Compute Engine API . regionNetworkEndpointGroups

Instance Methods

attachNetworkEndpoints(project, region, networkEndpointGroup, body=None, requestId=None, x__xgafv=None)

Attach a list of network endpoints to the specified network endpoint group.

close()

Close httplib2 connections.

delete(project, region, networkEndpointGroup, requestId=None, x__xgafv=None)

Deletes the specified network endpoint group. Note that the NEG cannot be deleted if it is configured as a backend of a backend service.

detachNetworkEndpoints(project, region, networkEndpointGroup, body=None, requestId=None, x__xgafv=None)

Detach the network endpoint from the specified network endpoint group.

get(project, region, networkEndpointGroup, x__xgafv=None)

Returns the specified network endpoint group.

insert(project, region, body=None, requestId=None, x__xgafv=None)

Creates a network endpoint group in the specified project using the parameters that are included in the request.

list(project, region, filter=None, maxResults=None, orderBy=None, pageToken=None, returnPartialSuccess=None, x__xgafv=None)

Retrieves the list of regional network endpoint groups available to the specified project in the given region.

listNetworkEndpoints(project, region, networkEndpointGroup, filter=None, maxResults=None, orderBy=None, pageToken=None, returnPartialSuccess=None, x__xgafv=None)

Lists the network endpoints in the specified network endpoint group.

listNetworkEndpoints_next()

Retrieves the next page of results.

list_next()

Retrieves the next page of results.

Method Details

attachNetworkEndpoints(project, region, networkEndpointGroup, body=None, requestId=None, x__xgafv=None)
Attach a list of network endpoints to the specified network endpoint group.

Args:
  project: string, Project ID for this request. (required)
  region: string, The name of the region where you want to create the network endpoint group. It should comply with RFC1035. (required)
  networkEndpointGroup: string, The name of the network endpoint group where you are attaching network endpoints to. It should comply with RFC1035. (required)
  body: object, The request body.
    The object takes the form of:

{
  "networkEndpoints": [ # The list of network endpoints to be attached.
    { # The network endpoint.
      "annotations": { # Metadata defined as annotations on the network endpoint.
        "a_key": "A String",
      },
      "clientPort": 42, # Represents the port number to which PSC consumer sends packets. Only valid for network endpoint groups created with CLIENT_PORT_PER_ENDPOINT mapping mode.
      "fqdn": "A String", # Optional fully qualified domain name of network endpoint. This can only be specified when NetworkEndpointGroup.network_endpoint_type is NON_GCP_FQDN_PORT.
      "instance": "A String", # The name or a URL of VM instance of this network endpoint. This field is required for network endpoints of type GCE_VM_IP and GCE_VM_IP_PORT. The instance must be in the same zone of network endpoint group (for zonal NEGs) or in the zone within the region of the NEG (for regional NEGs). If the ipAddress is specified, it must belongs to the VM instance. The name must be 1-63 characters long, and comply with RFC1035 or be a valid URL pointing to an existing instance.
      "ipAddress": "A String", # Optional IPv4 address of network endpoint. The IP address must belong to a VM in Compute Engine (either the primary IP or as part of an aliased IP range). If the IP address is not specified, then the primary IP address for the VM instance in the network that the network endpoint group belongs to will be used. This field is redundant and need not be set for network endpoints of type GCE_VM_IP. If set, it must be set to the primary internal IP address of the attached VM instance that matches the subnetwork of the NEG. The primary internal IP address from any NIC of a multi-NIC VM instance can be added to a NEG as long as it matches the NEG subnetwork.
      "ipv6Address": "A String", # Optional IPv6 address of network endpoint.
      "port": 42, # Optional port number of network endpoint. If not specified, the defaultPort for the network endpoint group will be used. This field can not be set for network endpoints of type GCE_VM_IP.
    },
  ],
}

  requestId: string, An optional request ID to identify requests. Specify a unique request ID so that if you must retry your request, the server will know to ignore the request if it has already been completed. For example, consider a situation where you make an initial request and the request times out. If you make the request again with the same request ID, the server can check if original operation with the same request ID was received, and if so, will ignore the second request. This prevents clients from accidentally creating duplicate commitments. The request ID must be a valid UUID with the exception that zero UUID is not supported ( 00000000-0000-0000-0000-000000000000).
  x__xgafv: string, V1 error format.
    Allowed values
      1 - v1 error format
      2 - v2 error format

Returns:
  An object of the form:

    { # Represents an Operation resource. Google Compute Engine has three Operation resources: * [Global](/compute/docs/reference/rest/beta/globalOperations) * [Regional](/compute/docs/reference/rest/beta/regionOperations) * [Zonal](/compute/docs/reference/rest/beta/zoneOperations) You can use an operation resource to manage asynchronous API requests. For more information, read Handling API responses. Operations can be global, regional or zonal. - For global operations, use the `globalOperations` resource. - For regional operations, use the `regionOperations` resource. - For zonal operations, use the `zoneOperations` resource. For more information, read Global, Regional, and Zonal Resources. Note that completed Operation resources have a limited retention period.
  "clientOperationId": "A String", # [Output Only] The value of `requestId` if you provided it in the request. Not present otherwise.
  "creationTimestamp": "A String", # [Deprecated] This field is deprecated.
  "description": "A String", # [Output Only] A textual description of the operation, which is set when the operation is created.
  "endTime": "A String", # [Output Only] The time that this operation was completed. This value is in RFC3339 text format.
  "error": { # [Output Only] If errors are generated during processing of the operation, this field will be populated.
    "errors": [ # [Output Only] The array of errors encountered while processing this operation.
      {
        "code": "A String", # [Output Only] The error type identifier for this error.
        "errorDetails": [ # [Output Only] An optional list of messages that contain the error details. There is a set of defined message types to use for providing details.The syntax depends on the error code. For example, QuotaExceededInfo will have details when the error code is QUOTA_EXCEEDED.
          {
            "errorInfo": { # Describes the cause of the error with structured details. Example of an error when contacting the "pubsub.googleapis.com" API when it is not enabled: { "reason": "API_DISABLED" "domain": "googleapis.com" "metadata": { "resource": "projects/123", "service": "pubsub.googleapis.com" } } This response indicates that the pubsub.googleapis.com API is not enabled. Example of an error that is returned when attempting to create a Spanner instance in a region that is out of stock: { "reason": "STOCKOUT" "domain": "spanner.googleapis.com", "metadata": { "availableRegions": "us-central1,us-east2" } }
              "domain": "A String", # The logical grouping to which the "reason" belongs. The error domain is typically the registered service name of the tool or product that generates the error. Example: "pubsub.googleapis.com". If the error is generated by some common infrastructure, the error domain must be a globally unique value that identifies the infrastructure. For Google API infrastructure, the error domain is "googleapis.com".
              "metadatas": { # Additional structured details about this error. Keys should match /[a-zA-Z0-9-_]/ and be limited to 64 characters in length. When identifying the current value of an exceeded limit, the units should be contained in the key, not the value. For example, rather than {"instanceLimit": "100/request"}, should be returned as, {"instanceLimitPerRequest": "100"}, if the client exceeds the number of instances that can be created in a single (batch) request.
                "a_key": "A String",
              },
              "reason": "A String", # The reason of the error. This is a constant value that identifies the proximate cause of the error. Error reasons are unique within a particular domain of errors. This should be at most 63 characters and match a regular expression of `A-Z+[A-Z0-9]`, which represents UPPER_SNAKE_CASE.
            },
            "help": { # Provides links to documentation or for performing an out of band action. For example, if a quota check failed with an error indicating the calling project hasn't enabled the accessed service, this can contain a URL pointing directly to the right place in the developer console to flip the bit.
              "links": [ # URL(s) pointing to additional information on handling the current error.
                { # Describes a URL link.
                  "description": "A String", # Describes what the link offers.
                  "url": "A String", # The URL of the link.
                },
              ],
            },
            "localizedMessage": { # Provides a localized error message that is safe to return to the user which can be attached to an RPC error.
              "locale": "A String", # The locale used following the specification defined at https://www.rfc-editor.org/rfc/bcp/bcp47.txt. Examples are: "en-US", "fr-CH", "es-MX"
              "message": "A String", # The localized error message in the above locale.
            },
            "quotaInfo": { # Additional details for quota exceeded error for resource quota.
              "dimensions": { # The map holding related quota dimensions.
                "a_key": "A String",
              },
              "futureLimit": 3.14, # Future quota limit being rolled out. The limit's unit depends on the quota type or metric.
              "limit": 3.14, # Current effective quota limit. The limit's unit depends on the quota type or metric.
              "limitName": "A String", # The name of the quota limit.
              "metricName": "A String", # The Compute Engine quota metric name.
              "rolloutStatus": "A String", # Rollout status of the future quota limit.
            },
          },
        ],
        "location": "A String", # [Output Only] Indicates the field in the request that caused the error. This property is optional.
        "message": "A String", # [Output Only] An optional, human-readable error message.
      },
    ],
  },
  "httpErrorMessage": "A String", # [Output Only] If the operation fails, this field contains the HTTP error message that was returned, such as `NOT FOUND`.
  "httpErrorStatusCode": 42, # [Output Only] If the operation fails, this field contains the HTTP error status code that was returned. For example, a `404` means the resource was not found.
  "id": "A String", # [Output Only] The unique identifier for the operation. This identifier is defined by the server.
  "insertTime": "A String", # [Output Only] The time that this operation was requested. This value is in RFC3339 text format.
  "instancesBulkInsertOperationMetadata": {
    "perLocationStatus": { # Status information per location (location name is key). Example key: zones/us-central1-a
      "a_key": {
        "createdVmCount": 42, # [Output Only] Count of VMs successfully created so far.
        "deletedVmCount": 42, # [Output Only] Count of VMs that got deleted during rollback.
        "failedToCreateVmCount": 42, # [Output Only] Count of VMs that started creating but encountered an error.
        "status": "A String", # [Output Only] Creation status of BulkInsert operation - information if the flow is rolling forward or rolling back.
        "targetVmCount": 42, # [Output Only] Count of VMs originally planned to be created.
      },
    },
  },
  "kind": "compute#operation", # [Output Only] Type of the resource. Always `compute#operation` for Operation resources.
  "name": "A String", # [Output Only] Name of the operation.
  "operationGroupId": "A String", # [Output Only] An ID that represents a group of operations, such as when a group of operations results from a `bulkInsert` API request.
  "operationType": "A String", # [Output Only] The type of operation, such as `insert`, `update`, or `delete`, and so on.
  "progress": 42, # [Output Only] An optional progress indicator that ranges from 0 to 100. There is no requirement that this be linear or support any granularity of operations. This should not be used to guess when the operation will be complete. This number should monotonically increase as the operation progresses.
  "region": "A String", # [Output Only] The URL of the region where the operation resides. Only applicable when performing regional operations.
  "selfLink": "A String", # [Output Only] Server-defined URL for the resource.
  "setCommonInstanceMetadataOperationMetadata": { # [Output Only] If the operation is for projects.setCommonInstanceMetadata, this field will contain information on all underlying zonal actions and their state.
    "clientOperationId": "A String", # [Output Only] The client operation id.
    "perLocationOperations": { # [Output Only] Status information per location (location name is key). Example key: zones/us-central1-a
      "a_key": {
        "error": { # The `Status` type defines a logical error model that is suitable for different programming environments, including REST APIs and RPC APIs. It is used by [gRPC](https://github.com/grpc). Each `Status` message contains three pieces of data: error code, error message, and error details. You can find out more about this error model and how to work with it in the [API Design Guide](https://cloud.google.com/apis/design/errors). # [Output Only] If state is `ABANDONED` or `FAILED`, this field is populated.
          "code": 42, # The status code, which should be an enum value of google.rpc.Code.
          "details": [ # A list of messages that carry the error details. There is a common set of message types for APIs to use.
            {
              "a_key": "", # Properties of the object. Contains field @type with type URL.
            },
          ],
          "message": "A String", # A developer-facing error message, which should be in English. Any user-facing error message should be localized and sent in the google.rpc.Status.details field, or localized by the client.
        },
        "state": "A String", # [Output Only] Status of the action, which can be one of the following: `PROPAGATING`, `PROPAGATED`, `ABANDONED`, `FAILED`, or `DONE`.
      },
    },
  },
  "startTime": "A String", # [Output Only] The time that this operation was started by the server. This value is in RFC3339 text format.
  "status": "A String", # [Output Only] The status of the operation, which can be one of the following: `PENDING`, `RUNNING`, or `DONE`.
  "statusMessage": "A String", # [Output Only] An optional textual description of the current status of the operation.
  "targetId": "A String", # [Output Only] The unique target ID, which identifies a specific incarnation of the target resource.
  "targetLink": "A String", # [Output Only] The URL of the resource that the operation modifies. For operations related to creating a snapshot, this points to the persistent disk that the snapshot was created from.
  "user": "A String", # [Output Only] User who requested the operation, for example: `user@example.com` or `alice_smith_identifier (global/workforcePools/example-com-us-employees)`.
  "warnings": [ # [Output Only] If warning messages are generated during processing of the operation, this field will be populated.
    {
      "code": "A String", # [Output Only] A warning code, if applicable. For example, Compute Engine returns NO_RESULTS_ON_PAGE if there are no results in the response.
      "data": [ # [Output Only] Metadata about this warning in key: value format. For example: "data": [ { "key": "scope", "value": "zones/us-east1-d" }
        {
          "key": "A String", # [Output Only] A key that provides more detail on the warning being returned. For example, for warnings where there are no results in a list request for a particular zone, this key might be scope and the key value might be the zone name. Other examples might be a key indicating a deprecated resource and a suggested replacement, or a warning about invalid network settings (for example, if an instance attempts to perform IP forwarding but is not enabled for IP forwarding).
          "value": "A String", # [Output Only] A warning data value corresponding to the key.
        },
      ],
      "message": "A String", # [Output Only] A human-readable description of the warning code.
    },
  ],
  "zone": "A String", # [Output Only] The URL of the zone where the operation resides. Only applicable when performing per-zone operations.
}
close()
Close httplib2 connections.
delete(project, region, networkEndpointGroup, requestId=None, x__xgafv=None)
Deletes the specified network endpoint group. Note that the NEG cannot be deleted if it is configured as a backend of a backend service.

Args:
  project: string, Project ID for this request. (required)
  region: string, The name of the region where the network endpoint group is located. It should comply with RFC1035. (required)
  networkEndpointGroup: string, The name of the network endpoint group to delete. It should comply with RFC1035. (required)
  requestId: string, An optional request ID to identify requests. Specify a unique request ID so that if you must retry your request, the server will know to ignore the request if it has already been completed. For example, consider a situation where you make an initial request and the request times out. If you make the request again with the same request ID, the server can check if original operation with the same request ID was received, and if so, will ignore the second request. This prevents clients from accidentally creating duplicate commitments. The request ID must be a valid UUID with the exception that zero UUID is not supported ( 00000000-0000-0000-0000-000000000000).
  x__xgafv: string, V1 error format.
    Allowed values
      1 - v1 error format
      2 - v2 error format

Returns:
  An object of the form:

    { # Represents an Operation resource. Google Compute Engine has three Operation resources: * [Global](/compute/docs/reference/rest/beta/globalOperations) * [Regional](/compute/docs/reference/rest/beta/regionOperations) * [Zonal](/compute/docs/reference/rest/beta/zoneOperations) You can use an operation resource to manage asynchronous API requests. For more information, read Handling API responses. Operations can be global, regional or zonal. - For global operations, use the `globalOperations` resource. - For regional operations, use the `regionOperations` resource. - For zonal operations, use the `zoneOperations` resource. For more information, read Global, Regional, and Zonal Resources. Note that completed Operation resources have a limited retention period.
  "clientOperationId": "A String", # [Output Only] The value of `requestId` if you provided it in the request. Not present otherwise.
  "creationTimestamp": "A String", # [Deprecated] This field is deprecated.
  "description": "A String", # [Output Only] A textual description of the operation, which is set when the operation is created.
  "endTime": "A String", # [Output Only] The time that this operation was completed. This value is in RFC3339 text format.
  "error": { # [Output Only] If errors are generated during processing of the operation, this field will be populated.
    "errors": [ # [Output Only] The array of errors encountered while processing this operation.
      {
        "code": "A String", # [Output Only] The error type identifier for this error.
        "errorDetails": [ # [Output Only] An optional list of messages that contain the error details. There is a set of defined message types to use for providing details.The syntax depends on the error code. For example, QuotaExceededInfo will have details when the error code is QUOTA_EXCEEDED.
          {
            "errorInfo": { # Describes the cause of the error with structured details. Example of an error when contacting the "pubsub.googleapis.com" API when it is not enabled: { "reason": "API_DISABLED" "domain": "googleapis.com" "metadata": { "resource": "projects/123", "service": "pubsub.googleapis.com" } } This response indicates that the pubsub.googleapis.com API is not enabled. Example of an error that is returned when attempting to create a Spanner instance in a region that is out of stock: { "reason": "STOCKOUT" "domain": "spanner.googleapis.com", "metadata": { "availableRegions": "us-central1,us-east2" } }
              "domain": "A String", # The logical grouping to which the "reason" belongs. The error domain is typically the registered service name of the tool or product that generates the error. Example: "pubsub.googleapis.com". If the error is generated by some common infrastructure, the error domain must be a globally unique value that identifies the infrastructure. For Google API infrastructure, the error domain is "googleapis.com".
              "metadatas": { # Additional structured details about this error. Keys should match /[a-zA-Z0-9-_]/ and be limited to 64 characters in length. When identifying the current value of an exceeded limit, the units should be contained in the key, not the value. For example, rather than {"instanceLimit": "100/request"}, should be returned as, {"instanceLimitPerRequest": "100"}, if the client exceeds the number of instances that can be created in a single (batch) request.
                "a_key": "A String",
              },
              "reason": "A String", # The reason of the error. This is a constant value that identifies the proximate cause of the error. Error reasons are unique within a particular domain of errors. This should be at most 63 characters and match a regular expression of `A-Z+[A-Z0-9]`, which represents UPPER_SNAKE_CASE.
            },
            "help": { # Provides links to documentation or for performing an out of band action. For example, if a quota check failed with an error indicating the calling project hasn't enabled the accessed service, this can contain a URL pointing directly to the right place in the developer console to flip the bit.
              "links": [ # URL(s) pointing to additional information on handling the current error.
                { # Describes a URL link.
                  "description": "A String", # Describes what the link offers.
                  "url": "A String", # The URL of the link.
                },
              ],
            },
            "localizedMessage": { # Provides a localized error message that is safe to return to the user which can be attached to an RPC error.
              "locale": "A String", # The locale used following the specification defined at https://www.rfc-editor.org/rfc/bcp/bcp47.txt. Examples are: "en-US", "fr-CH", "es-MX"
              "message": "A String", # The localized error message in the above locale.
            },
            "quotaInfo": { # Additional details for quota exceeded error for resource quota.
              "dimensions": { # The map holding related quota dimensions.
                "a_key": "A String",
              },
              "futureLimit": 3.14, # Future quota limit being rolled out. The limit's unit depends on the quota type or metric.
              "limit": 3.14, # Current effective quota limit. The limit's unit depends on the quota type or metric.
              "limitName": "A String", # The name of the quota limit.
              "metricName": "A String", # The Compute Engine quota metric name.
              "rolloutStatus": "A String", # Rollout status of the future quota limit.
            },
          },
        ],
        "location": "A String", # [Output Only] Indicates the field in the request that caused the error. This property is optional.
        "message": "A String", # [Output Only] An optional, human-readable error message.
      },
    ],
  },
  "httpErrorMessage": "A String", # [Output Only] If the operation fails, this field contains the HTTP error message that was returned, such as `NOT FOUND`.
  "httpErrorStatusCode": 42, # [Output Only] If the operation fails, this field contains the HTTP error status code that was returned. For example, a `404` means the resource was not found.
  "id": "A String", # [Output Only] The unique identifier for the operation. This identifier is defined by the server.
  "insertTime": "A String", # [Output Only] The time that this operation was requested. This value is in RFC3339 text format.
  "instancesBulkInsertOperationMetadata": {
    "perLocationStatus": { # Status information per location (location name is key). Example key: zones/us-central1-a
      "a_key": {
        "createdVmCount": 42, # [Output Only] Count of VMs successfully created so far.
        "deletedVmCount": 42, # [Output Only] Count of VMs that got deleted during rollback.
        "failedToCreateVmCount": 42, # [Output Only] Count of VMs that started creating but encountered an error.
        "status": "A String", # [Output Only] Creation status of BulkInsert operation - information if the flow is rolling forward or rolling back.
        "targetVmCount": 42, # [Output Only] Count of VMs originally planned to be created.
      },
    },
  },
  "kind": "compute#operation", # [Output Only] Type of the resource. Always `compute#operation` for Operation resources.
  "name": "A String", # [Output Only] Name of the operation.
  "operationGroupId": "A String", # [Output Only] An ID that represents a group of operations, such as when a group of operations results from a `bulkInsert` API request.
  "operationType": "A String", # [Output Only] The type of operation, such as `insert`, `update`, or `delete`, and so on.
  "progress": 42, # [Output Only] An optional progress indicator that ranges from 0 to 100. There is no requirement that this be linear or support any granularity of operations. This should not be used to guess when the operation will be complete. This number should monotonically increase as the operation progresses.
  "region": "A String", # [Output Only] The URL of the region where the operation resides. Only applicable when performing regional operations.
  "selfLink": "A String", # [Output Only] Server-defined URL for the resource.
  "setCommonInstanceMetadataOperationMetadata": { # [Output Only] If the operation is for projects.setCommonInstanceMetadata, this field will contain information on all underlying zonal actions and their state.
    "clientOperationId": "A String", # [Output Only] The client operation id.
    "perLocationOperations": { # [Output Only] Status information per location (location name is key). Example key: zones/us-central1-a
      "a_key": {
        "error": { # The `Status` type defines a logical error model that is suitable for different programming environments, including REST APIs and RPC APIs. It is used by [gRPC](https://github.com/grpc). Each `Status` message contains three pieces of data: error code, error message, and error details. You can find out more about this error model and how to work with it in the [API Design Guide](https://cloud.google.com/apis/design/errors). # [Output Only] If state is `ABANDONED` or `FAILED`, this field is populated.
          "code": 42, # The status code, which should be an enum value of google.rpc.Code.
          "details": [ # A list of messages that carry the error details. There is a common set of message types for APIs to use.
            {
              "a_key": "", # Properties of the object. Contains field @type with type URL.
            },
          ],
          "message": "A String", # A developer-facing error message, which should be in English. Any user-facing error message should be localized and sent in the google.rpc.Status.details field, or localized by the client.
        },
        "state": "A String", # [Output Only] Status of the action, which can be one of the following: `PROPAGATING`, `PROPAGATED`, `ABANDONED`, `FAILED`, or `DONE`.
      },
    },
  },
  "startTime": "A String", # [Output Only] The time that this operation was started by the server. This value is in RFC3339 text format.
  "status": "A String", # [Output Only] The status of the operation, which can be one of the following: `PENDING`, `RUNNING`, or `DONE`.
  "statusMessage": "A String", # [Output Only] An optional textual description of the current status of the operation.
  "targetId": "A String", # [Output Only] The unique target ID, which identifies a specific incarnation of the target resource.
  "targetLink": "A String", # [Output Only] The URL of the resource that the operation modifies. For operations related to creating a snapshot, this points to the persistent disk that the snapshot was created from.
  "user": "A String", # [Output Only] User who requested the operation, for example: `user@example.com` or `alice_smith_identifier (global/workforcePools/example-com-us-employees)`.
  "warnings": [ # [Output Only] If warning messages are generated during processing of the operation, this field will be populated.
    {
      "code": "A String", # [Output Only] A warning code, if applicable. For example, Compute Engine returns NO_RESULTS_ON_PAGE if there are no results in the response.
      "data": [ # [Output Only] Metadata about this warning in key: value format. For example: "data": [ { "key": "scope", "value": "zones/us-east1-d" }
        {
          "key": "A String", # [Output Only] A key that provides more detail on the warning being returned. For example, for warnings where there are no results in a list request for a particular zone, this key might be scope and the key value might be the zone name. Other examples might be a key indicating a deprecated resource and a suggested replacement, or a warning about invalid network settings (for example, if an instance attempts to perform IP forwarding but is not enabled for IP forwarding).
          "value": "A String", # [Output Only] A warning data value corresponding to the key.
        },
      ],
      "message": "A String", # [Output Only] A human-readable description of the warning code.
    },
  ],
  "zone": "A String", # [Output Only] The URL of the zone where the operation resides. Only applicable when performing per-zone operations.
}
detachNetworkEndpoints(project, region, networkEndpointGroup, body=None, requestId=None, x__xgafv=None)
Detach the network endpoint from the specified network endpoint group.

Args:
  project: string, Project ID for this request. (required)
  region: string, The name of the region where the network endpoint group is located. It should comply with RFC1035. (required)
  networkEndpointGroup: string, The name of the network endpoint group you are detaching network endpoints from. It should comply with RFC1035. (required)
  body: object, The request body.
    The object takes the form of:

{
  "networkEndpoints": [ # The list of network endpoints to be detached.
    { # The network endpoint.
      "annotations": { # Metadata defined as annotations on the network endpoint.
        "a_key": "A String",
      },
      "clientPort": 42, # Represents the port number to which PSC consumer sends packets. Only valid for network endpoint groups created with CLIENT_PORT_PER_ENDPOINT mapping mode.
      "fqdn": "A String", # Optional fully qualified domain name of network endpoint. This can only be specified when NetworkEndpointGroup.network_endpoint_type is NON_GCP_FQDN_PORT.
      "instance": "A String", # The name or a URL of VM instance of this network endpoint. This field is required for network endpoints of type GCE_VM_IP and GCE_VM_IP_PORT. The instance must be in the same zone of network endpoint group (for zonal NEGs) or in the zone within the region of the NEG (for regional NEGs). If the ipAddress is specified, it must belongs to the VM instance. The name must be 1-63 characters long, and comply with RFC1035 or be a valid URL pointing to an existing instance.
      "ipAddress": "A String", # Optional IPv4 address of network endpoint. The IP address must belong to a VM in Compute Engine (either the primary IP or as part of an aliased IP range). If the IP address is not specified, then the primary IP address for the VM instance in the network that the network endpoint group belongs to will be used. This field is redundant and need not be set for network endpoints of type GCE_VM_IP. If set, it must be set to the primary internal IP address of the attached VM instance that matches the subnetwork of the NEG. The primary internal IP address from any NIC of a multi-NIC VM instance can be added to a NEG as long as it matches the NEG subnetwork.
      "ipv6Address": "A String", # Optional IPv6 address of network endpoint.
      "port": 42, # Optional port number of network endpoint. If not specified, the defaultPort for the network endpoint group will be used. This field can not be set for network endpoints of type GCE_VM_IP.
    },
  ],
}

  requestId: string, An optional request ID to identify requests. Specify a unique request ID so that if you must retry your request, the server will know to ignore the request if it has already been completed. For example, consider a situation where you make an initial request and the request times out. If you make the request again with the same request ID, the server can check if original operation with the same request ID was received, and if so, will ignore the second request. This prevents clients from accidentally creating duplicate commitments. The request ID must be a valid UUID with the exception that zero UUID is not supported ( 00000000-0000-0000-0000-000000000000). end_interface: MixerMutationRequestBuilder
  x__xgafv: string, V1 error format.
    Allowed values
      1 - v1 error format
      2 - v2 error format

Returns:
  An object of the form:

    { # Represents an Operation resource. Google Compute Engine has three Operation resources: * [Global](/compute/docs/reference/rest/beta/globalOperations) * [Regional](/compute/docs/reference/rest/beta/regionOperations) * [Zonal](/compute/docs/reference/rest/beta/zoneOperations) You can use an operation resource to manage asynchronous API requests. For more information, read Handling API responses. Operations can be global, regional or zonal. - For global operations, use the `globalOperations` resource. - For regional operations, use the `regionOperations` resource. - For zonal operations, use the `zoneOperations` resource. For more information, read Global, Regional, and Zonal Resources. Note that completed Operation resources have a limited retention period.
  "clientOperationId": "A String", # [Output Only] The value of `requestId` if you provided it in the request. Not present otherwise.
  "creationTimestamp": "A String", # [Deprecated] This field is deprecated.
  "description": "A String", # [Output Only] A textual description of the operation, which is set when the operation is created.
  "endTime": "A String", # [Output Only] The time that this operation was completed. This value is in RFC3339 text format.
  "error": { # [Output Only] If errors are generated during processing of the operation, this field will be populated.
    "errors": [ # [Output Only] The array of errors encountered while processing this operation.
      {
        "code": "A String", # [Output Only] The error type identifier for this error.
        "errorDetails": [ # [Output Only] An optional list of messages that contain the error details. There is a set of defined message types to use for providing details.The syntax depends on the error code. For example, QuotaExceededInfo will have details when the error code is QUOTA_EXCEEDED.
          {
            "errorInfo": { # Describes the cause of the error with structured details. Example of an error when contacting the "pubsub.googleapis.com" API when it is not enabled: { "reason": "API_DISABLED" "domain": "googleapis.com" "metadata": { "resource": "projects/123", "service": "pubsub.googleapis.com" } } This response indicates that the pubsub.googleapis.com API is not enabled. Example of an error that is returned when attempting to create a Spanner instance in a region that is out of stock: { "reason": "STOCKOUT" "domain": "spanner.googleapis.com", "metadata": { "availableRegions": "us-central1,us-east2" } }
              "domain": "A String", # The logical grouping to which the "reason" belongs. The error domain is typically the registered service name of the tool or product that generates the error. Example: "pubsub.googleapis.com". If the error is generated by some common infrastructure, the error domain must be a globally unique value that identifies the infrastructure. For Google API infrastructure, the error domain is "googleapis.com".
              "metadatas": { # Additional structured details about this error. Keys should match /[a-zA-Z0-9-_]/ and be limited to 64 characters in length. When identifying the current value of an exceeded limit, the units should be contained in the key, not the value. For example, rather than {"instanceLimit": "100/request"}, should be returned as, {"instanceLimitPerRequest": "100"}, if the client exceeds the number of instances that can be created in a single (batch) request.
                "a_key": "A String",
              },
              "reason": "A String", # The reason of the error. This is a constant value that identifies the proximate cause of the error. Error reasons are unique within a particular domain of errors. This should be at most 63 characters and match a regular expression of `A-Z+[A-Z0-9]`, which represents UPPER_SNAKE_CASE.
            },
            "help": { # Provides links to documentation or for performing an out of band action. For example, if a quota check failed with an error indicating the calling project hasn't enabled the accessed service, this can contain a URL pointing directly to the right place in the developer console to flip the bit.
              "links": [ # URL(s) pointing to additional information on handling the current error.
                { # Describes a URL link.
                  "description": "A String", # Describes what the link offers.
                  "url": "A String", # The URL of the link.
                },
              ],
            },
            "localizedMessage": { # Provides a localized error message that is safe to return to the user which can be attached to an RPC error.
              "locale": "A String", # The locale used following the specification defined at https://www.rfc-editor.org/rfc/bcp/bcp47.txt. Examples are: "en-US", "fr-CH", "es-MX"
              "message": "A String", # The localized error message in the above locale.
            },
            "quotaInfo": { # Additional details for quota exceeded error for resource quota.
              "dimensions": { # The map holding related quota dimensions.
                "a_key": "A String",
              },
              "futureLimit": 3.14, # Future quota limit being rolled out. The limit's unit depends on the quota type or metric.
              "limit": 3.14, # Current effective quota limit. The limit's unit depends on the quota type or metric.
              "limitName": "A String", # The name of the quota limit.
              "metricName": "A String", # The Compute Engine quota metric name.
              "rolloutStatus": "A String", # Rollout status of the future quota limit.
            },
          },
        ],
        "location": "A String", # [Output Only] Indicates the field in the request that caused the error. This property is optional.
        "message": "A String", # [Output Only] An optional, human-readable error message.
      },
    ],
  },
  "httpErrorMessage": "A String", # [Output Only] If the operation fails, this field contains the HTTP error message that was returned, such as `NOT FOUND`.
  "httpErrorStatusCode": 42, # [Output Only] If the operation fails, this field contains the HTTP error status code that was returned. For example, a `404` means the resource was not found.
  "id": "A String", # [Output Only] The unique identifier for the operation. This identifier is defined by the server.
  "insertTime": "A String", # [Output Only] The time that this operation was requested. This value is in RFC3339 text format.
  "instancesBulkInsertOperationMetadata": {
    "perLocationStatus": { # Status information per location (location name is key). Example key: zones/us-central1-a
      "a_key": {
        "createdVmCount": 42, # [Output Only] Count of VMs successfully created so far.
        "deletedVmCount": 42, # [Output Only] Count of VMs that got deleted during rollback.
        "failedToCreateVmCount": 42, # [Output Only] Count of VMs that started creating but encountered an error.
        "status": "A String", # [Output Only] Creation status of BulkInsert operation - information if the flow is rolling forward or rolling back.
        "targetVmCount": 42, # [Output Only] Count of VMs originally planned to be created.
      },
    },
  },
  "kind": "compute#operation", # [Output Only] Type of the resource. Always `compute#operation` for Operation resources.
  "name": "A String", # [Output Only] Name of the operation.
  "operationGroupId": "A String", # [Output Only] An ID that represents a group of operations, such as when a group of operations results from a `bulkInsert` API request.
  "operationType": "A String", # [Output Only] The type of operation, such as `insert`, `update`, or `delete`, and so on.
  "progress": 42, # [Output Only] An optional progress indicator that ranges from 0 to 100. There is no requirement that this be linear or support any granularity of operations. This should not be used to guess when the operation will be complete. This number should monotonically increase as the operation progresses.
  "region": "A String", # [Output Only] The URL of the region where the operation resides. Only applicable when performing regional operations.
  "selfLink": "A String", # [Output Only] Server-defined URL for the resource.
  "setCommonInstanceMetadataOperationMetadata": { # [Output Only] If the operation is for projects.setCommonInstanceMetadata, this field will contain information on all underlying zonal actions and their state.
    "clientOperationId": "A String", # [Output Only] The client operation id.
    "perLocationOperations": { # [Output Only] Status information per location (location name is key). Example key: zones/us-central1-a
      "a_key": {
        "error": { # The `Status` type defines a logical error model that is suitable for different programming environments, including REST APIs and RPC APIs. It is used by [gRPC](https://github.com/grpc). Each `Status` message contains three pieces of data: error code, error message, and error details. You can find out more about this error model and how to work with it in the [API Design Guide](https://cloud.google.com/apis/design/errors). # [Output Only] If state is `ABANDONED` or `FAILED`, this field is populated.
          "code": 42, # The status code, which should be an enum value of google.rpc.Code.
          "details": [ # A list of messages that carry the error details. There is a common set of message types for APIs to use.
            {
              "a_key": "", # Properties of the object. Contains field @type with type URL.
            },
          ],
          "message": "A String", # A developer-facing error message, which should be in English. Any user-facing error message should be localized and sent in the google.rpc.Status.details field, or localized by the client.
        },
        "state": "A String", # [Output Only] Status of the action, which can be one of the following: `PROPAGATING`, `PROPAGATED`, `ABANDONED`, `FAILED`, or `DONE`.
      },
    },
  },
  "startTime": "A String", # [Output Only] The time that this operation was started by the server. This value is in RFC3339 text format.
  "status": "A String", # [Output Only] The status of the operation, which can be one of the following: `PENDING`, `RUNNING`, or `DONE`.
  "statusMessage": "A String", # [Output Only] An optional textual description of the current status of the operation.
  "targetId": "A String", # [Output Only] The unique target ID, which identifies a specific incarnation of the target resource.
  "targetLink": "A String", # [Output Only] The URL of the resource that the operation modifies. For operations related to creating a snapshot, this points to the persistent disk that the snapshot was created from.
  "user": "A String", # [Output Only] User who requested the operation, for example: `user@example.com` or `alice_smith_identifier (global/workforcePools/example-com-us-employees)`.
  "warnings": [ # [Output Only] If warning messages are generated during processing of the operation, this field will be populated.
    {
      "code": "A String", # [Output Only] A warning code, if applicable. For example, Compute Engine returns NO_RESULTS_ON_PAGE if there are no results in the response.
      "data": [ # [Output Only] Metadata about this warning in key: value format. For example: "data": [ { "key": "scope", "value": "zones/us-east1-d" }
        {
          "key": "A String", # [Output Only] A key that provides more detail on the warning being returned. For example, for warnings where there are no results in a list request for a particular zone, this key might be scope and the key value might be the zone name. Other examples might be a key indicating a deprecated resource and a suggested replacement, or a warning about invalid network settings (for example, if an instance attempts to perform IP forwarding but is not enabled for IP forwarding).
          "value": "A String", # [Output Only] A warning data value corresponding to the key.
        },
      ],
      "message": "A String", # [Output Only] A human-readable description of the warning code.
    },
  ],
  "zone": "A String", # [Output Only] The URL of the zone where the operation resides. Only applicable when performing per-zone operations.
}
get(project, region, networkEndpointGroup, x__xgafv=None)
Returns the specified network endpoint group.

Args:
  project: string, Project ID for this request. (required)
  region: string, The name of the region where the network endpoint group is located. It should comply with RFC1035. (required)
  networkEndpointGroup: string, The name of the network endpoint group. It should comply with RFC1035. (required)
  x__xgafv: string, V1 error format.
    Allowed values
      1 - v1 error format
      2 - v2 error format

Returns:
  An object of the form:

    { # Represents a collection of network endpoints. A network endpoint group (NEG) defines how a set of endpoints should be reached, whether they are reachable, and where they are located. For more information about using NEGs for different use cases, see Network endpoint groups overview.
  "annotations": { # Metadata defined as annotations on the network endpoint group.
    "a_key": "A String",
  },
  "appEngine": { # Configuration for an App Engine network endpoint group (NEG). The service is optional, may be provided explicitly or in the URL mask. The version is optional and can only be provided explicitly or in the URL mask when service is present. Note: App Engine service must be in the same project and located in the same region as the Serverless NEG. # Only valid when networkEndpointType is SERVERLESS. Only one of cloudRun, appEngine or cloudFunction may be set.
    "service": "A String", # Optional serving service. The service name is case-sensitive and must be 1-63 characters long. Example value: default, my-service.
    "urlMask": "A String", # An URL mask is one of the main components of the Cloud Function. A template to parse service and version fields from a request URL. URL mask allows for routing to multiple App Engine services without having to create multiple Network Endpoint Groups and backend services. For example, the request URLs foo1-dot-appname.appspot.com/v1 and foo1-dot-appname.appspot.com/v2 can be backed by the same Serverless NEG with URL mask <service>-dot-appname.appspot.com/<version>. The URL mask will parse them to { service = "foo1", version = "v1" } and { service = "foo1", version = "v2" } respectively.
    "version": "A String", # Optional serving version. The version name is case-sensitive and must be 1-100 characters long. Example value: v1, v2.
  },
  "clientPortMappingMode": "A String", # Only valid when networkEndpointType is GCE_VM_IP_PORT and the NEG is regional.
  "cloudFunction": { # Configuration for a Cloud Function network endpoint group (NEG). The function must be provided explicitly or in the URL mask. Note: Cloud Function must be in the same project and located in the same region as the Serverless NEG. # Only valid when networkEndpointType is SERVERLESS. Only one of cloudRun, appEngine or cloudFunction may be set.
    "function": "A String", # A user-defined name of the Cloud Function. The function name is case-sensitive and must be 1-63 characters long. Example value: func1.
    "urlMask": "A String", # An URL mask is one of the main components of the Cloud Function. A template to parse function field from a request URL. URL mask allows for routing to multiple Cloud Functions without having to create multiple Network Endpoint Groups and backend services. For example, request URLs mydomain.com/function1 and mydomain.com/function2 can be backed by the same Serverless NEG with URL mask /<function>. The URL mask will parse them to { function = "function1" } and { function = "function2" } respectively.
  },
  "cloudRun": { # Configuration for a Cloud Run network endpoint group (NEG). The service must be provided explicitly or in the URL mask. The tag is optional, may be provided explicitly or in the URL mask. Note: Cloud Run service must be in the same project and located in the same region as the Serverless NEG. # Only valid when networkEndpointType is SERVERLESS. Only one of cloudRun, appEngine or cloudFunction may be set.
    "service": "A String", # Cloud Run service is the main resource of Cloud Run. The service must be 1-63 characters long, and comply with RFC1035. Example value: "run-service".
    "tag": "A String", # Optional Cloud Run tag represents the "named-revision" to provide additional fine-grained traffic routing information. The tag must be 1-63 characters long, and comply with RFC1035. Example value: "revision-0010".
    "urlMask": "A String", # An URL mask is one of the main components of the Cloud Function. A template to parse <service> and <tag> fields from a request URL. URL mask allows for routing to multiple Run services without having to create multiple network endpoint groups and backend services. For example, request URLs foo1.domain.com/bar1 and foo1.domain.com/bar2 can be backed by the same Serverless Network Endpoint Group (NEG) with URL mask <tag>.domain.com/<service>. The URL mask will parse them to { service="bar1", tag="foo1" } and { service="bar2", tag="foo2" } respectively.
  },
  "creationTimestamp": "A String", # [Output Only] Creation timestamp in RFC3339 text format.
  "defaultPort": 42, # The default port used if the port number is not specified in the network endpoint. If the network endpoint type is either GCE_VM_IP, SERVERLESS or PRIVATE_SERVICE_CONNECT, this field must not be specified.
  "description": "A String", # An optional description of this resource. Provide this property when you create the resource.
  "id": "A String", # [Output Only] The unique identifier for the resource. This identifier is defined by the server.
  "kind": "compute#networkEndpointGroup", # [Output Only] Type of the resource. Always compute#networkEndpointGroup for network endpoint group.
  "loadBalancer": { # Load balancing specific fields for network endpoint group. # This field is only valid when the network endpoint group is used for load balancing. [Deprecated] This field is deprecated.
    "defaultPort": 42, # The default port used if the port number is not specified in the network endpoint. If the network endpoint type is either GCE_VM_IP, SERVERLESS or PRIVATE_SERVICE_CONNECT, this field must not be specified. [Deprecated] This field is deprecated.
    "network": "A String", # The URL of the network to which all network endpoints in the NEG belong. Uses default project network if unspecified. [Deprecated] This field is deprecated.
    "subnetwork": "A String", # Optional URL of the subnetwork to which all network endpoints in the NEG belong. [Deprecated] This field is deprecated.
    "zone": "A String", # [Output Only] The URL of the zone where the network endpoint group is located. [Deprecated] This field is deprecated.
  },
  "name": "A String", # Name of the resource; provided by the client when the resource is created. The name must be 1-63 characters long, and comply with RFC1035. Specifically, the name must be 1-63 characters long and match the regular expression `[a-z]([-a-z0-9]*[a-z0-9])?` which means the first character must be a lowercase letter, and all following characters must be a dash, lowercase letter, or digit, except the last character, which cannot be a dash.
  "network": "A String", # The URL of the network to which all network endpoints in the NEG belong. Uses default project network if unspecified.
  "networkEndpointType": "A String", # Type of network endpoints in this network endpoint group. Can be one of GCE_VM_IP, GCE_VM_IP_PORT, NON_GCP_PRIVATE_IP_PORT, INTERNET_FQDN_PORT, INTERNET_IP_PORT, SERVERLESS, PRIVATE_SERVICE_CONNECT.
  "pscData": { # All data that is specifically relevant to only network endpoint groups of type PRIVATE_SERVICE_CONNECT.
    "consumerPscAddress": "A String", # [Output Only] Address allocated from given subnetwork for PSC. This IP address acts as a VIP for a PSC NEG, allowing it to act as an endpoint in L7 PSC-XLB.
    "pscConnectionId": "A String", # [Output Only] The PSC connection id of the PSC Network Endpoint Group Consumer.
    "pscConnectionStatus": "A String", # [Output Only] The connection status of the PSC Forwarding Rule.
  },
  "pscTargetService": "A String", # The target service url used to set up private service connection to a Google API or a PSC Producer Service Attachment. An example value is: asia-northeast3-cloudkms.googleapis.com
  "region": "A String", # [Output Only] The URL of the region where the network endpoint group is located.
  "selfLink": "A String", # [Output Only] Server-defined URL for the resource.
  "serverlessDeployment": { # Configuration for a serverless network endpoint group (NEG). The platform must be provided. Note: The target backend service must be in the same project and located in the same region as the Serverless NEG. # Only valid when networkEndpointType is SERVERLESS. Only one of cloudRun, appEngine, cloudFunction or serverlessDeployment may be set.
    "platform": "A String", # The platform of the backend target(s) of this NEG. The only supported value is API Gateway: apigateway.googleapis.com.
    "resource": "A String", # The user-defined name of the workload/instance. This value must be provided explicitly or in the urlMask. The resource identified by this value is platform-specific and is as follows: 1. API Gateway: The gateway ID 2. App Engine: The service name 3. Cloud Functions: The function name 4. Cloud Run: The service name
    "urlMask": "A String", # An URL mask is one of the main components of the Cloud Function. A template to parse platform-specific fields from a request URL. URL mask allows for routing to multiple resources on the same serverless platform without having to create multiple Network Endpoint Groups and backend resources. The fields parsed by this template are platform-specific and are as follows: 1. API Gateway: The gateway ID 2. App Engine: The service and version 3. Cloud Functions: The function name 4. Cloud Run: The service and tag
    "version": "A String", # The optional resource version. The version identified by this value is platform-specific and is follows: 1. API Gateway: Unused 2. App Engine: The service version 3. Cloud Functions: Unused 4. Cloud Run: The service tag
  },
  "size": 42, # [Output only] Number of network endpoints in the network endpoint group.
  "subnetwork": "A String", # Optional URL of the subnetwork to which all network endpoints in the NEG belong.
  "zone": "A String", # [Output Only] The URL of the zone where the network endpoint group is located.
}
insert(project, region, body=None, requestId=None, x__xgafv=None)
Creates a network endpoint group in the specified project using the parameters that are included in the request.

Args:
  project: string, Project ID for this request. (required)
  region: string, The name of the region where you want to create the network endpoint group. It should comply with RFC1035. (required)
  body: object, The request body.
    The object takes the form of:

{ # Represents a collection of network endpoints. A network endpoint group (NEG) defines how a set of endpoints should be reached, whether they are reachable, and where they are located. For more information about using NEGs for different use cases, see Network endpoint groups overview.
  "annotations": { # Metadata defined as annotations on the network endpoint group.
    "a_key": "A String",
  },
  "appEngine": { # Configuration for an App Engine network endpoint group (NEG). The service is optional, may be provided explicitly or in the URL mask. The version is optional and can only be provided explicitly or in the URL mask when service is present. Note: App Engine service must be in the same project and located in the same region as the Serverless NEG. # Only valid when networkEndpointType is SERVERLESS. Only one of cloudRun, appEngine or cloudFunction may be set.
    "service": "A String", # Optional serving service. The service name is case-sensitive and must be 1-63 characters long. Example value: default, my-service.
    "urlMask": "A String", # An URL mask is one of the main components of the Cloud Function. A template to parse service and version fields from a request URL. URL mask allows for routing to multiple App Engine services without having to create multiple Network Endpoint Groups and backend services. For example, the request URLs foo1-dot-appname.appspot.com/v1 and foo1-dot-appname.appspot.com/v2 can be backed by the same Serverless NEG with URL mask <service>-dot-appname.appspot.com/<version>. The URL mask will parse them to { service = "foo1", version = "v1" } and { service = "foo1", version = "v2" } respectively.
    "version": "A String", # Optional serving version. The version name is case-sensitive and must be 1-100 characters long. Example value: v1, v2.
  },
  "clientPortMappingMode": "A String", # Only valid when networkEndpointType is GCE_VM_IP_PORT and the NEG is regional.
  "cloudFunction": { # Configuration for a Cloud Function network endpoint group (NEG). The function must be provided explicitly or in the URL mask. Note: Cloud Function must be in the same project and located in the same region as the Serverless NEG. # Only valid when networkEndpointType is SERVERLESS. Only one of cloudRun, appEngine or cloudFunction may be set.
    "function": "A String", # A user-defined name of the Cloud Function. The function name is case-sensitive and must be 1-63 characters long. Example value: func1.
    "urlMask": "A String", # An URL mask is one of the main components of the Cloud Function. A template to parse function field from a request URL. URL mask allows for routing to multiple Cloud Functions without having to create multiple Network Endpoint Groups and backend services. For example, request URLs mydomain.com/function1 and mydomain.com/function2 can be backed by the same Serverless NEG with URL mask /<function>. The URL mask will parse them to { function = "function1" } and { function = "function2" } respectively.
  },
  "cloudRun": { # Configuration for a Cloud Run network endpoint group (NEG). The service must be provided explicitly or in the URL mask. The tag is optional, may be provided explicitly or in the URL mask. Note: Cloud Run service must be in the same project and located in the same region as the Serverless NEG. # Only valid when networkEndpointType is SERVERLESS. Only one of cloudRun, appEngine or cloudFunction may be set.
    "service": "A String", # Cloud Run service is the main resource of Cloud Run. The service must be 1-63 characters long, and comply with RFC1035. Example value: "run-service".
    "tag": "A String", # Optional Cloud Run tag represents the "named-revision" to provide additional fine-grained traffic routing information. The tag must be 1-63 characters long, and comply with RFC1035. Example value: "revision-0010".
    "urlMask": "A String", # An URL mask is one of the main components of the Cloud Function. A template to parse <service> and <tag> fields from a request URL. URL mask allows for routing to multiple Run services without having to create multiple network endpoint groups and backend services. For example, request URLs foo1.domain.com/bar1 and foo1.domain.com/bar2 can be backed by the same Serverless Network Endpoint Group (NEG) with URL mask <tag>.domain.com/<service>. The URL mask will parse them to { service="bar1", tag="foo1" } and { service="bar2", tag="foo2" } respectively.
  },
  "creationTimestamp": "A String", # [Output Only] Creation timestamp in RFC3339 text format.
  "defaultPort": 42, # The default port used if the port number is not specified in the network endpoint. If the network endpoint type is either GCE_VM_IP, SERVERLESS or PRIVATE_SERVICE_CONNECT, this field must not be specified.
  "description": "A String", # An optional description of this resource. Provide this property when you create the resource.
  "id": "A String", # [Output Only] The unique identifier for the resource. This identifier is defined by the server.
  "kind": "compute#networkEndpointGroup", # [Output Only] Type of the resource. Always compute#networkEndpointGroup for network endpoint group.
  "loadBalancer": { # Load balancing specific fields for network endpoint group. # This field is only valid when the network endpoint group is used for load balancing. [Deprecated] This field is deprecated.
    "defaultPort": 42, # The default port used if the port number is not specified in the network endpoint. If the network endpoint type is either GCE_VM_IP, SERVERLESS or PRIVATE_SERVICE_CONNECT, this field must not be specified. [Deprecated] This field is deprecated.
    "network": "A String", # The URL of the network to which all network endpoints in the NEG belong. Uses default project network if unspecified. [Deprecated] This field is deprecated.
    "subnetwork": "A String", # Optional URL of the subnetwork to which all network endpoints in the NEG belong. [Deprecated] This field is deprecated.
    "zone": "A String", # [Output Only] The URL of the zone where the network endpoint group is located. [Deprecated] This field is deprecated.
  },
  "name": "A String", # Name of the resource; provided by the client when the resource is created. The name must be 1-63 characters long, and comply with RFC1035. Specifically, the name must be 1-63 characters long and match the regular expression `[a-z]([-a-z0-9]*[a-z0-9])?` which means the first character must be a lowercase letter, and all following characters must be a dash, lowercase letter, or digit, except the last character, which cannot be a dash.
  "network": "A String", # The URL of the network to which all network endpoints in the NEG belong. Uses default project network if unspecified.
  "networkEndpointType": "A String", # Type of network endpoints in this network endpoint group. Can be one of GCE_VM_IP, GCE_VM_IP_PORT, NON_GCP_PRIVATE_IP_PORT, INTERNET_FQDN_PORT, INTERNET_IP_PORT, SERVERLESS, PRIVATE_SERVICE_CONNECT.
  "pscData": { # All data that is specifically relevant to only network endpoint groups of type PRIVATE_SERVICE_CONNECT.
    "consumerPscAddress": "A String", # [Output Only] Address allocated from given subnetwork for PSC. This IP address acts as a VIP for a PSC NEG, allowing it to act as an endpoint in L7 PSC-XLB.
    "pscConnectionId": "A String", # [Output Only] The PSC connection id of the PSC Network Endpoint Group Consumer.
    "pscConnectionStatus": "A String", # [Output Only] The connection status of the PSC Forwarding Rule.
  },
  "pscTargetService": "A String", # The target service url used to set up private service connection to a Google API or a PSC Producer Service Attachment. An example value is: asia-northeast3-cloudkms.googleapis.com
  "region": "A String", # [Output Only] The URL of the region where the network endpoint group is located.
  "selfLink": "A String", # [Output Only] Server-defined URL for the resource.
  "serverlessDeployment": { # Configuration for a serverless network endpoint group (NEG). The platform must be provided. Note: The target backend service must be in the same project and located in the same region as the Serverless NEG. # Only valid when networkEndpointType is SERVERLESS. Only one of cloudRun, appEngine, cloudFunction or serverlessDeployment may be set.
    "platform": "A String", # The platform of the backend target(s) of this NEG. The only supported value is API Gateway: apigateway.googleapis.com.
    "resource": "A String", # The user-defined name of the workload/instance. This value must be provided explicitly or in the urlMask. The resource identified by this value is platform-specific and is as follows: 1. API Gateway: The gateway ID 2. App Engine: The service name 3. Cloud Functions: The function name 4. Cloud Run: The service name
    "urlMask": "A String", # An URL mask is one of the main components of the Cloud Function. A template to parse platform-specific fields from a request URL. URL mask allows for routing to multiple resources on the same serverless platform without having to create multiple Network Endpoint Groups and backend resources. The fields parsed by this template are platform-specific and are as follows: 1. API Gateway: The gateway ID 2. App Engine: The service and version 3. Cloud Functions: The function name 4. Cloud Run: The service and tag
    "version": "A String", # The optional resource version. The version identified by this value is platform-specific and is follows: 1. API Gateway: Unused 2. App Engine: The service version 3. Cloud Functions: Unused 4. Cloud Run: The service tag
  },
  "size": 42, # [Output only] Number of network endpoints in the network endpoint group.
  "subnetwork": "A String", # Optional URL of the subnetwork to which all network endpoints in the NEG belong.
  "zone": "A String", # [Output Only] The URL of the zone where the network endpoint group is located.
}

  requestId: string, An optional request ID to identify requests. Specify a unique request ID so that if you must retry your request, the server will know to ignore the request if it has already been completed. For example, consider a situation where you make an initial request and the request times out. If you make the request again with the same request ID, the server can check if original operation with the same request ID was received, and if so, will ignore the second request. This prevents clients from accidentally creating duplicate commitments. The request ID must be a valid UUID with the exception that zero UUID is not supported ( 00000000-0000-0000-0000-000000000000).
  x__xgafv: string, V1 error format.
    Allowed values
      1 - v1 error format
      2 - v2 error format

Returns:
  An object of the form:

    { # Represents an Operation resource. Google Compute Engine has three Operation resources: * [Global](/compute/docs/reference/rest/beta/globalOperations) * [Regional](/compute/docs/reference/rest/beta/regionOperations) * [Zonal](/compute/docs/reference/rest/beta/zoneOperations) You can use an operation resource to manage asynchronous API requests. For more information, read Handling API responses. Operations can be global, regional or zonal. - For global operations, use the `globalOperations` resource. - For regional operations, use the `regionOperations` resource. - For zonal operations, use the `zoneOperations` resource. For more information, read Global, Regional, and Zonal Resources. Note that completed Operation resources have a limited retention period.
  "clientOperationId": "A String", # [Output Only] The value of `requestId` if you provided it in the request. Not present otherwise.
  "creationTimestamp": "A String", # [Deprecated] This field is deprecated.
  "description": "A String", # [Output Only] A textual description of the operation, which is set when the operation is created.
  "endTime": "A String", # [Output Only] The time that this operation was completed. This value is in RFC3339 text format.
  "error": { # [Output Only] If errors are generated during processing of the operation, this field will be populated.
    "errors": [ # [Output Only] The array of errors encountered while processing this operation.
      {
        "code": "A String", # [Output Only] The error type identifier for this error.
        "errorDetails": [ # [Output Only] An optional list of messages that contain the error details. There is a set of defined message types to use for providing details.The syntax depends on the error code. For example, QuotaExceededInfo will have details when the error code is QUOTA_EXCEEDED.
          {
            "errorInfo": { # Describes the cause of the error with structured details. Example of an error when contacting the "pubsub.googleapis.com" API when it is not enabled: { "reason": "API_DISABLED" "domain": "googleapis.com" "metadata": { "resource": "projects/123", "service": "pubsub.googleapis.com" } } This response indicates that the pubsub.googleapis.com API is not enabled. Example of an error that is returned when attempting to create a Spanner instance in a region that is out of stock: { "reason": "STOCKOUT" "domain": "spanner.googleapis.com", "metadata": { "availableRegions": "us-central1,us-east2" } }
              "domain": "A String", # The logical grouping to which the "reason" belongs. The error domain is typically the registered service name of the tool or product that generates the error. Example: "pubsub.googleapis.com". If the error is generated by some common infrastructure, the error domain must be a globally unique value that identifies the infrastructure. For Google API infrastructure, the error domain is "googleapis.com".
              "metadatas": { # Additional structured details about this error. Keys should match /[a-zA-Z0-9-_]/ and be limited to 64 characters in length. When identifying the current value of an exceeded limit, the units should be contained in the key, not the value. For example, rather than {"instanceLimit": "100/request"}, should be returned as, {"instanceLimitPerRequest": "100"}, if the client exceeds the number of instances that can be created in a single (batch) request.
                "a_key": "A String",
              },
              "reason": "A String", # The reason of the error. This is a constant value that identifies the proximate cause of the error. Error reasons are unique within a particular domain of errors. This should be at most 63 characters and match a regular expression of `A-Z+[A-Z0-9]`, which represents UPPER_SNAKE_CASE.
            },
            "help": { # Provides links to documentation or for performing an out of band action. For example, if a quota check failed with an error indicating the calling project hasn't enabled the accessed service, this can contain a URL pointing directly to the right place in the developer console to flip the bit.
              "links": [ # URL(s) pointing to additional information on handling the current error.
                { # Describes a URL link.
                  "description": "A String", # Describes what the link offers.
                  "url": "A String", # The URL of the link.
                },
              ],
            },
            "localizedMessage": { # Provides a localized error message that is safe to return to the user which can be attached to an RPC error.
              "locale": "A String", # The locale used following the specification defined at https://www.rfc-editor.org/rfc/bcp/bcp47.txt. Examples are: "en-US", "fr-CH", "es-MX"
              "message": "A String", # The localized error message in the above locale.
            },
            "quotaInfo": { # Additional details for quota exceeded error for resource quota.
              "dimensions": { # The map holding related quota dimensions.
                "a_key": "A String",
              },
              "futureLimit": 3.14, # Future quota limit being rolled out. The limit's unit depends on the quota type or metric.
              "limit": 3.14, # Current effective quota limit. The limit's unit depends on the quota type or metric.
              "limitName": "A String", # The name of the quota limit.
              "metricName": "A String", # The Compute Engine quota metric name.
              "rolloutStatus": "A String", # Rollout status of the future quota limit.
            },
          },
        ],
        "location": "A String", # [Output Only] Indicates the field in the request that caused the error. This property is optional.
        "message": "A String", # [Output Only] An optional, human-readable error message.
      },
    ],
  },
  "httpErrorMessage": "A String", # [Output Only] If the operation fails, this field contains the HTTP error message that was returned, such as `NOT FOUND`.
  "httpErrorStatusCode": 42, # [Output Only] If the operation fails, this field contains the HTTP error status code that was returned. For example, a `404` means the resource was not found.
  "id": "A String", # [Output Only] The unique identifier for the operation. This identifier is defined by the server.
  "insertTime": "A String", # [Output Only] The time that this operation was requested. This value is in RFC3339 text format.
  "instancesBulkInsertOperationMetadata": {
    "perLocationStatus": { # Status information per location (location name is key). Example key: zones/us-central1-a
      "a_key": {
        "createdVmCount": 42, # [Output Only] Count of VMs successfully created so far.
        "deletedVmCount": 42, # [Output Only] Count of VMs that got deleted during rollback.
        "failedToCreateVmCount": 42, # [Output Only] Count of VMs that started creating but encountered an error.
        "status": "A String", # [Output Only] Creation status of BulkInsert operation - information if the flow is rolling forward or rolling back.
        "targetVmCount": 42, # [Output Only] Count of VMs originally planned to be created.
      },
    },
  },
  "kind": "compute#operation", # [Output Only] Type of the resource. Always `compute#operation` for Operation resources.
  "name": "A String", # [Output Only] Name of the operation.
  "operationGroupId": "A String", # [Output Only] An ID that represents a group of operations, such as when a group of operations results from a `bulkInsert` API request.
  "operationType": "A String", # [Output Only] The type of operation, such as `insert`, `update`, or `delete`, and so on.
  "progress": 42, # [Output Only] An optional progress indicator that ranges from 0 to 100. There is no requirement that this be linear or support any granularity of operations. This should not be used to guess when the operation will be complete. This number should monotonically increase as the operation progresses.
  "region": "A String", # [Output Only] The URL of the region where the operation resides. Only applicable when performing regional operations.
  "selfLink": "A String", # [Output Only] Server-defined URL for the resource.
  "setCommonInstanceMetadataOperationMetadata": { # [Output Only] If the operation is for projects.setCommonInstanceMetadata, this field will contain information on all underlying zonal actions and their state.
    "clientOperationId": "A String", # [Output Only] The client operation id.
    "perLocationOperations": { # [Output Only] Status information per location (location name is key). Example key: zones/us-central1-a
      "a_key": {
        "error": { # The `Status` type defines a logical error model that is suitable for different programming environments, including REST APIs and RPC APIs. It is used by [gRPC](https://github.com/grpc). Each `Status` message contains three pieces of data: error code, error message, and error details. You can find out more about this error model and how to work with it in the [API Design Guide](https://cloud.google.com/apis/design/errors). # [Output Only] If state is `ABANDONED` or `FAILED`, this field is populated.
          "code": 42, # The status code, which should be an enum value of google.rpc.Code.
          "details": [ # A list of messages that carry the error details. There is a common set of message types for APIs to use.
            {
              "a_key": "", # Properties of the object. Contains field @type with type URL.
            },
          ],
          "message": "A String", # A developer-facing error message, which should be in English. Any user-facing error message should be localized and sent in the google.rpc.Status.details field, or localized by the client.
        },
        "state": "A String", # [Output Only] Status of the action, which can be one of the following: `PROPAGATING`, `PROPAGATED`, `ABANDONED`, `FAILED`, or `DONE`.
      },
    },
  },
  "startTime": "A String", # [Output Only] The time that this operation was started by the server. This value is in RFC3339 text format.
  "status": "A String", # [Output Only] The status of the operation, which can be one of the following: `PENDING`, `RUNNING`, or `DONE`.
  "statusMessage": "A String", # [Output Only] An optional textual description of the current status of the operation.
  "targetId": "A String", # [Output Only] The unique target ID, which identifies a specific incarnation of the target resource.
  "targetLink": "A String", # [Output Only] The URL of the resource that the operation modifies. For operations related to creating a snapshot, this points to the persistent disk that the snapshot was created from.
  "user": "A String", # [Output Only] User who requested the operation, for example: `user@example.com` or `alice_smith_identifier (global/workforcePools/example-com-us-employees)`.
  "warnings": [ # [Output Only] If warning messages are generated during processing of the operation, this field will be populated.
    {
      "code": "A String", # [Output Only] A warning code, if applicable. For example, Compute Engine returns NO_RESULTS_ON_PAGE if there are no results in the response.
      "data": [ # [Output Only] Metadata about this warning in key: value format. For example: "data": [ { "key": "scope", "value": "zones/us-east1-d" }
        {
          "key": "A String", # [Output Only] A key that provides more detail on the warning being returned. For example, for warnings where there are no results in a list request for a particular zone, this key might be scope and the key value might be the zone name. Other examples might be a key indicating a deprecated resource and a suggested replacement, or a warning about invalid network settings (for example, if an instance attempts to perform IP forwarding but is not enabled for IP forwarding).
          "value": "A String", # [Output Only] A warning data value corresponding to the key.
        },
      ],
      "message": "A String", # [Output Only] A human-readable description of the warning code.
    },
  ],
  "zone": "A String", # [Output Only] The URL of the zone where the operation resides. Only applicable when performing per-zone operations.
}
list(project, region, filter=None, maxResults=None, orderBy=None, pageToken=None, returnPartialSuccess=None, x__xgafv=None)
Retrieves the list of regional network endpoint groups available to the specified project in the given region.

Args:
  project: string, Project ID for this request. (required)
  region: string, The name of the region where the network endpoint group is located. It should comply with RFC1035. (required)
  filter: string, A filter expression that filters resources listed in the response. Most Compute resources support two types of filter expressions: expressions that support regular expressions and expressions that follow API improvement proposal AIP-160. These two types of filter expressions cannot be mixed in one request. If you want to use AIP-160, your expression must specify the field name, an operator, and the value that you want to use for filtering. The value must be a string, a number, or a boolean. The operator must be either `=`, `!=`, `>`, `<`, `<=`, `>=` or `:`. For example, if you are filtering Compute Engine instances, you can exclude instances named `example-instance` by specifying `name != example-instance`. The `:*` comparison can be used to test whether a key has been defined. For example, to find all objects with `owner` label use: ``` labels.owner:* ``` You can also filter nested fields. For example, you could specify `scheduling.automaticRestart = false` to include instances only if they are not scheduled for automatic restarts. You can use filtering on nested fields to filter based on resource labels. To filter on multiple expressions, provide each separate expression within parentheses. For example: ``` (scheduling.automaticRestart = true) (cpuPlatform = "Intel Skylake") ``` By default, each expression is an `AND` expression. However, you can include `AND` and `OR` expressions explicitly. For example: ``` (cpuPlatform = "Intel Skylake") OR (cpuPlatform = "Intel Broadwell") AND (scheduling.automaticRestart = true) ``` If you want to use a regular expression, use the `eq` (equal) or `ne` (not equal) operator against a single un-parenthesized expression with or without quotes or against multiple parenthesized expressions. Examples: `fieldname eq unquoted literal` `fieldname eq 'single quoted literal'` `fieldname eq "double quoted literal"` `(fieldname1 eq literal) (fieldname2 ne "literal")` The literal value is interpreted as a regular expression using Google RE2 library syntax. The literal value must match the entire field. For example, to filter for instances that do not end with name "instance", you would use `name ne .*instance`. You cannot combine constraints on multiple fields using regular expressions.
  maxResults: integer, The maximum number of results per page that should be returned. If the number of available results is larger than `maxResults`, Compute Engine returns a `nextPageToken` that can be used to get the next page of results in subsequent list requests. Acceptable values are `0` to `500`, inclusive. (Default: `500`)
  orderBy: string, Sorts list results by a certain order. By default, results are returned in alphanumerical order based on the resource name. You can also sort results in descending order based on the creation timestamp using `orderBy="creationTimestamp desc"`. This sorts results based on the `creationTimestamp` field in reverse chronological order (newest result first). Use this to sort resources like operations so that the newest operation is returned first. Currently, only sorting by `name` or `creationTimestamp desc` is supported.
  pageToken: string, Specifies a page token to use. Set `pageToken` to the `nextPageToken` returned by a previous list request to get the next page of results.
  returnPartialSuccess: boolean, Opt-in for partial success behavior which provides partial results in case of failure. The default value is false. For example, when partial success behavior is enabled, aggregatedList for a single zone scope either returns all resources in the zone or no resources, with an error code.
  x__xgafv: string, V1 error format.
    Allowed values
      1 - v1 error format
      2 - v2 error format

Returns:
  An object of the form:

    {
  "id": "A String", # [Output Only] Unique identifier for the resource; defined by the server.
  "items": [ # A list of NetworkEndpointGroup resources.
    { # Represents a collection of network endpoints. A network endpoint group (NEG) defines how a set of endpoints should be reached, whether they are reachable, and where they are located. For more information about using NEGs for different use cases, see Network endpoint groups overview.
      "annotations": { # Metadata defined as annotations on the network endpoint group.
        "a_key": "A String",
      },
      "appEngine": { # Configuration for an App Engine network endpoint group (NEG). The service is optional, may be provided explicitly or in the URL mask. The version is optional and can only be provided explicitly or in the URL mask when service is present. Note: App Engine service must be in the same project and located in the same region as the Serverless NEG. # Only valid when networkEndpointType is SERVERLESS. Only one of cloudRun, appEngine or cloudFunction may be set.
        "service": "A String", # Optional serving service. The service name is case-sensitive and must be 1-63 characters long. Example value: default, my-service.
        "urlMask": "A String", # An URL mask is one of the main components of the Cloud Function. A template to parse service and version fields from a request URL. URL mask allows for routing to multiple App Engine services without having to create multiple Network Endpoint Groups and backend services. For example, the request URLs foo1-dot-appname.appspot.com/v1 and foo1-dot-appname.appspot.com/v2 can be backed by the same Serverless NEG with URL mask <service>-dot-appname.appspot.com/<version>. The URL mask will parse them to { service = "foo1", version = "v1" } and { service = "foo1", version = "v2" } respectively.
        "version": "A String", # Optional serving version. The version name is case-sensitive and must be 1-100 characters long. Example value: v1, v2.
      },
      "clientPortMappingMode": "A String", # Only valid when networkEndpointType is GCE_VM_IP_PORT and the NEG is regional.
      "cloudFunction": { # Configuration for a Cloud Function network endpoint group (NEG). The function must be provided explicitly or in the URL mask. Note: Cloud Function must be in the same project and located in the same region as the Serverless NEG. # Only valid when networkEndpointType is SERVERLESS. Only one of cloudRun, appEngine or cloudFunction may be set.
        "function": "A String", # A user-defined name of the Cloud Function. The function name is case-sensitive and must be 1-63 characters long. Example value: func1.
        "urlMask": "A String", # An URL mask is one of the main components of the Cloud Function. A template to parse function field from a request URL. URL mask allows for routing to multiple Cloud Functions without having to create multiple Network Endpoint Groups and backend services. For example, request URLs mydomain.com/function1 and mydomain.com/function2 can be backed by the same Serverless NEG with URL mask /<function>. The URL mask will parse them to { function = "function1" } and { function = "function2" } respectively.
      },
      "cloudRun": { # Configuration for a Cloud Run network endpoint group (NEG). The service must be provided explicitly or in the URL mask. The tag is optional, may be provided explicitly or in the URL mask. Note: Cloud Run service must be in the same project and located in the same region as the Serverless NEG. # Only valid when networkEndpointType is SERVERLESS. Only one of cloudRun, appEngine or cloudFunction may be set.
        "service": "A String", # Cloud Run service is the main resource of Cloud Run. The service must be 1-63 characters long, and comply with RFC1035. Example value: "run-service".
        "tag": "A String", # Optional Cloud Run tag represents the "named-revision" to provide additional fine-grained traffic routing information. The tag must be 1-63 characters long, and comply with RFC1035. Example value: "revision-0010".
        "urlMask": "A String", # An URL mask is one of the main components of the Cloud Function. A template to parse <service> and <tag> fields from a request URL. URL mask allows for routing to multiple Run services without having to create multiple network endpoint groups and backend services. For example, request URLs foo1.domain.com/bar1 and foo1.domain.com/bar2 can be backed by the same Serverless Network Endpoint Group (NEG) with URL mask <tag>.domain.com/<service>. The URL mask will parse them to { service="bar1", tag="foo1" } and { service="bar2", tag="foo2" } respectively.
      },
      "creationTimestamp": "A String", # [Output Only] Creation timestamp in RFC3339 text format.
      "defaultPort": 42, # The default port used if the port number is not specified in the network endpoint. If the network endpoint type is either GCE_VM_IP, SERVERLESS or PRIVATE_SERVICE_CONNECT, this field must not be specified.
      "description": "A String", # An optional description of this resource. Provide this property when you create the resource.
      "id": "A String", # [Output Only] The unique identifier for the resource. This identifier is defined by the server.
      "kind": "compute#networkEndpointGroup", # [Output Only] Type of the resource. Always compute#networkEndpointGroup for network endpoint group.
      "loadBalancer": { # Load balancing specific fields for network endpoint group. # This field is only valid when the network endpoint group is used for load balancing. [Deprecated] This field is deprecated.
        "defaultPort": 42, # The default port used if the port number is not specified in the network endpoint. If the network endpoint type is either GCE_VM_IP, SERVERLESS or PRIVATE_SERVICE_CONNECT, this field must not be specified. [Deprecated] This field is deprecated.
        "network": "A String", # The URL of the network to which all network endpoints in the NEG belong. Uses default project network if unspecified. [Deprecated] This field is deprecated.
        "subnetwork": "A String", # Optional URL of the subnetwork to which all network endpoints in the NEG belong. [Deprecated] This field is deprecated.
        "zone": "A String", # [Output Only] The URL of the zone where the network endpoint group is located. [Deprecated] This field is deprecated.
      },
      "name": "A String", # Name of the resource; provided by the client when the resource is created. The name must be 1-63 characters long, and comply with RFC1035. Specifically, the name must be 1-63 characters long and match the regular expression `[a-z]([-a-z0-9]*[a-z0-9])?` which means the first character must be a lowercase letter, and all following characters must be a dash, lowercase letter, or digit, except the last character, which cannot be a dash.
      "network": "A String", # The URL of the network to which all network endpoints in the NEG belong. Uses default project network if unspecified.
      "networkEndpointType": "A String", # Type of network endpoints in this network endpoint group. Can be one of GCE_VM_IP, GCE_VM_IP_PORT, NON_GCP_PRIVATE_IP_PORT, INTERNET_FQDN_PORT, INTERNET_IP_PORT, SERVERLESS, PRIVATE_SERVICE_CONNECT.
      "pscData": { # All data that is specifically relevant to only network endpoint groups of type PRIVATE_SERVICE_CONNECT.
        "consumerPscAddress": "A String", # [Output Only] Address allocated from given subnetwork for PSC. This IP address acts as a VIP for a PSC NEG, allowing it to act as an endpoint in L7 PSC-XLB.
        "pscConnectionId": "A String", # [Output Only] The PSC connection id of the PSC Network Endpoint Group Consumer.
        "pscConnectionStatus": "A String", # [Output Only] The connection status of the PSC Forwarding Rule.
      },
      "pscTargetService": "A String", # The target service url used to set up private service connection to a Google API or a PSC Producer Service Attachment. An example value is: asia-northeast3-cloudkms.googleapis.com
      "region": "A String", # [Output Only] The URL of the region where the network endpoint group is located.
      "selfLink": "A String", # [Output Only] Server-defined URL for the resource.
      "serverlessDeployment": { # Configuration for a serverless network endpoint group (NEG). The platform must be provided. Note: The target backend service must be in the same project and located in the same region as the Serverless NEG. # Only valid when networkEndpointType is SERVERLESS. Only one of cloudRun, appEngine, cloudFunction or serverlessDeployment may be set.
        "platform": "A String", # The platform of the backend target(s) of this NEG. The only supported value is API Gateway: apigateway.googleapis.com.
        "resource": "A String", # The user-defined name of the workload/instance. This value must be provided explicitly or in the urlMask. The resource identified by this value is platform-specific and is as follows: 1. API Gateway: The gateway ID 2. App Engine: The service name 3. Cloud Functions: The function name 4. Cloud Run: The service name
        "urlMask": "A String", # An URL mask is one of the main components of the Cloud Function. A template to parse platform-specific fields from a request URL. URL mask allows for routing to multiple resources on the same serverless platform without having to create multiple Network Endpoint Groups and backend resources. The fields parsed by this template are platform-specific and are as follows: 1. API Gateway: The gateway ID 2. App Engine: The service and version 3. Cloud Functions: The function name 4. Cloud Run: The service and tag
        "version": "A String", # The optional resource version. The version identified by this value is platform-specific and is follows: 1. API Gateway: Unused 2. App Engine: The service version 3. Cloud Functions: Unused 4. Cloud Run: The service tag
      },
      "size": 42, # [Output only] Number of network endpoints in the network endpoint group.
      "subnetwork": "A String", # Optional URL of the subnetwork to which all network endpoints in the NEG belong.
      "zone": "A String", # [Output Only] The URL of the zone where the network endpoint group is located.
    },
  ],
  "kind": "compute#networkEndpointGroupList", # [Output Only] The resource type, which is always compute#networkEndpointGroupList for network endpoint group lists.
  "nextPageToken": "A String", # [Output Only] This token allows you to get the next page of results for list requests. If the number of results is larger than maxResults, use the nextPageToken as a value for the query parameter pageToken in the next list request. Subsequent list requests will have their own nextPageToken to continue paging through the results.
  "selfLink": "A String", # [Output Only] Server-defined URL for this resource.
  "warning": { # [Output Only] Informational warning message.
    "code": "A String", # [Output Only] A warning code, if applicable. For example, Compute Engine returns NO_RESULTS_ON_PAGE if there are no results in the response.
    "data": [ # [Output Only] Metadata about this warning in key: value format. For example: "data": [ { "key": "scope", "value": "zones/us-east1-d" }
      {
        "key": "A String", # [Output Only] A key that provides more detail on the warning being returned. For example, for warnings where there are no results in a list request for a particular zone, this key might be scope and the key value might be the zone name. Other examples might be a key indicating a deprecated resource and a suggested replacement, or a warning about invalid network settings (for example, if an instance attempts to perform IP forwarding but is not enabled for IP forwarding).
        "value": "A String", # [Output Only] A warning data value corresponding to the key.
      },
    ],
    "message": "A String", # [Output Only] A human-readable description of the warning code.
  },
}
listNetworkEndpoints(project, region, networkEndpointGroup, filter=None, maxResults=None, orderBy=None, pageToken=None, returnPartialSuccess=None, x__xgafv=None)
Lists the network endpoints in the specified network endpoint group.

Args:
  project: string, Project ID for this request. (required)
  region: string, The name of the region where the network endpoint group is located. It should comply with RFC1035. (required)
  networkEndpointGroup: string, The name of the network endpoint group from which you want to generate a list of included network endpoints. It should comply with RFC1035. (required)
  filter: string, A filter expression that filters resources listed in the response. Most Compute resources support two types of filter expressions: expressions that support regular expressions and expressions that follow API improvement proposal AIP-160. These two types of filter expressions cannot be mixed in one request. If you want to use AIP-160, your expression must specify the field name, an operator, and the value that you want to use for filtering. The value must be a string, a number, or a boolean. The operator must be either `=`, `!=`, `>`, `<`, `<=`, `>=` or `:`. For example, if you are filtering Compute Engine instances, you can exclude instances named `example-instance` by specifying `name != example-instance`. The `:*` comparison can be used to test whether a key has been defined. For example, to find all objects with `owner` label use: ``` labels.owner:* ``` You can also filter nested fields. For example, you could specify `scheduling.automaticRestart = false` to include instances only if they are not scheduled for automatic restarts. You can use filtering on nested fields to filter based on resource labels. To filter on multiple expressions, provide each separate expression within parentheses. For example: ``` (scheduling.automaticRestart = true) (cpuPlatform = "Intel Skylake") ``` By default, each expression is an `AND` expression. However, you can include `AND` and `OR` expressions explicitly. For example: ``` (cpuPlatform = "Intel Skylake") OR (cpuPlatform = "Intel Broadwell") AND (scheduling.automaticRestart = true) ``` If you want to use a regular expression, use the `eq` (equal) or `ne` (not equal) operator against a single un-parenthesized expression with or without quotes or against multiple parenthesized expressions. Examples: `fieldname eq unquoted literal` `fieldname eq 'single quoted literal'` `fieldname eq "double quoted literal"` `(fieldname1 eq literal) (fieldname2 ne "literal")` The literal value is interpreted as a regular expression using Google RE2 library syntax. The literal value must match the entire field. For example, to filter for instances that do not end with name "instance", you would use `name ne .*instance`. You cannot combine constraints on multiple fields using regular expressions.
  maxResults: integer, The maximum number of results per page that should be returned. If the number of available results is larger than `maxResults`, Compute Engine returns a `nextPageToken` that can be used to get the next page of results in subsequent list requests. Acceptable values are `0` to `500`, inclusive. (Default: `500`)
  orderBy: string, Sorts list results by a certain order. By default, results are returned in alphanumerical order based on the resource name. You can also sort results in descending order based on the creation timestamp using `orderBy="creationTimestamp desc"`. This sorts results based on the `creationTimestamp` field in reverse chronological order (newest result first). Use this to sort resources like operations so that the newest operation is returned first. Currently, only sorting by `name` or `creationTimestamp desc` is supported.
  pageToken: string, Specifies a page token to use. Set `pageToken` to the `nextPageToken` returned by a previous list request to get the next page of results.
  returnPartialSuccess: boolean, Opt-in for partial success behavior which provides partial results in case of failure. The default value is false. For example, when partial success behavior is enabled, aggregatedList for a single zone scope either returns all resources in the zone or no resources, with an error code.
  x__xgafv: string, V1 error format.
    Allowed values
      1 - v1 error format
      2 - v2 error format

Returns:
  An object of the form:

    {
  "id": "A String", # [Output Only] Unique identifier for the resource; defined by the server.
  "items": [ # A list of NetworkEndpointWithHealthStatus resources.
    {
      "healths": [ # [Output only] The health status of network endpoint;
        {
          "backendService": { # URL of the backend service associated with the health state of the network endpoint.
            "backendService": "A String",
          },
          "forwardingRule": { # URL of the forwarding rule associated with the health state of the network endpoint.
            "forwardingRule": "A String",
          },
          "healthCheck": { # A full or valid partial URL to a health check. For example, the following are valid URLs: - https://www.googleapis.com/compute/beta/projects/project-id/global/httpHealthChecks/health-check - projects/project-id/global/httpHealthChecks/health-check - global/httpHealthChecks/health-check # URL of the health check associated with the health state of the network endpoint.
            "healthCheck": "A String",
          },
          "healthCheckService": { # A full or valid partial URL to a health check service. For example, the following are valid URLs: - https://www.googleapis.com/compute/beta/projects/project-id/regions/us-west1/healthCheckServices/health-check-service - projects/project-id/regions/us-west1/healthCheckServices/health-check-service - regions/us-west1/healthCheckServices/health-check-service # URL of the health check service associated with the health state of the network endpoint.
            "healthCheckService": "A String",
          },
          "healthState": "A String", # Health state of the network endpoint determined based on the health checks configured.
          "ipv6HealthState": "A String", # Health state of the ipv6 network endpoint determined based on the health checks configured.
        },
      ],
      "networkEndpoint": { # The network endpoint. # [Output only] The network endpoint;
        "annotations": { # Metadata defined as annotations on the network endpoint.
          "a_key": "A String",
        },
        "clientPort": 42, # Represents the port number to which PSC consumer sends packets. Only valid for network endpoint groups created with CLIENT_PORT_PER_ENDPOINT mapping mode.
        "fqdn": "A String", # Optional fully qualified domain name of network endpoint. This can only be specified when NetworkEndpointGroup.network_endpoint_type is NON_GCP_FQDN_PORT.
        "instance": "A String", # The name or a URL of VM instance of this network endpoint. This field is required for network endpoints of type GCE_VM_IP and GCE_VM_IP_PORT. The instance must be in the same zone of network endpoint group (for zonal NEGs) or in the zone within the region of the NEG (for regional NEGs). If the ipAddress is specified, it must belongs to the VM instance. The name must be 1-63 characters long, and comply with RFC1035 or be a valid URL pointing to an existing instance.
        "ipAddress": "A String", # Optional IPv4 address of network endpoint. The IP address must belong to a VM in Compute Engine (either the primary IP or as part of an aliased IP range). If the IP address is not specified, then the primary IP address for the VM instance in the network that the network endpoint group belongs to will be used. This field is redundant and need not be set for network endpoints of type GCE_VM_IP. If set, it must be set to the primary internal IP address of the attached VM instance that matches the subnetwork of the NEG. The primary internal IP address from any NIC of a multi-NIC VM instance can be added to a NEG as long as it matches the NEG subnetwork.
        "ipv6Address": "A String", # Optional IPv6 address of network endpoint.
        "port": 42, # Optional port number of network endpoint. If not specified, the defaultPort for the network endpoint group will be used. This field can not be set for network endpoints of type GCE_VM_IP.
      },
    },
  ],
  "kind": "compute#networkEndpointGroupsListNetworkEndpoints", # [Output Only] The resource type, which is always compute#networkEndpointGroupsListNetworkEndpoints for the list of network endpoints in the specified network endpoint group.
  "nextPageToken": "A String", # [Output Only] This token allows you to get the next page of results for list requests. If the number of results is larger than maxResults, use the nextPageToken as a value for the query parameter pageToken in the next list request. Subsequent list requests will have their own nextPageToken to continue paging through the results.
  "warning": { # [Output Only] Informational warning message.
    "code": "A String", # [Output Only] A warning code, if applicable. For example, Compute Engine returns NO_RESULTS_ON_PAGE if there are no results in the response.
    "data": [ # [Output Only] Metadata about this warning in key: value format. For example: "data": [ { "key": "scope", "value": "zones/us-east1-d" }
      {
        "key": "A String", # [Output Only] A key that provides more detail on the warning being returned. For example, for warnings where there are no results in a list request for a particular zone, this key might be scope and the key value might be the zone name. Other examples might be a key indicating a deprecated resource and a suggested replacement, or a warning about invalid network settings (for example, if an instance attempts to perform IP forwarding but is not enabled for IP forwarding).
        "value": "A String", # [Output Only] A warning data value corresponding to the key.
      },
    ],
    "message": "A String", # [Output Only] A human-readable description of the warning code.
  },
}
listNetworkEndpoints_next()
Retrieves the next page of results.

        Args:
          previous_request: The request for the previous page. (required)
          previous_response: The response from the request for the previous page. (required)

        Returns:
          A request object that you can call 'execute()' on to request the next
          page. Returns None if there are no more items in the collection.
        
list_next()
Retrieves the next page of results.

        Args:
          previous_request: The request for the previous page. (required)
          previous_response: The response from the request for the previous page. (required)

        Returns:
          A request object that you can call 'execute()' on to request the next
          page. Returns None if there are no more items in the collection.