key: zones/us-central1-a
      "a_key": {
        "createdVmCount": 42, # [Output Only] Count of VMs successfully created so far.
        "deletedVmCount": 42, # [Output Only] Count of VMs that got deleted during rollback.
        "failedToCreateVmCount": 42, # [Output Only] Count of VMs that started creating but encountered an error.
        "status": "A String", # [Output Only] Creation status of BulkInsert operation - information if the flow is rolling forward or rolling back.
        "targetVmCount": 42, # [Output Only] Count of VMs originally planned to be created.
      },
    },
  },
  "kind": "compute#operation", # [Output Only] Type of the resource. Always `compute#operation` for Operation resources.
  "name": "A String", # [Output Only] Name of the operation.
  "operationGroupId": "A String", # [Output Only] An ID that represents a group of operations, such as when a group of operations results from a `bulkInsert` API request.
  "operationType": "A String", # [Output Only] The type of operation, such as `insert`, `update`, or `delete`, and so on.
  "progress": 42, # [Output Only] An optional progress indicator that ranges from 0 to 100. There is no requirement that this be linear or support any granularity of operations. This should not be used to guess when the operation will be complete. This number should monotonically increase as the operation progresses.
  "region": "A String", # [Output Only] The URL of the region where the operation resides. Only applicable when performing regional operations.
  "selfLink": "A String", # [Output Only] Server-defined URL for the resource.
  "selfLinkWithId": "A String", # [Output Only] Server-defined URL for this resource with the resource id.
  "setCommonInstanceMetadataOperationMetadata": { # [Output Only] If the operation is for projects.setCommonInstanceMetadata, this field will contain information on all underlying zonal actions and their state.
    "clientOperationId": "A String", # [Output Only] The client operation id.
    "perLocationOperations": { # [Output Only] Status information per location (location name is key). Example key: zones/us-central1-a
      "a_key": {
        "error": { # The `Status` type defines a logical error model that is suitable for different programming environments, including REST APIs and RPC APIs. It is used by [gRPC](https://github.com/grpc). Each `Status` message contains three pieces of data: error code, error message, and error details. You can find out more about this error model and how to work with it in the [API Design Guide](https://cloud.google.com/apis/design/errors). # [Output Only] If state is `ABANDONED` or `FAILED`, this field is populated.
          "code": 42, # The status code, which should be an enum value of google.rpc.Code.
          "details": [ # A list of messages that carry the error details. There is a common set of message types for APIs to use.
            {
              "a_key": "", # Properties of the object. Contains field @type with type URL.
            },
          ],
          "message": "A String", # A developer-facing error message, which should be in English. Any user-facing error message should be localized and sent in the google.rpc.Status.details field, or localized by the client.
        },
        "state": "A String", # [Output Only] Status of the action, which can be one of the following: `PROPAGATING`, `PROPAGATED`, `ABANDONED`, `FAILED`, or `DONE`.
      },
    },
  },
  "startTime": "A String", # [Output Only] The time that this operation was started by the server. This value is in RFC3339 text format.
  "status": "A String", # [Output Only] The status of the operation, which can be one of the following: `PENDING`, `RUNNING`, or `DONE`.
  "statusMessage": "A String", # [Output Only] An optional textual description of the current status of the operation.
  "targetId": "A String", # [Output Only] The unique target ID, which identifies a specific incarnation of the target resource.
  "targetLink": "A String", # [Output Only] The URL of the resource that the operation modifies. For operations related to creating a snapshot, this points to the persistent disk that the snapshot was created from.
  "user": "A String", # [Output Only] User who requested the operation, for example: `user@example.com` or `alice_smith_identifier (global/workforcePools/example-com-us-employees)`.
  "warnings": [ # [Output Only] If warning messages are generated during processing of the operation, this field will be populated.
    {
      "code": "A String", # [Output Only] A warning code, if applicable. For example, Compute Engine returns NO_RESULTS_ON_PAGE if there are no results in the response.
      "data": [ # [Output Only] Metadata about this warning in key: value format. For example: "data": [ { "key": "scope", "value": "zones/us-east1-d" }
        {
          "key": "A String", # [Output Only] A key that provides more detail on the warning being returned. For example, for warnings where there are no results in a list request for a particular zone, this key might be scope and the key value might be the zone name. Other examples might be a key indicating a deprecated resource and a suggested replacement, or a warning about invalid network settings (for example, if an instance attempts to perform IP forwarding but is not enabled for IP forwarding).
          "value": "A String", # [Output Only] A warning data value corresponding to the key.
        },
      ],
      "message": "A String", # [Output Only] A human-readable description of the warning code.
    },
  ],
  "zone": "A String", # [Output Only] The URL of the zone where the operation resides. Only applicable when performing per-zone operations.
}
setCloudArmorTier(project, body=None, requestId=None, x__xgafv=None)
Sets the Cloud Armor tier of the project. To set ENTERPRISE or above the billing account of the project must be subscribed to Cloud Armor Enterprise. See Subscribing to Cloud Armor Enterprise for more information.

Args:
  project: string, Project ID for this request. (required)
  body: object, The request body.
    The object takes the form of:

{
  "cloudArmorTier": "A String", # Managed protection tier to be set.
}

  requestId: string, An optional request ID to identify requests. Specify a unique request ID so that if you must retry your request, the server will know to ignore the request if it has already been completed. For example, consider a situation where you make an initial request and the request times out. If you make the request again with the same request ID, the server can check if original operation with the same request ID was received, and if so, will ignore the second request. This prevents clients from accidentally creating duplicate commitments. The request ID must be a valid UUID with the exception that zero UUID is not supported ( 00000000-0000-0000-0000-000000000000).
  x__xgafv: string, V1 error format.
    Allowed values
      1 - v1 error format
      2 - v2 error format

Returns:
  An object of the form:

    { # Represents an Operation resource. Google Compute Engine has three Operation resources: * [Global](/compute/docs/reference/rest/alpha/globalOperations) * [Regional](/compute/docs/reference/rest/alpha/regionOperations) * [Zonal](/compute/docs/reference/rest/alpha/zoneOperations) You can use an operation resource to manage asynchronous API requests. For more information, read Handling API responses. Operations can be global, regional or zonal. - For global operations, use the `globalOperations` resource. - For regional operations, use the `regionOperations` resource. - For zonal operations, use the `zoneOperations` resource. For more information, read Global, Regional, and Zonal Resources. Note that completed Operation resources have a limited retention period.
  "clientOperationId": "A String", # [Output Only] The value of `requestId` if you provided it in the request. Not present otherwise.
  "creationTimestamp": "A String", # [Deprecated] This field is deprecated.
  "description": "A String", # [Output Only] A textual description of the operation, which is set when the operation is created.
  "endTime": "A String", # [Output Only] The time that this operation was completed. This value is in RFC3339 text format.
  "error": { # [Output Only] If errors are generated during processing of the operation, this field will be populated.
    "errors": [ # [Output Only] The array of errors encountered while processing this operation.
      {
        "code": "A String", # [Output Only] The error type identifier for this error.
        "errorDetails": [ # [Output Only] An optional list of messages that contain the error details. There is a set of defined message types to use for providing details.The syntax depends on the error code. For example, QuotaExceededInfo will have details when the error code is QUOTA_EXCEEDED.
          {
            "errorInfo": { # Describes the cause of the error with structured details. Example of an error when contacting the "pubsub.googleapis.com" API when it is not enabled: { "reason": "API_DISABLED" "domain": "googleapis.com" "metadata": { "resource": "projects/123", "service": "pubsub.googleapis.com" } } This response indicates that the pubsub.googleapis.com API is not enabled. Example of an error that is returned when attempting to create a Spanner instance in a region that is out of stock: { "reason": "STOCKOUT" "domain": "spanner.googleapis.com", "metadata": { "availableRegions": "us-central1,us-east2" } }
              "domain": "A String", # The logical grouping to which the "reason" belongs. The error domain is typically the registered service name of the tool or product that generates the error. Example: "pubsub.googleapis.com". If the error is generated by some common infrastructure, the error domain must be a globally unique value that identifies the infrastructure. For Google API infrastructure, the error domain is "googleapis.com".
              "metadatas": { # Additional structured details about this error. Keys should match /[a-zA-Z0-9-_]/ and be limited to 64 characters in length. When identifying the current value of an exceeded limit, the units should be contained in the key, not the value. For example, rather than {"instanceLimit": "100/request"}, should be returned as, {"instanceLimitPerRequest": "100"}, if the client exceeds the number of instances that can be created in a single (batch) request.
                "a_key": "A String",
              },
              "reason": "A String", # The reason of the error. This is a constant value that identifies the proximate cause of the error. Error reasons are unique within a particular domain of errors. This should be at most 63 characters and match a regular expression of `A-Z+[A-Z0-9]`, which represents UPPER_SNAKE_CASE.
            },
            "help": { # Provides links to documentation or for performing an out of band action. For example, if a quota check failed with an error indicating the calling project hasn't enabled the accessed service, this can contain a URL pointing directly to the right place in the developer console to flip the bit.
              "links": [ # URL(s) pointing to additional information on handling the current error.
                { # Describes a URL link.
                  "description": "A String", # Describes what the link offers.
                  "url": "A String", # The URL of the link.
                },
              ],
            },
            "localizedMessage": { # Provides a localized error message that is safe to return to the user which can be attached to an RPC error.
              "locale": "A String", # The locale used following the specification defined at https://www.rfc-editor.org/rfc/bcp/bcp47.txt. Examples are: "en-US", "fr-CH", "es-MX"
              "message": "A String", # The localized error message in the above locale.
            },
            "quotaInfo": { # Additional details for quota exceeded error for resource quota.
              "dimensions": { # The map holding related quota dimensions.
                "a_key": "A String",
              },
              "futureLimit": 3.14, # Future quota limit being rolled out. The limit's unit depends on the quota type or metric.
              "limit": 3.14, # Current effective quota limit. The limit's unit depends on the quota type or metric.
              "limitName": "A String", # The name of the quota limit.
              "metricName": "A String", # The Compute Engine quota metric name.
              "rolloutStatus": "A String", # Rollout status of the future quota limit.
            },
          },
        ],
        "location": "A String", # [Output Only] Indicates the field in the request that caused the error. This property is optional.
        "message": "A String", # [Output Only] An optional, human-readable error message.
      },
    ],
  },
  "httpErrorMessage": "A String", # [Output Only] If the operation fails, this field contains the HTTP error message that was returned, such as `NOT FOUND`.
  "httpErrorStatusCode": 42, # [Output Only] If the operation fails, this field contains the HTTP error status code that was returned. For example, a `404` means the resource was not found.
  "id": "A String", # [Output Only] The unique identifier for the operation. This identifier is defined by the server.
  "insertTime": "A String", # [Output Only] The time that this operation was requested. This value is in RFC3339 text format.
  "instancesBulkInsertOperationMetadata": {
    "perLocationStatus": { # Status information per location (location name is key). Example key: zones/us-central1-a
      "a_key": {
        "createdVmCount": 42, # [Output Only] Count of VMs successfully created so far.
        "deletedVmCount": 42, # [Output Only] Count of VMs that got deleted during rollback.
        "failedToCreateVmCount": 42, # [Output Only] Count of VMs that started creating but encountered an error.
        "status": "A String", # [Output Only] Creation status of BulkInsert operation - information if the flow is rolling forward or rolling back.
        "targetVmCount": 42, # [Output Only] Count of VMs originally planned to be created.
      },
    },
  },
  "kind": "compute#operation", # [Output Only] Type of the resource. Always `compute#operation` for Operation resources.
  "name": "A String", # [Output Only] Name of the operation.
  "operationGroupId": "A String", # [Output Only] An ID that represents a group of operations, such as when a group of operations results from a `bulkInsert` API request.
  "operationType": "A String", # [Output Only] The type of operation, such as `insert`, `update`, or `delete`, and so on.
  "progress": 42, # [Output Only] An optional progress indicator that ranges from 0 to 100. There is no requirement that this be linear or support any granularity of operations. This should not be used to guess when the operation will be complete. This number should monotonically increase as the operation progresses.
  "region": "A String", # [Output Only] The URL of the region where the operation resides. Only applicable when performing regional operations.
  "selfLink": "A String", # [Output Only] Server-defined URL for the resource.
  "selfLinkWithId": "A String", # [Output Only] Server-defined URL for this resource with the resource id.
  "setCommonInstanceMetadataOperationMetadata": { # [Output Only] If the operation is for projects.setCommonInstanceMetadata, this field will contain information on all underlying zonal actions and their state.
    "clientOperationId": "A String", # [Output Only] The client operation id.
    "perLocationOperations": { # [Output Only] Status information per location (location name is key). Example key: zones/us-central1-a
      "a_key": {
        "error": { # The `Status` type defines a logical error model that is suitable for different programming environments, including REST APIs and RPC APIs. It is used by [gRPC](https://github.com/grpc). Each `Status` message contains three pieces of data: error code, error message, and error details. You can find out more about this error model and how to work with it in the [API Design Guide](https://cloud.google.com/apis/design/errors). # [Output Only] If state is `ABANDONED` or `FAILED`, this field is populated.
          "code": 42, # The status code, which should be an enum value of google.rpc.Code.
          "details": [ # A list of messages that carry the error details. There is a common set of message types for APIs to use.
            {
              "a_key": "", # Properties of the object. Contains field @type with type URL.
            },
          ],
          "message": "A String", # A developer-facing error message, which should be in English. Any user-facing error message should be localized and sent in the google.rpc.Status.details field, or localized by the client.
        },
        "state": "A String", # [Output Only] Status of the action, which can be one of the following: `PROPAGATING`, `PROPAGATED`, `ABANDONED`, `FAILED`, or `DONE`.
      },
    },
  },
  "startTime": "A String", # [Output Only] The time that this operation was started by the server. This value is in RFC3339 text format.
  "status": "A String", # [Output Only] The status of the operation, which can be one of the following: `PENDING`, `RUNNING`, or `DONE`.
  "statusMessage": "A String", # [Output Only] An optional textual description of the current status of the operation.
  "targetId": "A String", # [Output Only] The unique target ID, which identifies a specific incarnation of the target resource.
  "targetLink": "A String", # [Output Only] The URL of the resource that the operation modifies. For operations related to creating a snapshot, this points to the persistent disk that the snapshot was created from.
  "user": "A String", # [Output Only] User who requested the operation, for example: `user@example.com` or `alice_smith_identifier (global/workforcePools/example-com-us-employees)`.
  "warnings": [ # [Output Only] If warning messages are generated during processing of the operation, this field will be populated.
    {
      "code": "A String", # [Output Only] A warning code, if applicable. For example, Compute Engine returns NO_RESULTS_ON_PAGE if there are no results in the response.
      "data": [ # [Output Only] Metadata about this warning in key: value format. For example: "data": [ { "key": "scope", "value": "zones/us-east1-d" }
        {
          "key": "A String", # [Output Only] A key that provides more detail on the warning being returned. For example, for warnings where there are no results in a list request for a particular zone, this key might be scope and the key value might be the zone name. Other examples might be a key indicating a deprecated resource and a suggested replacement, or a warning about invalid network settings (for example, if an instance attempts to perform IP forwarding but is not enabled for IP forwarding).
          "value": "A String", # [Output Only] A warning data value corresponding to the key.
        },
      ],
      "message": "A String", # [Output Only] A human-readable description of the warning code.
    },
  ],
  "zone": "A String", # [Output Only] The URL of the zone where the operation resides. Only applicable when performing per-zone operations.
}
setCommonInstanceMetadata(project, body=None, requestId=None, x__xgafv=None)
Sets metadata common to all instances within the specified project using the data included in the request.

Args:
  project: string, Project ID for this request. (required)
  body: object, The request body.
    The object takes the form of:

{ # A metadata key/value entry.
  "fingerprint": "A String", # Specifies a fingerprint for this request, which is essentially a hash of the metadata's contents and used for optimistic locking. The fingerprint is initially generated by Compute Engine and changes after every request to modify or update metadata. You must always provide an up-to-date fingerprint hash in order to update or change metadata, otherwise the request will fail with error 412 conditionNotMet. To see the latest fingerprint, make a get() request to retrieve the resource.
  "items": [ # Array of key/value pairs. The total size of all keys and values must be less than 512 KB.
    { # Metadata
      "key": "A String", # Key for the metadata entry. Keys must conform to the following regexp: [a-zA-Z0-9-_]+, and be less than 128 bytes in length. This is reflected as part of a URL in the metadata server. Additionally, to avoid ambiguity, keys must not conflict with any other metadata keys for the project.
      "value": "A String", # Value for the metadata entry. These are free-form strings, and only have meaning as interpreted by the image running in the instance. The only restriction placed on values is that their size must be less than or equal to 262144 bytes (256 KiB).
    },
  ],
  "kind": "compute#metadata", # [Output Only] Type of the resource. Always compute#metadata for metadata.
}

  requestId: string, An optional request ID to identify requests. Specify a unique request ID so that if you must retry your request, the server will know to ignore the request if it has already been completed. For example, consider a situation where you make an initial request and the request times out. If you make the request again with the same request ID, the server can check if original operation with the same request ID was received, and if so, will ignore the second request. This prevents clients from accidentally creating duplicate commitments. The request ID must be a valid UUID with the exception that zero UUID is not supported ( 00000000-0000-0000-0000-000000000000).
  x__xgafv: string, V1 error format.
    Allowed values
      1 - v1 error format
      2 - v2 error format

Returns:
  An object of the form:

    { # Represents an Operation resource. Google Compute Engine has three Operation resources: * [Global](/compute/docs/reference/rest/alpha/globalOperations) * [Regional](/compute/docs/reference/rest/alpha/regionOperations) * [Zonal](/compute/docs/reference/rest/alpha/zoneOperations) You can use an operation resource to manage asynchronous API requests. For more information, read Handling API responses. Operations can be global, regional or zonal. - For global operations, use the `globalOperations` resource. - For regional operations, use the `regionOperations` resource. - For zonal operations, use the `zoneOperations` resource. For more information, read Global, Regional, and Zonal Resources. Note that completed Operation resources have a limited retention period.
  "clientOperationId": "A String", # [Output Only] The value of `requestId` if you provided it in the request. Not present otherwise.
  "creationTimestamp": "A String", # [Deprecated] This field is deprecated.
  "description": "A String", # [Output Only] A textual description of the operation, which is set when the operation is created.
  "endTime": "A String", # [Output Only] The time that this operation was completed. This value is in RFC3339 text format.
  "error": { # [Output Only] If errors are generated during processing of the operation, this field will be populated.
    "errors": [ # [Output Only] The array of errors encountered while processing this operation.
      {
        "code": "A String", # [Output Only] The error type identifier for this error.
        "errorDetails": [ # [Output Only] An optional list of messages that contain the error details. There is a set of defined message types to use for providing details.The syntax depends on the error code. For example, QuotaExceededInfo will have details when the error code is QUOTA_EXCEEDED.
          {
            "errorInfo": { # Describes the cause of the error with structured details. Example of an error when contacting the "pubsub.googleapis.com" API when it is not enabled: { "reason": "API_DISABLED" "domain": "googleapis.com" "metadata": { "resource": "projects/123", "service": "pubsub.googleapis.com" } } This response indicates that the pubsub.googleapis.com API is not enabled. Example of an error that is returned when attempting to create a Spanner instance in a region that is out of stock: { "reason": "STOCKOUT" "domain": "spanner.googleapis.com", "metadata": { "availableRegions": "us-central1,us-east2" } }
              "domain": "A String", # The logical grouping to which the "reason" belongs. The error domain is typically the registered service name of the tool or product that generates the error. Example: "pubsub.googleapis.com". If the error is generated by some common infrastructure, the error domain must be a globally unique value that identifies the infrastructure. For Google API infrastructure, the error domain is "googleapis.com".
              "metadatas": { # Additional structured details about this error. Keys should match /[a-zA-Z0-9-_]/ and be limited to 64 characters in length. When identifying the current value of an exceeded limit, the units should be contained in the key, not the value. For example, rather than {"instanceLimit": "100/request"}, should be returned as, {"instanceLimitPerRequest": "100"}, if the client exceeds the number of instances that can be created in a single (batch) request.
                "a_key": "A String",
              },
              "reason": "A String", # The reason of the error. This is a constant value that identifies the proximate cause of the error. Error reasons are unique within a particular domain of errors. This should be at most 63 characters and match a regular expression of `A-Z+[A-Z0-9]`, which represents UPPER_SNAKE_CASE.
            },
            "help": { # Provides links to documentation or for performing an out of band action. For example, if a quota check failed with an error indicating the calling project hasn't enabled the accessed service, this can contain a URL pointing directly to the right place in the developer console to flip the bit.
              "links": [ # URL(s) pointing to additional information on handling the current error.
                { # Describes a URL link.
                  "description": "A String", # Describes what the link offers.
                  "url": "A String", # The URL of the link.
                },
              ],
            },
            "localizedMessage": { # Provides a localized error message that is safe to return to the user which can be attached to an RPC error.
              "locale": "A String", # The locale used following the specification defined at https://www.rfc-editor.org/rfc/bcp/bcp47.txt. Examples are: "en-US", "fr-CH", "es-MX"
              "message": "A String", # The localized error message in the above locale.
            },
            "quotaInfo": { # Additional details for quota exceeded error for resource quota.
              "dimensions": { # The map holding related quota dimensions.
                "a_key": "A String",
              },
              "futureLimit": 3.14, # Future quota limit being rolled out. The limit's unit depends on the quota type or metric.
              "limit": 3.14, # Current effective quota limit. The limit's unit depends on the quota type or metric.
              "limitName": "A String", # The name of the quota limit.
              "metricName": "A String", # The Compute Engine quota metric name.
              "rolloutStatus": "A String", # Rollout status of the future quota limit.
            },
          },
        ],
        "location": "A String", # [Output Only] Indicates the field in the request that caused the error. This property is optional.
        "message": "A String", # [Output Only] An optional, human-readable error message.
      },
    ],
  },
  "httpErrorMessage": "A String", # [Output Only] If the operation fails, this field contains the HTTP error message that was returned, such as `NOT FOUND`.
  "httpErrorStatusCode": 42, # [Output Only] If the operation fails, this field contains the HTTP error status code that was returned. For example, a `404` means the resource was not found.
  "id": "A String", # [Output Only] The unique identifier for the operation. This identifier is defined by the server.
  "insertTime": "A String", # [Output Only] The time that this operation was requested. This value is in RFC3339 text format.
  "instancesBulkInsertOperationMetadata": {
    "perLocationStatus": { # Status information per location (location name is key). Example key: zones/us-central1-a
      "a_key": {
        "createdVmCount": 42, # [Output Only] Count of VMs successfully created so far.
        "deletedVmCount": 42, # [Output Only] Count of VMs that got deleted during rollback.
        "failedToCreateVmCount": 42, # [Output Only] Count of VMs that started creating but encountered an error.
        "status": "A String", # [Output Only] Creation status of BulkInsert operation - information if the flow is rolling forward or rolling back.
        "targetVmCount": 42, # [Output Only] Count of VMs originally planned to be created.
      },
    },
  },
  "kind": "compute#operation", # [Output Only] Type of the resource. Always `compute#operation` for Operation resources.
  "name": "A String", # [Output Only] Name of the operation.
  "operationGroupId": "A String", # [Output Only] An ID that represents a group of operations, such as when a group of operations results from a `bulkInsert` API request.
  "operationType": "A String", # [Output Only] The type of operation, such as `insert`, `update`, or `delete`, and so on.
  "progress": 42, # [Output Only] An optional progress indicator that ranges from 0 to 100. There is no requirement that this be linear or support any granularity of operations. This should not be used to guess when the operation will be complete. This number should monotonically increase as the operation progresses.
  "region": "A String", # [Output Only] The URL of the region where the operation resides. Only applicable when performing regional operations.
  "selfLink": "A String", # [Output Only] Server-defined URL for the resource.
  "selfLinkWithId": "A String", # [Output Only] Server-defined URL for this resource with the resource id.
  "setCommonInstanceMetadataOperationMetadata": { # [Output Only] If the operation is for projects.setCommonInstanceMetadata, this field will contain information on all underlying zonal actions and their state.
    "clientOperationId": "A String", # [Output Only] The client operation id.
    "perLocationOperations": { # [Output Only] Status information per location (location name is key). Example key: zones/us-central1-a
      "a_key": {
        "error": { # The `Status` type defines a logical error model that is suitable for different programming environments, including REST APIs and RPC APIs. It is used by [gRPC](https://github.com/grpc). Each `Status` message contains three pieces of data: error code, error message, and error details. You can find out more about this error model and how to work with it in the [API Design Guide](https://cloud.google.com/apis/design/errors). # [Output Only] If state is `ABANDONED` or `FAILED`, this field is populated.
          "code": 42, # The status code, which should be an enum value of google.rpc.Code.
          "details": [ # A list of messages that carry the error details. There is a common set of message types for APIs to use.
            {
              "a_key": "", # Properties of the object. Contains field @type with type URL.
            },
          ],
          "message": "A String", # A developer-facing error message, which should be in English. Any user-facing error message should be localized and sent in the google.rpc.Status.details field, or localized by the client.
        },
        "state": "A String", # [Output Only] Status of the action, which can be one of the following: `PROPAGATING`, `PROPAGATED`, `ABANDONED`, `FAILED`, or `DONE`.
      },
    },
  },
  "startTime": "A String", # [Output Only] The time that this operation was started by the server. This value is in RFC3339 text format.
  "status": "A String", # [Output Only] The status of the operation, which can be one of the following: `PENDING`, `RUNNING`, or `DONE`.
  "statusMessage": "A String", # [Output Only] An optional textual description of the current status of the operation.
  "targetId": "A String", # [Output Only] The unique target ID, which identifies a specific incarnation of the target resource.
  "targetLink": "A String", # [Output Only] The URL of the resource that the operation modifies. For operations related to creating a snapshot, this points to the persistent disk that the snapshot was created from.
  "user": "A String", # [Output Only] User who requested the operation, for example: `user@example.com` or `alice_smith_identifier (global/workforcePools/example-com-us-employees)`.
  "warnings": [ # [Output Only] If warning messages are generated during processing of the operation, this field will be populated.
    {
      "code": "A String", # [Output Only] A warning code, if applicable. For example, Compute Engine returns NO_RESULTS_ON_PAGE if there are no results in the response.
      "data": [ # [Output Only] Metadata about this warning in key: value format. For example: "data": [ { "key": "scope", "value": "zones/us-east1-d" }
        {
          "key": "A String", # [Output Only] A key that provides more detail on the warning being returned. For example, for warnings where there are no results in a list request for a particular zone, this key might be scope and the key value might be the zone name. Other examples might be a key indicating a deprecated resource and a suggested replacement, or a warning about invalid network settings (for example, if an instance attempts to perform IP forwarding but is not enabled for IP forwarding).
          "value": "A String", # [Output Only] A warning data value corresponding to the key.
        },
      ],
      "message": "A String", # [Output Only] A human-readable description of the warning code.
    },
  ],
  "zone": "A String", # [Output Only] The URL of the zone where the operation resides. Only applicable when performing per-zone operations.
}
setDefaultNetworkTier(project, body=None, requestId=None, x__xgafv=None)
Sets the default network tier of the project. The default network tier is used when an address/forwardingRule/instance is created without specifying the network tier field.

Args:
  project: string, Project ID for this request. (required)
  body: object, The request body.
    The object takes the form of:

{
  "networkTier": "A String", # Default network tier to be set.
}

  requestId: string, An optional request ID to identify requests. Specify a unique request ID so that if you must retry your request, the server will know to ignore the request if it has already been completed. For example, consider a situation where you make an initial request and the request times out. If you make the request again with the same request ID, the server can check if original operation with the same request ID was received, and if so, will ignore the second request. This prevents clients from accidentally creating duplicate commitments. The request ID must be a valid UUID with the exception that zero UUID is not supported ( 00000000-0000-0000-0000-000000000000).
  x__xgafv: string, V1 error format.
    Allowed values
      1 - v1 error format
      2 - v2 error format

Returns:
  An object of the form:

    { # Represents an Operation resource. Google Compute Engine has three Operation resources: * [Global](/compute/docs/reference/rest/alpha/globalOperations) * [Regional](/compute/docs/reference/rest/alpha/regionOperations) * [Zonal](/compute/docs/reference/rest/alpha/zoneOperations) You can use an operation resource to manage asynchronous API requests. For more information, read Handling API responses. Operations can be global, regional or zonal. - For global operations, use the `globalOperations` resource. - For regional operations, use the `regionOperations` resource. - For zonal operations, use the `zoneOperations` resource. For more information, read Global, Regional, and Zonal Resources. Note that completed Operation resources have a limited retention period.
  "clientOperationId": "A String", # [Output Only] The value of `requestId` if you provided it in the request. Not present otherwise.
  "creationTimestamp": "A String", # [Deprecated] This field is deprecated.
  "description": "A String", # [Output Only] A textual description of the operation, which is set when the operation is created.
  "endTime": "A String", # [Output Only] The time that this operation was completed. This value is in RFC3339 text format.
  "error": { # [Output Only] If errors are generated during processing of the operation, this field will be populated.
    "errors": [ # [Output Only] The array of errors encountered while processing this operation.
      {
        "code": "A String", # [Output Only] The error type identifier for this error.
        "errorDetails": [ # [Output Only] An optional list of messages that contain the error details. There is a set of defined message types to use for providing details.The syntax depends on the error code. For example, QuotaExceededInfo will have details when the error code is QUOTA_EXCEEDED.
          {
            "errorInfo": { # Describes the cause of the error with structured details. Example of an error when contacting the "pubsub.googleapis.com" API when it is not enabled: { "reason": "API_DISABLED" "domain": "googleapis.com" "metadata": { "resource": "projects/123", "service": "pubsub.googleapis.com" } } This response indicates that the pubsub.googleapis.com API is not enabled. Example of an error that is returned when attempting to create a Spanner instance in a region that is out of stock: { "reason": "STOCKOUT" "domain": "spanner.googleapis.com", "metadata": { "availableRegions": "us-central1,us-east2" } }
              "domain": "A String", # The logical grouping to which the "reason" belongs. The error domain is typically the registered service name of the tool or product that generates the error. Example: "pubsub.googleapis.com". If the error is generated by some common infrastructure, the error domain must be a globally unique value that identifies the infrastructure. For Google API infrastructure, the error domain is "googleapis.com".
              "metadatas": { # Additional structured details about this error. Keys should match /[a-zA-Z0-9-_]/ and be limited to 64 characters in length. When identifying the current value of an exceeded limit, the units should be contained in the key, not the value. For example, rather than {"instanceLimit": "100/request"}, should be returned as, {"instanceLimitPerRequest": "100"}, if the client exceeds the number of instances that can be created in a single (batch) request.
                "a_key": "A String",
              },
              "reason": "A String", # The reason of the error. This is a constant value that identifies the proximate cause of the error. Error reasons are unique within a particular domain of errors. This should be at most 63 characters and match a regular expression of `A-Z+[A-Z0-9]`, which represents UPPER_SNAKE_CASE.
            },
            "help": { # Provides links to documentation or for performing an out of band action. For example, if a quota check failed with an error indicating the calling project hasn't enabled the accessed service, this can contain a URL pointing directly to the right place in the developer console to flip the bit.
              "links": [ # URL(s) pointing to additional information on handling the current error.
                { # Describes a URL link.
                  "description": "A String", # Describes what the link offers.
                  "url": "A String", # The URL of the link.
                },
              ],
            },
            "localizedMessage": { # Provides a localized error message that is safe to return to the user which can be attached to an RPC error.
              "locale": "A String", # The locale used following the specification defined at https://www.rfc-editor.org/rfc/bcp/bcp47.txt. Examples are: "en-US", "fr-CH", "es-MX"
              "message": "A String", # The localized error message in the above locale.
            },
            "quotaInfo": { # Additional details for quota exceeded error for resource quota.
              "dimensions": { # The map holding related quota dimensions.
                "a_key": "A String",
              },
              "futureLimit": 3.14, # Future quota limit being rolled out. The limit's unit depends on the quota type or metric.
              "limit": 3.14, # Current effective quota limit. The limit's unit depends on the quota type or metric.
              "limitName": "A String", # The name of the quota limit.
              "metricName": "A String", # The Compute Engine quota metric name.
              "rolloutStatus": "A String", # Rollout status of the future quota limit.
            },
          },
        ],
        "location": "A String", # [Output Only] Indicates the field in the request that caused the error. This property is optional.
        "message": "A String", # [Output Only] An optional, human-readable error message.
      },
    ],
  },
  "httpErrorMessage": "A String", # [Output Only] If the operation fails, this field contains the HTTP error message that was returned, such as `NOT FOUND`.
  "httpErrorStatusCode": 42, # [Output Only] If the operation fails, this field contains the HTTP error status code that was returned. For example, a `404` means the resource was not found.
  "id": "A String", # [Output Only] The unique identifier for the operation. This identifier is defined by the server.
  "insertTime": "A String", # [Output Only] The time that this operation was requested. This value is in RFC3339 text format.
  "instancesBulkInsertOperationMetadata": {
    "perLocationStatus": { # Status information per location (location name is key). Example key: zones/us-central1-a
      "a_key": {
        "createdVmCount": 42, # [Output Only] Count of VMs successfully created so far.
        "deletedVmCount": 42, # [Output Only] Count of VMs that got deleted during rollback.
        "failedToCreateVmCount": 42, # [Output Only] Count of VMs that started creating but encountered an error.
        "status": "A String", # [Output Only] Creation status of BulkInsert operation - information if the flow is rolling forward or rolling back.
        "targetVmCount": 42, # [Output Only] Count of VMs originally planned to be created.
      },
    },
  },
  "kind": "compute#operation", # [Output Only] Type of the resource. Always `compute#operation` for Operation resources.
  "name": "A String", # [Output Only] Name of the operation.
  "operationGroupId": "A String", # [Output Only] An ID that represents a group of operations, such as when a group of operations results from a `bulkInsert` API request.
  "operationType": "A String", # [Output Only] The type of operation, such as `insert`, `update`, or `delete`, and so on.
  "progress": 42, # [Output Only] An optional progress indicator that ranges from 0 to 100. There is no requirement that this be linear or support any granularity of operations. This should not be used to guess when the operation will be complete. This number should monotonically increase as the operation progresses.
  "region": "A String", # [Output Only] The URL of the region where the operation resides. Only applicable when performing regional operations.
  "selfLink": "A String", # [Output Only] Server-defined URL for the resource.
  "selfLinkWithId": "A String", # [Output Only] Server-defined URL for this resource with the resource id.
  "setCommonInstanceMetadataOperationMetadata": { # [Output Only] If the operation is for projects.setCommonInstanceMetadata, this field will contain information on all underlying zonal actions and their state.
    "clientOperationId": "A String", # [Output Only] The client operation id.
    "perLocationOperations": { # [Output Only] Status information per location (location name is key). Example key: zones/us-central1-a
      "a_key": {
        "error": { # The `Status` type defines a logical error model that is suitable for different programming environments, including REST APIs and RPC APIs. It is used by [gRPC](https://github.com/grpc). Each `Status` message contains three pieces of data: error code, error message, and error details. You can find out more about this error model and how to work with it in the [API Design Guide](https://cloud.google.com/apis/design/errors). # [Output Only] If state is `ABANDONED` or `FAILED`, this field is populated.
          "code": 42, # The status code, which should be an enum value of google.rpc.Code.
          "details": [ # A list of messages that carry the error details. There is a common set of message types for APIs to use.
            {
              "a_key": "", # Properties of the object. Contains field @type with type URL.
            },
          ],
          "message": "A String", # A developer-facing error message, which should be in English. Any user-facing error message should be localized and sent in the google.rpc.Status.details field, or localized by the client.
        },
        "state": "A String", # [Output Only] Status of the action, which can be one of the following: `PROPAGATING`, `PROPAGATED`, `ABANDONED`, `FAILED`, or `DONE`.
      },
    },
  },
  "startTime": "A String", # [Output Only] The time that this operation was started by the server. This value is in RFC3339 text format.
  "status": "A String", # [Output Only] The status of the operation, which can be one of the following: `PENDING`, `RUNNING`, or `DONE`.
  "statusMessage": "A String", # [Output Only] An optional textual description of the current status of the operation.
  "targetId": "A String", # [Output Only] The unique target ID, which identifies a specific incarnation of the target resource.
  "targetLink": "A String", # [Output Only] The URL of the resource that the operation modifies. For operations related to creating a snapshot, this points to the persistent disk that the snapshot was created from.
  "user": "A String", # [Output Only] User who requested the operation, for example: `user@example.com` or `alice_smith_identifier (global/workforcePools/example-com-us-employees)`.
  "warnings": [ # [Output Only] If warning messages are generated during processing of the operation, this field will be populated.
    {
      "code": "A String", # [Output Only] A warning code, if applicable. For example, Compute Engine returns NO_RESULTS_ON_PAGE if there are no results in the response.
      "data": [ # [Output Only] Metadata about this warning in key: value format. For example: "data": [ { "key": "scope", "value": "zones/us-east1-d" }
        {
          "key": "A String", # [Output Only] A key that provides more detail on the warning being returned. For example, for warnings where there are no results in a list request for a particular zone, this key might be scope and the key value might be the zone name. Other examples might be a key indicating a deprecated resource and a suggested replacement, or a warning about invalid network settings (for example, if an instance attempts to perform IP forwarding but is not enabled for IP forwarding).
          "value": "A String", # [Output Only] A warning data value corresponding to the key.
        },
      ],
      "message": "A String", # [Output Only] A human-readable description of the warning code.
    },
  ],
  "zone": "A String", # [Output Only] The URL of the zone where the operation resides. Only applicable when performing per-zone operations.
}
setDefaultServiceAccount(project, body=None, requestId=None, x__xgafv=None)
Sets the default service account of the project. The default service account is used when a VM instance is created with the service account email address set to "default".

Args:
  project: string, Project ID for this request. (required)
  body: object, The request body.
    The object takes the form of:

{
  "email": "A String", # Email address of the service account.
}

  requestId: string, An optional request ID to identify requests. Specify a unique request ID so that if you must retry your request, the server will know to ignore the request if it has already been completed. For example, consider a situation where you make an initial request and the request times out. If you make the request again with the same request ID, the server can check if original operation with the same request ID was received, and if so, will ignore the second request. This prevents clients from accidentally creating duplicate commitments. The request ID must be a valid UUID with the exception that zero UUID is not supported ( 00000000-0000-0000-0000-000000000000).
  x__xgafv: string, V1 error format.
    Allowed values
      1 - v1 error format
      2 - v2 error format

Returns:
  An object of the form:

    { # Represents an Operation resource. Google Compute Engine has three Operation resources: * [Global](/compute/docs/reference/rest/alpha/globalOperations) * [Regional](/compute/docs/reference/rest/alpha/regionOperations) * [Zonal](/compute/docs/reference/rest/alpha/zoneOperations) You can use an operation resource to manage asynchronous API requests. For more information, read Handling API responses. Operations can be global, regional or zonal. - For global operations, use the `globalOperations` resource. - For regional operations, use the `regionOperations` resource. - For zonal operations, use the `zoneOperations` resource. For more information, read Global, Regional, and Zonal Resources. Note that completed Operation resources have a limited retention period.
  "clientOperationId": "A String", # [Output Only] The value of `requestId` if you provided it in the request. Not present otherwise.
  "creationTimestamp": "A String", # [Deprecated] This field is deprecated.
  "description": "A String", # [Output Only] A textual description of the operation, which is set when the operation is created.
  "endTime": "A String", # [Output Only] The time that this operation was completed. This value is in RFC3339 text format.
  "error": { # [Output Only] If errors are generated during processing of the operation, this field will be populated.
    "errors": [ # [Output Only] The array of errors encountered while processing this operation.
      {
        "code": "A String", # [Output Only] The error type identifier for this error.
        "errorDetails": [ # [Output Only] An optional list of messages that contain the error details. There is a set of defined message types to use for providing details.The syntax depends on the error code. For example, QuotaExceededInfo will have details when the error code is QUOTA_EXCEEDED.
          {
            "errorInfo": { # Describes the cause of the error with structured details. Example of an error when contacting the "pubsub.googleapis.com" API when it is not enabled: { "reason": "API_DISABLED" "domain": "googleapis.com" "metadata": { "resource": "projects/123", "service": "pubsub.googleapis.com" } } This response indicates that the pubsub.googleapis.com API is not enabled. Example of an error that is returned when attempting to create a Spanner instance in a region that is out of stock: { "reason": "STOCKOUT" "domain": "spanner.googleapis.com", "metadata": { "availableRegions": "us-central1,us-east2" } }
              "domain": "A String", # The logical grouping to which the "reason" belongs. The error domain is typically the registered service name of the tool or product that generates the error. Example: "pubsub.googleapis.com". If the error is generated by some common infrastructure, the error domain must be a globally unique value that identifies the infrastructure. For Google API infrastructure, the error domain is "googleapis.com".
              "metadatas": { # Additional structured details about this error. Keys should match /[a-zA-Z0-9-_]/ and be limited to 64 characters in length. When identifying the current value of an exceeded limit, the units should be contained in the key, not the value. For example, rather than {"instanceLimit": "100/request"}, should be returned as, {"instanceLimitPerRequest": "100"}, if the client exceeds the number of instances that can be created in a single (batch) request.
                "a_key": "A String",
              },
              "reason": "A String", # The reason of the error. This is a constant value that identifies the proximate cause of the error. Error reasons are unique within a particular domain of errors. This should be at most 63 characters and match a regular expression of `A-Z+[A-Z0-9]`, which represents UPPER_SNAKE_CASE.
            },
            "help": { # Provides links to documentation or for performing an out of band action. For example, if a quota check failed with an error indicating the calling project hasn't enabled the accessed service, this can contain a URL pointing directly to the right place in the developer console to flip the bit.
              "links": [ # URL(s) pointing to additional information on handling the current error.
                { # Describes a URL link.
                  "description": "A String", # Describes what the link offers.
                  "url": "A String", # The URL of the link.
                },
              ],
            },
            "localizedMessage": { # Provides a localized error message that is safe to return to the user which can be attached to an RPC error.
              "locale": "A String", # The locale used following the specification defined at https://www.rfc-editor.org/rfc/bcp/bcp47.txt. Examples are: "en-US", "fr-CH", "es-MX"
              "message": "A String", # The localized error message in the above locale.
            },
            "quotaInfo": { # Additional details for quota exceeded error for resource quota.
              "dimensions": { # The map holding related quota dimensions.
                "a_key": "A String",
              },
              "futureLimit": 3.14, # Future quota limit being rolled out. The limit's unit depends on the quota type or metric.
              "limit": 3.14, # Current effective quota limit. The limit's unit depends on the quota type or metric.
              "limitName": "A String", # The name of the quota limit.
              "metricName": "A String", # The Compute Engine quota metric name.
              "rolloutStatus": "A String", # Rollout status of the future quota limit.
            },
          },
        ],
        "location": "A String", # [Output Only] Indicates the field in the request that caused the error. This property is optional.
        "message": "A String", # [Output Only] An optional, human-readable error message.
      },
    ],
  },
  "httpErrorMessage": "A String", # [Output Only] If the operation fails, this field contains the HTTP error message that was returned, such as `NOT FOUND`.
  "httpErrorStatusCode": 42, # [Output Only] If the operation fails, this field contains the HTTP error status code that was returned. For example, a `404` means the resource was not found.
  "id": "A String", # [Output Only] The unique identifier for the operation. This identifier is defined by the server.
  "insertTime": "A String", # [Output Only] The time that this operation was requested. This value is in RFC3339 text format.
  "instancesBulkInsertOperationMetadata": {
    "perLocationStatus": { # Status information per location (location name is key). Example key: zones/us-central1-a
      "a_key": {
        "createdVmCount": 42, # [Output Only] Count of VMs successfully created so far.
        "deletedVmCount": 42, # [Output Only] Count of VMs that got deleted during rollback.
        "failedToCreateVmCount": 42, # [Output Only] Count of VMs that started creating but encountered an error.
        "status": "A String", # [Output Only] Creation status of BulkInsert operation - information if the flow is rolling forward or rolling back.
        "targetVmCount": 42, # [Output Only] Count of VMs originally planned to be created.
      },
    },
  },
  "kind": "compute#operation", # [Output Only] Type of the resource. Always `compute#operation` for Operation resources.
  "name": "A String", # [Output Only] Name of the operation.
  "operationGroupId": "A String", # [Output Only] An ID that represents a group of operations, such as when a group of operations results from a `bulkInsert` API request.
  "operationType": "A String", # [Output Only] The type of operation, such as `insert`, `update`, or `delete`, and so on.
  "progress": 42, # [Output Only] An optional progress indicator that ranges from 0 to 100. There is no requirement that this be linear or support any granularity of operations. This should not be used to guess when the operation will be complete. This number should monotonically increase as the operation progresses.
  "region": "A String", # [Output Only] The URL of the region where the operation resides. Only applicable when performing regional operations.
  "selfLink": "A String", # [Output Only] Server-defined URL for the resource.
  "selfLinkWithId": "A String", # [Output Only] Server-defined URL for this resource with the resource id.
  "setCommonInstanceMetadataOperationMetadata": { # [Output Only] If the operation is for projects.setCommonInstanceMetadata, this field will contain information on all underlying zonal actions and their state.
    "clientOperationId": "A String", # [Output Only] The client operation id.
    "perLocationOperations": { # [Output Only] Status information per location (location name is key). Example key: zones/us-central1-a
      "a_key": {
        "error": { # The `Status` type defines a logical error model that is suitable for different programming environments, including REST APIs and RPC APIs. It is used by [gRPC](https://github.com/grpc). Each `Status` message contains three pieces of data: error code, error message, and error details. You can find out more about this error model and how to work with it in the [API Design Guide](https://cloud.google.com/apis/design/errors). # [Output Only] If state is `ABANDONED` or `FAILED`, this field is populated.
          "code": 42, # The status code, which should be an enum value of google.rpc.Code.
          "details": [ # A list of messages that carry the error details. There is a common set of message types for APIs to use.
            {
              "a_key": "", # Properties of the object. Contains field @type with type URL.
            },
          ],
          "message": "A String", # A developer-facing error message, which should be in English. Any user-facing error message should be localized and sent in the google.rpc.Status.details field, or localized by the client.
        },
        "state": "A String", # [Output Only] Status of the action, which can be one of the following: `PROPAGATING`, `PROPAGATED`, `ABANDONED`, `FAILED`, or `DONE`.
      },
    },
  },
  "startTime": "A String", # [Output Only] The time that this operation was started by the server. This value is in RFC3339 text format.
  "status": "A String", # [Output Only] The status of the operation, which can be one of the following: `PENDING`, `RUNNING`, or `DONE`.
  "statusMessage": "A String", # [Output Only] An optional textual description of the current status of the operation.
  "targetId": "A String", # [Output Only] The unique target ID, which identifies a specific incarnation of the target resource.
  "targetLink": "A String", # [Output Only] The URL of the resource that the operation modifies. For operations related to creating a snapshot, this points to the persistent disk that the snapshot was created from.
  "user": "A String", # [Output Only] User who requested the operation, for example: `user@example.com` or `alice_smith_identifier (global/workforcePools/example-com-us-employees)`.
  "warnings": [ # [Output Only] If warning messages are generated during processing of the operation, this field will be populated.
    {
      "code": "A String", # [Output Only] A warning code, if applicable. For example, Compute Engine returns NO_RESULTS_ON_PAGE if there are no results in the response.
      "data": [ # [Output Only] Metadata about this warning in key: value format. For example: "data": [ { "key": "scope", "value": "zones/us-east1-d" }
        {
          "key": "A String", # [Output Only] A key that provides more detail on the warning being returned. For example, for warnings where there are no results in a list request for a particular zone, this key might be scope and the key value might be the zone name. Other examples might be a key indicating a deprecated resource and a suggested replacement, or a warning about invalid network settings (for example, if an instance attempts to perform IP forwarding but is not enabled for IP forwarding).
          "value": "A String", # [Output Only] A warning data value corresponding to the key.
        },
      ],
      "message": "A String", # [Output Only] A human-readable description of the warning code.
    },
  ],
  "zone": "A String", # [Output Only] The URL of the zone where the operation resides. Only applicable when performing per-zone operations.
}
setManagedProtectionTier(project, body=None, requestId=None, x__xgafv=None)
Sets the Cloud Armor Managed Protection (CAMP) tier of the project. To set PLUS or above the billing account of the project must be subscribed to Managed Protection Plus. See Subscribing to Managed Protection Plus for more information.

Args:
  project: string, Project ID for this request. (required)
  body: object, The request body.
    The object takes the form of:

{
  "managedProtectionTier": "A String", # Managed protection tier to be set.
}

  requestId: string, An optional request ID to identify requests. Specify a unique request ID so that if you must retry your request, the server will know to ignore the request if it has already been completed. For example, consider a situation where you make an initial request and the request times out. If you make the request again with the same request ID, the server can check if original operation with the same request ID was received, and if so, will ignore the second request. This prevents clients from accidentally creating duplicate commitments. The request ID must be a valid UUID with the exception that zero UUID is not supported ( 00000000-0000-0000-0000-000000000000).
  x__xgafv: string, V1 error format.
    Allowed values
      1 - v1 error format
      2 - v2 error format

Returns:
  An object of the form:

    { # Represents an Operation resource. Google Compute Engine has three Operation resources: * [Global](/compute/docs/reference/rest/alpha/globalOperations) * [Regional](/compute/docs/reference/rest/alpha/regionOperations) * [Zonal](/compute/docs/reference/rest/alpha/zoneOperations) You can use an operation resource to manage asynchronous API requests. For more information, read Handling API responses. Operations can be global, regional or zonal. - For global operations, use the `globalOperations` resource. - For regional operations, use the `regionOperations` resource. - For zonal operations, use the `zoneOperations` resource. For more information, read Global, Regional, and Zonal Resources. Note that completed Operation resources have a limited retention period.
  "clientOperationId": "A String", # [Output Only] The value of `requestId` if you provided it in the request. Not present otherwise.
  "creationTimestamp": "A String", # [Deprecated] This field is deprecated.
  "description": "A String", # [Output Only] A textual description of the operation, which is set when the operation is created.
  "endTime": "A String", # [Output Only] The time that this operation was completed. This value is in RFC3339 text format.
  "error": { # [Output Only] If errors are generated during processing of the operation, this field will be populated.
    "errors": [ # [Output Only] The array of errors encountered while processing this operation.
      {
        "code": "A String", # [Output Only] The error type identifier for this error.
        "errorDetails": [ # [Output Only] An optional list of messages that contain the error details. There is a set of defined message types to use for providing details.The syntax depends on the error code. For example, QuotaExceededInfo will have details when the error code is QUOTA_EXCEEDED.
          {
            "errorInfo": { # Describes the cause of the error with structured details. Example of an error when contacting the "pubsub.googleapis.com" API when it is not enabled: { "reason": "API_DISABLED" "domain": "googleapis.com" "metadata": { "resource": "projects/123", "service": "pubsub.googleapis.com" } } This response indicates that the pubsub.googleapis.com API is not enabled. Example of an error that is returned when attempting to create a Spanner instance in a region that is out of stock: { "reason": "STOCKOUT" "domain": "spanner.googleapis.com", "metadata": { "availableRegions": "us-central1,us-east2" } }
              "domain": "A String", # The logical grouping to which the "reason" belongs. The error domain is typically the registered service name of the tool or product that generates the error. Example: "pubsub.googleapis.com". If the error is generated by some common infrastructure, the error domain must be a globally unique value that identifies the infrastructure. For Google API infrastructure, the error domain is "googleapis.com".
              "metadatas": { # Additional structured details about this error. Keys should match /[a-zA-Z0-9-_]/ and be limited to 64 characters in length. When identifying the current value of an exceeded limit, the units should be contained in the key, not the value. For example, rather than {"instanceLimit": "100/request"}, should be returned as, {"instanceLimitPerRequest": "100"}, if the client exceeds the number of instances that can be created in a single (batch) request.
                "a_key": "A String",
              },
              "reason": "A String", # The reason of the error. This is a constant value that identifies the proximate cause of the error. Error reasons are unique within a particular domain of errors. This should be at most 63 characters and match a regular expression of `A-Z+[A-Z0-9]`, which represents UPPER_SNAKE_CASE.
            },
            "help": { # Provides links to documentation or for performing an out of band action. For example, if a quota check failed with an error indicating the calling project hasn't enabled the accessed service, this can contain a URL pointing directly to the right place in the developer console to flip the bit.
              "links": [ # URL(s) pointing to additional information on handling the current error.
                { # Describes a URL link.
                  "description": "A String", # Describes what the link offers.
                  "url": "A String", # The URL of the link.
                },
              ],
            },
            "localizedMessage": { # Provides a localized error message that is safe to return to the user which can be attached to an RPC error.
              "locale": "A String", # The locale used following the specification defined at https://www.rfc-editor.org/rfc/bcp/bcp47.txt. Examples are: "en-US", "fr-CH", "es-MX"
              "message": "A String", # The localized error message in the above locale.
            },
            "quotaInfo": { # Additional details for quota exceeded error for resource quota.
              "dimensions": { # The map holding related quota dimensions.
                "a_key": "A String",
              },
              "futureLimit": 3.14, # Future quota limit being rolled out. The limit's unit depends on the quota type or metric.
              "limit": 3.14, # Current effective quota limit. The limit's unit depends on the quota type or metric.
              "limitName": "A String", # The name of the quota limit.
              "metricName": "A String", # The Compute Engine quota metric name.
              "rolloutStatus": "A String", # Rollout status of the future quota limit.
            },
          },
        ],
        "location": "A String", # [Output Only] Indicates the field in the request that caused the error. This property is optional.
        "message": "A String", # [Output Only] An optional, human-readable error message.
      },
    ],
  },
  "httpErrorMessage": "A String", # [Output Only] If the operation fails, this field contains the HTTP error message that was returned, such as `NOT FOUND`.
  "httpErrorStatusCode": 42, # [Output Only] If the operation fails, this field contains the HTTP error status code that was returned. For example, a `404` means the resource was not found.
  "id": "A String", # [Output Only] The unique identifier for the operation. This identifier is defined by the server.
  "insertTime": "A String", # [Output Only] The time that this operation was requested. This value is in RFC3339 text format.
  "instancesBulkInsertOperationMetadata": {
    "perLocationStatus": { # Status information per location (location name is key). Example key: zones/us-central1-a
      "a_key": {
        "createdVmCount": 42, # [Output Only] Count of VMs successfully created so far.
        "deletedVmCount": 42, # [Output Only] Count of VMs that got deleted during rollback.
        "failedToCreateVmCount": 42, # [Output Only] Count of VMs that started creating but encountered an error.
        "status": "A String", # [Output Only] Creation status of BulkInsert operation - information if the flow is rolling forward or rolling back.
        "targetVmCount": 42, # [Output Only] Count of VMs originally planned to be created.
      },
    },
  },
  "kind": "compute#operation", # [Output Only] Type of the resource. Always `compute#operation` for Operation resources.
  "name": "A String", # [Output Only] Name of the operation.
  "operationGroupId": "A String", # [Output Only] An ID that represents a group of operations, such as when a group of operations results from a `bulkInsert` API request.
  "operationType": "A String", # [Output Only] The type of operation, such as `insert`, `update`, or `delete`, and so on.
  "progress": 42, # [Output Only] An optional progress indicator that ranges from 0 to 100. There is no requirement that this be linear or support any granularity of operations. This should not be used to guess when the operation will be complete. This number should monotonically increase as the operation progresses.
  "region": "A String", # [Output Only] The URL of the region where the operation resides. Only applicable when performing regional operations.
  "selfLink": "A String", # [Output Only] Server-defined URL for the resource.
  "selfLinkWithId": "A String", # [Output Only] Server-defined URL for this resource with the resource id.
  "setCommonInstanceMetadataOperationMetadata": { # [Output Only] If the operation is for projects.setCommonInstanceMetadata, this field will contain information on all underlying zonal actions and their state.
    "clientOperationId": "A String", # [Output Only] The client operation id.
    "perLocationOperations": { # [Output Only] Status information per location (location name is key). Example key: zones/us-central1-a
      "a_key": {
        "error": { # The `Status` type defines a logical error model that is suitable for different programming environments, including REST APIs and RPC APIs. It is used by [gRPC](https://github.com/grpc). Each `Status` message contains three pieces of data: error code, error message, and error details. You can find out more about this error model and how to work with it in the [API Design Guide](https://cloud.google.com/apis/design/errors). # [Output Only] If state is `ABANDONED` or `FAILED`, this field is populated.
          "code": 42, # The status code, which should be an enum value of google.rpc.Code.
          "details": [ # A list of messages that carry the error details. There is a common set of message types for APIs to use.
            {
              "a_key": "", # Properties of the object. Contains field @type with type URL.
            },
          ],
          "message": "A String", # A developer-facing error message, which should be in English. Any user-facing error message should be localized and sent in the google.rpc.Status.details field, or localized by the client.
        },
        "state": "A String", # [Output Only] Status of the action, which can be one of the following: `PROPAGATING`, `PROPAGATED`, `ABANDONED`, `FAILED`, or `DONE`.
      },
    },
  },
  "startTime": "A String", # [Output Only] The time that this operation was started by the server. This value is in RFC3339 text format.
  "status": "A String", # [Output Only] The status of the operation, which can be one of the following: `PENDING`, `RUNNING`, or `DONE`.
  "statusMessage": "A String", # [Output Only] An optional textual description of the current status of the operation.
  "targetId": "A String", # [Output Only] The unique target ID, which identifies a specific incarnation of the target resource.
  "targetLink": "A String", # [Output Only] The URL of the resource that the operation modifies. For operations related to creating a snapshot, this points to the persistent disk that the snapshot was created from.
  "user": "A String", # [Output Only] User who requested the operation, for example: `user@example.com` or `alice_smith_identifier (global/workforcePools/example-com-us-employees)`.
  "warnings": [ # [Output Only] If warning messages are generated during processing of the operation, this field will be populated.
    {
      "code": "A String", # [Output Only] A warning code, if applicable. For example, Compute Engine returns NO_RESULTS_ON_PAGE if there are no results in the response.
      "data": [ # [Output Only] Metadata about this warning in key: value format. For example: "data": [ { "key": "scope", "value": "zones/us-east1-d" }
        {
          "key": "A String", # [Output Only] A key that provides more detail on the warning being returned. For example, for warnings where there are no results in a list request for a particular zone, this key might be scope and the key value might be the zone name. Other examples might be a key indicating a deprecated resource and a suggested replacement, or a warning about invalid network settings (for example, if an instance attempts to perform IP forwarding but is not enabled for IP forwarding).
          "value": "A String", # [Output Only] A warning data value corresponding to the key.
        },
      ],
      "message": "A String", # [Output Only] A human-readable description of the warning code.
    },
  ],
  "zone": "A String", # [Output Only] The URL of the zone where the operation resides. Only applicable when performing per-zone operations.
}
setUsageExportBucket(project, body=None, requestId=None, x__xgafv=None)
Enables the usage export feature and sets the usage export bucket where reports are stored. If you provide an empty request body using this method, the usage export feature will be disabled.

Args:
  project: string, Project ID for this request. (required)
  body: object, The request body.
    The object takes the form of:

{ # The location in Cloud Storage and naming method of the daily usage report. Contains bucket_name and report_name prefix.
  "bucketName": "A String", # The name of an existing bucket in Cloud Storage where the usage report object is stored. The Google Service Account is granted write access to this bucket. This can either be the bucket name by itself, such as example-bucket, or the bucket name with gs:// or https://storage.googleapis.com/ in front of it, such as gs://example-bucket.
  "reportNamePrefix": "A String", # An optional prefix for the name of the usage report object stored in bucketName. If not supplied, defaults to usage_gce. The report is stored as a CSV file named report_name_prefix_gce_YYYYMMDD.csv where YYYYMMDD is the day of the usage according to Pacific Time. If you supply a prefix, it should conform to Cloud Storage object naming conventions.
}

  requestId: string, An optional request ID to identify requests. Specify a unique request ID so that if you must retry your request, the server will know to ignore the request if it has already been completed. For example, consider a situation where you make an initial request and the request times out. If you make the request again with the same request ID, the server can check if original operation with the same request ID was received, and if so, will ignore the second request. This prevents clients from accidentally creating duplicate commitments. The request ID must be a valid UUID with the exception that zero UUID is not supported ( 00000000-0000-0000-0000-000000000000).
  x__xgafv: string, V1 error format.
    Allowed values
      1 - v1 error format
      2 - v2 error format

Returns:
  An object of the form:

    { # Represents an Operation resource. Google Compute Engine has three Operation resources: * [Global](/compute/docs/reference/rest/alpha/globalOperations) * [Regional](/compute/docs/reference/rest/alpha/regionOperations) * [Zonal](/compute/docs/reference/rest/alpha/zoneOperations) You can use an operation resource to manage asynchronous API requests. For more information, read Handling API responses. Operations can be global, regional or zonal. - For global operations, use the `globalOperations` resource. - For regional operations, use the `regionOperations` resource. - For zonal operations, use the `zoneOperations` resource. For more information, read Global, Regional, and Zonal Resources. Note that completed Operation resources have a limited retention period.
  "clientOperationId": "A String", # [Output Only] The value of `requestId` if you provided it in the request. Not present otherwise.
  "creationTimestamp": "A String", # [Deprecated] This field is deprecated.
  "description": "A String", # [Output Only] A textual description of the operation, which is set when the operation is created.
  "endTime": "A String", # [Output Only] The time that this operation was completed. This value is in RFC3339 text format.
  "error": { # [Output Only] If errors are generated during processing of the operation, this field will be populated.
    "errors": [ # [Output Only] The array of errors encountered while processing this operation.
      {
        "code": "A String", # [Output Only] The error type identifier for this error.
        "errorDetails": [ # [Output Only] An optional list of messages that contain the error details. There is a set of defined message types to use for providing details.The syntax depends on the error code. For example, QuotaExceededInfo will have details when the error code is QUOTA_EXCEEDED.
          {
            "errorInfo": { # Describes the cause of the error with structured details. Example of an error when contacting the "pubsub.googleapis.com" API when it is not enabled: { "reason": "API_DISABLED" "domain": "googleapis.com" "metadata": { "resource": "projects/123", "service": "pubsub.googleapis.com" } } This response indicates that the pubsub.googleapis.com API is not enabled. Example of an error that is returned when attempting to create a Spanner instance in a region that is out of stock: { "reason": "STOCKOUT" "domain": "spanner.googleapis.com", "metadata": { "availableRegions": "us-central1,us-east2" } }
              "domain": "A String", # The logical grouping to which the "reason" belongs. The error domain is typically the registered service name of the tool or product that generates the error. Example: "pubsub.googleapis.com". If the error is generated by some common infrastructure, the error domain must be a globally unique value that identifies the infrastructure. For Google API infrastructure, the error domain is "googleapis.com".
              "metadatas": { # Additional structured details about this error. Keys should match /[a-zA-Z0-9-_]/ and be limited to 64 characters in length. When identifying the current value of an exceeded limit, the units should be contained in the key, not the value. For example, rather than {"instanceLimit": "100/request"}, should be returned as, {"instanceLimitPerRequest": "100"}, if the client exceeds the number of instances that can be created in a single (batch) request.
                "a_key": "A String",
              },
              "reason": "A String", # The reason of the error. This is a constant value that identifies the proximate cause of the error. Error reasons are unique within a particular domain of errors. This should be at most 63 characters and match a regular expression of `A-Z+[A-Z0-9]`, which represents UPPER_SNAKE_CASE.
            },
            "help": { # Provides links to documentation or for performing an out of band action. For example, if a quota check failed with an error indicating the calling project hasn't enabled the accessed service, this can contain a URL pointing directly to the right place in the developer console to flip the bit.
              "links": [ # URL(s) pointing to additional information on handling the current error.
                { # Describes a URL link.
                  "description": "A String", # Describes what the link offers.
                  "url": "A String", # The URL of the link.
                },
              ],
            },
            "localizedMessage": { # Provides a localized error message that is safe to return to the user which can be attached to an RPC error.
              "locale": "A String", # The locale used following the specification defined at https://www.rfc-editor.org/rfc/bcp/bcp47.txt. Examples are: "en-US", "fr-CH", "es-MX"
              "message": "A String", # The localized error message in the above locale.
            },
            "quotaInfo": { # Additional details for quota exceeded error for resource quota.
              "dimensions": { # The map holding related quota dimensions.
                "a_key": "A String",
              },
              "futureLimit": 3.14, # Future quota limit being rolled out. The limit's unit depends on the quota type or metric.
              "limit": 3.14, # Current effective quota limit. The limit's unit depends on the quota type or metric.
              "limitName": "A String", # The name of the quota limit.
              "metricName": "A String", # The Compute Engine quota metric name.
              "rolloutStatus": "A String", # Rollout status of the future quota limit.
            },
          },
        ],
        "location": "A String", # [Output Only] Indicates the field in the request that caused the error. This property is optional.
        "message": "A String", # [Output Only] An optional, human-readable error message.
      },
    ],
  },
  "httpErrorMessage": "A String", # [Output Only] If the operation fails, this field contains the HTTP error message that was returned, such as `NOT FOUND`.
  "httpErrorStatusCode": 42, # [Output Only] If the operation fails, this field contains the HTTP error status code that was returned. For example, a `404` means the resource was not found.
  "id": "A String", # [Output Only] The unique identifier for the operation. This identifier is defined by the server.
  "insertTime": "A String", # [Output Only] The time that this operation was requested. This value is in RFC3339 text format.
  "instancesBulkInsertOperationMetadata": {
    "perLocationStatus": { # Status information per location (location name is key). Example key: zones/us-central1-a
      "a_key": {
        "createdVmCount": 42, # [Output Only] Count of VMs successfully created so far.
        "deletedVmCount": 42, # [Output Only] Count of VMs that got deleted during rollback.
        "failedToCreateVmCount": 42, # [Output Only] Count of VMs that started creating but encountered an error.
        "status": "A String", # [Output Only] Creation status of BulkInsert operation - information if the flow is rolling forward or rolling back.
        "targetVmCount": 42, # [Output Only] Count of VMs originally planned to be created.
      },
    },
  },
  "kind": "compute#operation", # [Output Only] Type of the resource. Always `compute#operation` for Operation resources.
  "name": "A String", # [Output Only] Name of the operation.
  "operationGroupId": "A String", # [Output Only] An ID that represents a group of operations, such as when a group of operations results from a `bulkInsert` API request.
  "operationType": "A String", # [Output Only] The type of operation, such as `insert`, `update`, or `delete`, and so on.
  "progress": 42, # [Output Only] An optional progress indicator that ranges from 0 to 100. There is no requirement that this be linear or support any granularity of operations. This should not be used to guess when the operation will be complete. This number should monotonically increase as the operation progresses.
  "region": "A String", # [Output Only] The URL of the region where the operation resides. Only applicable when performing regional operations.
  "selfLink": "A String", # [Output Only] Server-defined URL for the resource.
  "selfLinkWithId": "A String", # [Output Only] Server-defined URL for this resource with the resource id.
  "setCommonInstanceMetadataOperationMetadata": { # [Output Only] If the operation is for projects.setCommonInstanceMetadata, this field will contain information on all underlying zonal actions and their state.
    "clientOperationId": "A String", # [Output Only] The client operation id.
    "perLocationOperations": { # [Output Only] Status information per location (location name is key). Example key: zones/us-central1-a
      "a_key": {
        "error": { # The `Status` type defines a logical error model that is suitable for different programming environments, including REST APIs and RPC APIs. It is used by [gRPC](https://github.com/grpc). Each `Status` message contains three pieces of data: error code, error message, and error details. You can find out more about this error model and how to work with it in the [API Design Guide](https://cloud.google.com/apis/design/errors). # [Output Only] If state is `ABANDONED` or `FAILED`, this field is populated.
          "code": 42, # The status code, which should be an enum value of google.rpc.Code.
          "details": [ # A list of messages that carry the error details. There is a common set of message types for APIs to use.
            {
              "a_key": "", # Properties of the object. Contains field @type with type URL.
            },
          ],
          "message": "A String", # A developer-facing error message, which should be in English. Any user-facing error message should be localized and sent in the google.rpc.Status.details field, or localized by the client.
        },
        "state": "A String", # [Output Only] Status of the action, which can be one of the following: `PROPAGATING`, `PROPAGATED`, `ABANDONED`, `FAILED`, or `DONE`.
      },
    },
  },
  "startTime": "A String", # [Output Only] The time that this operation was started by the server. This value is in RFC3339 text format.
  "status": "A String", # [Output Only] The status of the operation, which can be one of the following: `PENDING`, `RUNNING`, or `DONE`.
  "statusMessage": "A String", # [Output Only] An optional textual description of the current status of the operation.
  "targetId": "A String", # [Output Only] The unique target ID, which identifies a specific incarnation of the target resource.
  "targetLink": "A String", # [Output Only] The URL of the resource that the operation modifies. For operations related to creating a snapshot, this points to the persistent disk that the snapshot was created from.
  "user": "A String", # [Output Only] User who requested the operation, for example: `user@example.com` or `alice_smith_identifier (global/workforcePools/example-com-us-employees)`.
  "warnings": [ # [Output Only] If warning messages are generated during processing of the operation, this field will be populated.
    {
      "code": "A String", # [Output Only] A warning code, if applicable. For example, Compute Engine returns NO_RESULTS_ON_PAGE if there are no results in the response.
      "data": [ # [Output Only] Metadata about this warning in key: value format. For example: "data": [ { "key": "scope", "value": "zones/us-east1-d" }
        {
          "key": "A String", # [Output Only] A key that provides more detail on the warning being returned. For example, for warnings where there are no results in a list request for a particular zone, this key might be scope and the key value might be the zone name. Other examples might be a key indicating a deprecated resource and a suggested replacement, or a warning about invalid network settings (for example, if an instance attempts to perform IP forwarding but is not enabled for IP forwarding).
          "value": "A String", # [Output Only] A warning data value corresponding to the key.
        },
      ],
      "message": "A String", # [Output Only] A human-readable description of the warning code.
    },
  ],
  "zone": "A String", # [Output Only] The URL of the zone where the operation resides. Only applicable when performing per-zone operations.
}