aggregatedList(project, filter=None, includeAllScopes=None, maxResults=None, orderBy=None, pageToken=None, returnPartialSuccess=None, serviceProjectNumber=None, x__xgafv=None)

Retrieves an aggregated list of routers. To prevent failure, Google recommends that you set the `returnPartialSuccess` parameter to `true`.

Args:
project: string, Project ID for this request. (required)
filter: string, A filter expression that filters resources listed in the response. Most Compute resources support two types of filter expressions: expressions that support regular expressions and expressions that follow API improvement proposal AIP-160. These two types of filter expressions cannot be mixed in one request. If you want to use AIP-160, your expression must specify the field name, an operator, and the value that you want to use for filtering. The value must be a string, a number, or a boolean. The operator must be either `=`, `!=`, `>`, `<`, `<=`, `>=` or `:`. For example, if you are filtering Compute Engine instances, you can exclude instances named `example-instance` by specifying `name != example-instance`. The `:*` comparison can be used to test whether a key has been defined. For example, to find all objects with `owner` label use: ``` labels.owner:* ``` You can also filter nested fields. For example, you could specify `scheduling.automaticRestart = false` to include instances only if they are not scheduled for automatic restarts. You can use filtering on nested fields to filter based on resource labels. To filter on multiple expressions, provide each separate expression within parentheses. For example: ``` (scheduling.automaticRestart = true) (cpuPlatform = "Intel Skylake") ``` By default, each expression is an `AND` expression. However, you can include `AND` and `OR` expressions explicitly. For example: ``` (cpuPlatform = "Intel Skylake") OR (cpuPlatform = "Intel Broadwell") AND (scheduling.automaticRestart = true) ``` If you want to use a regular expression, use the `eq` (equal) or `ne` (not equal) operator against a single un-parenthesized expression with or without quotes or against multiple parenthesized expressions. Examples: `fieldname eq unquoted literal` `fieldname eq 'single quoted literal'` `fieldname eq "double quoted literal"` `(fieldname1 eq literal) (fieldname2 ne "literal")` The literal value is interpreted as a regular expression using Google RE2 library syntax. The literal value must match the entire field. For example, to filter for instances that do not end with name "instance", you would use `name ne .*instance`. You cannot combine constraints on multiple fields using regular expressions.
includeAllScopes: boolean, Indicates whether every visible scope for each scope type (zone, region, global) should be included in the response. For new resource types added after this field, the flag has no effect as new resource types will always include every visible scope for each scope type in response. For resource types which predate this field, if this flag is omitted or false, only scopes of the scope types where the resource type is expected to be found will be included.
maxResults: integer, The maximum number of results per page that should be returned. If the number of available results is larger than `maxResults`, Compute Engine returns a `nextPageToken` that can be used to get the next page of results in subsequent list requests. Acceptable values are `0` to `500`, inclusive. (Default: `500`)
orderBy: string, Sorts list results by a certain order. By default, results are returned in alphanumerical order based on the resource name. You can also sort results in descending order based on the creation timestamp using `orderBy="creationTimestamp desc"`. This sorts results based on the `creationTimestamp` field in reverse chronological order (newest result first). Use this to sort resources like operations so that the newest operation is returned first. Currently, only sorting by `name` or `creationTimestamp desc` is supported.
pageToken: string, Specifies a page token to use. Set `pageToken` to the `nextPageToken` returned by a previous list request to get the next page of results.
returnPartialSuccess: boolean, Opt-in for partial success behavior which provides partial results in case of failure. The default value is false. For example, when partial success behavior is enabled, aggregatedList for a single zone scope either returns all resources in the zone or no resources, with an error code.
serviceProjectNumber: string, The Shared VPC service project id or service project number for which aggregated list request is invoked for subnetworks list-usable api.
x__xgafv: string, V1 error format.
Allowed values
1 - v1 error format
2 - v2 error format

Returns:
An object of the form:

{ # Contains a list of routers.
"id": "A String", # [Output Only] Unique identifier for the resource; defined by the server.
"items": { # A list of Router resources.
"a_key": { # Name of the scope containing this set of routers.
"routers": [ # A list of routers contained in this scope.
{ # Represents a Cloud Router resource. For more information about Cloud Router, read the Cloud Router overview.
"bgp": { # BGP information specific to this router.
"advertiseMode": "A String", # User-specified flag to indicate which mode to use for advertisement. The options are DEFAULT or CUSTOM.
"advertisedGroups": [ # User-specified list of prefix groups to advertise in custom mode. This field can only be populated if advertise_mode is CUSTOM and is advertised to all peers of the router. These groups will be advertised in addition to any specified prefixes. Leave this field blank to advertise no custom groups.
"A String",
],
"advertisedIpRanges": [ # User-specified list of individual IP ranges to advertise in custom mode. This field can only be populated if advertise_mode is CUSTOM and is advertised to all peers of the router. These IP ranges will be advertised in addition to any specified groups. Leave this field blank to advertise no custom IP ranges.
{ # Description-tagged IP ranges for the router to advertise.
"description": "A String", # User-specified description for the IP range.
"range": "A String", # The IP range to advertise. The value must be a CIDR-formatted string.
},
],
"asn": 42, # Local BGP Autonomous System Number (ASN). Must be an RFC6996 private ASN, either 16-bit or 32-bit. The value will be fixed for this router resource. All VPN tunnels that link to this router will have the same local ASN.
"identifierRange": "A String", # Explicitly specifies a range of valid BGP Identifiers for this Router. It is provided as a link-local IPv4 range (from 169.254.0.0/16), of size at least /30, even if the BGP sessions are over IPv6. It must not overlap with any IPv4 BGP session ranges. Other vendors commonly call this "router ID".
"keepaliveInterval": 42, # The interval in seconds between BGP keepalive messages that are sent to the peer. Hold time is three times the interval at which keepalive messages are sent, and the hold time is the maximum number of seconds allowed to elapse between successive keepalive messages that BGP receives from a peer. BGP will use the smaller of either the local hold time value or the peer's hold time value as the hold time for the BGP connection between the two peers. If set, this value must be between 20 and 60. The default is 20.
},
"bgpPeers": [ # BGP information that must be configured into the routing stack to establish BGP peering. This information must specify the peer ASN and either the interface name, IP address, or peer IP address. Please refer to RFC4273.
{
"advertiseMode": "A String", # User-specified flag to indicate which mode to use for advertisement.
"advertisedGroups": [ # User-specified list of prefix groups to advertise in custom mode, which currently supports the following option: - ALL_SUBNETS: Advertises all of the router's own VPC subnets. This excludes any routes learned for subnets that use VPC Network Peering. Note that this field can only be populated if advertise_mode is CUSTOM and overrides the list defined for the router (in the "bgp" message). These groups are advertised in addition to any specified prefixes. Leave this field blank to advertise no custom groups.
"A String",
],
"advertisedIpRanges": [ # User-specified list of individual IP ranges to advertise in custom mode. This field can only be populated if advertise_mode is CUSTOM and overrides the list defined for the router (in the "bgp" message). These IP ranges are advertised in addition to any specified groups. Leave this field blank to advertise no custom IP ranges.
{ # Description-tagged IP ranges for the router to advertise.
"description": "A String", # User-specified description for the IP range.
"range": "A String", # The IP range to advertise. The value must be a CIDR-formatted string.
},
],
"advertisedRoutePriority": 42, # The priority of routes advertised to this BGP peer. Where there is more than one matching route of maximum length, the routes with the lowest priority value win.
"bfd": { # BFD configuration for the BGP peering.
"minReceiveInterval": 42, # The minimum interval, in milliseconds, between BFD control packets received from the peer router. The actual value is negotiated between the two routers and is equal to the greater of this value and the transmit interval of the other router. If set, this value must be between 1000 and 30000. The default is 1000.
"minTransmitInterval": 42, # The minimum interval, in milliseconds, between BFD control packets transmitted to the peer router. The actual value is negotiated between the two routers and is equal to the greater of this value and the corresponding receive interval of the other router. If set, this value must be between 1000 and 30000. The default is 1000.
"multiplier": 42, # The number of consecutive BFD packets that must be missed before BFD declares that a peer is unavailable. If set, the value must be a value between 5 and 16. The default is 5.
"sessionInitializationMode": "A String", # The BFD session initialization mode for this BGP peer. If set to ACTIVE, the Cloud Router will initiate the BFD session for this BGP peer. If set to PASSIVE, the Cloud Router will wait for the peer router to initiate the BFD session for this BGP peer. If set to DISABLED, BFD is disabled for this BGP peer. The default is DISABLED.
},
"customLearnedIpRanges": [ # A list of user-defined custom learned route IP address ranges for a BGP session.
{
"range": "A String", # The custom learned route IP address range. Must be a valid CIDR-formatted prefix. If an IP address is provided without a subnet mask, it is interpreted as, for IPv4, a `/32` singular IP address range, and, for IPv6, `/128`.
},
],
"customLearnedRoutePriority": 42, # The user-defined custom learned route priority for a BGP session. This value is applied to all custom learned route ranges for the session. You can choose a value from `0` to `65335`. If you don't provide a value, Google Cloud assigns a priority of `100` to the ranges.
"enable": "A String", # The status of the BGP peer connection. If set to FALSE, any active session with the peer is terminated and all associated routing information is removed. If set to TRUE, the peer connection can be established with routing information. The default is TRUE.
"enableIpv4": True or False, # Enable IPv4 traffic over BGP Peer. It is enabled by default if the peerIpAddress is version 4.
"enableIpv6": True or False, # Enable IPv6 traffic over BGP Peer. It is enabled by default if the peerIpAddress is version 6.
"exportPolicies": [ # List of export policies applied to this peer, in the order they must be evaluated. The name must correspond to an existing policy that has ROUTE_POLICY_TYPE_EXPORT type. Note that Route Policies are currently available in preview. Please use Beta API to use Route Policies.
"A String",
],
"importPolicies": [ # List of import policies applied to this peer, in the order they must be evaluated. The name must correspond to an existing policy that has ROUTE_POLICY_TYPE_IMPORT type. Note that Route Policies are currently available in preview. Please use Beta API to use Route Policies.
"A String",
],
"interfaceName": "A String", # Name of the interface the BGP peer is associated with.
"ipAddress": "A String", # IP address of the interface inside Google Cloud Platform.
"ipv4NexthopAddress": "A String", # IPv4 address of the interface inside Google Cloud Platform.
"ipv6NexthopAddress": "A String", # IPv6 address of the interface inside Google Cloud Platform.
"managementType": "A String", # [Output Only] The resource that configures and manages this BGP peer. - MANAGED_BY_USER is the default value and can be managed by you or other users - MANAGED_BY_ATTACHMENT is a BGP peer that is configured and managed by Cloud Interconnect, specifically by an InterconnectAttachment of type PARTNER. Google automatically creates, updates, and deletes this type of BGP peer when the PARTNER InterconnectAttachment is created, updated, or deleted.
"md5AuthenticationKeyName": "A String", # Present if MD5 authentication is enabled for the peering. Must be the name of one of the entries in the Router.md5_authentication_keys. The field must comply with RFC1035.
"name": "A String", # Name of this BGP peer. The name must be 1-63 characters long, and comply with RFC1035. Specifically, the name must be 1-63 characters long and match the regular expression `[a-z]([-a-z0-9]*[a-z0-9])?` which means the first character must be a lowercase letter, and all following characters must be a dash, lowercase letter, or digit, except the last character, which cannot be a dash.
"peerAsn": 42, # Peer BGP Autonomous System Number (ASN). Each BGP interface may use a different value.
"peerIpAddress": "A String", # IP address of the BGP interface outside Google Cloud Platform.
"peerIpv4NexthopAddress": "A String", # IPv4 address of the BGP interface outside Google Cloud Platform.
"peerIpv6NexthopAddress": "A String", # IPv6 address of the BGP interface outside Google Cloud Platform.
"routerApplianceInstance": "A String", # URI of the VM instance that is used as third-party router appliances such as Next Gen Firewalls, Virtual Routers, or Router Appliances. The VM instance must be located in zones contained in the same region as this Cloud Router. The VM instance is the peer side of the BGP session.
},
],
"creationTimestamp": "A String", # [Output Only] Creation timestamp in RFC3339 text format.
"description": "A String", # An optional description of this resource. Provide this property when you create the resource.
"encryptedInterconnectRouter": True or False, # Indicates if a router is dedicated for use with encrypted VLAN attachments (interconnectAttachments).
"id": "A String", # [Output Only] The unique identifier for the resource. This identifier is defined by the server.
"interfaces": [ # Router interfaces. To create a BGP peer that uses a router interface, the interface must have one of the following fields specified: - linkedVpnTunnel - linkedInterconnectAttachment - subnetwork You can create a router interface without any of these fields specified. However, you cannot create a BGP peer that uses that interface.
{
"ipRange": "A String", # IP address and range of the interface. - For Internet Protocol version 4 (IPv4), the IP range must be in the RFC3927 link-local IP address space. The value must be a CIDR-formatted string, for example, 169.254.0.1/30. Note: Do not truncate the IP address, as it represents the IP address of the interface. - For Internet Protocol version 6 (IPv6), the value must be a unique local address (ULA) range from fdff:1::/64 with a mask length of 126 or less. This value should be a CIDR-formatted string, for example, fc00:0:1:1::1/112. Within the router's VPC, this IPv6 prefix will be reserved exclusively for this connection and cannot be used for any other purpose.
"ipVersion": "A String", # IP version of this interface.
"linkedInterconnectAttachment": "A String", # URI of the linked Interconnect attachment. It must be in the same region as the router. Each interface can have one linked resource, which can be a VPN tunnel, an Interconnect attachment, or a subnetwork.
"linkedVpnTunnel": "A String", # URI of the linked VPN tunnel, which must be in the same region as the router. Each interface can have one linked resource, which can be a VPN tunnel, an Interconnect attachment, or a subnetwork.
"managementType": "A String", # [Output Only] The resource that configures and manages this interface. - MANAGED_BY_USER is the default value and can be managed directly by users. - MANAGED_BY_ATTACHMENT is an interface that is configured and managed by Cloud Interconnect, specifically, by an InterconnectAttachment of type PARTNER. Google automatically creates, updates, and deletes this type of interface when the PARTNER InterconnectAttachment is created, updated, or deleted.
"name": "A String", # Name of this interface entry. The name must be 1-63 characters long, and comply with RFC1035. Specifically, the name must be 1-63 characters long and match the regular expression `[a-z]([-a-z0-9]*[a-z0-9])?` which means the first character must be a lowercase letter, and all following characters must be a dash, lowercase letter, or digit, except the last character, which cannot be a dash.
"privateIpAddress": "A String", # The regional private internal IP address that is used to establish BGP sessions to a VM instance acting as a third-party Router Appliance, such as a Next Gen Firewall, a Virtual Router, or an SD-WAN VM.
"redundantInterface": "A String", # Name of the interface that will be redundant with the current interface you are creating. The redundantInterface must belong to the same Cloud Router as the interface here. To establish the BGP session to a Router Appliance VM, you must create two BGP peers. The two BGP peers must be attached to two separate interfaces that are redundant with each other. The redundant_interface must be 1-63 characters long, and comply with RFC1035. Specifically, the redundant_interface must be 1-63 characters long and match the regular expression `[a-z]([-a-z0-9]*[a-z0-9])?` which means the first character must be a lowercase letter, and all following characters must be a dash, lowercase letter, or digit, except the last character, which cannot be a dash.
"subnetwork": "A String", # The URI of the subnetwork resource that this interface belongs to, which must be in the same region as the Cloud Router. When you establish a BGP session to a VM instance using this interface, the VM instance must belong to the same subnetwork as the subnetwork specified here.
},
],
"kind": "compute#router", # [Output Only] Type of resource. Always compute#router for routers.
"md5AuthenticationKeys": [ # Keys used for MD5 authentication.
{
"key": "A String", # [Input only] Value of the key. For patch and update calls, it can be skipped to copy the value from the previous configuration. This is allowed if the key with the same name existed before the operation. Maximum length is 80 characters. Can only contain printable ASCII characters.
"name": "A String", # Name used to identify the key. Must be unique within a router. Must be referenced by exactly one bgpPeer. Must comply with RFC1035.
},
],
"name": "A String", # Name of the resource. Provided by the client when the resource is created. The name must be 1-63 characters long, and comply with RFC1035. Specifically, the name must be 1-63 characters long and match the regular expression `[a-z]([-a-z0-9]*[a-z0-9])?` which means the first character must be a lowercase letter, and all following characters must be a dash, lowercase letter, or digit, except the last character, which cannot be a dash.
"nats": [ # A list of NAT services created in this router.
{ # Represents a Nat resource. It enables the VMs within the specified subnetworks to access Internet without external IP addresses. It specifies a list of subnetworks (and the ranges within) that want to use NAT. Customers can also provide the external IPs that would be used for NAT. GCP would auto-allocate ephemeral IPs if no external IPs are provided.
"autoNetworkTier": "A String", # The network tier to use when automatically reserving NAT IP addresses. Must be one of: PREMIUM, STANDARD. If not specified, then the current project-level default tier is used.
"drainNatIps": [ # A list of URLs of the IP resources to be drained. These IPs must be valid static external IPs that have been assigned to the NAT. These IPs should be used for updating/patching a NAT only.
"A String",
],
"enableDynamicPortAllocation": True or False, # Enable Dynamic Port Allocation. If not specified, it is disabled by default. If set to true, - Dynamic Port Allocation will be enabled on this NAT config. - enableEndpointIndependentMapping cannot be set to true. - If minPorts is set, minPortsPerVm must be set to a power of two greater than or equal to 32. If minPortsPerVm is not set, a minimum of 32 ports will be allocated to a VM from this NAT config.
"enableEndpointIndependentMapping": True or False,
"endpointTypes": [ # List of NAT-ted endpoint types supported by the Nat Gateway. If the list is empty, then it will be equivalent to include ENDPOINT_TYPE_VM
"A String",
],
"icmpIdleTimeoutSec": 42, # Timeout (in seconds) for ICMP connections. Defaults to 30s if not set.
"logConfig": { # Configuration of logging on a NAT. # Configure logging on this NAT.
"enable": True or False, # Indicates whether or not to export logs. This is false by default.
"filter": "A String", # Specify the desired filtering of logs on this NAT. If unspecified, logs are exported for all connections handled by this NAT. This option can take one of the following values: - ERRORS_ONLY: Export logs only for connection failures. - TRANSLATIONS_ONLY: Export logs only for successful connections. - ALL: Export logs for all connections, successful and unsuccessful.
},
"maxPortsPerVm": 42, # Maximum number of ports allocated to a VM from this NAT config when Dynamic Port Allocation is enabled. If Dynamic Port Allocation is not enabled, this field has no effect. If Dynamic Port Allocation is enabled, and this field is set, it must be set to a power of two greater than minPortsPerVm, or 64 if minPortsPerVm is not set. If Dynamic Port Allocation is enabled and this field is not set, a maximum of 65536 ports will be allocated to a VM from this NAT config.
"minPortsPerVm": 42, # Minimum number of ports allocated to a VM from this NAT config. If not set, a default number of ports is allocated to a VM. This is rounded up to the nearest power of 2. For example, if the value of this field is 50, at least 64 ports are allocated to a VM.
"name": "A String", # Unique name of this Nat service. The name must be 1-63 characters long and comply with RFC1035.
"natIpAllocateOption": "A String", # Specify the NatIpAllocateOption, which can take one of the following values: - MANUAL_ONLY: Uses only Nat IP addresses provided by customers. When there are not enough specified Nat IPs, the Nat service fails for new VMs. - AUTO_ONLY: Nat IPs are allocated by Google Cloud Platform; customers can't specify any Nat IPs. When choosing AUTO_ONLY, then nat_ip should be empty.
"natIps": [ # A list of URLs of the IP resources used for this Nat service. These IP addresses must be valid static external IP addresses assigned to the project.
"A String",
],
"rules": [ # A list of rules associated with this NAT.
{
"action": { # The action to be enforced for traffic that matches this rule.
"sourceNatActiveIps": [ # A list of URLs of the IP resources used for this NAT rule. These IP addresses must be valid static external IP addresses assigned to the project. This field is used for public NAT.
"A String",
],
"sourceNatActiveRanges": [ # A list of URLs of the subnetworks used as source ranges for this NAT Rule. These subnetworks must have purpose set to PRIVATE_NAT. This field is used for private NAT.
"A String",
],
"sourceNatDrainIps": [ # A list of URLs of the IP resources to be drained. These IPs must be valid static external IPs that have been assigned to the NAT. These IPs should be used for updating/patching a NAT rule only. This field is used for public NAT.
"A String",
],
"sourceNatDrainRanges": [ # A list of URLs of subnetworks representing source ranges to be drained. This is only supported on patch/update, and these subnetworks must have previously been used as active ranges in this NAT Rule. This field is used for private NAT.
"A String",
],
},
"description": "A String", # An optional description of this rule.
"match": "A String", # CEL expression that specifies the match condition that egress traffic from a VM is evaluated against. If it evaluates to true, the corresponding `action` is enforced. The following examples are valid match expressions for public NAT: `inIpRange(destination.ip, '1.1.0.0/16') || inIpRange(destination.ip, '2.2.0.0/16')` `destination.ip == '1.1.0.1' || destination.ip == '8.8.8.8'` The following example is a valid match expression for private NAT: `nexthop.hub == '//networkconnectivity.googleapis.com/projects/my-project/locations/global/hubs/hub-1'`
"ruleNumber": 42, # An integer uniquely identifying a rule in the list. The rule number must be a positive value between 0 and 65000, and must be unique among rules within a NAT.
},
],
"sourceSubnetworkIpRangesToNat": "A String", # Specify the Nat option, which can take one of the following values: - ALL_SUBNETWORKS_ALL_IP_RANGES: All of the IP ranges in every Subnetwork are allowed to Nat. - ALL_SUBNETWORKS_ALL_PRIMARY_IP_RANGES: All of the primary IP ranges in every Subnetwork are allowed to Nat. - LIST_OF_SUBNETWORKS: A list of Subnetworks are allowed to Nat (specified in the field subnetwork below) The default is SUBNETWORK_IP_RANGE_TO_NAT_OPTION_UNSPECIFIED. Note that if this field contains ALL_SUBNETWORKS_ALL_IP_RANGES then there should not be any other Router.Nat section in any Router for this network in this region.
"subnetworks": [ # A list of Subnetwork resources whose traffic should be translated by NAT Gateway. It is used only when LIST_OF_SUBNETWORKS is selected for the SubnetworkIpRangeToNatOption above.
{ # Defines the IP ranges that want to use NAT for a subnetwork.
"name": "A String", # URL for the subnetwork resource that will use NAT.
"secondaryIpRangeNames": [ # A list of the secondary ranges of the Subnetwork that are allowed to use NAT. This can be populated only if "LIST_OF_SECONDARY_IP_RANGES" is one of the values in source_ip_ranges_to_nat.
"A String",
],
"sourceIpRangesToNat": [ # Specify the options for NAT ranges in the Subnetwork. All options of a single value are valid except NAT_IP_RANGE_OPTION_UNSPECIFIED. The only valid option with multiple values is: ["PRIMARY_IP_RANGE", "LIST_OF_SECONDARY_IP_RANGES"] Default: [ALL_IP_RANGES]
"A String",
],
},
],
"tcpEstablishedIdleTimeoutSec": 42, # Timeout (in seconds) for TCP established connections. Defaults to 1200s if not set.
"tcpTimeWaitTimeoutSec": 42, # Timeout (in seconds) for TCP connections that are in TIME_WAIT state. Defaults to 120s if not set.
"tcpTransitoryIdleTimeoutSec": 42, # Timeout (in seconds) for TCP transitory connections. Defaults to 30s if not set.
"type": "A String", # Indicates whether this NAT is used for public or private IP translation. If unspecified, it defaults to PUBLIC.
"udpIdleTimeoutSec": 42, # Timeout (in seconds) for UDP connections. Defaults to 30s if not set.
},
],
"network": "A String", # URI of the network to which this router belongs.
"region": "A String", # [Output Only] URI of the region where the router resides. You must specify this field as part of the HTTP request URL. It is not settable as a field in the request body.
"selfLink": "A String", # [Output Only] Server-defined URL for the resource.
},
],
"warning": { # Informational warning which replaces the list of routers when the list is empty.
"code": "A String", # [Output Only] A warning code, if applicable. For example, Compute Engine returns NO_RESULTS_ON_PAGE if there are no results in the response.
"data": [ # [Output Only] Metadata about this warning in key: value format. For example: "data": [ { "key": "scope", "value": "zones/us-east1-d" }
{
"key": "A String", # [Output Only] A key that provides more detail on the warning being returned. For example, for warnings where there are no results in a list request for a particular zone, this key might be scope and the key value might be the zone name. Other examples might be a key indicating a deprecated resource and a suggested replacement, or a warning about invalid network settings (for example, if an instance attempts to perform IP forwarding but is not enabled for IP forwarding).
"value": "A String", # [Output Only] A warning data value corresponding to the key.
},
],
"message": "A String", # [Output Only] A human-readable description of the warning code.
},
},
},
"kind": "compute#routerAggregatedList", # Type of resource.
"nextPageToken": "A String", # [Output Only] This token allows you to get the next page of results for list requests. If the number of results is larger than maxResults, use the nextPageToken as a value for the query parameter pageToken in the next list request. Subsequent list requests will have their own nextPageToken to continue paging through the results.
"selfLink": "A String", # [Output Only] Server-defined URL for this resource.
"unreachables": [ # [Output Only] Unreachable resources.
"A String",
],
"warning": { # [Output Only] Informational warning message.
"code": "A String", # [Output Only] A warning code, if applicable. For example, Compute Engine returns NO_RESULTS_ON_PAGE if there are no results in the response.
"data": [ # [Output Only] Metadata about this warning in key: value format. For example: "data": [ { "key": "scope", "value": "zones/us-east1-d" }
{
"key": "A String", # [Output Only] A key that provides more detail on the warning being returned. For example, for warnings where there are no results in a list request for a particular zone, this key might be scope and the key value might be the zone name. Other examples might be a key indicating a deprecated resource and a suggested replacement, or a warning about invalid network settings (for example, if an instance attempts to perform IP forwarding but is not enabled for IP forwarding).
"value": "A String", # [Output Only] A warning data value corresponding to the key.
},
],
"message": "A String", # [Output Only] A human-readable description of the warning code.
},
}

aggregatedList_next()

Retrieves the next page of results.

        Args:
          previous_request: The request for the previous page. (required)
          previous_response: The response from the request for the previous page. (required)

        Returns:
          A request object that you can call 'execute()' on to request the next
          page. Returns None if there are no more items in the collection.

close()

Close httplib2 connections.

delete(project, region, router, requestId=None, x__xgafv=None)

Deletes the specified Router resource.

Args:
  project: string, Project ID for this request. (required)
  region: string, Name of the region for this request. (required)
  router: string, Name of the Router resource to delete. (required)
  requestId: string, An optional request ID to identify requests. Specify a unique request ID so that if you must retry your request, the server will know to ignore the request if it has already been completed. For example, consider a situation where you make an initial request and the request times out. If you make the request again with the same request ID, the server can check if original operation with the same request ID was received, and if so, will ignore the second request. This prevents clients from accidentally creating duplicate commitments. The request ID must be a valid UUID with the exception that zero UUID is not supported ( 00000000-0000-0000-0000-000000000000).
  x__xgafv: string, V1 error format.
    Allowed values
      1 - v1 error format
      2 - v2 error format

Returns:
  An object of the form:

    { # Represents an Operation resource. Google Compute Engine has three Operation resources: * [Global](/compute/docs/reference/rest/beta/globalOperations) * [Regional](/compute/docs/reference/rest/beta/regionOperations) * [Zonal](/compute/docs/reference/rest/beta/zoneOperations) You can use an operation resource to manage asynchronous API requests. For more information, read Handling API responses. Operations can be global, regional or zonal. - For global operations, use the `globalOperations` resource. - For regional operations, use the `regionOperations` resource. - For zonal operations, use the `zoneOperations` resource. For more information, read Global, Regional, and Zonal Resources. Note that completed Operation resources have a limited retention period.
  "clientOperationId": "A String", # [Output Only] The value of `requestId` if you provided it in the request. Not present otherwise.
  "creationTimestamp": "A String", # [Deprecated] This field is deprecated.
  "description": "A String", # [Output Only] A textual description of the operation, which is set when the operation is created.
  "endTime": "A String", # [Output Only] The time that this operation was completed. This value is in RFC3339 text format.
  "error": { # [Output Only] If errors are generated during processing of the operation, this field will be populated.
    "errors": [ # [Output Only] The array of errors encountered while processing this operation.
      {
        "code": "A String", # [Output Only] The error type identifier for this error.
        "errorDetails": [ # [Output Only] An optional list of messages that contain the error details. There is a set of defined message types to use for providing details.The syntax depends on the error code. For example, QuotaExceededInfo will have details when the error code is QUOTA_EXCEEDED.
          {
            "errorInfo": { # Describes the cause of the error with structured details. Example of an error when contacting the "pubsub.googleapis.com" API when it is not enabled: { "reason": "API_DISABLED" "domain": "googleapis.com" "metadata": { "resource": "projects/123", "service": "pubsub.googleapis.com" } } This response indicates that the pubsub.googleapis.com API is not enabled. Example of an error that is returned when attempting to create a Spanner instance in a region that is out of stock: { "reason": "STOCKOUT" "domain": "spanner.googleapis.com", "metadata": { "availableRegions": "us-central1,us-east2" } }
              "domain": "A String", # The logical grouping to which the "reason" belongs. The error domain is typically the registered service name of the tool or product that generates the error. Example: "pubsub.googleapis.com". If the error is generated by some common infrastructure, the error domain must be a globally unique value that identifies the infrastructure. For Google API infrastructure, the error domain is "googleapis.com".
              "metadatas": { # Additional structured details about this error. Keys must match /a-z+/ but should ideally be lowerCamelCase. Also they must be limited to 64 characters in length. When identifying the current value of an exceeded limit, the units should be contained in the key, not the value. For example, rather than {"instanceLimit": "100/request"}, should be returned as, {"instanceLimitPerRequest": "100"}, if the client exceeds the number of instances that can be created in a single (batch) request.
                "a_key": "A String",
              },
              "reason": "A String", # The reason of the error. This is a constant value that identifies the proximate cause of the error. Error reasons are unique within a particular domain of errors. This should be at most 63 characters and match a regular expression of `A-Z+[A-Z0-9]`, which represents UPPER_SNAKE_CASE.
            },
            "help": { # Provides links to documentation or for performing an out of band action. For example, if a quota check failed with an error indicating the calling project hasn't enabled the accessed service, this can contain a URL pointing directly to the right place in the developer console to flip the bit.
              "links": [ # URL(s) pointing to additional information on handling the current error.
                { # Describes a URL link.
                  "description": "A String", # Describes what the link offers.
                  "url": "A String", # The URL of the link.
                },
              ],
            },
            "localizedMessage": { # Provides a localized error message that is safe to return to the user which can be attached to an RPC error.
              "locale": "A String", # The locale used following the specification defined at https://www.rfc-editor.org/rfc/bcp/bcp47.txt. Examples are: "en-US", "fr-CH", "es-MX"
              "message": "A String", # The localized error message in the above locale.
            },
            "quotaInfo": { # Additional details for quota exceeded error for resource quota.
              "dimensions": { # The map holding related quota dimensions.
                "a_key": "A String",
              },
              "futureLimit": 3.14, # Future quota limit being rolled out. The limit's unit depends on the quota type or metric.
              "limit": 3.14, # Current effective quota limit. The limit's unit depends on the quota type or metric.
              "limitName": "A String", # The name of the quota limit.
              "metricName": "A String", # The Compute Engine quota metric name.
              "rolloutStatus": "A String", # Rollout status of the future quota limit.
            },
          },
        ],
        "location": "A String", # [Output Only] Indicates the field in the request that caused the error. This property is optional.
        "message": "A String", # [Output Only] An optional, human-readable error message.
      },
    ],
  },
  "httpErrorMessage": "A String", # [Output Only] If the operation fails, this field contains the HTTP error message that was returned, such as `NOT FOUND`.
  "httpErrorStatusCode": 42, # [Output Only] If the operation fails, this field contains the HTTP error status code that was returned. For example, a `404` means the resource was not found.
  "id": "A String", # [Output Only] The unique identifier for the operation. This identifier is defined by the server.
  "insertTime": "A String", # [Output Only] The time that this operation was requested. This value is in RFC3339 text format.
  "instancesBulkInsertOperationMetadata": {
    "perLocationStatus": { # Status information per location (location name is key). Example key: zones/us-central1-a
      "a_key": {
        "createdVmCount": 42, # [Output Only] Count of VMs successfully created so far.
        "deletedVmCount": 42, # [Output Only] Count of VMs that got deleted during rollback.
        "failedToCreateVmCount": 42, # [Output Only] Count of VMs that started creating but encountered an error.
        "status": "A String", # [Output Only] Creation status of BulkInsert operation - information if the flow is rolling forward or rolling back.
        "targetVmCount": 42, # [Output Only] Count of VMs originally planned to be created.
      },
    },
  },
  "kind": "compute#operation", # [Output Only] Type of the resource. Always `compute#operation` for Operation resources.
  "name": "A String", # [Output Only] Name of the operation.
  "operationGroupId": "A String", # [Output Only] An ID that represents a group of operations, such as when a group of operations results from a `bulkInsert` API request.
  "operationType": "A String", # [Output Only] The type of operation, such as `insert`, `update`, or `delete`, and so on.
  "progress": 42, # [Output Only] An optional progress indicator that ranges from 0 to 100. There is no requirement that this be linear or support any granularity of operations. This should not be used to guess when the operation will be complete. This number should monotonically increase as the operation progresses.
  "region": "A String", # [Output Only] The URL of the region where the operation resides. Only applicable when performing regional operations.
  "selfLink": "A String", # [Output Only] Server-defined URL for the resource.
  "setCommonInstanceMetadataOperationMetadata": { # [Output Only] If the operation is for projects.setCommonInstanceMetadata, this field will contain information on all underlying zonal actions and their state.
    "clientOperationId": "A String", # [Output Only] The client operation id.
    "perLocationOperations": { # [Output Only] Status information per location (location name is key). Example key: zones/us-central1-a
      "a_key": {
        "error": { # The `Status` type defines a logical error model that is suitable for different programming environments, including REST APIs and RPC APIs. It is used by [gRPC](https://github.com/grpc). Each `Status` message contains three pieces of data: error code, error message, and error details. You can find out more about this error model and how to work with it in the [API Design Guide](https://cloud.google.com/apis/design/errors). # [Output Only] If state is `ABANDONED` or `FAILED`, this field is populated.
          "code": 42, # The status code, which should be an enum value of google.rpc.Code.
          "details": [ # A list of messages that carry the error details. There is a common set of message types for APIs to use.
            {
              "a_key": "", # Properties of the object. Contains field @type with type URL.
            },
          ],
          "message": "A String", # A developer-facing error message, which should be in English. Any user-facing error message should be localized and sent in the google.rpc.Status.details field, or localized by the client.
        },
        "state": "A String", # [Output Only] Status of the action, which can be one of the following: `PROPAGATING`, `PROPAGATED`, `ABANDONED`, `FAILED`, or `DONE`.
      },
    },
  },
  "startTime": "A String", # [Output Only] The time that this operation was started by the server. This value is in RFC3339 text format.
  "status": "A String", # [Output Only] The status of the operation, which can be one of the following: `PENDING`, `RUNNING`, or `DONE`.
  "statusMessage": "A String", # [Output Only] An optional textual description of the current status of the operation.
  "targetId": "A String", # [Output Only] The unique target ID, which identifies a specific incarnation of the target resource.
  "targetLink": "A String", # [Output Only] The URL of the resource that the operation modifies. For operations related to creating a snapshot, this points to the disk that the snapshot was created from.
  "user": "A String", # [Output Only] User who requested the operation, for example: `user@example.com` or `alice_smith_identifier (global/workforcePools/example-com-us-employees)`.
  "warnings": [ # [Output Only] If warning messages are generated during processing of the operation, this field will be populated.
    {
      "code": "A String", # [Output Only] A warning code, if applicable. For example, Compute Engine returns NO_RESULTS_ON_PAGE if there are no results in the response.
      "data": [ # [Output Only] Metadata about this warning in key: value format. For example: "data": [ { "key": "scope", "value": "zones/us-east1-d" }
        {
          "key": "A String", # [Output Only] A key that provides more detail on the warning being returned. For example, for warnings where there are no results in a list request for a particular zone, this key might be scope and the key value might be the zone name. Other examples might be a key indicating a deprecated resource and a suggested replacement, or a warning about invalid network settings (for example, if an instance attempts to perform IP forwarding but is not enabled for IP forwarding).
          "value": "A String", # [Output Only] A warning data value corresponding to the key.
        },
      ],
      "message": "A String", # [Output Only] A human-readable description of the warning code.
    },
  ],
  "zone": "A String", # [Output Only] The URL of the zone where the operation resides. Only applicable when performing per-zone operations.
}

deleteRoutePolicy(project, region, router, policy=None, requestId=None, x__xgafv=None)

Deletes Route Policy

Args:
  project: string, Project ID for this request. (required)
  region: string, Name of the region for this request. (required)
  router: string, Name of the Router resource where Route Policy is defined. (required)
  policy: string, The Policy name for this request. Name must conform to RFC1035
  requestId: string, An optional request ID to identify requests. Specify a unique request ID so that if you must retry your request, the server will know to ignore the request if it has already been completed. For example, consider a situation where you make an initial request and the request times out. If you make the request again with the same request ID, the server can check if original operation with the same request ID was received, and if so, will ignore the second request. This prevents clients from accidentally creating duplicate commitments. The request ID must be a valid UUID with the exception that zero UUID is not supported ( 00000000-0000-0000-0000-000000000000).
  x__xgafv: string, V1 error format.
    Allowed values
      1 - v1 error format
      2 - v2 error format

Returns:
  An object of the form:

    { # Represents an Operation resource. Google Compute Engine has three Operation resources: * [Global](/compute/docs/reference/rest/beta/globalOperations) * [Regional](/compute/docs/reference/rest/beta/regionOperations) * [Zonal](/compute/docs/reference/rest/beta/zoneOperations) You can use an operation resource to manage asynchronous API requests. For more information, read Handling API responses. Operations can be global, regional or zonal. - For global operations, use the `globalOperations` resource. - For regional operations, use the `regionOperations` resource. - For zonal operations, use the `zoneOperations` resource. For more information, read Global, Regional, and Zonal Resources. Note that completed Operation resources have a limited retention period.
  "clientOperationId": "A String", # [Output Only] The value of `requestId` if you provided it in the request. Not present otherwise.
  "creationTimestamp": "A String", # [Deprecated] This field is deprecated.
  "description": "A String", # [Output Only] A textual description of the operation, which is set when the operation is created.
  "endTime": "A String", # [Output Only] The time that this operation was completed. This value is in RFC3339 text format.
  "error": { # [Output Only] If errors are generated during processing of the operation, this field will be populated.
    "errors": [ # [Output Only] The array of errors encountered while processing this operation.
      {
        "code": "A String", # [Output Only] The error type identifier for this error.
        "errorDetails": [ # [Output Only] An optional list of messages that contain the error details. There is a set of defined message types to use for providing details.The syntax depends on the error code. For example, QuotaExceededInfo will have details when the error code is QUOTA_EXCEEDED.
          {
            "errorInfo": { # Describes the cause of the error with structured details. Example of an error when contacting the "pubsub.googleapis.com" API when it is not enabled: { "reason": "API_DISABLED" "domain": "googleapis.com" "metadata": { "resource": "projects/123", "service": "pubsub.googleapis.com" } } This response indicates that the pubsub.googleapis.com API is not enabled. Example of an error that is returned when attempting to create a Spanner instance in a region that is out of stock: { "reason": "STOCKOUT" "domain": "spanner.googleapis.com", "metadata": { "availableRegions": "us-central1,us-east2" } }
              "domain": "A String", # The logical grouping to which the "reason" belongs. The error domain is typically the registered service name of the tool or product that generates the error. Example: "pubsub.googleapis.com". If the error is generated by some common infrastructure, the error domain must be a globally unique value that identifies the infrastructure. For Google API infrastructure, the error domain is "googleapis.com".
              "metadatas": { # Additional structured details about this error. Keys must match /a-z+/ but should ideally be lowerCamelCase. Also they must be limited to 64 characters in length. When identifying the current value of an exceeded limit, the units should be contained in the key, not the value. For example, rather than {"instanceLimit": "100/request"}, should be returned as, {"instanceLimitPerRequest": "100"}, if the client exceeds the number of instances that can be created in a single (batch) request.
                "a_key": "A String",
              },
              "reason": "A String", # The reason of the error. This is a constant value that identifies the proximate cause of the error. Error reasons are unique within a particular domain of errors. This should be at most 63 characters and match a regular expression of `A-Z+[A-Z0-9]`, which represents UPPER_SNAKE_CASE.
            },
            "help": { # Provides links to documentation or for performing an out of band action. For example, if a quota check failed with an error indicating the calling project hasn't enabled the accessed service, this can contain a URL pointing directly to the right place in the developer console to flip the bit.
              "links": [ # URL(s) pointing to additional information on handling the current error.
                { # Describes a URL link.
                  "description": "A String", # Describes what the link offers.
                  "url": "A String", # The URL of the link.
                },
              ],
            },
            "localizedMessage": { # Provides a localized error message that is safe to return to the user which can be attached to an RPC error.
              "locale": "A String", # The locale used following the specification defined at https://www.rfc-editor.org/rfc/bcp/bcp47.txt. Examples are: "en-US", "fr-CH", "es-MX"
              "message": "A String", # The localized error message in the above locale.
            },
            "quotaInfo": { # Additional details for quota exceeded error for resource quota.
              "dimensions": { # The map holding related quota dimensions.
                "a_key": "A String",
              },
              "futureLimit": 3.14, # Future quota limit being rolled out. The limit's unit depends on the quota type or metric.
              "limit": 3.14, # Current effective quota limit. The limit's unit depends on the quota type or metric.
              "limitName": "A String", # The name of the quota limit.
              "metricName": "A String", # The Compute Engine quota metric name.
              "rolloutStatus": "A String", # Rollout status of the future quota limit.
            },
          },
        ],
        "location": "A String", # [Output Only] Indicates the field in the request that caused the error. This property is optional.
        "message": "A String", # [Output Only] An optional, human-readable error message.
      },
    ],
  },
  "httpErrorMessage": "A String", # [Output Only] If the operation fails, this field contains the HTTP error message that was returned, such as `NOT FOUND`.
  "httpErrorStatusCode": 42, # [Output Only] If the operation fails, this field contains the HTTP error status code that was returned. For example, a `404` means the resource was not found.
  "id": "A String", # [Output Only] The unique identifier for the operation. This identifier is defined by the server.
  "insertTime": "A String", # [Output Only] The time that this operation was requested. This value is in RFC3339 text format.
  "instancesBulkInsertOperationMetadata": {
    "perLocationStatus": { # Status information per location (location name is key). Example key: zones/us-central1-a
      "a_key": {
        "createdVmCount": 42, # [Output Only] Count of VMs successfully created so far.
        "deletedVmCount": 42, # [Output Only] Count of VMs that got deleted during rollback.
        "failedToCreateVmCount": 42, # [Output Only] Count of VMs that started creating but encountered an error.
        "status": "A String", # [Output Only] Creation status of BulkInsert operation - information if the flow is rolling forward or rolling back.
        "targetVmCount": 42, # [Output Only] Count of VMs originally planned to be created.
      },
    },
  },
  "kind": "compute#operation", # [Output Only] Type of the resource. Always `compute#operation` for Operation resources.
  "name": "A String", # [Output Only] Name of the operation.
  "operationGroupId": "A String", # [Output Only] An ID that represents a group of operations, such as when a group of operations results from a `bulkInsert` API request.
  "operationType": "A String", # [Output Only] The type of operation, such as `insert`, `update`, or `delete`, and so on.
  "progress": 42, # [Output Only] An optional progress indicator that ranges from 0 to 100. There is no requirement that this be linear or support any granularity of operations. This should not be used to guess when the operation will be complete. This number should monotonically increase as the operation progresses.
  "region": "A String", # [Output Only] The URL of the region where the operation resides. Only applicable when performing regional operations.
  "selfLink": "A String", # [Output Only] Server-defined URL for the resource.
  "setCommonInstanceMetadataOperationMetadata": { # [Output Only] If the operation is for projects.setCommonInstanceMetadata, this field will contain information on all underlying zonal actions and their state.
    "clientOperationId": "A String", # [Output Only] The client operation id.
    "perLocationOperations": { # [Output Only] Status information per location (location name is key). Example key: zones/us-central1-a
      "a_key": {
        "error": { # The `Status` type defines a logical error model that is suitable for different programming environments, including REST APIs and RPC APIs. It is used by [gRPC](https://github.com/grpc). Each `Status` message contains three pieces of data: error code, error message, and error details. You can find out more about this error model and how to work with it in the [API Design Guide](https://cloud.google.com/apis/design/errors). # [Output Only] If state is `ABANDONED` or `FAILED`, this field is populated.
          "code": 42, # The status code, which should be an enum value of google.rpc.Code.
          "details": [ # A list of messages that carry the error details. There is a common set of message types for APIs to use.
            {
              "a_key": "", # Properties of the object. Contains field @type with type URL.
            },
          ],
          "message": "A String", # A developer-facing error message, which should be in English. Any user-facing error message should be localized and sent in the google.rpc.Status.details field, or localized by the client.
        },
        "state": "A String", # [Output Only] Status of the action, which can be one of the following: `PROPAGATING`, `PROPAGATED`, `ABANDONED`, `FAILED`, or `DONE`.
      },
    },
  },
  "startTime": "A String", # [Output Only] The time that this operation was started by the server. This value is in RFC3339 text format.
  "status": "A String", # [Output Only] The status of the operation, which can be one of the following: `PENDING`, `RUNNING`, or `DONE`.
  "statusMessage": "A String", # [Output Only] An optional textual description of the current status of the operation.
  "targetId": "A String", # [Output Only] The unique target ID, which identifies a specific incarnation of the target resource.
  "targetLink": "A String", # [Output Only] The URL of the resource that the operation modifies. For operations related to creating a snapshot, this points to the disk that the snapshot was created from.
  "user": "A String", # [Output Only] User who requested the operation, for example: `user@example.com` or `alice_smith_identifier (global/workforcePools/example-com-us-employees)`.
  "warnings": [ # [Output Only] If warning messages are generated during processing of the operation, this field will be populated.
    {
      "code": "A String", # [Output Only] A warning code, if applicable. For example, Compute Engine returns NO_RESULTS_ON_PAGE if there are no results in the response.
      "data": [ # [Output Only] Metadata about this warning in key: value format. For example: "data": [ { "key": "scope", "value": "zones/us-east1-d" }
        {
          "key": "A String", # [Output Only] A key that provides more detail on the warning being returned. For example, for warnings where there are no results in a list request for a particular zone, this key might be scope and the key value might be the zone name. Other examples might be a key indicating a deprecated resource and a suggested replacement, or a warning about invalid network settings (for example, if an instance attempts to perform IP forwarding but is not enabled for IP forwarding).
          "value": "A String", # [Output Only] A warning data value corresponding to the key.
        },
      ],
      "message": "A String", # [Output Only] A human-readable description of the warning code.
    },
  ],
  "zone": "A String", # [Output Only] The URL of the zone where the operation resides. Only applicable when performing per-zone operations.
}

get(project, region, router, x__xgafv=None)

Returns the specified Router resource.

Args:
project: string, Project ID for this request. (required)
region: string, Name of the region for this request. (required)
router: string, Name of the Router resource to return. (required)
x__xgafv: string, V1 error format.
Allowed values
1 - v1 error format
2 - v2 error format

Returns:
An object of the form:

{ # Represents a Cloud Router resource. For more information about Cloud Router, read the Cloud Router overview.
"bgp": { # BGP information specific to this router.
"advertiseMode": "A String", # User-specified flag to indicate which mode to use for advertisement. The options are DEFAULT or CUSTOM.
"advertisedGroups": [ # User-specified list of prefix groups to advertise in custom mode. This field can only be populated if advertise_mode is CUSTOM and is advertised to all peers of the router. These groups will be advertised in addition to any specified prefixes. Leave this field blank to advertise no custom groups.
"A String",
],
"advertisedIpRanges": [ # User-specified list of individual IP ranges to advertise in custom mode. This field can only be populated if advertise_mode is CUSTOM and is advertised to all peers of the router. These IP ranges will be advertised in addition to any specified groups. Leave this field blank to advertise no custom IP ranges.
{ # Description-tagged IP ranges for the router to advertise.
"description": "A String", # User-specified description for the IP range.
"range": "A String", # The IP range to advertise. The value must be a CIDR-formatted string.
},
],
"asn": 42, # Local BGP Autonomous System Number (ASN). Must be an RFC6996 private ASN, either 16-bit or 32-bit. The value will be fixed for this router resource. All VPN tunnels that link to this router will have the same local ASN.
"identifierRange": "A String", # Explicitly specifies a range of valid BGP Identifiers for this Router. It is provided as a link-local IPv4 range (from 169.254.0.0/16), of size at least /30, even if the BGP sessions are over IPv6. It must not overlap with any IPv4 BGP session ranges. Other vendors commonly call this "router ID".
"keepaliveInterval": 42, # The interval in seconds between BGP keepalive messages that are sent to the peer. Hold time is three times the interval at which keepalive messages are sent, and the hold time is the maximum number of seconds allowed to elapse between successive keepalive messages that BGP receives from a peer. BGP will use the smaller of either the local hold time value or the peer's hold time value as the hold time for the BGP connection between the two peers. If set, this value must be between 20 and 60. The default is 20.
},
"bgpPeers": [ # BGP information that must be configured into the routing stack to establish BGP peering. This information must specify the peer ASN and either the interface name, IP address, or peer IP address. Please refer to RFC4273.
{
"advertiseMode": "A String", # User-specified flag to indicate which mode to use for advertisement.
"advertisedGroups": [ # User-specified list of prefix groups to advertise in custom mode, which currently supports the following option: - ALL_SUBNETS: Advertises all of the router's own VPC subnets. This excludes any routes learned for subnets that use VPC Network Peering. Note that this field can only be populated if advertise_mode is CUSTOM and overrides the list defined for the router (in the "bgp" message). These groups are advertised in addition to any specified prefixes. Leave this field blank to advertise no custom groups.
"A String",
],
"advertisedIpRanges": [ # User-specified list of individual IP ranges to advertise in custom mode. This field can only be populated if advertise_mode is CUSTOM and overrides the list defined for the router (in the "bgp" message). These IP ranges are advertised in addition to any specified groups. Leave this field blank to advertise no custom IP ranges.
{ # Description-tagged IP ranges for the router to advertise.
"description": "A String", # User-specified description for the IP range.
"range": "A String", # The IP range to advertise. The value must be a CIDR-formatted string.
},
],
"advertisedRoutePriority": 42, # The priority of routes advertised to this BGP peer. Where there is more than one matching route of maximum length, the routes with the lowest priority value win.
"bfd": { # BFD configuration for the BGP peering.
"minReceiveInterval": 42, # The minimum interval, in milliseconds, between BFD control packets received from the peer router. The actual value is negotiated between the two routers and is equal to the greater of this value and the transmit interval of the other router. If set, this value must be between 1000 and 30000. The default is 1000.
"minTransmitInterval": 42, # The minimum interval, in milliseconds, between BFD control packets transmitted to the peer router. The actual value is negotiated between the two routers and is equal to the greater of this value and the corresponding receive interval of the other router. If set, this value must be between 1000 and 30000. The default is 1000.
"multiplier": 42, # The number of consecutive BFD packets that must be missed before BFD declares that a peer is unavailable. If set, the value must be a value between 5 and 16. The default is 5.
"sessionInitializationMode": "A String", # The BFD session initialization mode for this BGP peer. If set to ACTIVE, the Cloud Router will initiate the BFD session for this BGP peer. If set to PASSIVE, the Cloud Router will wait for the peer router to initiate the BFD session for this BGP peer. If set to DISABLED, BFD is disabled for this BGP peer. The default is DISABLED.
},
"customLearnedIpRanges": [ # A list of user-defined custom learned route IP address ranges for a BGP session.
{
"range": "A String", # The custom learned route IP address range. Must be a valid CIDR-formatted prefix. If an IP address is provided without a subnet mask, it is interpreted as, for IPv4, a `/32` singular IP address range, and, for IPv6, `/128`.
},
],
"customLearnedRoutePriority": 42, # The user-defined custom learned route priority for a BGP session. This value is applied to all custom learned route ranges for the session. You can choose a value from `0` to `65335`. If you don't provide a value, Google Cloud assigns a priority of `100` to the ranges.
"enable": "A String", # The status of the BGP peer connection. If set to FALSE, any active session with the peer is terminated and all associated routing information is removed. If set to TRUE, the peer connection can be established with routing information. The default is TRUE.
"enableIpv4": True or False, # Enable IPv4 traffic over BGP Peer. It is enabled by default if the peerIpAddress is version 4.
"enableIpv6": True or False, # Enable IPv6 traffic over BGP Peer. It is enabled by default if the peerIpAddress is version 6.
"exportPolicies": [ # List of export policies applied to this peer, in the order they must be evaluated. The name must correspond to an existing policy that has ROUTE_POLICY_TYPE_EXPORT type. Note that Route Policies are currently available in preview. Please use Beta API to use Route Policies.
"A String",
],
"importPolicies": [ # List of import policies applied to this peer, in the order they must be evaluated. The name must correspond to an existing policy that has ROUTE_POLICY_TYPE_IMPORT type. Note that Route Policies are currently available in preview. Please use Beta API to use Route Policies.
"A String",
],
"interfaceName": "A String", # Name of the interface the BGP peer is associated with.
"ipAddress": "A String", # IP address of the interface inside Google Cloud Platform.
"ipv4NexthopAddress": "A String", # IPv4 address of the interface inside Google Cloud Platform.
"ipv6NexthopAddress": "A String", # IPv6 address of the interface inside Google Cloud Platform.
"managementType": "A String", # [Output Only] The resource that configures and manages this BGP peer. - MANAGED_BY_USER is the default value and can be managed by you or other users - MANAGED_BY_ATTACHMENT is a BGP peer that is configured and managed by Cloud Interconnect, specifically by an InterconnectAttachment of type PARTNER. Google automatically creates, updates, and deletes this type of BGP peer when the PARTNER InterconnectAttachment is created, updated, or deleted.
"md5AuthenticationKeyName": "A String", # Present if MD5 authentication is enabled for the peering. Must be the name of one of the entries in the Router.md5_authentication_keys. The field must comply with RFC1035.
"name": "A String", # Name of this BGP peer. The name must be 1-63 characters long, and comply with RFC1035. Specifically, the name must be 1-63 characters long and match the regular expression `[a-z]([-a-z0-9]*[a-z0-9])?` which means the first character must be a lowercase letter, and all following characters must be a dash, lowercase letter, or digit, except the last character, which cannot be a dash.
"peerAsn": 42, # Peer BGP Autonomous System Number (ASN). Each BGP interface may use a different value.
"peerIpAddress": "A String", # IP address of the BGP interface outside Google Cloud Platform.
"peerIpv4NexthopAddress": "A String", # IPv4 address of the BGP interface outside Google Cloud Platform.
"peerIpv6NexthopAddress": "A String", # IPv6 address of the BGP interface outside Google Cloud Platform.
"routerApplianceInstance": "A String", # URI of the VM instance that is used as third-party router appliances such as Next Gen Firewalls, Virtual Routers, or Router Appliances. The VM instance must be located in zones contained in the same region as this Cloud Router. The VM instance is the peer side of the BGP session.
},
],
"creationTimestamp": "A String", # [Output Only] Creation timestamp in RFC3339 text format.
"description": "A String", # An optional description of this resource. Provide this property when you create the resource.
"encryptedInterconnectRouter": True or False, # Indicates if a router is dedicated for use with encrypted VLAN attachments (interconnectAttachments).
"id": "A String", # [Output Only] The unique identifier for the resource. This identifier is defined by the server.
"interfaces": [ # Router interfaces. To create a BGP peer that uses a router interface, the interface must have one of the following fields specified: - linkedVpnTunnel - linkedInterconnectAttachment - subnetwork You can create a router interface without any of these fields specified. However, you cannot create a BGP peer that uses that interface.
{
"ipRange": "A String", # IP address and range of the interface. - For Internet Protocol version 4 (IPv4), the IP range must be in the RFC3927 link-local IP address space. The value must be a CIDR-formatted string, for example, 169.254.0.1/30. Note: Do not truncate the IP address, as it represents the IP address of the interface. - For Internet Protocol version 6 (IPv6), the value must be a unique local address (ULA) range from fdff:1::/64 with a mask length of 126 or less. This value should be a CIDR-formatted string, for example, fc00:0:1:1::1/112. Within the router's VPC, this IPv6 prefix will be reserved exclusively for this connection and cannot be used for any other purpose.
"ipVersion": "A String", # IP version of this interface.
"linkedInterconnectAttachment": "A String", # URI of the linked Interconnect attachment. It must be in the same region as the router. Each interface can have one linked resource, which can be a VPN tunnel, an Interconnect attachment, or a subnetwork.
"linkedVpnTunnel": "A String", # URI of the linked VPN tunnel, which must be in the same region as the router. Each interface can have one linked resource, which can be a VPN tunnel, an Interconnect attachment, or a subnetwork.
"managementType": "A String", # [Output Only] The resource that configures and manages this interface. - MANAGED_BY_USER is the default value and can be managed directly by users. - MANAGED_BY_ATTACHMENT is an interface that is configured and managed by Cloud Interconnect, specifically, by an InterconnectAttachment of type PARTNER. Google automatically creates, updates, and deletes this type of interface when the PARTNER InterconnectAttachment is created, updated, or deleted.
"name": "A String", # Name of this interface entry. The name must be 1-63 characters long, and comply with RFC1035. Specifically, the name must be 1-63 characters long and match the regular expression `[a-z]([-a-z0-9]*[a-z0-9])?` which means the first character must be a lowercase letter, and all following characters must be a dash, lowercase letter, or digit, except the last character, which cannot be a dash.
"privateIpAddress": "A String", # The regional private internal IP address that is used to establish BGP sessions to a VM instance acting as a third-party Router Appliance, such as a Next Gen Firewall, a Virtual Router, or an SD-WAN VM.
"redundantInterface": "A String", # Name of the interface that will be redundant with the current interface you are creating. The redundantInterface must belong to the same Cloud Router as the interface here. To establish the BGP session to a Router Appliance VM, you must create two BGP peers. The two BGP peers must be attached to two separate interfaces that are redundant with each other. The redundant_interface must be 1-63 characters long, and comply with RFC1035. Specifically, the redundant_interface must be 1-63 characters long and match the regular expression `[a-z]([-a-z0-9]*[a-z0-9])?` which means the first character must be a lowercase letter, and all following characters must be a dash, lowercase letter, or digit, except the last character, which cannot be a dash.
"subnetwork": "A String", # The URI of the subnetwork resource that this interface belongs to, which must be in the same region as the Cloud Router. When you establish a BGP session to a VM instance using this interface, the VM instance must belong to the same subnetwork as the subnetwork specified here.
},
],
"kind": "compute#router", # [Output Only] Type of resource. Always compute#router for routers.
"md5AuthenticationKeys": [ # Keys used for MD5 authentication.
{
"key": "A String", # [Input only] Value of the key. For patch and update calls, it can be skipped to copy the value from the previous configuration. This is allowed if the key with the same name existed before the operation. Maximum length is 80 characters. Can only contain printable ASCII characters.
"name": "A String", # Name used to identify the key. Must be unique within a router. Must be referenced by exactly one bgpPeer. Must comply with RFC1035.
},
],
"name": "A String", # Name of the resource. Provided by the client when the resource is created. The name must be 1-63 characters long, and comply with RFC1035. Specifically, the name must be 1-63 characters long and match the regular expression `[a-z]([-a-z0-9]*[a-z0-9])?` which means the first character must be a lowercase letter, and all following characters must be a dash, lowercase letter, or digit, except the last character, which cannot be a dash.
"nats": [ # A list of NAT services created in this router.
{ # Represents a Nat resource. It enables the VMs within the specified subnetworks to access Internet without external IP addresses. It specifies a list of subnetworks (and the ranges within) that want to use NAT. Customers can also provide the external IPs that would be used for NAT. GCP would auto-allocate ephemeral IPs if no external IPs are provided.
"autoNetworkTier": "A String", # The network tier to use when automatically reserving NAT IP addresses. Must be one of: PREMIUM, STANDARD. If not specified, then the current project-level default tier is used.
"drainNatIps": [ # A list of URLs of the IP resources to be drained. These IPs must be valid static external IPs that have been assigned to the NAT. These IPs should be used for updating/patching a NAT only.
"A String",
],
"enableDynamicPortAllocation": True or False, # Enable Dynamic Port Allocation. If not specified, it is disabled by default. If set to true, - Dynamic Port Allocation will be enabled on this NAT config. - enableEndpointIndependentMapping cannot be set to true. - If minPorts is set, minPortsPerVm must be set to a power of two greater than or equal to 32. If minPortsPerVm is not set, a minimum of 32 ports will be allocated to a VM from this NAT config.
"enableEndpointIndependentMapping": True or False,
"endpointTypes": [ # List of NAT-ted endpoint types supported by the Nat Gateway. If the list is empty, then it will be equivalent to include ENDPOINT_TYPE_VM
"A String",
],
"icmpIdleTimeoutSec": 42, # Timeout (in seconds) for ICMP connections. Defaults to 30s if not set.
"logConfig": { # Configuration of logging on a NAT. # Configure logging on this NAT.
"enable": True or False, # Indicates whether or not to export logs. This is false by default.
"filter": "A String", # Specify the desired filtering of logs on this NAT. If unspecified, logs are exported for all connections handled by this NAT. This option can take one of the following values: - ERRORS_ONLY: Export logs only for connection failures. - TRANSLATIONS_ONLY: Export logs only for successful connections. - ALL: Export logs for all connections, successful and unsuccessful.
},
"maxPortsPerVm": 42, # Maximum number of ports allocated to a VM from this NAT config when Dynamic Port Allocation is enabled. If Dynamic Port Allocation is not enabled, this field has no effect. If Dynamic Port Allocation is enabled, and this field is set, it must be set to a power of two greater than minPortsPerVm, or 64 if minPortsPerVm is not set. If Dynamic Port Allocation is enabled and this field is not set, a maximum of 65536 ports will be allocated to a VM from this NAT config.
"minPortsPerVm": 42, # Minimum number of ports allocated to a VM from this NAT config. If not set, a default number of ports is allocated to a VM. This is rounded up to the nearest power of 2. For example, if the value of this field is 50, at least 64 ports are allocated to a VM.
"name": "A String", # Unique name of this Nat service. The name must be 1-63 characters long and comply with RFC1035.
"natIpAllocateOption": "A String", # Specify the NatIpAllocateOption, which can take one of the following values: - MANUAL_ONLY: Uses only Nat IP addresses provided by customers. When there are not enough specified Nat IPs, the Nat service fails for new VMs. - AUTO_ONLY: Nat IPs are allocated by Google Cloud Platform; customers can't specify any Nat IPs. When choosing AUTO_ONLY, then nat_ip should be empty.
"natIps": [ # A list of URLs of the IP resources used for this Nat service. These IP addresses must be valid static external IP addresses assigned to the project.
"A String",
],
"rules": [ # A list of rules associated with this NAT.
{
"action": { # The action to be enforced for traffic that matches this rule.
"sourceNatActiveIps": [ # A list of URLs of the IP resources used for this NAT rule. These IP addresses must be valid static external IP addresses assigned to the project. This field is used for public NAT.
"A String",
],
"sourceNatActiveRanges": [ # A list of URLs of the subnetworks used as source ranges for this NAT Rule. These subnetworks must have purpose set to PRIVATE_NAT. This field is used for private NAT.
"A String",
],
"sourceNatDrainIps": [ # A list of URLs of the IP resources to be drained. These IPs must be valid static external IPs that have been assigned to the NAT. These IPs should be used for updating/patching a NAT rule only. This field is used for public NAT.
"A String",
],
"sourceNatDrainRanges": [ # A list of URLs of subnetworks representing source ranges to be drained. This is only supported on patch/update, and these subnetworks must have previously been used as active ranges in this NAT Rule. This field is used for private NAT.
"A String",
],
},
"description": "A String", # An optional description of this rule.
"match": "A String", # CEL expression that specifies the match condition that egress traffic from a VM is evaluated against. If it evaluates to true, the corresponding `action` is enforced. The following examples are valid match expressions for public NAT: `inIpRange(destination.ip, '1.1.0.0/16') || inIpRange(destination.ip, '2.2.0.0/16')` `destination.ip == '1.1.0.1' || destination.ip == '8.8.8.8'` The following example is a valid match expression for private NAT: `nexthop.hub == '//networkconnectivity.googleapis.com/projects/my-project/locations/global/hubs/hub-1'`
"ruleNumber": 42, # An integer uniquely identifying a rule in the list. The rule number must be a positive value between 0 and 65000, and must be unique among rules within a NAT.
},
],
"sourceSubnetworkIpRangesToNat": "A String", # Specify the Nat option, which can take one of the following values: - ALL_SUBNETWORKS_ALL_IP_RANGES: All of the IP ranges in every Subnetwork are allowed to Nat. - ALL_SUBNETWORKS_ALL_PRIMARY_IP_RANGES: All of the primary IP ranges in every Subnetwork are allowed to Nat. - LIST_OF_SUBNETWORKS: A list of Subnetworks are allowed to Nat (specified in the field subnetwork below) The default is SUBNETWORK_IP_RANGE_TO_NAT_OPTION_UNSPECIFIED. Note that if this field contains ALL_SUBNETWORKS_ALL_IP_RANGES then there should not be any other Router.Nat section in any Router for this network in this region.
"subnetworks": [ # A list of Subnetwork resources whose traffic should be translated by NAT Gateway. It is used only when LIST_OF_SUBNETWORKS is selected for the SubnetworkIpRangeToNatOption above.
{ # Defines the IP ranges that want to use NAT for a subnetwork.
"name": "A String", # URL for the subnetwork resource that will use NAT.
"secondaryIpRangeNames": [ # A list of the secondary ranges of the Subnetwork that are allowed to use NAT. This can be populated only if "LIST_OF_SECONDARY_IP_RANGES" is one of the values in source_ip_ranges_to_nat.
"A String",
],
"sourceIpRangesToNat": [ # Specify the options for NAT ranges in the Subnetwork. All options of a single value are valid except NAT_IP_RANGE_OPTION_UNSPECIFIED. The only valid option with multiple values is: ["PRIMARY_IP_RANGE", "LIST_OF_SECONDARY_IP_RANGES"] Default: [ALL_IP_RANGES]
"A String",
],
},
],
"tcpEstablishedIdleTimeoutSec": 42, # Timeout (in seconds) for TCP established connections. Defaults to 1200s if not set.
"tcpTimeWaitTimeoutSec": 42, # Timeout (in seconds) for TCP connections that are in TIME_WAIT state. Defaults to 120s if not set.
"tcpTransitoryIdleTimeoutSec": 42, # Timeout (in seconds) for TCP transitory connections. Defaults to 30s if not set.
"type": "A String", # Indicates whether this NAT is used for public or private IP translation. If unspecified, it defaults to PUBLIC.
"udpIdleTimeoutSec": 42, # Timeout (in seconds) for UDP connections. Defaults to 30s if not set.
},
],
"network": "A String", # URI of the network to which this router belongs.
"region": "A String", # [Output Only] URI of the region where the router resides. You must specify this field as part of the HTTP request URL. It is not settable as a field in the request body.
"selfLink": "A String", # [Output Only] Server-defined URL for the resource.
}

getNatIpInfo(project, region, router, natName=None, x__xgafv=None)

Retrieves runtime NAT IP information.

Args:
  project: string, Project ID for this request. (required)
  region: string, Name of the region for this request. (required)
  router: string, Name of the Router resource to query for Nat IP information. The name should conform to RFC1035. (required)
  natName: string, Name of the nat service to filter the NAT IP information. If it is omitted, all nats for this router will be returned. Name should conform to RFC1035.
  x__xgafv: string, V1 error format.
    Allowed values
      1 - v1 error format
      2 - v2 error format

Returns:
  An object of the form:

    {
  "result": [ # [Output Only] A list of NAT IP information.
    { # Contains NAT IP information of a NAT config (i.e. usage status, mode).
      "natIpInfoMappings": [ # A list of all NAT IPs assigned to this NAT config.
        { # Contains information of a NAT IP.
          "mode": "A String", # Specifies whether NAT IP is auto or manual.
          "natIp": "A String", # NAT IP address. For example: 203.0.113.11.
          "usage": "A String", # Specifies whether NAT IP is currently serving at least one endpoint or not.
        },
      ],
      "natName": "A String", # Name of the NAT config which the NAT IP belongs to.
    },
  ],
}

getNatMappingInfo(project, region, router, filter=None, maxResults=None, natName=None, orderBy=None, pageToken=None, returnPartialSuccess=None, x__xgafv=None)

Retrieves runtime Nat mapping information of VM endpoints.

Args:
project: string, Project ID for this request. (required)
region: string, Name of the region for this request. (required)
router: string, Name of the Router resource to query for Nat Mapping information of VM endpoints. (required)
filter: string, A filter expression that filters resources listed in the response. Most Compute resources support two types of filter expressions: expressions that support regular expressions and expressions that follow API improvement proposal AIP-160. These two types of filter expressions cannot be mixed in one request. If you want to use AIP-160, your expression must specify the field name, an operator, and the value that you want to use for filtering. The value must be a string, a number, or a boolean. The operator must be either `=`, `!=`, `>`, `<`, `<=`, `>=` or `:`. For example, if you are filtering Compute Engine instances, you can exclude instances named `example-instance` by specifying `name != example-instance`. The `:*` comparison can be used to test whether a key has been defined. For example, to find all objects with `owner` label use: ``` labels.owner:* ``` You can also filter nested fields. For example, you could specify `scheduling.automaticRestart = false` to include instances only if they are not scheduled for automatic restarts. You can use filtering on nested fields to filter based on resource labels. To filter on multiple expressions, provide each separate expression within parentheses. For example: ``` (scheduling.automaticRestart = true) (cpuPlatform = "Intel Skylake") ``` By default, each expression is an `AND` expression. However, you can include `AND` and `OR` expressions explicitly. For example: ``` (cpuPlatform = "Intel Skylake") OR (cpuPlatform = "Intel Broadwell") AND (scheduling.automaticRestart = true) ``` If you want to use a regular expression, use the `eq` (equal) or `ne` (not equal) operator against a single un-parenthesized expression with or without quotes or against multiple parenthesized expressions. Examples: `fieldname eq unquoted literal` `fieldname eq 'single quoted literal'` `fieldname eq "double quoted literal"` `(fieldname1 eq literal) (fieldname2 ne "literal")` The literal value is interpreted as a regular expression using Google RE2 library syntax. The literal value must match the entire field. For example, to filter for instances that do not end with name "instance", you would use `name ne .*instance`. You cannot combine constraints on multiple fields using regular expressions.
maxResults: integer, The maximum number of results per page that should be returned. If the number of available results is larger than `maxResults`, Compute Engine returns a `nextPageToken` that can be used to get the next page of results in subsequent list requests. Acceptable values are `0` to `500`, inclusive. (Default: `500`)
natName: string, Name of the nat service to filter the Nat Mapping information. If it is omitted, all nats for this router will be returned. Name should conform to RFC1035.
orderBy: string, Sorts list results by a certain order. By default, results are returned in alphanumerical order based on the resource name. You can also sort results in descending order based on the creation timestamp using `orderBy="creationTimestamp desc"`. This sorts results based on the `creationTimestamp` field in reverse chronological order (newest result first). Use this to sort resources like operations so that the newest operation is returned first. Currently, only sorting by `name` or `creationTimestamp desc` is supported.
pageToken: string, Specifies a page token to use. Set `pageToken` to the `nextPageToken` returned by a previous list request to get the next page of results.
returnPartialSuccess: boolean, Opt-in for partial success behavior which provides partial results in case of failure. The default value is false. For example, when partial success behavior is enabled, aggregatedList for a single zone scope either returns all resources in the zone or no resources, with an error code.
x__xgafv: string, V1 error format.
Allowed values
1 - v1 error format
2 - v2 error format

Returns:
An object of the form:

{ # Contains a list of VmEndpointNatMappings.
"id": "A String", # [Output Only] The unique identifier for the resource. This identifier is defined by the server.
"kind": "compute#vmEndpointNatMappingsList", # [Output Only] Type of resource. Always compute#vmEndpointNatMappingsList for lists of Nat mappings of VM endpoints.
"nextPageToken": "A String", # [Output Only] This token allows you to get the next page of results for list requests. If the number of results is larger than maxResults, use the nextPageToken as a value for the query parameter pageToken in the next list request. Subsequent list requests will have their own nextPageToken to continue paging through the results.
"result": [ # [Output Only] A list of Nat mapping information of VM endpoints.
{ # Contain information of Nat mapping for a VM endpoint (i.e., NIC).
"instanceName": "A String", # Name of the VM instance which the endpoint belongs to
"interfaceNatMappings": [
{ # Contain information of Nat mapping for an interface of this endpoint.
"drainNatIpPortRanges": [ # List of all drain IP:port-range mappings assigned to this interface. These ranges are inclusive, that is, both the first and the last ports can be used for NAT. Example: ["2.2.2.2:12345-12355", "1.1.1.1:2234-2234"].
"A String",
],
"natIpPortRanges": [ # A list of all IP:port-range mappings assigned to this interface. These ranges are inclusive, that is, both the first and the last ports can be used for NAT. Example: ["2.2.2.2:12345-12355", "1.1.1.1:2234-2234"].
"A String",
],
"numTotalDrainNatPorts": 42, # Total number of drain ports across all NAT IPs allocated to this interface. It equals to the aggregated port number in the field drain_nat_ip_port_ranges.
"numTotalNatPorts": 42, # Total number of ports across all NAT IPs allocated to this interface. It equals to the aggregated port number in the field nat_ip_port_ranges.
"ruleMappings": [ # Information about mappings provided by rules in this NAT.
{ # Contains information of NAT Mappings provided by a NAT Rule.
"drainNatIpPortRanges": [ # List of all drain IP:port-range mappings assigned to this interface by this rule. These ranges are inclusive, that is, both the first and the last ports can be used for NAT. Example: ["2.2.2.2:12345-12355", "1.1.1.1:2234-2234"].
"A String",
],
"natIpPortRanges": [ # A list of all IP:port-range mappings assigned to this interface by this rule. These ranges are inclusive, that is, both the first and the last ports can be used for NAT. Example: ["2.2.2.2:12345-12355", "1.1.1.1:2234-2234"].
"A String",
],
"numTotalDrainNatPorts": 42, # Total number of drain ports across all NAT IPs allocated to this interface by this rule. It equals the aggregated port number in the field drain_nat_ip_port_ranges.
"numTotalNatPorts": 42, # Total number of ports across all NAT IPs allocated to this interface by this rule. It equals the aggregated port number in the field nat_ip_port_ranges.
"ruleNumber": 42, # Rule number of the NAT Rule.
},
],
"sourceAliasIpRange": "A String", # Alias IP range for this interface endpoint. It will be a private (RFC 1918) IP range. Examples: "10.33.4.55/32", or "192.168.5.0/24".
"sourceVirtualIp": "A String", # Primary IP of the VM for this NIC.
},
],
},
],
"selfLink": "A String", # [Output Only] Server-defined URL for this resource.
"warning": { # [Output Only] Informational warning message.
"code": "A String", # [Output Only] A warning code, if applicable. For example, Compute Engine returns NO_RESULTS_ON_PAGE if there are no results in the response.
"data": [ # [Output Only] Metadata about this warning in key: value format. For example: "data": [ { "key": "scope", "value": "zones/us-east1-d" }
{
"key": "A String", # [Output Only] A key that provides more detail on the warning being returned. For example, for warnings where there are no results in a list request for a particular zone, this key might be scope and the key value might be the zone name. Other examples might be a key indicating a deprecated resource and a suggested replacement, or a warning about invalid network settings (for example, if an instance attempts to perform IP forwarding but is not enabled for IP forwarding).
"value": "A String", # [Output Only] A warning data value corresponding to the key.
},
],
"message": "A String", # [Output Only] A human-readable description of the warning code.
},
}

getNatMappingInfo_next()

Retrieves the next page of results.

        Args:
          previous_request: The request for the previous page. (required)
          previous_response: The response from the request for the previous page. (required)

        Returns:
          A request object that you can call 'execute()' on to request the next
          page. Returns None if there are no more items in the collection.

getRoutePolicy(project, region, router, policy=None, x__xgafv=None)

Returns specified Route Policy

Args:
  project: string, Project ID for this request. (required)
  region: string, Name of the region for this request. (required)
  router: string, Name of the Router resource to query for the route policy. The name should conform to RFC1035. (required)
  policy: string, The Policy name for this request. Name must conform to RFC1035
  x__xgafv: string, V1 error format.
    Allowed values
      1 - v1 error format
      2 - v2 error format

Returns:
  An object of the form:

    {
  "resource": {
    "description": "A String", # An optional description of route policy.
    "fingerprint": "A String", # A fingerprint for the Route Policy being applied to this Router, which is essentially a hash of the Route Policy used for optimistic locking. The fingerprint is initially generated by Compute Engine and changes after every request to modify or update Route Policy. You must always provide an up-to-date fingerprint hash in order to update or change labels. To see the latest fingerprint, make a getRoutePolicy() request to retrieve a Route Policy.
    "name": "A String", # Route Policy name, which must be a resource ID segment and unique within all the router's Route Policies. Name should conform to RFC1035.
    "terms": [ # List of terms (the order in the list is not important, they are evaluated in order of priority). Order of policies is not retained and might change when getting policy later.
      {
        "actions": [ # CEL expressions to evaluate to modify a route when this term matches.
          { # Represents a textual expression in the Common Expression Language (CEL) syntax. CEL is a C-like expression language. The syntax and semantics of CEL are documented at https://github.com/google/cel-spec. Example (Comparison): title: "Summary size limit" description: "Determines if a summary is less than 100 chars" expression: "document.summary.size() < 100" Example (Equality): title: "Requestor is owner" description: "Determines if requestor is the document owner" expression: "document.owner == request.auth.claims.email" Example (Logic): title: "Public documents" description: "Determine whether the document should be publicly visible" expression: "document.type != 'private' && document.type != 'internal'" Example (Data Manipulation): title: "Notification string" description: "Create a notification string with a timestamp." expression: "'New message received at ' + string(document.create_time)" The exact variables and functions that may be referenced within an expression are determined by the service that evaluates it. See the service documentation for additional information.
            "description": "A String", # Optional. Description of the expression. This is a longer text which describes the expression, e.g. when hovered over it in a UI.
            "expression": "A String", # Textual representation of an expression in Common Expression Language syntax.
            "location": "A String", # Optional. String indicating the location of the expression for error reporting, e.g. a file name and a position in the file.
            "title": "A String", # Optional. Title for the expression, i.e. a short string describing its purpose. This can be used e.g. in UIs which allow to enter the expression.
          },
        ],
        "match": { # Represents a textual expression in the Common Expression Language (CEL) syntax. CEL is a C-like expression language. The syntax and semantics of CEL are documented at https://github.com/google/cel-spec. Example (Comparison): title: "Summary size limit" description: "Determines if a summary is less than 100 chars" expression: "document.summary.size() < 100" Example (Equality): title: "Requestor is owner" description: "Determines if requestor is the document owner" expression: "document.owner == request.auth.claims.email" Example (Logic): title: "Public documents" description: "Determine whether the document should be publicly visible" expression: "document.type != 'private' && document.type != 'internal'" Example (Data Manipulation): title: "Notification string" description: "Create a notification string with a timestamp." expression: "'New message received at ' + string(document.create_time)" The exact variables and functions that may be referenced within an expression are determined by the service that evaluates it. See the service documentation for additional information. # CEL expression evaluated against a route to determine if this term applies. When not set, the term applies to all routes.
          "description": "A String", # Optional. Description of the expression. This is a longer text which describes the expression, e.g. when hovered over it in a UI.
          "expression": "A String", # Textual representation of an expression in Common Expression Language syntax.
          "location": "A String", # Optional. String indicating the location of the expression for error reporting, e.g. a file name and a position in the file.
          "title": "A String", # Optional. Title for the expression, i.e. a short string describing its purpose. This can be used e.g. in UIs which allow to enter the expression.
        },
        "priority": 42, # The evaluation priority for this term, which must be between 0 (inclusive) and 2^31 (exclusive), and unique within the list.
      },
    ],
    "type": "A String",
  },
}

getRouterStatus(project, region, router, x__xgafv=None)

Retrieves runtime information of the specified router.

Args:
project: string, Project ID for this request. (required)
region: string, Name of the region for this request. (required)
router: string, Name of the Router resource to query. (required)
x__xgafv: string, V1 error format.
Allowed values
1 - v1 error format
2 - v2 error format

Returns:
An object of the form:

{
"kind": "compute#routerStatusResponse", # Type of resource.
"result": {
"bestRoutes": [ # A list of the best dynamic routes for this Cloud Router's Virtual Private Cloud (VPC) network in the same region as this Cloud Router. Lists all of the best routes per prefix that are programmed into this region's VPC data plane. When global dynamic routing mode is turned on in the VPC network, this list can include cross-region dynamic routes from Cloud Routers in other regions.
{ # Represents a Route resource. A route defines a path from VM instances in the VPC network to a specific destination. This destination can be inside or outside the VPC network. For more information, read the Routes overview.
"asPaths": [ # [Output Only] AS path.
{
"asLists": [ # [Output Only] The AS numbers of the AS Path.
42,
],
"pathSegmentType": "A String", # [Output Only] The type of the AS Path, which can be one of the following values: - 'AS_SET': unordered set of autonomous systems that the route in has traversed - 'AS_SEQUENCE': ordered set of autonomous systems that the route has traversed - 'AS_CONFED_SEQUENCE': ordered set of Member Autonomous Systems in the local confederation that the route has traversed - 'AS_CONFED_SET': unordered set of Member Autonomous Systems in the local confederation that the route has traversed
},
],
"creationTimestamp": "A String", # [Output Only] Creation timestamp in RFC3339 text format.
"description": "A String", # An optional description of this resource. Provide this field when you create the resource.
"destRange": "A String", # The destination range of outgoing packets that this route applies to. Both IPv4 and IPv6 are supported. Must specify an IPv4 range (e.g. 192.0.2.0/24) or an IPv6 range in RFC 4291 format (e.g. 2001:db8::/32). IPv6 range will be displayed using RFC 5952 compressed format.
"id": "A String", # [Output Only] The unique identifier for the resource. This identifier is defined by the server.
"kind": "compute#route", # [Output Only] Type of this resource. Always compute#routes for Route resources.
"name": "A String", # Name of the resource. Provided by the client when the resource is created. The name must be 1-63 characters long, and comply with RFC1035. Specifically, the name must be 1-63 characters long and match the regular expression `[a-z]([-a-z0-9]*[a-z0-9])?`. The first character must be a lowercase letter, and all following characters (except for the last character) must be a dash, lowercase letter, or digit. The last character must be a lowercase letter or digit.
"network": "A String", # Fully-qualified URL of the network that this route applies to.
"nextHopGateway": "A String", # The URL to a gateway that should handle matching packets. You can only specify the internet gateway using a full or partial valid URL: projects/ project/global/gateways/default-internet-gateway
"nextHopHub": "A String", # [Output Only] The full resource name of the Network Connectivity Center hub that will handle matching packets.
"nextHopIlb": "A String", # The URL to a forwarding rule of type loadBalancingScheme=INTERNAL that should handle matching packets or the IP address of the forwarding Rule. For example, the following are all valid URLs: - https://www.googleapis.com/compute/v1/projects/project/regions/region /forwardingRules/forwardingRule - regions/region/forwardingRules/forwardingRule If an IP address is provided, must specify an IPv4 address in dot-decimal notation or an IPv6 address in RFC 4291 format. For example, the following are all valid IP addresses: - 10.128.0.56 - 2001:db8::2d9:51:0:0 - 2001:db8:0:0:2d9:51:0:0 IPv6 addresses will be displayed using RFC 5952 compressed format (e.g. 2001:db8::2d9:51:0:0). Should never be an IPv4-mapped IPv6 address.
"nextHopInstance": "A String", # The URL to an instance that should handle matching packets. You can specify this as a full or partial URL. For example: https://www.googleapis.com/compute/v1/projects/project/zones/zone/instances/
"nextHopInterRegionCost": 42, # [Output only] Internal fixed region-to-region cost that Google Cloud calculates based on factors such as network performance, distance, and available bandwidth between regions.
"nextHopInterconnectAttachment": "A String", # [Output Only] The URL to an InterconnectAttachment which is the next hop for the route. This field will only be populated for the dynamic routes generated by Cloud Router with a linked interconnectAttachment.
"nextHopIp": "A String", # The network IP address of an instance that should handle matching packets. Both IPv6 address and IPv4 addresses are supported. Must specify an IPv4 address in dot-decimal notation (e.g. 192.0.2.99) or an IPv6 address in RFC 4291 format (e.g. 2001:db8::2d9:51:0:0 or 2001:db8:0:0:2d9:51:0:0). IPv6 addresses will be displayed using RFC 5952 compressed format (e.g. 2001:db8::2d9:51:0:0). Should never be an IPv4-mapped IPv6 address.
"nextHopMed": 42, # [Output Only] Multi-Exit Discriminator, a BGP route metric that indicates the desirability of a particular route in a network.
"nextHopNetwork": "A String", # The URL of the local network if it should handle matching packets.
"nextHopOrigin": "A String", # [Output Only] Indicates the origin of the route. Can be IGP (Interior Gateway Protocol), EGP (Exterior Gateway Protocol), or INCOMPLETE.
"nextHopPeering": "A String", # [Output Only] The network peering name that should handle matching packets, which should conform to RFC1035.
"nextHopVpnTunnel": "A String", # The URL to a VpnTunnel that should handle matching packets.
"priority": 42, # The priority of this route. Priority is used to break ties in cases where there is more than one matching route of equal prefix length. In cases where multiple routes have equal prefix length, the one with the lowest-numbered priority value wins. The default value is `1000`. The priority value must be from `0` to `65535`, inclusive.
"routeStatus": "A String", # [Output only] The status of the route.
"routeType": "A String", # [Output Only] The type of this route, which can be one of the following values: - 'TRANSIT' for a transit route that this router learned from another Cloud Router and will readvertise to one of its BGP peers - 'SUBNET' for a route from a subnet of the VPC - 'BGP' for a route learned from a BGP peer of this router - 'STATIC' for a static route
"selfLink": "A String", # [Output Only] Server-defined fully-qualified URL for this resource.
"tags": [ # A list of instance tags to which this route applies.
"A String",
],
"warnings": [ # [Output Only] If potential misconfigurations are detected for this route, this field will be populated with warning messages.
{
"code": "A String", # [Output Only] A warning code, if applicable. For example, Compute Engine returns NO_RESULTS_ON_PAGE if there are no results in the response.
"data": [ # [Output Only] Metadata about this warning in key: value format. For example: "data": [ { "key": "scope", "value": "zones/us-east1-d" }
{
"key": "A String", # [Output Only] A key that provides more detail on the warning being returned. For example, for warnings where there are no results in a list request for a particular zone, this key might be scope and the key value might be the zone name. Other examples might be a key indicating a deprecated resource and a suggested replacement, or a warning about invalid network settings (for example, if an instance attempts to perform IP forwarding but is not enabled for IP forwarding).
"value": "A String", # [Output Only] A warning data value corresponding to the key.
},
],
"message": "A String", # [Output Only] A human-readable description of the warning code.
},
],
},
],
"bestRoutesForRouter": [ # A list of the best BGP routes learned by this Cloud Router. It is possible that routes listed might not be programmed into the data plane, if the Google Cloud control plane finds a more optimal route for a prefix than a route learned by this Cloud Router.
{ # Represents a Route resource. A route defines a path from VM instances in the VPC network to a specific destination. This destination can be inside or outside the VPC network. For more information, read the Routes overview.
"asPaths": [ # [Output Only] AS path.
{
"asLists": [ # [Output Only] The AS numbers of the AS Path.
42,
],
"pathSegmentType": "A String", # [Output Only] The type of the AS Path, which can be one of the following values: - 'AS_SET': unordered set of autonomous systems that the route in has traversed - 'AS_SEQUENCE': ordered set of autonomous systems that the route has traversed - 'AS_CONFED_SEQUENCE': ordered set of Member Autonomous Systems in the local confederation that the route has traversed - 'AS_CONFED_SET': unordered set of Member Autonomous Systems in the local confederation that the route has traversed
},
],
"creationTimestamp": "A String", # [Output Only] Creation timestamp in RFC3339 text format.
"description": "A String", # An optional description of this resource. Provide this field when you create the resource.
"destRange": "A String", # The destination range of outgoing packets that this route applies to. Both IPv4 and IPv6 are supported. Must specify an IPv4 range (e.g. 192.0.2.0/24) or an IPv6 range in RFC 4291 format (e.g. 2001:db8::/32). IPv6 range will be displayed using RFC 5952 compressed format.
"id": "A String", # [Output Only] The unique identifier for the resource. This identifier is defined by the server.
"kind": "compute#route", # [Output Only] Type of this resource. Always compute#routes for Route resources.
"name": "A String", # Name of the resource. Provided by the client when the resource is created. The name must be 1-63 characters long, and comply with RFC1035. Specifically, the name must be 1-63 characters long and match the regular expression `[a-z]([-a-z0-9]*[a-z0-9])?`. The first character must be a lowercase letter, and all following characters (except for the last character) must be a dash, lowercase letter, or digit. The last character must be a lowercase letter or digit.
"network": "A String", # Fully-qualified URL of the network that this route applies to.
"nextHopGateway": "A String", # The URL to a gateway that should handle matching packets. You can only specify the internet gateway using a full or partial valid URL: projects/ project/global/gateways/default-internet-gateway
"nextHopHub": "A String", # [Output Only] The full resource name of the Network Connectivity Center hub that will handle matching packets.
"nextHopIlb": "A String", # The URL to a forwarding rule of type loadBalancingScheme=INTERNAL that should handle matching packets or the IP address of the forwarding Rule. For example, the following are all valid URLs: - https://www.googleapis.com/compute/v1/projects/project/regions/region /forwardingRules/forwardingRule - regions/region/forwardingRules/forwardingRule If an IP address is provided, must specify an IPv4 address in dot-decimal notation or an IPv6 address in RFC 4291 format. For example, the following are all valid IP addresses: - 10.128.0.56 - 2001:db8::2d9:51:0:0 - 2001:db8:0:0:2d9:51:0:0 IPv6 addresses will be displayed using RFC 5952 compressed format (e.g. 2001:db8::2d9:51:0:0). Should never be an IPv4-mapped IPv6 address.
"nextHopInstance": "A String", # The URL to an instance that should handle matching packets. You can specify this as a full or partial URL. For example: https://www.googleapis.com/compute/v1/projects/project/zones/zone/instances/
"nextHopInterRegionCost": 42, # [Output only] Internal fixed region-to-region cost that Google Cloud calculates based on factors such as network performance, distance, and available bandwidth between regions.
"nextHopInterconnectAttachment": "A String", # [Output Only] The URL to an InterconnectAttachment which is the next hop for the route. This field will only be populated for the dynamic routes generated by Cloud Router with a linked interconnectAttachment.
"nextHopIp": "A String", # The network IP address of an instance that should handle matching packets. Both IPv6 address and IPv4 addresses are supported. Must specify an IPv4 address in dot-decimal notation (e.g. 192.0.2.99) or an IPv6 address in RFC 4291 format (e.g. 2001:db8::2d9:51:0:0 or 2001:db8:0:0:2d9:51:0:0). IPv6 addresses will be displayed using RFC 5952 compressed format (e.g. 2001:db8::2d9:51:0:0). Should never be an IPv4-mapped IPv6 address.
"nextHopMed": 42, # [Output Only] Multi-Exit Discriminator, a BGP route metric that indicates the desirability of a particular route in a network.
"nextHopNetwork": "A String", # The URL of the local network if it should handle matching packets.
"nextHopOrigin": "A String", # [Output Only] Indicates the origin of the route. Can be IGP (Interior Gateway Protocol), EGP (Exterior Gateway Protocol), or INCOMPLETE.
"nextHopPeering": "A String", # [Output Only] The network peering name that should handle matching packets, which should conform to RFC1035.
"nextHopVpnTunnel": "A String", # The URL to a VpnTunnel that should handle matching packets.
"priority": 42, # The priority of this route. Priority is used to break ties in cases where there is more than one matching route of equal prefix length. In cases where multiple routes have equal prefix length, the one with the lowest-numbered priority value wins. The default value is `1000`. The priority value must be from `0` to `65535`, inclusive.
"routeStatus": "A String", # [Output only] The status of the route.
"routeType": "A String", # [Output Only] The type of this route, which can be one of the following values: - 'TRANSIT' for a transit route that this router learned from another Cloud Router and will readvertise to one of its BGP peers - 'SUBNET' for a route from a subnet of the VPC - 'BGP' for a route learned from a BGP peer of this router - 'STATIC' for a static route
"selfLink": "A String", # [Output Only] Server-defined fully-qualified URL for this resource.
"tags": [ # A list of instance tags to which this route applies.
"A String",
],
"warnings": [ # [Output Only] If potential misconfigurations are detected for this route, this field will be populated with warning messages.
{
"code": "A String", # [Output Only] A warning code, if applicable. For example, Compute Engine returns NO_RESULTS_ON_PAGE if there are no results in the response.
"data": [ # [Output Only] Metadata about this warning in key: value format. For example: "data": [ { "key": "scope", "value": "zones/us-east1-d" }
{
"key": "A String", # [Output Only] A key that provides more detail on the warning being returned. For example, for warnings where there are no results in a list request for a particular zone, this key might be scope and the key value might be the zone name. Other examples might be a key indicating a deprecated resource and a suggested replacement, or a warning about invalid network settings (for example, if an instance attempts to perform IP forwarding but is not enabled for IP forwarding).
"value": "A String", # [Output Only] A warning data value corresponding to the key.
},
],
"message": "A String", # [Output Only] A human-readable description of the warning code.
},
],
},
],
"bgpPeerStatus": [
{
"advertisedRoutes": [ # Routes that were advertised to the remote BGP peer
{ # Represents a Route resource. A route defines a path from VM instances in the VPC network to a specific destination. This destination can be inside or outside the VPC network. For more information, read the Routes overview.
"asPaths": [ # [Output Only] AS path.
{
"asLists": [ # [Output Only] The AS numbers of the AS Path.
42,
],
"pathSegmentType": "A String", # [Output Only] The type of the AS Path, which can be one of the following values: - 'AS_SET': unordered set of autonomous systems that the route in has traversed - 'AS_SEQUENCE': ordered set of autonomous systems that the route has traversed - 'AS_CONFED_SEQUENCE': ordered set of Member Autonomous Systems in the local confederation that the route has traversed - 'AS_CONFED_SET': unordered set of Member Autonomous Systems in the local confederation that the route has traversed
},
],
"creationTimestamp": "A String", # [Output Only] Creation timestamp in RFC3339 text format.
"description": "A String", # An optional description of this resource. Provide this field when you create the resource.
"destRange": "A String", # The destination range of outgoing packets that this route applies to. Both IPv4 and IPv6 are supported. Must specify an IPv4 range (e.g. 192.0.2.0/24) or an IPv6 range in RFC 4291 format (e.g. 2001:db8::/32). IPv6 range will be displayed using RFC 5952 compressed format.
"id": "A String", # [Output Only] The unique identifier for the resource. This identifier is defined by the server.
"kind": "compute#route", # [Output Only] Type of this resource. Always compute#routes for Route resources.
"name": "A String", # Name of the resource. Provided by the client when the resource is created. The name must be 1-63 characters long, and comply with RFC1035. Specifically, the name must be 1-63 characters long and match the regular expression `[a-z]([-a-z0-9]*[a-z0-9])?`. The first character must be a lowercase letter, and all following characters (except for the last character) must be a dash, lowercase letter, or digit. The last character must be a lowercase letter or digit.
"network": "A String", # Fully-qualified URL of the network that this route applies to.
"nextHopGateway": "A String", # The URL to a gateway that should handle matching packets. You can only specify the internet gateway using a full or partial valid URL: projects/ project/global/gateways/default-internet-gateway
"nextHopHub": "A String", # [Output Only] The full resource name of the Network Connectivity Center hub that will handle matching packets.
"nextHopIlb": "A String", # The URL to a forwarding rule of type loadBalancingScheme=INTERNAL that should handle matching packets or the IP address of the forwarding Rule. For example, the following are all valid URLs: - https://www.googleapis.com/compute/v1/projects/project/regions/region /forwardingRules/forwardingRule - regions/region/forwardingRules/forwardingRule If an IP address is provided, must specify an IPv4 address in dot-decimal notation or an IPv6 address in RFC 4291 format. For example, the following are all valid IP addresses: - 10.128.0.56 - 2001:db8::2d9:51:0:0 - 2001:db8:0:0:2d9:51:0:0 IPv6 addresses will be displayed using RFC 5952 compressed format (e.g. 2001:db8::2d9:51:0:0). Should never be an IPv4-mapped IPv6 address.
"nextHopInstance": "A String", # The URL to an instance that should handle matching packets. You can specify this as a full or partial URL. For example: https://www.googleapis.com/compute/v1/projects/project/zones/zone/instances/
"nextHopInterRegionCost": 42, # [Output only] Internal fixed region-to-region cost that Google Cloud calculates based on factors such as network performance, distance, and available bandwidth between regions.
"nextHopInterconnectAttachment": "A String", # [Output Only] The URL to an InterconnectAttachment which is the next hop for the route. This field will only be populated for the dynamic routes generated by Cloud Router with a linked interconnectAttachment.
"nextHopIp": "A String", # The network IP address of an instance that should handle matching packets. Both IPv6 address and IPv4 addresses are supported. Must specify an IPv4 address in dot-decimal notation (e.g. 192.0.2.99) or an IPv6 address in RFC 4291 format (e.g. 2001:db8::2d9:51:0:0 or 2001:db8:0:0:2d9:51:0:0). IPv6 addresses will be displayed using RFC 5952 compressed format (e.g. 2001:db8::2d9:51:0:0). Should never be an IPv4-mapped IPv6 address.
"nextHopMed": 42, # [Output Only] Multi-Exit Discriminator, a BGP route metric that indicates the desirability of a particular route in a network.
"nextHopNetwork": "A String", # The URL of the local network if it should handle matching packets.
"nextHopOrigin": "A String", # [Output Only] Indicates the origin of the route. Can be IGP (Interior Gateway Protocol), EGP (Exterior Gateway Protocol), or INCOMPLETE.
"nextHopPeering": "A String", # [Output Only] The network peering name that should handle matching packets, which should conform to RFC1035.
"nextHopVpnTunnel": "A String", # The URL to a VpnTunnel that should handle matching packets.
"priority": 42, # The priority of this route. Priority is used to break ties in cases where there is more than one matching route of equal prefix length. In cases where multiple routes have equal prefix length, the one with the lowest-numbered priority value wins. The default value is `1000`. The priority value must be from `0` to `65535`, inclusive.
"routeStatus": "A String", # [Output only] The status of the route.
"routeType": "A String", # [Output Only] The type of this route, which can be one of the following values: - 'TRANSIT' for a transit route that this router learned from another Cloud Router and will readvertise to one of its BGP peers - 'SUBNET' for a route from a subnet of the VPC - 'BGP' for a route learned from a BGP peer of this router - 'STATIC' for a static route
"selfLink": "A String", # [Output Only] Server-defined fully-qualified URL for this resource.
"tags": [ # A list of instance tags to which this route applies.
"A String",
],
"warnings": [ # [Output Only] If potential misconfigurations are detected for this route, this field will be populated with warning messages.
{
"code": "A String", # [Output Only] A warning code, if applicable. For example, Compute Engine returns NO_RESULTS_ON_PAGE if there are no results in the response.
"data": [ # [Output Only] Metadata about this warning in key: value format. For example: "data": [ { "key": "scope", "value": "zones/us-east1-d" }
{
"key": "A String", # [Output Only] A key that provides more detail on the warning being returned. For example, for warnings where there are no results in a list request for a particular zone, this key might be scope and the key value might be the zone name. Other examples might be a key indicating a deprecated resource and a suggested replacement, or a warning about invalid network settings (for example, if an instance attempts to perform IP forwarding but is not enabled for IP forwarding).
"value": "A String", # [Output Only] A warning data value corresponding to the key.
},
],
"message": "A String", # [Output Only] A human-readable description of the warning code.
},
],
},
],
"bfdStatus": { # Next free: 15
"bfdSessionInitializationMode": "A String", # The BFD session initialization mode for this BGP peer. If set to ACTIVE, the Cloud Router will initiate the BFD session for this BGP peer. If set to PASSIVE, the Cloud Router will wait for the peer router to initiate the BFD session for this BGP peer. If set to DISABLED, BFD is disabled for this BGP peer.
"configUpdateTimestampMicros": "A String", # Unix timestamp of the most recent config update.
"controlPacketCounts": { # Control packet counts for the current BFD session.
"numRx": 42, # Number of packets received since the beginning of the current BFD session.
"numRxRejected": 42, # Number of packets received that were rejected because of errors since the beginning of the current BFD session.
"numRxSuccessful": 42, # Number of packets received that were successfully processed since the beginning of the current BFD session.
"numTx": 42, # Number of packets transmitted since the beginning of the current BFD session.
},
"controlPacketIntervals": [ # Inter-packet time interval statistics for control packets.
{ # Next free: 7
"avgMs": "A String", # Average observed inter-packet interval in milliseconds.
"duration": "A String", # From how long ago in the past these intervals were observed.
"maxMs": "A String", # Maximum observed inter-packet interval in milliseconds.
"minMs": "A String", # Minimum observed inter-packet interval in milliseconds.
"numIntervals": "A String", # Number of inter-packet intervals from which these statistics were derived.
"type": "A String", # The type of packets for which inter-packet intervals were computed.
},
],
"localDiagnostic": "A String", # The diagnostic code specifies the local system's reason for the last change in session state. This allows remote systems to determine the reason that the previous session failed, for example. These diagnostic codes are specified in section 4.1 of RFC5880
"localState": "A String", # The current BFD session state as seen by the transmitting system. These states are specified in section 4.1 of RFC5880
"negotiatedLocalControlTxIntervalMs": 42, # Negotiated transmit interval for control packets.
"rxPacket": { # The most recent Rx control packet for this BFD session.
"authenticationPresent": True or False, # The Authentication Present bit of the BFD packet. This is specified in section 4.1 of RFC5880
"controlPlaneIndependent": True or False, # The Control Plane Independent bit of the BFD packet. This is specified in section 4.1 of RFC5880
"demand": True or False, # The demand bit of the BFD packet. This is specified in section 4.1 of RFC5880
"diagnostic": "A String", # The diagnostic code specifies the local system's reason for the last change in session state. This allows remote systems to determine the reason that the previous session failed, for example. These diagnostic codes are specified in section 4.1 of RFC5880
"final": True or False, # The Final bit of the BFD packet. This is specified in section 4.1 of RFC5880
"length": 42, # The length of the BFD Control packet in bytes. This is specified in section 4.1 of RFC5880
"minEchoRxIntervalMs": 42, # The Required Min Echo RX Interval value in the BFD packet. This is specified in section 4.1 of RFC5880
"minRxIntervalMs": 42, # The Required Min RX Interval value in the BFD packet. This is specified in section 4.1 of RFC5880
"minTxIntervalMs": 42, # The Desired Min TX Interval value in the BFD packet. This is specified in section 4.1 of RFC5880
"multiplier": 42, # The detection time multiplier of the BFD packet. This is specified in section 4.1 of RFC5880
"multipoint": True or False, # The multipoint bit of the BFD packet. This is specified in section 4.1 of RFC5880
"myDiscriminator": 42, # The My Discriminator value in the BFD packet. This is specified in section 4.1 of RFC5880
"poll": True or False, # The Poll bit of the BFD packet. This is specified in section 4.1 of RFC5880
"state": "A String", # The current BFD session state as seen by the transmitting system. These states are specified in section 4.1 of RFC5880
"version": 42, # The version number of the BFD protocol, as specified in section 4.1 of RFC5880.
"yourDiscriminator": 42, # The Your Discriminator value in the BFD packet. This is specified in section 4.1 of RFC5880
},
"txPacket": { # The most recent Tx control packet for this BFD session.
"authenticationPresent": True or False, # The Authentication Present bit of the BFD packet. This is specified in section 4.1 of RFC5880
"controlPlaneIndependent": True or False, # The Control Plane Independent bit of the BFD packet. This is specified in section 4.1 of RFC5880
"demand": True or False, # The demand bit of the BFD packet. This is specified in section 4.1 of RFC5880
"diagnostic": "A String", # The diagnostic code specifies the local system's reason for the last change in session state. This allows remote systems to determine the reason that the previous session failed, for example. These diagnostic codes are specified in section 4.1 of RFC5880
"final": True or False, # The Final bit of the BFD packet. This is specified in section 4.1 of RFC5880
"length": 42, # The length of the BFD Control packet in bytes. This is specified in section 4.1 of RFC5880
"minEchoRxIntervalMs": 42, # The Required Min Echo RX Interval value in the BFD packet. This is specified in section 4.1 of RFC5880
"minRxIntervalMs": 42, # The Required Min RX Interval value in the BFD packet. This is specified in section 4.1 of RFC5880
"minTxIntervalMs": 42, # The Desired Min TX Interval value in the BFD packet. This is specified in section 4.1 of RFC5880
"multiplier": 42, # The detection time multiplier of the BFD packet. This is specified in section 4.1 of RFC5880
"multipoint": True or False, # The multipoint bit of the BFD packet. This is specified in section 4.1 of RFC5880
"myDiscriminator": 42, # The My Discriminator value in the BFD packet. This is specified in section 4.1 of RFC5880
"poll": True or False, # The Poll bit of the BFD packet. This is specified in section 4.1 of RFC5880
"state": "A String", # The current BFD session state as seen by the transmitting system. These states are specified in section 4.1 of RFC5880
"version": 42, # The version number of the BFD protocol, as specified in section 4.1 of RFC5880.
"yourDiscriminator": 42, # The Your Discriminator value in the BFD packet. This is specified in section 4.1 of RFC5880
},
"uptimeMs": "A String", # Session uptime in milliseconds. Value will be 0 if session is not up.
},
"enableIpv4": True or False, # Enable IPv4 traffic over BGP Peer. It is enabled by default if the peerIpAddress is version 4.
"enableIpv6": True or False, # Enable IPv6 traffic over BGP Peer. It is enabled by default if the peerIpAddress is version 6.
"ipAddress": "A String", # IP address of the local BGP interface.
"ipv4NexthopAddress": "A String", # IPv4 address of the local BGP interface.
"ipv6NexthopAddress": "A String", # IPv6 address of the local BGP interface.
"linkedVpnTunnel": "A String", # URL of the VPN tunnel that this BGP peer controls.
"md5AuthEnabled": True or False, # Informs whether MD5 authentication is enabled on this BGP peer.
"name": "A String", # Name of this BGP peer. Unique within the Routers resource.
"numLearnedRoutes": 42, # Number of routes learned from the remote BGP Peer.
"peerIpAddress": "A String", # IP address of the remote BGP interface.
"peerIpv4NexthopAddress": "A String", # IPv4 address of the remote BGP interface.
"peerIpv6NexthopAddress": "A String", # IPv6 address of the remote BGP interface.
"routerApplianceInstance": "A String", # [Output only] URI of the VM instance that is used as third-party router appliances such as Next Gen Firewalls, Virtual Routers, or Router Appliances. The VM instance is the peer side of the BGP session.
"state": "A String", # The state of the BGP session. For a list of possible values for this field, see BGP session states.
"status": "A String", # Status of the BGP peer: {UP, DOWN}
"statusReason": "A String", # Indicates why particular status was returned.
"uptime": "A String", # Time this session has been up. Format: 14 years, 51 weeks, 6 days, 23 hours, 59 minutes, 59 seconds
"uptimeSeconds": "A String", # Time this session has been up, in seconds. Format: 145
},
],
"natStatus": [
{ # Status of a NAT contained in this router.
"autoAllocatedNatIps": [ # A list of IPs auto-allocated for NAT. Example: ["1.1.1.1", "129.2.16.89"]
"A String",
],
"drainAutoAllocatedNatIps": [ # A list of IPs auto-allocated for NAT that are in drain mode. Example: ["1.1.1.1", "179.12.26.133"].
"A String",
],
"drainUserAllocatedNatIps": [ # A list of IPs user-allocated for NAT that are in drain mode. Example: ["1.1.1.1", "179.12.26.133"].
"A String",
],
"minExtraNatIpsNeeded": 42, # The number of extra IPs to allocate. This will be greater than 0 only if user-specified IPs are NOT enough to allow all configured VMs to use NAT. This value is meaningful only when auto-allocation of NAT IPs is *not* used.
"name": "A String", # Unique name of this NAT.
"numVmEndpointsWithNatMappings": 42, # Number of VM endpoints (i.e., Nics) that can use NAT.
"ruleStatus": [ # Status of rules in this NAT.
{ # Status of a NAT Rule contained in this NAT.
"activeNatIps": [ # A list of active IPs for NAT. Example: ["1.1.1.1", "179.12.26.133"].
"A String",
],
"drainNatIps": [ # A list of IPs for NAT that are in drain mode. Example: ["1.1.1.1", "179.12.26.133"].
"A String",
],
"minExtraIpsNeeded": 42, # The number of extra IPs to allocate. This will be greater than 0 only if the existing IPs in this NAT Rule are NOT enough to allow all configured VMs to use NAT.
"numVmEndpointsWithNatMappings": 42, # Number of VM endpoints (i.e., NICs) that have NAT Mappings from this NAT Rule.
"ruleNumber": 42, # Rule number of the rule.
},
],
"userAllocatedNatIpResources": [ # A list of fully qualified URLs of reserved IP address resources.
"A String",
],
"userAllocatedNatIps": [ # A list of IPs user-allocated for NAT. They will be raw IP strings like "179.12.26.133".
"A String",
],
},
],
"network": "A String", # URI of the network to which this router belongs.
},
}

insert(project, region, body=None, requestId=None, x__xgafv=None)

Creates a Router resource in the specified project and region using the data included in the request.

Args:
project: string, Project ID for this request. (required)
region: string, Name of the region for this request. (required)
body: object, The request body.
The object takes the form of:

{ # Represents a Cloud Router resource. For more information about Cloud Router, read the Cloud Router overview.
"bgp": { # BGP information specific to this router.
"advertiseMode": "A String", # User-specified flag to indicate which mode to use for advertisement. The options are DEFAULT or CUSTOM.
"advertisedGroups": [ # User-specified list of prefix groups to advertise in custom mode. This field can only be populated if advertise_mode is CUSTOM and is advertised to all peers of the router. These groups will be advertised in addition to any specified prefixes. Leave this field blank to advertise no custom groups.
"A String",
],
"advertisedIpRanges": [ # User-specified list of individual IP ranges to advertise in custom mode. This field can only be populated if advertise_mode is CUSTOM and is advertised to all peers of the router. These IP ranges will be advertised in addition to any specified groups. Leave this field blank to advertise no custom IP ranges.
{ # Description-tagged IP ranges for the router to advertise.
"description": "A String", # User-specified description for the IP range.
"range": "A String", # The IP range to advertise. The value must be a CIDR-formatted string.
},
],
"asn": 42, # Local BGP Autonomous System Number (ASN). Must be an RFC6996 private ASN, either 16-bit or 32-bit. The value will be fixed for this router resource. All VPN tunnels that link to this router will have the same local ASN.
"identifierRange": "A String", # Explicitly specifies a range of valid BGP Identifiers for this Router. It is provided as a link-local IPv4 range (from 169.254.0.0/16), of size at least /30, even if the BGP sessions are over IPv6. It must not overlap with any IPv4 BGP session ranges. Other vendors commonly call this "router ID".
"keepaliveInterval": 42, # The interval in seconds between BGP keepalive messages that are sent to the peer. Hold time is three times the interval at which keepalive messages are sent, and the hold time is the maximum number of seconds allowed to elapse between successive keepalive messages that BGP receives from a peer. BGP will use the smaller of either the local hold time value or the peer's hold time value as the hold time for the BGP connection between the two peers. If set, this value must be between 20 and 60. The default is 20.
},
"bgpPeers": [ # BGP information that must be configured into the routing stack to establish BGP peering. This information must specify the peer ASN and either the interface name, IP address, or peer IP address. Please refer to RFC4273.
{
"advertiseMode": "A String", # User-specified flag to indicate which mode to use for advertisement.
"advertisedGroups": [ # User-specified list of prefix groups to advertise in custom mode, which currently supports the following option: - ALL_SUBNETS: Advertises all of the router's own VPC subnets. This excludes any routes learned for subnets that use VPC Network Peering. Note that this field can only be populated if advertise_mode is CUSTOM and overrides the list defined for the router (in the "bgp" message). These groups are advertised in addition to any specified prefixes. Leave this field blank to advertise no custom groups.
"A String",
],
"advertisedIpRanges": [ # User-specified list of individual IP ranges to advertise in custom mode. This field can only be populated if advertise_mode is CUSTOM and overrides the list defined for the router (in the "bgp" message). These IP ranges are advertised in addition to any specified groups. Leave this field blank to advertise no custom IP ranges.
{ # Description-tagged IP ranges for the router to advertise.
"description": "A String", # User-specified description for the IP range.
"range": "A String", # The IP range to advertise. The value must be a CIDR-formatted string.
},
],
"advertisedRoutePriority": 42, # The priority of routes advertised to this BGP peer. Where there is more than one matching route of maximum length, the routes with the lowest priority value win.
"bfd": { # BFD configuration for the BGP peering.
"minReceiveInterval": 42, # The minimum interval, in milliseconds, between BFD control packets received from the peer router. The actual value is negotiated between the two routers and is equal to the greater of this value and the transmit interval of the other router. If set, this value must be between 1000 and 30000. The default is 1000.
"minTransmitInterval": 42, # The minimum interval, in milliseconds, between BFD control packets transmitted to the peer router. The actual value is negotiated between the two routers and is equal to the greater of this value and the corresponding receive interval of the other router. If set, this value must be between 1000 and 30000. The default is 1000.
"multiplier": 42, # The number of consecutive BFD packets that must be missed before BFD declares that a peer is unavailable. If set, the value must be a value between 5 and 16. The default is 5.
"sessionInitializationMode": "A String", # The BFD session initialization mode for this BGP peer. If set to ACTIVE, the Cloud Router will initiate the BFD session for this BGP peer. If set to PASSIVE, the Cloud Router will wait for the peer router to initiate the BFD session for this BGP peer. If set to DISABLED, BFD is disabled for this BGP peer. The default is DISABLED.
},
"customLearnedIpRanges": [ # A list of user-defined custom learned route IP address ranges for a BGP session.
{
"range": "A String", # The custom learned route IP address range. Must be a valid CIDR-formatted prefix. If an IP address is provided without a subnet mask, it is interpreted as, for IPv4, a `/32` singular IP address range, and, for IPv6, `/128`.
},
],
"customLearnedRoutePriority": 42, # The user-defined custom learned route priority for a BGP session. This value is applied to all custom learned route ranges for the session. You can choose a value from `0` to `65335`. If you don't provide a value, Google Cloud assigns a priority of `100` to the ranges.
"enable": "A String", # The status of the BGP peer connection. If set to FALSE, any active session with the peer is terminated and all associated routing information is removed. If set to TRUE, the peer connection can be established with routing information. The default is TRUE.
"enableIpv4": True or False, # Enable IPv4 traffic over BGP Peer. It is enabled by default if the peerIpAddress is version 4.
"enableIpv6": True or False, # Enable IPv6 traffic over BGP Peer. It is enabled by default if the peerIpAddress is version 6.
"exportPolicies": [ # List of export policies applied to this peer, in the order they must be evaluated. The name must correspond to an existing policy that has ROUTE_POLICY_TYPE_EXPORT type. Note that Route Policies are currently available in preview. Please use Beta API to use Route Policies.
"A String",
],
"importPolicies": [ # List of import policies applied to this peer, in the order they must be evaluated. The name must correspond to an existing policy that has ROUTE_POLICY_TYPE_IMPORT type. Note that Route Policies are currently available in preview. Please use Beta API to use Route Policies.
"A String",
],
"interfaceName": "A String", # Name of the interface the BGP peer is associated with.
"ipAddress": "A String", # IP address of the interface inside Google Cloud Platform.
"ipv4NexthopAddress": "A String", # IPv4 address of the interface inside Google Cloud Platform.
"ipv6NexthopAddress": "A String", # IPv6 address of the interface inside Google Cloud Platform.
"managementType": "A String", # [Output Only] The resource that configures and manages this BGP peer. - MANAGED_BY_USER is the default value and can be managed by you or other users - MANAGED_BY_ATTACHMENT is a BGP peer that is configured and managed by Cloud Interconnect, specifically by an InterconnectAttachment of type PARTNER. Google automatically creates, updates, and deletes this type of BGP peer when the PARTNER InterconnectAttachment is created, updated, or deleted.
"md5AuthenticationKeyName": "A String", # Present if MD5 authentication is enabled for the peering. Must be the name of one of the entries in the Router.md5_authentication_keys. The field must comply with RFC1035.
"name": "A String", # Name of this BGP peer. The name must be 1-63 characters long, and comply with RFC1035. Specifically, the name must be 1-63 characters long and match the regular expression `[a-z]([-a-z0-9]*[a-z0-9])?` which means the first character must be a lowercase letter, and all following characters must be a dash, lowercase letter, or digit, except the last character, which cannot be a dash.
"peerAsn": 42, # Peer BGP Autonomous System Number (ASN). Each BGP interface may use a different value.
"peerIpAddress": "A String", # IP address of the BGP interface outside Google Cloud Platform.
"peerIpv4NexthopAddress": "A String", # IPv4 address of the BGP interface outside Google Cloud Platform.
"peerIpv6NexthopAddress": "A String", # IPv6 address of the BGP interface outside Google Cloud Platform.
"routerApplianceInstance": "A String", # URI of the VM instance that is used as third-party router appliances such as Next Gen Firewalls, Virtual Routers, or Router Appliances. The VM instance must be located in zones contained in the same region as this Cloud Router. The VM instance is the peer side of the BGP session.
},
],
"creationTimestamp": "A String", # [Output Only] Creation timestamp in RFC3339 text format.
"description": "A String", # An optional description of this resource. Provide this property when you create the resource.
"encryptedInterconnectRouter": True or False, # Indicates if a router is dedicated for use with encrypted VLAN attachments (interconnectAttachments).
"id": "A String", # [Output Only] The unique identifier for the resource. This identifier is defined by the server.
"interfaces": [ # Router interfaces. To create a BGP peer that uses a router interface, the interface must have one of the following fields specified: - linkedVpnTunnel - linkedInterconnectAttachment - subnetwork You can create a router interface without any of these fields specified. However, you cannot create a BGP peer that uses that interface.
{
"ipRange": "A String", # IP address and range of the interface. - For Internet Protocol version 4 (IPv4), the IP range must be in the RFC3927 link-local IP address space. The value must be a CIDR-formatted string, for example, 169.254.0.1/30. Note: Do not truncate the IP address, as it represents the IP address of the interface. - For Internet Protocol version 6 (IPv6), the value must be a unique local address (ULA) range from fdff:1::/64 with a mask length of 126 or less. This value should be a CIDR-formatted string, for example, fc00:0:1:1::1/112. Within the router's VPC, this IPv6 prefix will be reserved exclusively for this connection and cannot be used for any other purpose.
"ipVersion": "A String", # IP version of this interface.
"linkedInterconnectAttachment": "A String", # URI of the linked Interconnect attachment. It must be in the same region as the router. Each interface can have one linked resource, which can be a VPN tunnel, an Interconnect attachment, or a subnetwork.
"linkedVpnTunnel": "A String", # URI of the linked VPN tunnel, which must be in the same region as the router. Each interface can have one linked resource, which can be a VPN tunnel, an Interconnect attachment, or a subnetwork.
"managementType": "A String", # [Output Only] The resource that configures and manages this interface. - MANAGED_BY_USER is the default value and can be managed directly by users. - MANAGED_BY_ATTACHMENT is an interface that is configured and managed by Cloud Interconnect, specifically, by an InterconnectAttachment of type PARTNER. Google automatically creates, updates, and deletes this type of interface when the PARTNER InterconnectAttachment is created, updated, or deleted.
"name": "A String", # Name of this interface entry. The name must be 1-63 characters long, and comply with RFC1035. Specifically, the name must be 1-63 characters long and match the regular expression `[a-z]([-a-z0-9]*[a-z0-9])?` which means the first character must be a lowercase letter, and all following characters must be a dash, lowercase letter, or digit, except the last character, which cannot be a dash.
"privateIpAddress": "A String", # The regional private internal IP address that is used to establish BGP sessions to a VM instance acting as a third-party Router Appliance, such as a Next Gen Firewall, a Virtual Router, or an SD-WAN VM.
"redundantInterface": "A String", # Name of the interface that will be redundant with the current interface you are creating. The redundantInterface must belong to the same Cloud Router as the interface here. To establish the BGP session to a Router Appliance VM, you must create two BGP peers. The two BGP peers must be attached to two separate interfaces that are redundant with each other. The redundant_interface must be 1-63 characters long, and comply with RFC1035. Specifically, the redundant_interface must be 1-63 characters long and match the regular expression `[a-z]([-a-z0-9]*[a-z0-9])?` which means the first character must be a lowercase letter, and all following characters must be a dash, lowercase letter, or digit, except the last character, which cannot be a dash.
"subnetwork": "A String", # The URI of the subnetwork resource that this interface belongs to, which must be in the same region as the Cloud Router. When you establish a BGP session to a VM instance using this interface, the VM instance must belong to the same subnetwork as the subnetwork specified here.
},
],
"kind": "compute#router", # [Output Only] Type of resource. Always compute#router for routers.
"md5AuthenticationKeys": [ # Keys used for MD5 authentication.
{
"key": "A String", # [Input only] Value of the key. For patch and update calls, it can be skipped to copy the value from the previous configuration. This is allowed if the key with the same name existed before the operation. Maximum length is 80 characters. Can only contain printable ASCII characters.
"name": "A String", # Name used to identify the key. Must be unique within a router. Must be referenced by exactly one bgpPeer. Must comply with RFC1035.
},
],
"name": "A String", # Name of the resource. Provided by the client when the resource is created. The name must be 1-63 characters long, and comply with RFC1035. Specifically, the name must be 1-63 characters long and match the regular expression `[a-z]([-a-z0-9]*[a-z0-9])?` which means the first character must be a lowercase letter, and all following characters must be a dash, lowercase letter, or digit, except the last character, which cannot be a dash.
"nats": [ # A list of NAT services created in this router.
{ # Represents a Nat resource. It enables the VMs within the specified subnetworks to access Internet without external IP addresses. It specifies a list of subnetworks (and the ranges within) that want to use NAT. Customers can also provide the external IPs that would be used for NAT. GCP would auto-allocate ephemeral IPs if no external IPs are provided.
"autoNetworkTier": "A String", # The network tier to use when automatically reserving NAT IP addresses. Must be one of: PREMIUM, STANDARD. If not specified, then the current project-level default tier is used.
"drainNatIps": [ # A list of URLs of the IP resources to be drained. These IPs must be valid static external IPs that have been assigned to the NAT. These IPs should be used for updating/patching a NAT only.
"A String",
],
"enableDynamicPortAllocation": True or False, # Enable Dynamic Port Allocation. If not specified, it is disabled by default. If set to true, - Dynamic Port Allocation will be enabled on this NAT config. - enableEndpointIndependentMapping cannot be set to true. - If minPorts is set, minPortsPerVm must be set to a power of two greater than or equal to 32. If minPortsPerVm is not set, a minimum of 32 ports will be allocated to a VM from this NAT config.
"enableEndpointIndependentMapping": True or False,
"endpointTypes": [ # List of NAT-ted endpoint types supported by the Nat Gateway. If the list is empty, then it will be equivalent to include ENDPOINT_TYPE_VM
"A String",
],
"icmpIdleTimeoutSec": 42, # Timeout (in seconds) for ICMP connections. Defaults to 30s if not set.
"logConfig": { # Configuration of logging on a NAT. # Configure logging on this NAT.
"enable": True or False, # Indicates whether or not to export logs. This is false by default.
"filter": "A String", # Specify the desired filtering of logs on this NAT. If unspecified, logs are exported for all connections handled by this NAT. This option can take one of the following values: - ERRORS_ONLY: Export logs only for connection failures. - TRANSLATIONS_ONLY: Export logs only for successful connections. - ALL: Export logs for all connections, successful and unsuccessful.
},
"maxPortsPerVm": 42, # Maximum number of ports allocated to a VM from this NAT config when Dynamic Port Allocation is enabled. If Dynamic Port Allocation is not enabled, this field has no effect. If Dynamic Port Allocation is enabled, and this field is set, it must be set to a power of two greater than minPortsPerVm, or 64 if minPortsPerVm is not set. If Dynamic Port Allocation is enabled and this field is not set, a maximum of 65536 ports will be allocated to a VM from this NAT config.
"minPortsPerVm": 42, # Minimum number of ports allocated to a VM from this NAT config. If not set, a default number of ports is allocated to a VM. This is rounded up to the nearest power of 2. For example, if the value of this field is 50, at least 64 ports are allocated to a VM.
"name": "A String", # Unique name of this Nat service. The name must be 1-63 characters long and comply with RFC1035.
"natIpAllocateOption": "A String", # Specify the NatIpAllocateOption, which can take one of the following values: - MANUAL_ONLY: Uses only Nat IP addresses provided by customers. When there are not enough specified Nat IPs, the Nat service fails for new VMs. - AUTO_ONLY: Nat IPs are allocated by Google Cloud Platform; customers can't specify any Nat IPs. When choosing AUTO_ONLY, then nat_ip should be empty.
"natIps": [ # A list of URLs of the IP resources used for this Nat service. These IP addresses must be valid static external IP addresses assigned to the project.
"A String",
],
"rules": [ # A list of rules associated with this NAT.
{
"action": { # The action to be enforced for traffic that matches this rule.
"sourceNatActiveIps": [ # A list of URLs of the IP resources used for this NAT rule. These IP addresses must be valid static external IP addresses assigned to the project. This field is used for public NAT.
"A String",
],
"sourceNatActiveRanges": [ # A list of URLs of the subnetworks used as source ranges for this NAT Rule. These subnetworks must have purpose set to PRIVATE_NAT. This field is used for private NAT.
"A String",
],
"sourceNatDrainIps": [ # A list of URLs of the IP resources to be drained. These IPs must be valid static external IPs that have been assigned to the NAT. These IPs should be used for updating/patching a NAT rule only. This field is used for public NAT.
"A String",
],
"sourceNatDrainRanges": [ # A list of URLs of subnetworks representing source ranges to be drained. This is only supported on patch/update, and these subnetworks must have previously been used as active ranges in this NAT Rule. This field is used for private NAT.
"A String",
],
},
"description": "A String", # An optional description of this rule.
"match": "A String", # CEL expression that specifies the match condition that egress traffic from a VM is evaluated against. If it evaluates to true, the corresponding `action` is enforced. The following examples are valid match expressions for public NAT: `inIpRange(destination.ip, '1.1.0.0/16') || inIpRange(destination.ip, '2.2.0.0/16')` `destination.ip == '1.1.0.1' || destination.ip == '8.8.8.8'` The following example is a valid match expression for private NAT: `nexthop.hub == '//networkconnectivity.googleapis.com/projects/my-project/locations/global/hubs/hub-1'`
"ruleNumber": 42, # An integer uniquely identifying a rule in the list. The rule number must be a positive value between 0 and 65000, and must be unique among rules within a NAT.
},
],
"sourceSubnetworkIpRangesToNat": "A String", # Specify the Nat option, which can take one of the following values: - ALL_SUBNETWORKS_ALL_IP_RANGES: All of the IP ranges in every Subnetwork are allowed to Nat. - ALL_SUBNETWORKS_ALL_PRIMARY_IP_RANGES: All of the primary IP ranges in every Subnetwork are allowed to Nat. - LIST_OF_SUBNETWORKS: A list of Subnetworks are allowed to Nat (specified in the field subnetwork below) The default is SUBNETWORK_IP_RANGE_TO_NAT_OPTION_UNSPECIFIED. Note that if this field contains ALL_SUBNETWORKS_ALL_IP_RANGES then there should not be any other Router.Nat section in any Router for this network in this region.
"subnetworks": [ # A list of Subnetwork resources whose traffic should be translated by NAT Gateway. It is used only when LIST_OF_SUBNETWORKS is selected for the SubnetworkIpRangeToNatOption above.
{ # Defines the IP ranges that want to use NAT for a subnetwork.
"name": "A String", # URL for the subnetwork resource that will use NAT.
"secondaryIpRangeNames": [ # A list of the secondary ranges of the Subnetwork that are allowed to use NAT. This can be populated only if "LIST_OF_SECONDARY_IP_RANGES" is one of the values in source_ip_ranges_to_nat.
"A String",
],
"sourceIpRangesToNat": [ # Specify the options for NAT ranges in the Subnetwork. All options of a single value are valid except NAT_IP_RANGE_OPTION_UNSPECIFIED. The only valid option with multiple values is: ["PRIMARY_IP_RANGE", "LIST_OF_SECONDARY_IP_RANGES"] Default: [ALL_IP_RANGES]
"A String",
],
},
],
"tcpEstablishedIdleTimeoutSec": 42, # Timeout (in seconds) for TCP established connections. Defaults to 1200s if not set.
"tcpTimeWaitTimeoutSec": 42, # Timeout (in seconds) for TCP connections that are in TIME_WAIT state. Defaults to 120s if not set.
"tcpTransitoryIdleTimeoutSec": 42, # Timeout (in seconds) for TCP transitory connections. Defaults to 30s if not set.
"type": "A String", # Indicates whether this NAT is used for public or private IP translation. If unspecified, it defaults to PUBLIC.
"udpIdleTimeoutSec": 42, # Timeout (in seconds) for UDP connections. Defaults to 30s if not set.
},
],
"network": "A String", # URI of the network to which this router belongs.
"region": "A String", # [Output Only] URI of the region where the router resides. You must specify this field as part of the HTTP request URL. It is not settable as a field in the request body.
"selfLink": "A String", # [Output Only] Server-defined URL for the resource.
}

requestId: string, An optional request ID to identify requests. Specify a unique request ID so that if you must retry your request, the server will know to ignore the request if it has already been completed. For example, consider a situation where you make an initial request and the request times out. If you make the request again with the same request ID, the server can check if original operation with the same request ID was received, and if so, will ignore the second request. This prevents clients from accidentally creating duplicate commitments. The request ID must be a valid UUID with the exception that zero UUID is not supported ( 00000000-0000-0000-0000-000000000000).
x__xgafv: string, V1 error format.
Allowed values
1 - v1 error format
2 - v2 error format

Returns:
An object of the form:

{ # Represents an Operation resource. Google Compute Engine has three Operation resources: * [Global](/compute/docs/reference/rest/beta/globalOperations) * [Regional](/compute/docs/reference/rest/beta/regionOperations) * [Zonal](/compute/docs/reference/rest/beta/zoneOperations) You can use an operation resource to manage asynchronous API requests. For more information, read Handling API responses. Operations can be global, regional or zonal. - For global operations, use the `globalOperations` resource. - For regional operations, use the `regionOperations` resource. - For zonal operations, use the `zoneOperations` resource. For more information, read Global, Regional, and Zonal Resources. Note that completed Operation resources have a limited retention period.
"clientOperationId": "A String", # [Output Only] The value of `requestId` if you provided it in the request. Not present otherwise.
"creationTimestamp": "A String", # [Deprecated] This field is deprecated.
"description": "A String", # [Output Only] A textual description of the operation, which is set when the operation is created.
"endTime": "A String", # [Output Only] The time that this operation was completed. This value is in RFC3339 text format.
"error": { # [Output Only] If errors are generated during processing of the operation, this field will be populated.
"errors": [ # [Output Only] The array of errors encountered while processing this operation.
{
"code": "A String", # [Output Only] The error type identifier for this error.
"errorDetails": [ # [Output Only] An optional list of messages that contain the error details. There is a set of defined message types to use for providing details.The syntax depends on the error code. For example, QuotaExceededInfo will have details when the error code is QUOTA_EXCEEDED.
{
"errorInfo": { # Describes the cause of the error with structured details. Example of an error when contacting the "pubsub.googleapis.com" API when it is not enabled: { "reason": "API_DISABLED" "domain": "googleapis.com" "metadata": { "resource": "projects/123", "service": "pubsub.googleapis.com" } } This response indicates that the pubsub.googleapis.com API is not enabled. Example of an error that is returned when attempting to create a Spanner instance in a region that is out of stock: { "reason": "STOCKOUT" "domain": "spanner.googleapis.com", "metadata": { "availableRegions": "us-central1,us-east2" } }
"domain": "A String", # The logical grouping to which the "reason" belongs. The error domain is typically the registered service name of the tool or product that generates the error. Example: "pubsub.googleapis.com". If the error is generated by some common infrastructure, the error domain must be a globally unique value that identifies the infrastructure. For Google API infrastructure, the error domain is "googleapis.com".
"metadatas": { # Additional structured details about this error. Keys must match /a-z+/ but should ideally be lowerCamelCase. Also they must be limited to 64 characters in length. When identifying the current value of an exceeded limit, the units should be contained in the key, not the value. For example, rather than {"instanceLimit": "100/request"}, should be returned as, {"instanceLimitPerRequest": "100"}, if the client exceeds the number of instances that can be created in a single (batch) request.
"a_key": "A String",
},
"reason": "A String", # The reason of the error. This is a constant value that identifies the proximate cause of the error. Error reasons are unique within a particular domain of errors. This should be at most 63 characters and match a regular expression of `A-Z+[A-Z0-9]`, which represents UPPER_SNAKE_CASE.
},
"help": { # Provides links to documentation or for performing an out of band action. For example, if a quota check failed with an error indicating the calling project hasn't enabled the accessed service, this can contain a URL pointing directly to the right place in the developer console to flip the bit.
"links": [ # URL(s) pointing to additional information on handling the current error.
{ # Describes a URL link.
"description": "A String", # Describes what the link offers.
"url": "A String", # The URL of the link.
},
],
},
"localizedMessage": { # Provides a localized error message that is safe to return to the user which can be attached to an RPC error.
"locale": "A String", # The locale used following the specification defined at https://www.rfc-editor.org/rfc/bcp/bcp47.txt. Examples are: "en-US", "fr-CH", "es-MX"
"message": "A String", # The localized error message in the above locale.
},
"quotaInfo": { # Additional details for quota exceeded error for resource quota.
"dimensions": { # The map holding related quota dimensions.
"a_key": "A String",
},
"futureLimit": 3.14, # Future quota limit being rolled out. The limit's unit depends on the quota type or metric.
"limit": 3.14, # Current effective quota limit. The limit's unit depends on the quota type or metric.
"limitName": "A String", # The name of the quota limit.
"metricName": "A String", # The Compute Engine quota metric name.
"rolloutStatus": "A String", # Rollout status of the future quota limit.
},
},
],
"location": "A String", # [Output Only] Indicates the field in the request that caused the error. This property is optional.
"message": "A String", # [Output Only] An optional, human-readable error message.
},
],
},
"httpErrorMessage": "A String", # [Output Only] If the operation fails, this field contains the HTTP error message that was returned, such as `NOT FOUND`.
"httpErrorStatusCode": 42, # [Output Only] If the operation fails, this field contains the HTTP error status code that was returned. For example, a `404` means the resource was not found.
"id": "A String", # [Output Only] The unique identifier for the operation. This identifier is defined by the server.
"insertTime": "A String", # [Output Only] The time that this operation was requested. This value is in RFC3339 text format.
"instancesBulkInsertOperationMetadata": {
"perLocationStatus": { # Status information per location (location name is key). Example key: zones/us-central1-a
"a_key": {
"createdVmCount": 42, # [Output Only] Count of VMs successfully created so far.
"deletedVmCount": 42, # [Output Only] Count of VMs that got deleted during rollback.
"failedToCreateVmCount": 42, # [Output Only] Count of VMs that started creating but encountered an error.
"status": "A String", # [Output Only] Creation status of BulkInsert operation - information if the flow is rolling forward or rolling back.
"targetVmCount": 42, # [Output Only] Count of VMs originally planned to be created.
},
},
},
"kind": "compute#operation", # [Output Only] Type of the resource. Always `compute#operation` for Operation resources.
"name": "A String", # [Output Only] Name of the operation.
"operationGroupId": "A String", # [Output Only] An ID that represents a group of operations, such as when a group of operations results from a `bulkInsert` API request.
"operationType": "A String", # [Output Only] The type of operation, such as `insert`, `update`, or `delete`, and so on.
"progress": 42, # [Output Only] An optional progress indicator that ranges from 0 to 100. There is no requirement that this be linear or support any granularity of operations. This should not be used to guess when the operation will be complete. This number should monotonically increase as the operation progresses.
"region": "A String", # [Output Only] The URL of the region where the operation resides. Only applicable when performing regional operations.
"selfLink": "A String", # [Output Only] Server-defined URL for the resource.
"setCommonInstanceMetadataOperationMetadata": { # [Output Only] If the operation is for projects.setCommonInstanceMetadata, this field will contain information on all underlying zonal actions and their state.
"clientOperationId": "A String", # [Output Only] The client operation id.
"perLocationOperations": { # [Output Only] Status information per location (location name is key). Example key: zones/us-central1-a
"a_key": {
"error": { # The `Status` type defines a logical error model that is suitable for different programming environments, including REST APIs and RPC APIs. It is used by [gRPC](https://github.com/grpc). Each `Status` message contains three pieces of data: error code, error message, and error details. You can find out more about this error model and how to work with it in the [API Design Guide](https://cloud.google.com/apis/design/errors). # [Output Only] If state is `ABANDONED` or `FAILED`, this field is populated.
"code": 42, # The status code, which should be an enum value of google.rpc.Code.
"details": [ # A list of messages that carry the error details. There is a common set of message types for APIs to use.
{
"a_key": "", # Properties of the object. Contains field @type with type URL.
},
],
"message": "A String", # A developer-facing error message, which should be in English. Any user-facing error message should be localized and sent in the google.rpc.Status.details field, or localized by the client.
},
"state": "A String", # [Output Only] Status of the action, which can be one of the following: `PROPAGATING`, `PROPAGATED`, `ABANDONED`, `FAILED`, or `DONE`.
},
},
},
"startTime": "A String", # [Output Only] The time that this operation was started by the server. This value is in RFC3339 text format.
"status": "A String", # [Output Only] The status of the operation, which can be one of the following: `PENDING`, `RUNNING`, or `DONE`.
"statusMessage": "A String", # [Output Only] An optional textual description of the current status of the operation.
"targetId": "A String", # [Output Only] The unique target ID, which identifies a specific incarnation of the target resource.
"targetLink": "A String", # [Output Only] The URL of the resource that the operation modifies. For operations related to creating a snapshot, this points to the disk that the snapshot was created from.
"user": "A String", # [Output Only] User who requested the operation, for example: `user@example.com` or `alice_smith_identifier (global/workforcePools/example-com-us-employees)`.
"warnings": [ # [Output Only] If warning messages are generated during processing of the operation, this field will be populated.
{
"code": "A String", # [Output Only] A warning code, if applicable. For example, Compute Engine returns NO_RESULTS_ON_PAGE if there are no results in the response.
"data": [ # [Output Only] Metadata about this warning in key: value format. For example: "data": [ { "key": "scope", "value": "zones/us-east1-d" }
{
"key": "A String", # [Output Only] A key that provides more detail on the warning being returned. For example, for warnings where there are no results in a list request for a particular zone, this key might be scope and the key value might be the zone name. Other examples might be a key indicating a deprecated resource and a suggested replacement, or a warning about invalid network settings (for example, if an instance attempts to perform IP forwarding but is not enabled for IP forwarding).
"value": "A String", # [Output Only] A warning data value corresponding to the key.
},
],
"message": "A String", # [Output Only] A human-readable description of the warning code.
},
],
"zone": "A String", # [Output Only] The URL of the zone where the operation resides. Only applicable when performing per-zone operations.
}

list(project, region, filter=None, maxResults=None, orderBy=None, pageToken=None, returnPartialSuccess=None, x__xgafv=None)

Retrieves a list of Router resources available to the specified project.

Args:
project: string, Project ID for this request. (required)
region: string, Name of the region for this request. (required)
filter: string, A filter expression that filters resources listed in the response. Most Compute resources support two types of filter expressions: expressions that support regular expressions and expressions that follow API improvement proposal AIP-160. These two types of filter expressions cannot be mixed in one request. If you want to use AIP-160, your expression must specify the field name, an operator, and the value that you want to use for filtering. The value must be a string, a number, or a boolean. The operator must be either `=`, `!=`, `>`, `<`, `<=`, `>=` or `:`. For example, if you are filtering Compute Engine instances, you can exclude instances named `example-instance` by specifying `name != example-instance`. The `:*` comparison can be used to test whether a key has been defined. For example, to find all objects with `owner` label use: ``` labels.owner:* ``` You can also filter nested fields. For example, you could specify `scheduling.automaticRestart = false` to include instances only if they are not scheduled for automatic restarts. You can use filtering on nested fields to filter based on resource labels. To filter on multiple expressions, provide each separate expression within parentheses. For example: ``` (scheduling.automaticRestart = true) (cpuPlatform = "Intel Skylake") ``` By default, each expression is an `AND` expression. However, you can include `AND` and `OR` expressions explicitly. For example: ``` (cpuPlatform = "Intel Skylake") OR (cpuPlatform = "Intel Broadwell") AND (scheduling.automaticRestart = true) ``` If you want to use a regular expression, use the `eq` (equal) or `ne` (not equal) operator against a single un-parenthesized expression with or without quotes or against multiple parenthesized expressions. Examples: `fieldname eq unquoted literal` `fieldname eq 'single quoted literal'` `fieldname eq "double quoted literal"` `(fieldname1 eq literal) (fieldname2 ne "literal")` The literal value is interpreted as a regular expression using Google RE2 library syntax. The literal value must match the entire field. For example, to filter for instances that do not end with name "instance", you would use `name ne .*instance`. You cannot combine constraints on multiple fields using regular expressions.
maxResults: integer, The maximum number of results per page that should be returned. If the number of available results is larger than `maxResults`, Compute Engine returns a `nextPageToken` that can be used to get the next page of results in subsequent list requests. Acceptable values are `0` to `500`, inclusive. (Default: `500`)
orderBy: string, Sorts list results by a certain order. By default, results are returned in alphanumerical order based on the resource name. You can also sort results in descending order based on the creation timestamp using `orderBy="creationTimestamp desc"`. This sorts results based on the `creationTimestamp` field in reverse chronological order (newest result first). Use this to sort resources like operations so that the newest operation is returned first. Currently, only sorting by `name` or `creationTimestamp desc` is supported.
pageToken: string, Specifies a page token to use. Set `pageToken` to the `nextPageToken` returned by a previous list request to get the next page of results.
returnPartialSuccess: boolean, Opt-in for partial success behavior which provides partial results in case of failure. The default value is false. For example, when partial success behavior is enabled, aggregatedList for a single zone scope either returns all resources in the zone or no resources, with an error code.
x__xgafv: string, V1 error format.
Allowed values
1 - v1 error format
2 - v2 error format

Returns:
An object of the form:

{ # Contains a list of Router resources.
"id": "A String", # [Output Only] Unique identifier for the resource; defined by the server.
"items": [ # A list of Router resources.
{ # Represents a Cloud Router resource. For more information about Cloud Router, read the Cloud Router overview.
"bgp": { # BGP information specific to this router.
"advertiseMode": "A String", # User-specified flag to indicate which mode to use for advertisement. The options are DEFAULT or CUSTOM.
"advertisedGroups": [ # User-specified list of prefix groups to advertise in custom mode. This field can only be populated if advertise_mode is CUSTOM and is advertised to all peers of the router. These groups will be advertised in addition to any specified prefixes. Leave this field blank to advertise no custom groups.
"A String",
],
"advertisedIpRanges": [ # User-specified list of individual IP ranges to advertise in custom mode. This field can only be populated if advertise_mode is CUSTOM and is advertised to all peers of the router. These IP ranges will be advertised in addition to any specified groups. Leave this field blank to advertise no custom IP ranges.
{ # Description-tagged IP ranges for the router to advertise.
"description": "A String", # User-specified description for the IP range.
"range": "A String", # The IP range to advertise. The value must be a CIDR-formatted string.
},
],
"asn": 42, # Local BGP Autonomous System Number (ASN). Must be an RFC6996 private ASN, either 16-bit or 32-bit. The value will be fixed for this router resource. All VPN tunnels that link to this router will have the same local ASN.
"identifierRange": "A String", # Explicitly specifies a range of valid BGP Identifiers for this Router. It is provided as a link-local IPv4 range (from 169.254.0.0/16), of size at least /30, even if the BGP sessions are over IPv6. It must not overlap with any IPv4 BGP session ranges. Other vendors commonly call this "router ID".
"keepaliveInterval": 42, # The interval in seconds between BGP keepalive messages that are sent to the peer. Hold time is three times the interval at which keepalive messages are sent, and the hold time is the maximum number of seconds allowed to elapse between successive keepalive messages that BGP receives from a peer. BGP will use the smaller of either the local hold time value or the peer's hold time value as the hold time for the BGP connection between the two peers. If set, this value must be between 20 and 60. The default is 20.
},
"bgpPeers": [ # BGP information that must be configured into the routing stack to establish BGP peering. This information must specify the peer ASN and either the interface name, IP address, or peer IP address. Please refer to RFC4273.
{
"advertiseMode": "A String", # User-specified flag to indicate which mode to use for advertisement.
"advertisedGroups": [ # User-specified list of prefix groups to advertise in custom mode, which currently supports the following option: - ALL_SUBNETS: Advertises all of the router's own VPC subnets. This excludes any routes learned for subnets that use VPC Network Peering. Note that this field can only be populated if advertise_mode is CUSTOM and overrides the list defined for the router (in the "bgp" message). These groups are advertised in addition to any specified prefixes. Leave this field blank to advertise no custom groups.
"A String",
],
"advertisedIpRanges": [ # User-specified list of individual IP ranges to advertise in custom mode. This field can only be populated if advertise_mode is CUSTOM and overrides the list defined for the router (in the "bgp" message). These IP ranges are advertised in addition to any specified groups. Leave this field blank to advertise no custom IP ranges.
{ # Description-tagged IP ranges for the router to advertise.
"description": "A String", # User-specified description for the IP range.
"range": "A String", # The IP range to advertise. The value must be a CIDR-formatted string.
},
],
"advertisedRoutePriority": 42, # The priority of routes advertised to this BGP peer. Where there is more than one matching route of maximum length, the routes with the lowest priority value win.
"bfd": { # BFD configuration for the BGP peering.
"minReceiveInterval": 42, # The minimum interval, in milliseconds, between BFD control packets received from the peer router. The actual value is negotiated between the two routers and is equal to the greater of this value and the transmit interval of the other router. If set, this value must be between 1000 and 30000. The default is 1000.
"minTransmitInterval": 42, # The minimum interval, in milliseconds, between BFD control packets transmitted to the peer router. The actual value is negotiated between the two routers and is equal to the greater of this value and the corresponding receive interval of the other router. If set, this value must be between 1000 and 30000. The default is 1000.
"multiplier": 42, # The number of consecutive BFD packets that must be missed before BFD declares that a peer is unavailable. If set, the value must be a value between 5 and 16. The default is 5.
"sessionInitializationMode": "A String", # The BFD session initialization mode for this BGP peer. If set to ACTIVE, the Cloud Router will initiate the BFD session for this BGP peer. If set to PASSIVE, the Cloud Router will wait for the peer router to initiate the BFD session for this BGP peer. If set to DISABLED, BFD is disabled for this BGP peer. The default is DISABLED.
},
"customLearnedIpRanges": [ # A list of user-defined custom learned route IP address ranges for a BGP session.
{
"range": "A String", # The custom learned route IP address range. Must be a valid CIDR-formatted prefix. If an IP address is provided without a subnet mask, it is interpreted as, for IPv4, a `/32` singular IP address range, and, for IPv6, `/128`.
},
],
"customLearnedRoutePriority": 42, # The user-defined custom learned route priority for a BGP session. This value is applied to all custom learned route ranges for the session. You can choose a value from `0` to `65335`. If you don't provide a value, Google Cloud assigns a priority of `100` to the ranges.
"enable": "A String", # The status of the BGP peer connection. If set to FALSE, any active session with the peer is terminated and all associated routing information is removed. If set to TRUE, the peer connection can be established with routing information. The default is TRUE.
"enableIpv4": True or False, # Enable IPv4 traffic over BGP Peer. It is enabled by default if the peerIpAddress is version 4.
"enableIpv6": True or False, # Enable IPv6 traffic over BGP Peer. It is enabled by default if the peerIpAddress is version 6.
"exportPolicies": [ # List of export policies applied to this peer, in the order they must be evaluated. The name must correspond to an existing policy that has ROUTE_POLICY_TYPE_EXPORT type. Note that Route Policies are currently available in preview. Please use Beta API to use Route Policies.
"A String",
],
"importPolicies": [ # List of import policies applied to this peer, in the order they must be evaluated. The name must correspond to an existing policy that has ROUTE_POLICY_TYPE_IMPORT type. Note that Route Policies are currently available in preview. Please use Beta API to use Route Policies.
"A String",
],
"interfaceName": "A String", # Name of the interface the BGP peer is associated with.
"ipAddress": "A String", # IP address of the interface inside Google Cloud Platform.
"ipv4NexthopAddress": "A String", # IPv4 address of the interface inside Google Cloud Platform.
"ipv6NexthopAddress": "A String", # IPv6 address of the interface inside Google Cloud Platform.
"managementType": "A String", # [Output Only] The resource that configures and manages this BGP peer. - MANAGED_BY_USER is the default value and can be managed by you or other users - MANAGED_BY_ATTACHMENT is a BGP peer that is configured and managed by Cloud Interconnect, specifically by an InterconnectAttachment of type PARTNER. Google automatically creates, updates, and deletes this type of BGP peer when the PARTNER InterconnectAttachment is created, updated, or deleted.
"md5AuthenticationKeyName": "A String", # Present if MD5 authentication is enabled for the peering. Must be the name of one of the entries in the Router.md5_authentication_keys. The field must comply with RFC1035.
"name": "A String", # Name of this BGP peer. The name must be 1-63 characters long, and comply with RFC1035. Specifically, the name must be 1-63 characters long and match the regular expression `[a-z]([-a-z0-9]*[a-z0-9])?` which means the first character must be a lowercase letter, and all following characters must be a dash, lowercase letter, or digit, except the last character, which cannot be a dash.
"peerAsn": 42, # Peer BGP Autonomous System Number (ASN). Each BGP interface may use a different value.
"peerIpAddress": "A String", # IP address of the BGP interface outside Google Cloud Platform.
"peerIpv4NexthopAddress": "A String", # IPv4 address of the BGP interface outside Google Cloud Platform.
"peerIpv6NexthopAddress": "A String", # IPv6 address of the BGP interface outside Google Cloud Platform.
"routerApplianceInstance": "A String", # URI of the VM instance that is used as third-party router appliances such as Next Gen Firewalls, Virtual Routers, or Router Appliances. The VM instance must be located in zones contained in the same region as this Cloud Router. The VM instance is the peer side of the BGP session.
},
],
"creationTimestamp": "A String", # [Output Only] Creation timestamp in RFC3339 text format.
"description": "A String", # An optional description of this resource. Provide this property when you create the resource.
"encryptedInterconnectRouter": True or False, # Indicates if a router is dedicated for use with encrypted VLAN attachments (interconnectAttachments).
"id": "A String", # [Output Only] The unique identifier for the resource. This identifier is defined by the server.
"interfaces": [ # Router interfaces. To create a BGP peer that uses a router interface, the interface must have one of the following fields specified: - linkedVpnTunnel - linkedInterconnectAttachment - subnetwork You can create a router interface without any of these fields specified. However, you cannot create a BGP peer that uses that interface.
{
"ipRange": "A String", # IP address and range of the interface. - For Internet Protocol version 4 (IPv4), the IP range must be in the RFC3927 link-local IP address space. The value must be a CIDR-formatted string, for example, 169.254.0.1/30. Note: Do not truncate the IP address, as it represents the IP address of the interface. - For Internet Protocol version 6 (IPv6), the value must be a unique local address (ULA) range from fdff:1::/64 with a mask length of 126 or less. This value should be a CIDR-formatted string, for example, fc00:0:1:1::1/112. Within the router's VPC, this IPv6 prefix will be reserved exclusively for this connection and cannot be used for any other purpose.
"ipVersion": "A String", # IP version of this interface.
"linkedInterconnectAttachment": "A String", # URI of the linked Interconnect attachment. It must be in the same region as the router. Each interface can have one linked resource, which can be a VPN tunnel, an Interconnect attachment, or a subnetwork.
"linkedVpnTunnel": "A String", # URI of the linked VPN tunnel, which must be in the same region as the router. Each interface can have one linked resource, which can be a VPN tunnel, an Interconnect attachment, or a subnetwork.
"managementType": "A String", # [Output Only] The resource that configures and manages this interface. - MANAGED_BY_USER is the default value and can be managed directly by users. - MANAGED_BY_ATTACHMENT is an interface that is configured and managed by Cloud Interconnect, specifically, by an InterconnectAttachment of type PARTNER. Google automatically creates, updates, and deletes this type of interface when the PARTNER InterconnectAttachment is created, updated, or deleted.
"name": "A String", # Name of this interface entry. The name must be 1-63 characters long, and comply with RFC1035. Specifically, the name must be 1-63 characters long and match the regular expression `[a-z]([-a-z0-9]*[a-z0-9])?` which means the first character must be a lowercase letter, and all following characters must be a dash, lowercase letter, or digit, except the last character, which cannot be a dash.
"privateIpAddress": "A String", # The regional private internal IP address that is used to establish BGP sessions to a VM instance acting as a third-party Router Appliance, such as a Next Gen Firewall, a Virtual Router, or an SD-WAN VM.
"redundantInterface": "A String", # Name of the interface that will be redundant with the current interface you are creating. The redundantInterface must belong to the same Cloud Router as the interface here. To establish the BGP session to a Router Appliance VM, you must create two BGP peers. The two BGP peers must be attached to two separate interfaces that are redundant with each other. The redundant_interface must be 1-63 characters long, and comply with RFC1035. Specifically, the redundant_interface must be 1-63 characters long and match the regular expression `[a-z]([-a-z0-9]*[a-z0-9])?` which means the first character must be a lowercase letter, and all following characters must be a dash, lowercase letter, or digit, except the last character, which cannot be a dash.
"subnetwork": "A String", # The URI of the subnetwork resource that this interface belongs to, which must be in the same region as the Cloud Router. When you establish a BGP session to a VM instance using this interface, the VM instance must belong to the same subnetwork as the subnetwork specified here.
},
],
"kind": "compute#router", # [Output Only] Type of resource. Always compute#router for routers.
"md5AuthenticationKeys": [ # Keys used for MD5 authentication.
{
"key": "A String", # [Input only] Value of the key. For patch and update calls, it can be skipped to copy the value from the previous configuration. This is allowed if the key with the same name existed before the operation. Maximum length is 80 characters. Can only contain printable ASCII characters.
"name": "A String", # Name used to identify the key. Must be unique within a router. Must be referenced by exactly one bgpPeer. Must comply with RFC1035.
},
],
"name": "A String", # Name of the resource. Provided by the client when the resource is created. The name must be 1-63 characters long, and comply with RFC1035. Specifically, the name must be 1-63 characters long and match the regular expression `[a-z]([-a-z0-9]*[a-z0-9])?` which means the first character must be a lowercase letter, and all following characters must be a dash, lowercase letter, or digit, except the last character, which cannot be a dash.
"nats": [ # A list of NAT services created in this router.
{ # Represents a Nat resource. It enables the VMs within the specified subnetworks to access Internet without external IP addresses. It specifies a list of subnetworks (and the ranges within) that want to use NAT. Customers can also provide the external IPs that would be used for NAT. GCP would auto-allocate ephemeral IPs if no external IPs are provided.
"autoNetworkTier": "A String", # The network tier to use when automatically reserving NAT IP addresses. Must be one of: PREMIUM, STANDARD. If not specified, then the current project-level default tier is used.
"drainNatIps": [ # A list of URLs of the IP resources to be drained. These IPs must be valid static external IPs that have been assigned to the NAT. These IPs should be used for updating/patching a NAT only.
"A String",
],
"enableDynamicPortAllocation": True or False, # Enable Dynamic Port Allocation. If not specified, it is disabled by default. If set to true, - Dynamic Port Allocation will be enabled on this NAT config. - enableEndpointIndependentMapping cannot be set to true. - If minPorts is set, minPortsPerVm must be set to a power of two greater than or equal to 32. If minPortsPerVm is not set, a minimum of 32 ports will be allocated to a VM from this NAT config.
"enableEndpointIndependentMapping": True or False,
"endpointTypes": [ # List of NAT-ted endpoint types supported by the Nat Gateway. If the list is empty, then it will be equivalent to include ENDPOINT_TYPE_VM
"A String",
],
"icmpIdleTimeoutSec": 42, # Timeout (in seconds) for ICMP connections. Defaults to 30s if not set.
"logConfig": { # Configuration of logging on a NAT. # Configure logging on this NAT.
"enable": True or False, # Indicates whether or not to export logs. This is false by default.
"filter": "A String", # Specify the desired filtering of logs on this NAT. If unspecified, logs are exported for all connections handled by this NAT. This option can take one of the following values: - ERRORS_ONLY: Export logs only for connection failures. - TRANSLATIONS_ONLY: Export logs only for successful connections. - ALL: Export logs for all connections, successful and unsuccessful.
},
"maxPortsPerVm": 42, # Maximum number of ports allocated to a VM from this NAT config when Dynamic Port Allocation is enabled. If Dynamic Port Allocation is not enabled, this field has no effect. If Dynamic Port Allocation is enabled, and this field is set, it must be set to a power of two greater than minPortsPerVm, or 64 if minPortsPerVm is not set. If Dynamic Port Allocation is enabled and this field is not set, a maximum of 65536 ports will be allocated to a VM from this NAT config.
"minPortsPerVm": 42, # Minimum number of ports allocated to a VM from this NAT config. If not set, a default number of ports is allocated to a VM. This is rounded up to the nearest power of 2. For example, if the value of this field is 50, at least 64 ports are allocated to a VM.
"name": "A String", # Unique name of this Nat service. The name must be 1-63 characters long and comply with RFC1035.
"natIpAllocateOption": "A String", # Specify the NatIpAllocateOption, which can take one of the following values: - MANUAL_ONLY: Uses only Nat IP addresses provided by customers. When there are not enough specified Nat IPs, the Nat service fails for new VMs. - AUTO_ONLY: Nat IPs are allocated by Google Cloud Platform; customers can't specify any Nat IPs. When choosing AUTO_ONLY, then nat_ip should be empty.
"natIps": [ # A list of URLs of the IP resources used for this Nat service. These IP addresses must be valid static external IP addresses assigned to the project.
"A String",
],
"rules": [ # A list of rules associated with this NAT.
{
"action": { # The action to be enforced for traffic that matches this rule.
"sourceNatActiveIps": [ # A list of URLs of the IP resources used for this NAT rule. These IP addresses must be valid static external IP addresses assigned to the project. This field is used for public NAT.
"A String",
],
"sourceNatActiveRanges": [ # A list of URLs of the subnetworks used as source ranges for this NAT Rule. These subnetworks must have purpose set to PRIVATE_NAT. This field is used for private NAT.
"A String",
],
"sourceNatDrainIps": [ # A list of URLs of the IP resources to be drained. These IPs must be valid static external IPs that have been assigned to the NAT. These IPs should be used for updating/patching a NAT rule only. This field is used for public NAT.
"A String",
],
"sourceNatDrainRanges": [ # A list of URLs of subnetworks representing source ranges to be drained. This is only supported on patch/update, and these subnetworks must have previously been used as active ranges in this NAT Rule. This field is used for private NAT.
"A String",
],
},
"description": "A String", # An optional description of this rule.
"match": "A String", # CEL expression that specifies the match condition that egress traffic from a VM is evaluated against. If it evaluates to true, the corresponding `action` is enforced. The following examples are valid match expressions for public NAT: `inIpRange(destination.ip, '1.1.0.0/16') || inIpRange(destination.ip, '2.2.0.0/16')` `destination.ip == '1.1.0.1' || destination.ip == '8.8.8.8'` The following example is a valid match expression for private NAT: `nexthop.hub == '//networkconnectivity.googleapis.com/projects/my-project/locations/global/hubs/hub-1'`
"ruleNumber": 42, # An integer uniquely identifying a rule in the list. The rule number must be a positive value between 0 and 65000, and must be unique among rules within a NAT.
},
],
"sourceSubnetworkIpRangesToNat": "A String", # Specify the Nat option, which can take one of the following values: - ALL_SUBNETWORKS_ALL_IP_RANGES: All of the IP ranges in every Subnetwork are allowed to Nat. - ALL_SUBNETWORKS_ALL_PRIMARY_IP_RANGES: All of the primary IP ranges in every Subnetwork are allowed to Nat. - LIST_OF_SUBNETWORKS: A list of Subnetworks are allowed to Nat (specified in the field subnetwork below) The default is SUBNETWORK_IP_RANGE_TO_NAT_OPTION_UNSPECIFIED. Note that if this field contains ALL_SUBNETWORKS_ALL_IP_RANGES then there should not be any other Router.Nat section in any Router for this network in this region.
"subnetworks": [ # A list of Subnetwork resources whose traffic should be translated by NAT Gateway. It is used only when LIST_OF_SUBNETWORKS is selected for the SubnetworkIpRangeToNatOption above.
{ # Defines the IP ranges that want to use NAT for a subnetwork.
"name": "A String", # URL for the subnetwork resource that will use NAT.
"secondaryIpRangeNames": [ # A list of the secondary ranges of the Subnetwork that are allowed to use NAT. This can be populated only if "LIST_OF_SECONDARY_IP_RANGES" is one of the values in source_ip_ranges_to_nat.
"A String",
],
"sourceIpRangesToNat": [ # Specify the options for NAT ranges in the Subnetwork. All options of a single value are valid except NAT_IP_RANGE_OPTION_UNSPECIFIED. The only valid option with multiple values is: ["PRIMARY_IP_RANGE", "LIST_OF_SECONDARY_IP_RANGES"] Default: [ALL_IP_RANGES]
"A String",
],
},
],
"tcpEstablishedIdleTimeoutSec": 42, # Timeout (in seconds) for TCP established connections. Defaults to 1200s if not set.
"tcpTimeWaitTimeoutSec": 42, # Timeout (in seconds) for TCP connections that are in TIME_WAIT state. Defaults to 120s if not set.
"tcpTransitoryIdleTimeoutSec": 42, # Timeout (in seconds) for TCP transitory connections. Defaults to 30s if not set.
"type": "A String", # Indicates whether this NAT is used for public or private IP translation. If unspecified, it defaults to PUBLIC.
"udpIdleTimeoutSec": 42, # Timeout (in seconds) for UDP connections. Defaults to 30s if not set.
},
],
"network": "A String", # URI of the network to which this router belongs.
"region": "A String", # [Output Only] URI of the region where the router resides. You must specify this field as part of the HTTP request URL. It is not settable as a field in the request body.
"selfLink": "A String", # [Output Only] Server-defined URL for the resource.
},
],
"kind": "compute#routerList", # [Output Only] Type of resource. Always compute#router for routers.
"nextPageToken": "A String", # [Output Only] This token allows you to get the next page of results for list requests. If the number of results is larger than maxResults, use the nextPageToken as a value for the query parameter pageToken in the next list request. Subsequent list requests will have their own nextPageToken to continue paging through the results.
"selfLink": "A String", # [Output Only] Server-defined URL for this resource.
"warning": { # [Output Only] Informational warning message.
"code": "A String", # [Output Only] A warning code, if applicable. For example, Compute Engine returns NO_RESULTS_ON_PAGE if there are no results in the response.
"data": [ # [Output Only] Metadata about this warning in key: value format. For example: "data": [ { "key": "scope", "value": "zones/us-east1-d" }
{
"key": "A String", # [Output Only] A key that provides more detail on the warning being returned. For example, for warnings where there are no results in a list request for a particular zone, this key might be scope and the key value might be the zone name. Other examples might be a key indicating a deprecated resource and a suggested replacement, or a warning about invalid network settings (for example, if an instance attempts to perform IP forwarding but is not enabled for IP forwarding).
"value": "A String", # [Output Only] A warning data value corresponding to the key.
},
],
"message": "A String", # [Output Only] A human-readable description of the warning code.
},
}

listBgpRoutes(project, region, router, addressFamily=None, destinationPrefix=None, filter=None, maxResults=None, orderBy=None, pageToken=None, peer=None, policyApplied=None, returnPartialSuccess=None, routeType=None, x__xgafv=None)

Retrieves a list of router bgp routes available to the specified project.

Args:
  project: string, Project ID for this request. (required)
  region: string, Name of the region for this request. (required)
  router: string, Name or id of the resource for this request. Name should conform to RFC1035. (required)
  addressFamily: string, (Required) limit results to this address family (either IPv4 or IPv6)
    Allowed values
      IPV4 - 
      IPV6 - 
      UNSPECIFIED_IP_VERSION - 
  destinationPrefix: string, Limit results to destinations that are subnets of this CIDR range
  filter: string, A filter expression that filters resources listed in the response. Most Compute resources support two types of filter expressions: expressions that support regular expressions and expressions that follow API improvement proposal AIP-160. These two types of filter expressions cannot be mixed in one request. If you want to use AIP-160, your expression must specify the field name, an operator, and the value that you want to use for filtering. The value must be a string, a number, or a boolean. The operator must be either `=`, `!=`, `>`, `<`, `<=`, `>=` or `:`. For example, if you are filtering Compute Engine instances, you can exclude instances named `example-instance` by specifying `name != example-instance`. The `:*` comparison can be used to test whether a key has been defined. For example, to find all objects with `owner` label use: ``` labels.owner:* ``` You can also filter nested fields. For example, you could specify `scheduling.automaticRestart = false` to include instances only if they are not scheduled for automatic restarts. You can use filtering on nested fields to filter based on resource labels. To filter on multiple expressions, provide each separate expression within parentheses. For example: ``` (scheduling.automaticRestart = true) (cpuPlatform = "Intel Skylake") ``` By default, each expression is an `AND` expression. However, you can include `AND` and `OR` expressions explicitly. For example: ``` (cpuPlatform = "Intel Skylake") OR (cpuPlatform = "Intel Broadwell") AND (scheduling.automaticRestart = true) ``` If you want to use a regular expression, use the `eq` (equal) or `ne` (not equal) operator against a single un-parenthesized expression with or without quotes or against multiple parenthesized expressions. Examples: `fieldname eq unquoted literal` `fieldname eq 'single quoted literal'` `fieldname eq "double quoted literal"` `(fieldname1 eq literal) (fieldname2 ne "literal")` The literal value is interpreted as a regular expression using Google RE2 library syntax. The literal value must match the entire field. For example, to filter for instances that do not end with name "instance", you would use `name ne .*instance`. You cannot combine constraints on multiple fields using regular expressions.
  maxResults: integer, The maximum number of results per page that should be returned. If the number of available results is larger than `maxResults`, Compute Engine returns a `nextPageToken` that can be used to get the next page of results in subsequent list requests. Acceptable values are `0` to `500`, inclusive. (Default: `500`)
  orderBy: string, Sorts list results by a certain order. By default, results are returned in alphanumerical order based on the resource name. You can also sort results in descending order based on the creation timestamp using `orderBy="creationTimestamp desc"`. This sorts results based on the `creationTimestamp` field in reverse chronological order (newest result first). Use this to sort resources like operations so that the newest operation is returned first. Currently, only sorting by `name` or `creationTimestamp desc` is supported.
  pageToken: string, Specifies a page token to use. Set `pageToken` to the `nextPageToken` returned by a previous list request to get the next page of results.
  peer: string, (Required) limit results to the BGP peer with the given name. Name should conform to RFC1035.
  policyApplied: boolean, When true, the method returns post-policy routes. Otherwise, it returns pre-policy routes.
  returnPartialSuccess: boolean, Opt-in for partial success behavior which provides partial results in case of failure. The default value is false. For example, when partial success behavior is enabled, aggregatedList for a single zone scope either returns all resources in the zone or no resources, with an error code.
  routeType: string, (Required) limit results to this type of route (either LEARNED or ADVERTISED)
    Allowed values
      ADVERTISED - 
      LEARNED - 
      UNSPECIFIED_ROUTE_TYPE - 
  x__xgafv: string, V1 error format.
    Allowed values
      1 - v1 error format
      2 - v2 error format

Returns:
  An object of the form:

    {
  "etag": "A String",
  "id": "A String", # [Output Only] The unique identifier for the resource. This identifier is defined by the server.
  "kind": "compute#routersListBgpRoutes", # [Output Only] Type of resource. Always compute#routersListBgpRoutes for lists of bgp routes.
  "nextPageToken": "A String", # [Output Only] This token allows you to get the next page of results for list requests. If the number of results is larger than maxResults, use the nextPageToken as a value for the query parameter pageToken in the next list request. Subsequent list requests will have their own nextPageToken to continue paging through the results.
  "result": [ # [Output Only] A list of bgp routes.
    {
      "asPaths": [ # [Output only] AS-PATH for the route
        {
          "asns": [ # [Output only] ASNs in the path segment. When type is SEQUENCE, these are ordered.
            42,
          ],
          "type": "A String", # [Output only] Type of AS-PATH segment (SEQUENCE or SET)
        },
      ],
      "communities": [ # [Output only] BGP communities in human-readable A:B format.
        "A String",
      ],
      "destination": { # Network Layer Reachability Information (NLRI) for a route. # [Output only] Destination IP range for the route, in human-readable CIDR format
        "pathId": 42, # If the BGP session supports multiple paths (RFC 7911), the path identifier for this route.
        "prefix": "A String", # Human readable CIDR notation for a prefix. E.g. 10.42.0.0/16.
      },
      "med": 42, # [Output only] BGP multi-exit discriminator
      "origin": "A String", # [Output only] BGP origin (EGP, IGP or INCOMPLETE)
    },
  ],
  "selfLink": "A String", # [Output Only] Server-defined URL for this resource.
  "unreachables": [ # [Output Only] Unreachable resources.
    "A String",
  ],
  "warning": { # [Output Only] Informational warning message.
    "code": "A String", # [Output Only] A warning code, if applicable. For example, Compute Engine returns NO_RESULTS_ON_PAGE if there are no results in the response.
    "data": [ # [Output Only] Metadata about this warning in key: value format. For example: "data": [ { "key": "scope", "value": "zones/us-east1-d" }
      {
        "key": "A String", # [Output Only] A key that provides more detail on the warning being returned. For example, for warnings where there are no results in a list request for a particular zone, this key might be scope and the key value might be the zone name. Other examples might be a key indicating a deprecated resource and a suggested replacement, or a warning about invalid network settings (for example, if an instance attempts to perform IP forwarding but is not enabled for IP forwarding).
        "value": "A String", # [Output Only] A warning data value corresponding to the key.
      },
    ],
    "message": "A String", # [Output Only] A human-readable description of the warning code.
  },
}

listBgpRoutes_next()

Retrieves the next page of results.

        Args:
          previous_request: The request for the previous page. (required)
          previous_response: The response from the request for the previous page. (required)

        Returns:
          A request object that you can call 'execute()' on to request the next
          page. Returns None if there are no more items in the collection.

listRoutePolicies(project, region, router, filter=None, maxResults=None, orderBy=None, pageToken=None, returnPartialSuccess=None, x__xgafv=None)

Retrieves a list of router route policy subresources available to the specified project.

Args:
project: string, Project ID for this request. (required)
region: string, Name of the region for this request. (required)
router: string, Name or id of the resource for this request. Name should conform to RFC1035. (required)
filter: string, A filter expression that filters resources listed in the response. Most Compute resources support two types of filter expressions: expressions that support regular expressions and expressions that follow API improvement proposal AIP-160. These two types of filter expressions cannot be mixed in one request. If you want to use AIP-160, your expression must specify the field name, an operator, and the value that you want to use for filtering. The value must be a string, a number, or a boolean. The operator must be either `=`, `!=`, `>`, `<`, `<=`, `>=` or `:`. For example, if you are filtering Compute Engine instances, you can exclude instances named `example-instance` by specifying `name != example-instance`. The `:*` comparison can be used to test whether a key has been defined. For example, to find all objects with `owner` label use: ``` labels.owner:* ``` You can also filter nested fields. For example, you could specify `scheduling.automaticRestart = false` to include instances only if they are not scheduled for automatic restarts. You can use filtering on nested fields to filter based on resource labels. To filter on multiple expressions, provide each separate expression within parentheses. For example: ``` (scheduling.automaticRestart = true) (cpuPlatform = "Intel Skylake") ``` By default, each expression is an `AND` expression. However, you can include `AND` and `OR` expressions explicitly. For example: ``` (cpuPlatform = "Intel Skylake") OR (cpuPlatform = "Intel Broadwell") AND (scheduling.automaticRestart = true) ``` If you want to use a regular expression, use the `eq` (equal) or `ne` (not equal) operator against a single un-parenthesized expression with or without quotes or against multiple parenthesized expressions. Examples: `fieldname eq unquoted literal` `fieldname eq 'single quoted literal'` `fieldname eq "double quoted literal"` `(fieldname1 eq literal) (fieldname2 ne "literal")` The literal value is interpreted as a regular expression using Google RE2 library syntax. The literal value must match the entire field. For example, to filter for instances that do not end with name "instance", you would use `name ne .*instance`. You cannot combine constraints on multiple fields using regular expressions.
maxResults: integer, The maximum number of results per page that should be returned. If the number of available results is larger than `maxResults`, Compute Engine returns a `nextPageToken` that can be used to get the next page of results in subsequent list requests. Acceptable values are `0` to `500`, inclusive. (Default: `500`)
orderBy: string, Sorts list results by a certain order. By default, results are returned in alphanumerical order based on the resource name. You can also sort results in descending order based on the creation timestamp using `orderBy="creationTimestamp desc"`. This sorts results based on the `creationTimestamp` field in reverse chronological order (newest result first). Use this to sort resources like operations so that the newest operation is returned first. Currently, only sorting by `name` or `creationTimestamp desc` is supported.
pageToken: string, Specifies a page token to use. Set `pageToken` to the `nextPageToken` returned by a previous list request to get the next page of results.
returnPartialSuccess: boolean, Opt-in for partial success behavior which provides partial results in case of failure. The default value is false. For example, when partial success behavior is enabled, aggregatedList for a single zone scope either returns all resources in the zone or no resources, with an error code.
x__xgafv: string, V1 error format.
Allowed values
1 - v1 error format
2 - v2 error format

Returns:
An object of the form:

{
"etag": "A String",
"id": "A String", # [Output Only] The unique identifier for the resource. This identifier is defined by the server.
"kind": "compute#routersListRoutePolicies", # [Output Only] Type of resource. Always compute#routersListRoutePolicies for lists of route policies.
"nextPageToken": "A String", # [Output Only] This token allows you to get the next page of results for list requests. If the number of results is larger than maxResults, use the nextPageToken as a value for the query parameter pageToken in the next list request. Subsequent list requests will have their own nextPageToken to continue paging through the results.
"result": [ # [Output Only] A list of route policies.
{
"description": "A String", # An optional description of route policy.
"fingerprint": "A String", # A fingerprint for the Route Policy being applied to this Router, which is essentially a hash of the Route Policy used for optimistic locking. The fingerprint is initially generated by Compute Engine and changes after every request to modify or update Route Policy. You must always provide an up-to-date fingerprint hash in order to update or change labels. To see the latest fingerprint, make a getRoutePolicy() request to retrieve a Route Policy.
"name": "A String", # Route Policy name, which must be a resource ID segment and unique within all the router's Route Policies. Name should conform to RFC1035.
"terms": [ # List of terms (the order in the list is not important, they are evaluated in order of priority). Order of policies is not retained and might change when getting policy later.
{
"actions": [ # CEL expressions to evaluate to modify a route when this term matches.
{ # Represents a textual expression in the Common Expression Language (CEL) syntax. CEL is a C-like expression language. The syntax and semantics of CEL are documented at https://github.com/google/cel-spec. Example (Comparison): title: "Summary size limit" description: "Determines if a summary is less than 100 chars" expression: "document.summary.size() < 100" Example (Equality): title: "Requestor is owner" description: "Determines if requestor is the document owner" expression: "document.owner == request.auth.claims.email" Example (Logic): title: "Public documents" description: "Determine whether the document should be publicly visible" expression: "document.type != 'private' && document.type != 'internal'" Example (Data Manipulation): title: "Notification string" description: "Create a notification string with a timestamp." expression: "'New message received at ' + string(document.create_time)" The exact variables and functions that may be referenced within an expression are determined by the service that evaluates it. See the service documentation for additional information.
"description": "A String", # Optional. Description of the expression. This is a longer text which describes the expression, e.g. when hovered over it in a UI.
"expression": "A String", # Textual representation of an expression in Common Expression Language syntax.
"location": "A String", # Optional. String indicating the location of the expression for error reporting, e.g. a file name and a position in the file.
"title": "A String", # Optional. Title for the expression, i.e. a short string describing its purpose. This can be used e.g. in UIs which allow to enter the expression.
},
],
"match": { # Represents a textual expression in the Common Expression Language (CEL) syntax. CEL is a C-like expression language. The syntax and semantics of CEL are documented at https://github.com/google/cel-spec. Example (Comparison): title: "Summary size limit" description: "Determines if a summary is less than 100 chars" expression: "document.summary.size() < 100" Example (Equality): title: "Requestor is owner" description: "Determines if requestor is the document owner" expression: "document.owner == request.auth.claims.email" Example (Logic): title: "Public documents" description: "Determine whether the document should be publicly visible" expression: "document.type != 'private' && document.type != 'internal'" Example (Data Manipulation): title: "Notification string" description: "Create a notification string with a timestamp." expression: "'New message received at ' + string(document.create_time)" The exact variables and functions that may be referenced within an expression are determined by the service that evaluates it. See the service documentation for additional information. # CEL expression evaluated against a route to determine if this term applies. When not set, the term applies to all routes.
"description": "A String", # Optional. Description of the expression. This is a longer text which describes the expression, e.g. when hovered over it in a UI.
"expression": "A String", # Textual representation of an expression in Common Expression Language syntax.
"location": "A String", # Optional. String indicating the location of the expression for error reporting, e.g. a file name and a position in the file.
"title": "A String", # Optional. Title for the expression, i.e. a short string describing its purpose. This can be used e.g. in UIs which allow to enter the expression.
},
"priority": 42, # The evaluation priority for this term, which must be between 0 (inclusive) and 2^31 (exclusive), and unique within the list.
},
],
"type": "A String",
},
],
"selfLink": "A String", # [Output Only] Server-defined URL for this resource.
"unreachables": [ # [Output Only] Unreachable resources.
"A String",
],
"warning": { # [Output Only] Informational warning message.
"code": "A String", # [Output Only] A warning code, if applicable. For example, Compute Engine returns NO_RESULTS_ON_PAGE if there are no results in the response.
"data": [ # [Output Only] Metadata about this warning in key: value format. For example: "data": [ { "key": "scope", "value": "zones/us-east1-d" }
{
"key": "A String", # [Output Only] A key that provides more detail on the warning being returned. For example, for warnings where there are no results in a list request for a particular zone, this key might be scope and the key value might be the zone name. Other examples might be a key indicating a deprecated resource and a suggested replacement, or a warning about invalid network settings (for example, if an instance attempts to perform IP forwarding but is not enabled for IP forwarding).
"value": "A String", # [Output Only] A warning data value corresponding to the key.
},
],
"message": "A String", # [Output Only] A human-readable description of the warning code.
},
}

listRoutePolicies_next()

Retrieves the next page of results.

        Args:
          previous_request: The request for the previous page. (required)
          previous_response: The response from the request for the previous page. (required)

        Returns:
          A request object that you can call 'execute()' on to request the next
          page. Returns None if there are no more items in the collection.

list_next()

Retrieves the next page of results.

        Args:
          previous_request: The request for the previous page. (required)
          previous_response: The response from the request for the previous page. (required)

        Returns:
          A request object that you can call 'execute()' on to request the next
          page. Returns None if there are no more items in the collection.

patch(project, region, router, body=None, requestId=None, x__xgafv=None)

Patches the specified Router resource with the data included in the request. This method supports PATCH semantics and uses JSON merge patch format and processing rules.

Args:
project: string, Project ID for this request. (required)
region: string, Name of the region for this request. (required)
router: string, Name of the Router resource to patch. (required)
body: object, The request body.
The object takes the form of:

{ # Represents a Cloud Router resource. For more information about Cloud Router, read the Cloud Router overview.
"bgp": { # BGP information specific to this router.
"advertiseMode": "A String", # User-specified flag to indicate which mode to use for advertisement. The options are DEFAULT or CUSTOM.
"advertisedGroups": [ # User-specified list of prefix groups to advertise in custom mode. This field can only be populated if advertise_mode is CUSTOM and is advertised to all peers of the router. These groups will be advertised in addition to any specified prefixes. Leave this field blank to advertise no custom groups.
"A String",
],
"advertisedIpRanges": [ # User-specified list of individual IP ranges to advertise in custom mode. This field can only be populated if advertise_mode is CUSTOM and is advertised to all peers of the router. These IP ranges will be advertised in addition to any specified groups. Leave this field blank to advertise no custom IP ranges.
{ # Description-tagged IP ranges for the router to advertise.
"description": "A String", # User-specified description for the IP range.
"range": "A String", # The IP range to advertise. The value must be a CIDR-formatted string.
},
],
"asn": 42, # Local BGP Autonomous System Number (ASN). Must be an RFC6996 private ASN, either 16-bit or 32-bit. The value will be fixed for this router resource. All VPN tunnels that link to this router will have the same local ASN.
"identifierRange": "A String", # Explicitly specifies a range of valid BGP Identifiers for this Router. It is provided as a link-local IPv4 range (from 169.254.0.0/16), of size at least /30, even if the BGP sessions are over IPv6. It must not overlap with any IPv4 BGP session ranges. Other vendors commonly call this "router ID".
"keepaliveInterval": 42, # The interval in seconds between BGP keepalive messages that are sent to the peer. Hold time is three times the interval at which keepalive messages are sent, and the hold time is the maximum number of seconds allowed to elapse between successive keepalive messages that BGP receives from a peer. BGP will use the smaller of either the local hold time value or the peer's hold time value as the hold time for the BGP connection between the two peers. If set, this value must be between 20 and 60. The default is 20.
},
"bgpPeers": [ # BGP information that must be configured into the routing stack to establish BGP peering. This information must specify the peer ASN and either the interface name, IP address, or peer IP address. Please refer to RFC4273.
{
"advertiseMode": "A String", # User-specified flag to indicate which mode to use for advertisement.
"advertisedGroups": [ # User-specified list of prefix groups to advertise in custom mode, which currently supports the following option: - ALL_SUBNETS: Advertises all of the router's own VPC subnets. This excludes any routes learned for subnets that use VPC Network Peering. Note that this field can only be populated if advertise_mode is CUSTOM and overrides the list defined for the router (in the "bgp" message). These groups are advertised in addition to any specified prefixes. Leave this field blank to advertise no custom groups.
"A String",
],
"advertisedIpRanges": [ # User-specified list of individual IP ranges to advertise in custom mode. This field can only be populated if advertise_mode is CUSTOM and overrides the list defined for the router (in the "bgp" message). These IP ranges are advertised in addition to any specified groups. Leave this field blank to advertise no custom IP ranges.
{ # Description-tagged IP ranges for the router to advertise.
"description": "A String", # User-specified description for the IP range.
"range": "A String", # The IP range to advertise. The value must be a CIDR-formatted string.
},
],
"advertisedRoutePriority": 42, # The priority of routes advertised to this BGP peer. Where there is more than one matching route of maximum length, the routes with the lowest priority value win.
"bfd": { # BFD configuration for the BGP peering.
"minReceiveInterval": 42, # The minimum interval, in milliseconds, between BFD control packets received from the peer router. The actual value is negotiated between the two routers and is equal to the greater of this value and the transmit interval of the other router. If set, this value must be between 1000 and 30000. The default is 1000.
"minTransmitInterval": 42, # The minimum interval, in milliseconds, between BFD control packets transmitted to the peer router. The actual value is negotiated between the two routers and is equal to the greater of this value and the corresponding receive interval of the other router. If set, this value must be between 1000 and 30000. The default is 1000.
"multiplier": 42, # The number of consecutive BFD packets that must be missed before BFD declares that a peer is unavailable. If set, the value must be a value between 5 and 16. The default is 5.
"sessionInitializationMode": "A String", # The BFD session initialization mode for this BGP peer. If set to ACTIVE, the Cloud Router will initiate the BFD session for this BGP peer. If set to PASSIVE, the Cloud Router will wait for the peer router to initiate the BFD session for this BGP peer. If set to DISABLED, BFD is disabled for this BGP peer. The default is DISABLED.
},
"customLearnedIpRanges": [ # A list of user-defined custom learned route IP address ranges for a BGP session.
{
"range": "A String", # The custom learned route IP address range. Must be a valid CIDR-formatted prefix. If an IP address is provided without a subnet mask, it is interpreted as, for IPv4, a `/32` singular IP address range, and, for IPv6, `/128`.
},
],
"customLearnedRoutePriority": 42, # The user-defined custom learned route priority for a BGP session. This value is applied to all custom learned route ranges for the session. You can choose a value from `0` to `65335`. If you don't provide a value, Google Cloud assigns a priority of `100` to the ranges.
"enable": "A String", # The status of the BGP peer connection. If set to FALSE, any active session with the peer is terminated and all associated routing information is removed. If set to TRUE, the peer connection can be established with routing information. The default is TRUE.
"enableIpv4": True or False, # Enable IPv4 traffic over BGP Peer. It is enabled by default if the peerIpAddress is version 4.
"enableIpv6": True or False, # Enable IPv6 traffic over BGP Peer. It is enabled by default if the peerIpAddress is version 6.
"exportPolicies": [ # List of export policies applied to this peer, in the order they must be evaluated. The name must correspond to an existing policy that has ROUTE_POLICY_TYPE_EXPORT type. Note that Route Policies are currently available in preview. Please use Beta API to use Route Policies.
"A String",
],
"importPolicies": [ # List of import policies applied to this peer, in the order they must be evaluated. The name must correspond to an existing policy that has ROUTE_POLICY_TYPE_IMPORT type. Note that Route Policies are currently available in preview. Please use Beta API to use Route Policies.
"A String",
],
"interfaceName": "A String", # Name of the interface the BGP peer is associated with.
"ipAddress": "A String", # IP address of the interface inside Google Cloud Platform.
"ipv4NexthopAddress": "A String", # IPv4 address of the interface inside Google Cloud Platform.
"ipv6NexthopAddress": "A String", # IPv6 address of the interface inside Google Cloud Platform.
"managementType": "A String", # [Output Only] The resource that configures and manages this BGP peer. - MANAGED_BY_USER is the default value and can be managed by you or other users - MANAGED_BY_ATTACHMENT is a BGP peer that is configured and managed by Cloud Interconnect, specifically by an InterconnectAttachment of type PARTNER. Google automatically creates, updates, and deletes this type of BGP peer when the PARTNER InterconnectAttachment is created, updated, or deleted.
"md5AuthenticationKeyName": "A String", # Present if MD5 authentication is enabled for the peering. Must be the name of one of the entries in the Router.md5_authentication_keys. The field must comply with RFC1035.
"name": "A String", # Name of this BGP peer. The name must be 1-63 characters long, and comply with RFC1035. Specifically, the name must be 1-63 characters long and match the regular expression `[a-z]([-a-z0-9]*[a-z0-9])?` which means the first character must be a lowercase letter, and all following characters must be a dash, lowercase letter, or digit, except the last character, which cannot be a dash.
"peerAsn": 42, # Peer BGP Autonomous System Number (ASN). Each BGP interface may use a different value.
"peerIpAddress": "A String", # IP address of the BGP interface outside Google Cloud Platform.
"peerIpv4NexthopAddress": "A String", # IPv4 address of the BGP interface outside Google Cloud Platform.
"peerIpv6NexthopAddress": "A String", # IPv6 address of the BGP interface outside Google Cloud Platform.
"routerApplianceInstance": "A String", # URI of the VM instance that is used as third-party router appliances such as Next Gen Firewalls, Virtual Routers, or Router Appliances. The VM instance must be located in zones contained in the same region as this Cloud Router. The VM instance is the peer side of the BGP session.
},
],
"creationTimestamp": "A String", # [Output Only] Creation timestamp in RFC3339 text format.
"description": "A String", # An optional description of this resource. Provide this property when you create the resource.
"encryptedInterconnectRouter": True or False, # Indicates if a router is dedicated for use with encrypted VLAN attachments (interconnectAttachments).
"id": "A String", # [Output Only] The unique identifier for the resource. This identifier is defined by the server.
"interfaces": [ # Router interfaces. To create a BGP peer that uses a router interface, the interface must have one of the following fields specified: - linkedVpnTunnel - linkedInterconnectAttachment - subnetwork You can create a router interface without any of these fields specified. However, you cannot create a BGP peer that uses that interface.
{
"ipRange": "A String", # IP address and range of the interface. - For Internet Protocol version 4 (IPv4), the IP range must be in the RFC3927 link-local IP address space. The value must be a CIDR-formatted string, for example, 169.254.0.1/30. Note: Do not truncate the IP address, as it represents the IP address of the interface. - For Internet Protocol version 6 (IPv6), the value must be a unique local address (ULA) range from fdff:1::/64 with a mask length of 126 or less. This value should be a CIDR-formatted string, for example, fc00:0:1:1::1/112. Within the router's VPC, this IPv6 prefix will be reserved exclusively for this connection and cannot be used for any other purpose.
"ipVersion": "A String", # IP version of this interface.
"linkedInterconnectAttachment": "A String", # URI of the linked Interconnect attachment. It must be in the same region as the router. Each interface can have one linked resource, which can be a VPN tunnel, an Interconnect attachment, or a subnetwork.
"linkedVpnTunnel": "A String", # URI of the linked VPN tunnel, which must be in the same region as the router. Each interface can have one linked resource, which can be a VPN tunnel, an Interconnect attachment, or a subnetwork.
"managementType": "A String", # [Output Only] The resource that configures and manages this interface. - MANAGED_BY_USER is the default value and can be managed directly by users. - MANAGED_BY_ATTACHMENT is an interface that is configured and managed by Cloud Interconnect, specifically, by an InterconnectAttachment of type PARTNER. Google automatically creates, updates, and deletes this type of interface when the PARTNER InterconnectAttachment is created, updated, or deleted.
"name": "A String", # Name of this interface entry. The name must be 1-63 characters long, and comply with RFC1035. Specifically, the name must be 1-63 characters long and match the regular expression `[a-z]([-a-z0-9]*[a-z0-9])?` which means the first character must be a lowercase letter, and all following characters must be a dash, lowercase letter, or digit, except the last character, which cannot be a dash.
"privateIpAddress": "A String", # The regional private internal IP address that is used to establish BGP sessions to a VM instance acting as a third-party Router Appliance, such as a Next Gen Firewall, a Virtual Router, or an SD-WAN VM.
"redundantInterface": "A String", # Name of the interface that will be redundant with the current interface you are creating. The redundantInterface must belong to the same Cloud Router as the interface here. To establish the BGP session to a Router Appliance VM, you must create two BGP peers. The two BGP peers must be attached to two separate interfaces that are redundant with each other. The redundant_interface must be 1-63 characters long, and comply with RFC1035. Specifically, the redundant_interface must be 1-63 characters long and match the regular expression `[a-z]([-a-z0-9]*[a-z0-9])?` which means the first character must be a lowercase letter, and all following characters must be a dash, lowercase letter, or digit, except the last character, which cannot be a dash.
"subnetwork": "A String", # The URI of the subnetwork resource that this interface belongs to, which must be in the same region as the Cloud Router. When you establish a BGP session to a VM instance using this interface, the VM instance must belong to the same subnetwork as the subnetwork specified here.
},
],
"kind": "compute#router", # [Output Only] Type of resource. Always compute#router for routers.
"md5AuthenticationKeys": [ # Keys used for MD5 authentication.
{
"key": "A String", # [Input only] Value of the key. For patch and update calls, it can be skipped to copy the value from the previous configuration. This is allowed if the key with the same name existed before the operation. Maximum length is 80 characters. Can only contain printable ASCII characters.
"name": "A String", # Name used to identify the key. Must be unique within a router. Must be referenced by exactly one bgpPeer. Must comply with RFC1035.
},
],
"name": "A String", # Name of the resource. Provided by the client when the resource is created. The name must be 1-63 characters long, and comply with RFC1035. Specifically, the name must be 1-63 characters long and match the regular expression `[a-z]([-a-z0-9]*[a-z0-9])?` which means the first character must be a lowercase letter, and all following characters must be a dash, lowercase letter, or digit, except the last character, which cannot be a dash.
"nats": [ # A list of NAT services created in this router.
{ # Represents a Nat resource. It enables the VMs within the specified subnetworks to access Internet without external IP addresses. It specifies a list of subnetworks (and the ranges within) that want to use NAT. Customers can also provide the external IPs that would be used for NAT. GCP would auto-allocate ephemeral IPs if no external IPs are provided.
"autoNetworkTier": "A String", # The network tier to use when automatically reserving NAT IP addresses. Must be one of: PREMIUM, STANDARD. If not specified, then the current project-level default tier is used.
"drainNatIps": [ # A list of URLs of the IP resources to be drained. These IPs must be valid static external IPs that have been assigned to the NAT. These IPs should be used for updating/patching a NAT only.
"A String",
],
"enableDynamicPortAllocation": True or False, # Enable Dynamic Port Allocation. If not specified, it is disabled by default. If set to true, - Dynamic Port Allocation will be enabled on this NAT config. - enableEndpointIndependentMapping cannot be set to true. - If minPorts is set, minPortsPerVm must be set to a power of two greater than or equal to 32. If minPortsPerVm is not set, a minimum of 32 ports will be allocated to a VM from this NAT config.
"enableEndpointIndependentMapping": True or False,
"endpointTypes": [ # List of NAT-ted endpoint types supported by the Nat Gateway. If the list is empty, then it will be equivalent to include ENDPOINT_TYPE_VM
"A String",
],
"icmpIdleTimeoutSec": 42, # Timeout (in seconds) for ICMP connections. Defaults to 30s if not set.
"logConfig": { # Configuration of logging on a NAT. # Configure logging on this NAT.
"enable": True or False, # Indicates whether or not to export logs. This is false by default.
"filter": "A String", # Specify the desired filtering of logs on this NAT. If unspecified, logs are exported for all connections handled by this NAT. This option can take one of the following values: - ERRORS_ONLY: Export logs only for connection failures. - TRANSLATIONS_ONLY: Export logs only for successful connections. - ALL: Export logs for all connections, successful and unsuccessful.
},
"maxPortsPerVm": 42, # Maximum number of ports allocated to a VM from this NAT config when Dynamic Port Allocation is enabled. If Dynamic Port Allocation is not enabled, this field has no effect. If Dynamic Port Allocation is enabled, and this field is set, it must be set to a power of two greater than minPortsPerVm, or 64 if minPortsPerVm is not set. If Dynamic Port Allocation is enabled and this field is not set, a maximum of 65536 ports will be allocated to a VM from this NAT config.
"minPortsPerVm": 42, # Minimum number of ports allocated to a VM from this NAT config. If not set, a default number of ports is allocated to a VM. This is rounded up to the nearest power of 2. For example, if the value of this field is 50, at least 64 ports are allocated to a VM.
"name": "A String", # Unique name of this Nat service. The name must be 1-63 characters long and comply with RFC1035.
"natIpAllocateOption": "A String", # Specify the NatIpAllocateOption, which can take one of the following values: - MANUAL_ONLY: Uses only Nat IP addresses provided by customers. When there are not enough specified Nat IPs, the Nat service fails for new VMs. - AUTO_ONLY: Nat IPs are allocated by Google Cloud Platform; customers can't specify any Nat IPs. When choosing AUTO_ONLY, then nat_ip should be empty.
"natIps": [ # A list of URLs of the IP resources used for this Nat service. These IP addresses must be valid static external IP addresses assigned to the project.
"A String",
],
"rules": [ # A list of rules associated with this NAT.
{
"action": { # The action to be enforced for traffic that matches this rule.
"sourceNatActiveIps": [ # A list of URLs of the IP resources used for this NAT rule. These IP addresses must be valid static external IP addresses assigned to the project. This field is used for public NAT.
"A String",
],
"sourceNatActiveRanges": [ # A list of URLs of the subnetworks used as source ranges for this NAT Rule. These subnetworks must have purpose set to PRIVATE_NAT. This field is used for private NAT.
"A String",
],
"sourceNatDrainIps": [ # A list of URLs of the IP resources to be drained. These IPs must be valid static external IPs that have been assigned to the NAT. These IPs should be used for updating/patching a NAT rule only. This field is used for public NAT.
"A String",
],
"sourceNatDrainRanges": [ # A list of URLs of subnetworks representing source ranges to be drained. This is only supported on patch/update, and these subnetworks must have previously been used as active ranges in this NAT Rule. This field is used for private NAT.
"A String",
],
},
"description": "A String", # An optional description of this rule.
"match": "A String", # CEL expression that specifies the match condition that egress traffic from a VM is evaluated against. If it evaluates to true, the corresponding `action` is enforced. The following examples are valid match expressions for public NAT: `inIpRange(destination.ip, '1.1.0.0/16') || inIpRange(destination.ip, '2.2.0.0/16')` `destination.ip == '1.1.0.1' || destination.ip == '8.8.8.8'` The following example is a valid match expression for private NAT: `nexthop.hub == '//networkconnectivity.googleapis.com/projects/my-project/locations/global/hubs/hub-1'`
"ruleNumber": 42, # An integer uniquely identifying a rule in the list. The rule number must be a positive value between 0 and 65000, and must be unique among rules within a NAT.
},
],
"sourceSubnetworkIpRangesToNat": "A String", # Specify the Nat option, which can take one of the following values: - ALL_SUBNETWORKS_ALL_IP_RANGES: All of the IP ranges in every Subnetwork are allowed to Nat. - ALL_SUBNETWORKS_ALL_PRIMARY_IP_RANGES: All of the primary IP ranges in every Subnetwork are allowed to Nat. - LIST_OF_SUBNETWORKS: A list of Subnetworks are allowed to Nat (specified in the field subnetwork below) The default is SUBNETWORK_IP_RANGE_TO_NAT_OPTION_UNSPECIFIED. Note that if this field contains ALL_SUBNETWORKS_ALL_IP_RANGES then there should not be any other Router.Nat section in any Router for this network in this region.
"subnetworks": [ # A list of Subnetwork resources whose traffic should be translated by NAT Gateway. It is used only when LIST_OF_SUBNETWORKS is selected for the SubnetworkIpRangeToNatOption above.
{ # Defines the IP ranges that want to use NAT for a subnetwork.
"name": "A String", # URL for the subnetwork resource that will use NAT.
"secondaryIpRangeNames": [ # A list of the secondary ranges of the Subnetwork that are allowed to use NAT. This can be populated only if "LIST_OF_SECONDARY_IP_RANGES" is one of the values in source_ip_ranges_to_nat.
"A String",
],
"sourceIpRangesToNat": [ # Specify the options for NAT ranges in the Subnetwork. All options of a single value are valid except NAT_IP_RANGE_OPTION_UNSPECIFIED. The only valid option with multiple values is: ["PRIMARY_IP_RANGE", "LIST_OF_SECONDARY_IP_RANGES"] Default: [ALL_IP_RANGES]
"A String",
],
},
],
"tcpEstablishedIdleTimeoutSec": 42, # Timeout (in seconds) for TCP established connections. Defaults to 1200s if not set.
"tcpTimeWaitTimeoutSec": 42, # Timeout (in seconds) for TCP connections that are in TIME_WAIT state. Defaults to 120s if not set.
"tcpTransitoryIdleTimeoutSec": 42, # Timeout (in seconds) for TCP transitory connections. Defaults to 30s if not set.
"type": "A String", # Indicates whether this NAT is used for public or private IP translation. If unspecified, it defaults to PUBLIC.
"udpIdleTimeoutSec": 42, # Timeout (in seconds) for UDP connections. Defaults to 30s if not set.
},
],
"network": "A String", # URI of the network to which this router belongs.
"region": "A String", # [Output Only] URI of the region where the router resides. You must specify this field as part of the HTTP request URL. It is not settable as a field in the request body.
"selfLink": "A String", # [Output Only] Server-defined URL for the resource.
}

requestId: string, An optional request ID to identify requests. Specify a unique request ID so that if you must retry your request, the server will know to ignore the request if it has already been completed. For example, consider a situation where you make an initial request and the request times out. If you make the request again with the same request ID, the server can check if original operation with the same request ID was received, and if so, will ignore the second request. This prevents clients from accidentally creating duplicate commitments. The request ID must be a valid UUID with the exception that zero UUID is not supported ( 00000000-0000-0000-0000-000000000000).
x__xgafv: string, V1 error format.
Allowed values
1 - v1 error format
2 - v2 error format

Returns:
An object of the form:

{ # Represents an Operation resource. Google Compute Engine has three Operation resources: * [Global](/compute/docs/reference/rest/beta/globalOperations) * [Regional](/compute/docs/reference/rest/beta/regionOperations) * [Zonal](/compute/docs/reference/rest/beta/zoneOperations) You can use an operation resource to manage asynchronous API requests. For more information, read Handling API responses. Operations can be global, regional or zonal. - For global operations, use the `globalOperations` resource. - For regional operations, use the `regionOperations` resource. - For zonal operations, use the `zoneOperations` resource. For more information, read Global, Regional, and Zonal Resources. Note that completed Operation resources have a limited retention period.
"clientOperationId": "A String", # [Output Only] The value of `requestId` if you provided it in the request. Not present otherwise.
"creationTimestamp": "A String", # [Deprecated] This field is deprecated.
"description": "A String", # [Output Only] A textual description of the operation, which is set when the operation is created.
"endTime": "A String", # [Output Only] The time that this operation was completed. This value is in RFC3339 text format.
"error": { # [Output Only] If errors are generated during processing of the operation, this field will be populated.
"errors": [ # [Output Only] The array of errors encountered while processing this operation.
{
"code": "A String", # [Output Only] The error type identifier for this error.
"errorDetails": [ # [Output Only] An optional list of messages that contain the error details. There is a set of defined message types to use for providing details.The syntax depends on the error code. For example, QuotaExceededInfo will have details when the error code is QUOTA_EXCEEDED.
{
"errorInfo": { # Describes the cause of the error with structured details. Example of an error when contacting the "pubsub.googleapis.com" API when it is not enabled: { "reason": "API_DISABLED" "domain": "googleapis.com" "metadata": { "resource": "projects/123", "service": "pubsub.googleapis.com" } } This response indicates that the pubsub.googleapis.com API is not enabled. Example of an error that is returned when attempting to create a Spanner instance in a region that is out of stock: { "reason": "STOCKOUT" "domain": "spanner.googleapis.com", "metadata": { "availableRegions": "us-central1,us-east2" } }
"domain": "A String", # The logical grouping to which the "reason" belongs. The error domain is typically the registered service name of the tool or product that generates the error. Example: "pubsub.googleapis.com". If the error is generated by some common infrastructure, the error domain must be a globally unique value that identifies the infrastructure. For Google API infrastructure, the error domain is "googleapis.com".
"metadatas": { # Additional structured details about this error. Keys must match /a-z+/ but should ideally be lowerCamelCase. Also they must be limited to 64 characters in length. When identifying the current value of an exceeded limit, the units should be contained in the key, not the value. For example, rather than {"instanceLimit": "100/request"}, should be returned as, {"instanceLimitPerRequest": "100"}, if the client exceeds the number of instances that can be created in a single (batch) request.
"a_key": "A String",
},
"reason": "A String", # The reason of the error. This is a constant value that identifies the proximate cause of the error. Error reasons are unique within a particular domain of errors. This should be at most 63 characters and match a regular expression of `A-Z+[A-Z0-9]`, which represents UPPER_SNAKE_CASE.
},
"help": { # Provides links to documentation or for performing an out of band action. For example, if a quota check failed with an error indicating the calling project hasn't enabled the accessed service, this can contain a URL pointing directly to the right place in the developer console to flip the bit.
"links": [ # URL(s) pointing to additional information on handling the current error.
{ # Describes a URL link.
"description": "A String", # Describes what the link offers.
"url": "A String", # The URL of the link.
},
],
},
"localizedMessage": { # Provides a localized error message that is safe to return to the user which can be attached to an RPC error.
"locale": "A String", # The locale used following the specification defined at https://www.rfc-editor.org/rfc/bcp/bcp47.txt. Examples are: "en-US", "fr-CH", "es-MX"
"message": "A String", # The localized error message in the above locale.
},
"quotaInfo": { # Additional details for quota exceeded error for resource quota.
"dimensions": { # The map holding related quota dimensions.
"a_key": "A String",
},
"futureLimit": 3.14, # Future quota limit being rolled out. The limit's unit depends on the quota type or metric.
"limit": 3.14, # Current effective quota limit. The limit's unit depends on the quota type or metric.
"limitName": "A String", # The name of the quota limit.
"metricName": "A String", # The Compute Engine quota metric name.
"rolloutStatus": "A String", # Rollout status of the future quota limit.
},
},
],
"location": "A String", # [Output Only] Indicates the field in the request that caused the error. This property is optional.
"message": "A String", # [Output Only] An optional, human-readable error message.
},
],
},
"httpErrorMessage": "A String", # [Output Only] If the operation fails, this field contains the HTTP error message that was returned, such as `NOT FOUND`.
"httpErrorStatusCode": 42, # [Output Only] If the operation fails, this field contains the HTTP error status code that was returned. For example, a `404` means the resource was not found.
"id": "A String", # [Output Only] The unique identifier for the operation. This identifier is defined by the server.
"insertTime": "A String", # [Output Only] The time that this operation was requested. This value is in RFC3339 text format.
"instancesBulkInsertOperationMetadata": {
"perLocationStatus": { # Status information per location (location name is key). Example key: zones/us-central1-a
"a_key": {
"createdVmCount": 42, # [Output Only] Count of VMs successfully created so far.
"deletedVmCount": 42, # [Output Only] Count of VMs that got deleted during rollback.
"failedToCreateVmCount": 42, # [Output Only] Count of VMs that started creating but encountered an error.
"status": "A String", # [Output Only] Creation status of BulkInsert operation - information if the flow is rolling forward or rolling back.
"targetVmCount": 42, # [Output Only] Count of VMs originally planned to be created.
},
},
},
"kind": "compute#operation", # [Output Only] Type of the resource. Always `compute#operation` for Operation resources.
"name": "A String", # [Output Only] Name of the operation.
"operationGroupId": "A String", # [Output Only] An ID that represents a group of operations, such as when a group of operations results from a `bulkInsert` API request.
"operationType": "A String", # [Output Only] The type of operation, such as `insert`, `update`, or `delete`, and so on.
"progress": 42, # [Output Only] An optional progress indicator that ranges from 0 to 100. There is no requirement that this be linear or support any granularity of operations. This should not be used to guess when the operation will be complete. This number should monotonically increase as the operation progresses.
"region": "A String", # [Output Only] The URL of the region where the operation resides. Only applicable when performing regional operations.
"selfLink": "A String", # [Output Only] Server-defined URL for the resource.
"setCommonInstanceMetadataOperationMetadata": { # [Output Only] If the operation is for projects.setCommonInstanceMetadata, this field will contain information on all underlying zonal actions and their state.
"clientOperationId": "A String", # [Output Only] The client operation id.
"perLocationOperations": { # [Output Only] Status information per location (location name is key). Example key: zones/us-central1-a
"a_key": {
"error": { # The `Status` type defines a logical error model that is suitable for different programming environments, including REST APIs and RPC APIs. It is used by [gRPC](https://github.com/grpc). Each `Status` message contains three pieces of data: error code, error message, and error details. You can find out more about this error model and how to work with it in the [API Design Guide](https://cloud.google.com/apis/design/errors). # [Output Only] If state is `ABANDONED` or `FAILED`, this field is populated.
"code": 42, # The status code, which should be an enum value of google.rpc.Code.
"details": [ # A list of messages that carry the error details. There is a common set of message types for APIs to use.
{
"a_key": "", # Properties of the object. Contains field @type with type URL.
},
],
"message": "A String", # A developer-facing error message, which should be in English. Any user-facing error message should be localized and sent in the google.rpc.Status.details field, or localized by the client.
},
"state": "A String", # [Output Only] Status of the action, which can be one of the following: `PROPAGATING`, `PROPAGATED`, `ABANDONED`, `FAILED`, or `DONE`.
},
},
},
"startTime": "A String", # [Output Only] The time that this operation was started by the server. This value is in RFC3339 text format.
"status": "A String", # [Output Only] The status of the operation, which can be one of the following: `PENDING`, `RUNNING`, or `DONE`.
"statusMessage": "A String", # [Output Only] An optional textual description of the current status of the operation.
"targetId": "A String", # [Output Only] The unique target ID, which identifies a specific incarnation of the target resource.
"targetLink": "A String", # [Output Only] The URL of the resource that the operation modifies. For operations related to creating a snapshot, this points to the disk that the snapshot was created from.
"user": "A String", # [Output Only] User who requested the operation, for example: `user@example.com` or `alice_smith_identifier (global/workforcePools/example-com-us-employees)`.
"warnings": [ # [Output Only] If warning messages are generated during processing of the operation, this field will be populated.
{
"code": "A String", # [Output Only] A warning code, if applicable. For example, Compute Engine returns NO_RESULTS_ON_PAGE if there are no results in the response.
"data": [ # [Output Only] Metadata about this warning in key: value format. For example: "data": [ { "key": "scope", "value": "zones/us-east1-d" }
{
"key": "A String", # [Output Only] A key that provides more detail on the warning being returned. For example, for warnings where there are no results in a list request for a particular zone, this key might be scope and the key value might be the zone name. Other examples might be a key indicating a deprecated resource and a suggested replacement, or a warning about invalid network settings (for example, if an instance attempts to perform IP forwarding but is not enabled for IP forwarding).
"value": "A String", # [Output Only] A warning data value corresponding to the key.
},
],
"message": "A String", # [Output Only] A human-readable description of the warning code.
},
],
"zone": "A String", # [Output Only] The URL of the zone where the operation resides. Only applicable when performing per-zone operations.
}

patchRoutePolicy(project, region, router, body=None, requestId=None, x__xgafv=None)

Patches Route Policy

Args:
  project: string, Project ID for this request. (required)
  region: string, Name of the region for this request. (required)
  router: string, Name of the Router resource where Route Policy is defined. (required)
  body: object, The request body.
    The object takes the form of:

{
  "description": "A String", # An optional description of route policy.
  "fingerprint": "A String", # A fingerprint for the Route Policy being applied to this Router, which is essentially a hash of the Route Policy used for optimistic locking. The fingerprint is initially generated by Compute Engine and changes after every request to modify or update Route Policy. You must always provide an up-to-date fingerprint hash in order to update or change labels. To see the latest fingerprint, make a getRoutePolicy() request to retrieve a Route Policy.
  "name": "A String", # Route Policy name, which must be a resource ID segment and unique within all the router's Route Policies. Name should conform to RFC1035.
  "terms": [ # List of terms (the order in the list is not important, they are evaluated in order of priority). Order of policies is not retained and might change when getting policy later.
    {
      "actions": [ # CEL expressions to evaluate to modify a route when this term matches.
        { # Represents a textual expression in the Common Expression Language (CEL) syntax. CEL is a C-like expression language. The syntax and semantics of CEL are documented at https://github.com/google/cel-spec. Example (Comparison): title: "Summary size limit" description: "Determines if a summary is less than 100 chars" expression: "document.summary.size() < 100" Example (Equality): title: "Requestor is owner" description: "Determines if requestor is the document owner" expression: "document.owner == request.auth.claims.email" Example (Logic): title: "Public documents" description: "Determine whether the document should be publicly visible" expression: "document.type != 'private' && document.type != 'internal'" Example (Data Manipulation): title: "Notification string" description: "Create a notification string with a timestamp." expression: "'New message received at ' + string(document.create_time)" The exact variables and functions that may be referenced within an expression are determined by the service that evaluates it. See the service documentation for additional information.
          "description": "A String", # Optional. Description of the expression. This is a longer text which describes the expression, e.g. when hovered over it in a UI.
          "expression": "A String", # Textual representation of an expression in Common Expression Language syntax.
          "location": "A String", # Optional. String indicating the location of the expression for error reporting, e.g. a file name and a position in the file.
          "title": "A String", # Optional. Title for the expression, i.e. a short string describing its purpose. This can be used e.g. in UIs which allow to enter the expression.
        },
      ],
      "match": { # Represents a textual expression in the Common Expression Language (CEL) syntax. CEL is a C-like expression language. The syntax and semantics of CEL are documented at https://github.com/google/cel-spec. Example (Comparison): title: "Summary size limit" description: "Determines if a summary is less than 100 chars" expression: "document.summary.size() < 100" Example (Equality): title: "Requestor is owner" description: "Determines if requestor is the document owner" expression: "document.owner == request.auth.claims.email" Example (Logic): title: "Public documents" description: "Determine whether the document should be publicly visible" expression: "document.type != 'private' && document.type != 'internal'" Example (Data Manipulation): title: "Notification string" description: "Create a notification string with a timestamp." expression: "'New message received at ' + string(document.create_time)" The exact variables and functions that may be referenced within an expression are determined by the service that evaluates it. See the service documentation for additional information. # CEL expression evaluated against a route to determine if this term applies. When not set, the term applies to all routes.
        "description": "A String", # Optional. Description of the expression. This is a longer text which describes the expression, e.g. when hovered over it in a UI.
        "expression": "A String", # Textual representation of an expression in Common Expression Language syntax.
        "location": "A String", # Optional. String indicating the location of the expression for error reporting, e.g. a file name and a position in the file.
        "title": "A String", # Optional. Title for the expression, i.e. a short string describing its purpose. This can be used e.g. in UIs which allow to enter the expression.
      },
      "priority": 42, # The evaluation priority for this term, which must be between 0 (inclusive) and 2^31 (exclusive), and unique within the list.
    },
  ],
  "type": "A String",
}

  requestId: string, An optional request ID to identify requests. Specify a unique request ID so that if you must retry your request, the server will know to ignore the request if it has already been completed. For example, consider a situation where you make an initial request and the request times out. If you make the request again with the same request ID, the server can check if original operation with the same request ID was received, and if so, will ignore the second request. This prevents clients from accidentally creating duplicate commitments. The request ID must be a valid UUID with the exception that zero UUID is not supported ( 00000000-0000-0000-0000-000000000000).
  x__xgafv: string, V1 error format.
    Allowed values
      1 - v1 error format
      2 - v2 error format

Returns:
  An object of the form:

    { # Represents an Operation resource. Google Compute Engine has three Operation resources: * [Global](/compute/docs/reference/rest/beta/globalOperations) * [Regional](/compute/docs/reference/rest/beta/regionOperations) * [Zonal](/compute/docs/reference/rest/beta/zoneOperations) You can use an operation resource to manage asynchronous API requests. For more information, read Handling API responses. Operations can be global, regional or zonal. - For global operations, use the `globalOperations` resource. - For regional operations, use the `regionOperations` resource. - For zonal operations, use the `zoneOperations` resource. For more information, read Global, Regional, and Zonal Resources. Note that completed Operation resources have a limited retention period.
  "clientOperationId": "A String", # [Output Only] The value of `requestId` if you provided it in the request. Not present otherwise.
  "creationTimestamp": "A String", # [Deprecated] This field is deprecated.
  "description": "A String", # [Output Only] A textual description of the operation, which is set when the operation is created.
  "endTime": "A String", # [Output Only] The time that this operation was completed. This value is in RFC3339 text format.
  "error": { # [Output Only] If errors are generated during processing of the operation, this field will be populated.
    "errors": [ # [Output Only] The array of errors encountered while processing this operation.
      {
        "code": "A String", # [Output Only] The error type identifier for this error.
        "errorDetails": [ # [Output Only] An optional list of messages that contain the error details. There is a set of defined message types to use for providing details.The syntax depends on the error code. For example, QuotaExceededInfo will have details when the error code is QUOTA_EXCEEDED.
          {
            "errorInfo": { # Describes the cause of the error with structured details. Example of an error when contacting the "pubsub.googleapis.com" API when it is not enabled: { "reason": "API_DISABLED" "domain": "googleapis.com" "metadata": { "resource": "projects/123", "service": "pubsub.googleapis.com" } } This response indicates that the pubsub.googleapis.com API is not enabled. Example of an error that is returned when attempting to create a Spanner instance in a region that is out of stock: { "reason": "STOCKOUT" "domain": "spanner.googleapis.com", "metadata": { "availableRegions": "us-central1,us-east2" } }
              "domain": "A String", # The logical grouping to which the "reason" belongs. The error domain is typically the registered service name of the tool or product that generates the error. Example: "pubsub.googleapis.com". If the error is generated by some common infrastructure, the error domain must be a globally unique value that identifies the infrastructure. For Google API infrastructure, the error domain is "googleapis.com".
              "metadatas": { # Additional structured details about this error. Keys must match /a-z+/ but should ideally be lowerCamelCase. Also they must be limited to 64 characters in length. When identifying the current value of an exceeded limit, the units should be contained in the key, not the value. For example, rather than {"instanceLimit": "100/request"}, should be returned as, {"instanceLimitPerRequest": "100"}, if the client exceeds the number of instances that can be created in a single (batch) request.
                "a_key": "A String",
              },
              "reason": "A String", # The reason of the error. This is a constant value that identifies the proximate cause of the error. Error reasons are unique within a particular domain of errors. This should be at most 63 characters and match a regular expression of `A-Z+[A-Z0-9]`, which represents UPPER_SNAKE_CASE.
            },
            "help": { # Provides links to documentation or for performing an out of band action. For example, if a quota check failed with an error indicating the calling project hasn't enabled the accessed service, this can contain a URL pointing directly to the right place in the developer console to flip the bit.
              "links": [ # URL(s) pointing to additional information on handling the current error.
                { # Describes a URL link.
                  "description": "A String", # Describes what the link offers.
                  "url": "A String", # The URL of the link.
                },
              ],
            },
            "localizedMessage": { # Provides a localized error message that is safe to return to the user which can be attached to an RPC error.
              "locale": "A String", # The locale used following the specification defined at https://www.rfc-editor.org/rfc/bcp/bcp47.txt. Examples are: "en-US", "fr-CH", "es-MX"
              "message": "A String", # The localized error message in the above locale.
            },
            "quotaInfo": { # Additional details for quota exceeded error for resource quota.
              "dimensions": { # The map holding related quota dimensions.
                "a_key": "A String",
              },
              "futureLimit": 3.14, # Future quota limit being rolled out. The limit's unit depends on the quota type or metric.
              "limit": 3.14, # Current effective quota limit. The limit's unit depends on the quota type or metric.
              "limitName": "A String", # The name of the quota limit.
              "metricName": "A String", # The Compute Engine quota metric name.
              "rolloutStatus": "A String", # Rollout status of the future quota limit.
            },
          },
        ],
        "location": "A String", # [Output Only] Indicates the field in the request that caused the error. This property is optional.
        "message": "A String", # [Output Only] An optional, human-readable error message.
      },
    ],
  },
  "httpErrorMessage": "A String", # [Output Only] If the operation fails, this field contains the HTTP error message that was returned, such as `NOT FOUND`.
  "httpErrorStatusCode": 42, # [Output Only] If the operation fails, this field contains the HTTP error status code that was returned. For example, a `404` means the resource was not found.
  "id": "A String", # [Output Only] The unique identifier for the operation. This identifier is defined by the server.
  "insertTime": "A String", # [Output Only] The time that this operation was requested. This value is in RFC3339 text format.
  "instancesBulkInsertOperationMetadata": {
    "perLocationStatus": { # Status information per location (location name is key). Example key: zones/us-central1-a
      "a_key": {
        "createdVmCount": 42, # [Output Only] Count of VMs successfully created so far.
        "deletedVmCount": 42, # [Output Only] Count of VMs that got deleted during rollback.
        "failedToCreateVmCount": 42, # [Output Only] Count of VMs that started creating but encountered an error.
        "status": "A String", # [Output Only] Creation status of BulkInsert operation - information if the flow is rolling forward or rolling back.
        "targetVmCount": 42, # [Output Only] Count of VMs originally planned to be created.
      },
    },
  },
  "kind": "compute#operation", # [Output Only] Type of the resource. Always `compute#operation` for Operation resources.
  "name": "A String", # [Output Only] Name of the operation.
  "operationGroupId": "A String", # [Output Only] An ID that represents a group of operations, such as when a group of operations results from a `bulkInsert` API request.
  "operationType": "A String", # [Output Only] The type of operation, such as `insert`, `update`, or `delete`, and so on.
  "progress": 42, # [Output Only] An optional progress indicator that ranges from 0 to 100. There is no requirement that this be linear or support any granularity of operations. This should not be used to guess when the operation will be complete. This number should monotonically increase as the operation progresses.
  "region": "A String", # [Output Only] The URL of the region where the operation resides. Only applicable when performing regional operations.
  "selfLink": "A String", # [Output Only] Server-defined URL for the resource.
  "setCommonInstanceMetadataOperationMetadata": { # [Output Only] If the operation is for projects.setCommonInstanceMetadata, this field will contain information on all underlying zonal actions and their state.
    "clientOperationId": "A String", # [Output Only] The client operation id.
    "perLocationOperations": { # [Output Only] Status information per location (location name is key). Example key: zones/us-central1-a
      "a_key": {
        "error": { # The `Status` type defines a logical error model that is suitable for different programming environments, including REST APIs and RPC APIs. It is used by [gRPC](https://github.com/grpc). Each `Status` message contains three pieces of data: error code, error message, and error details. You can find out more about this error model and how to work with it in the [API Design Guide](https://cloud.google.com/apis/design/errors). # [Output Only] If state is `ABANDONED` or `FAILED`, this field is populated.
          "code": 42, # The status code, which should be an enum value of google.rpc.Code.
          "details": [ # A list of messages that carry the error details. There is a common set of message types for APIs to use.
            {
              "a_key": "", # Properties of the object. Contains field @type with type URL.
            },
          ],
          "message": "A String", # A developer-facing error message, which should be in English. Any user-facing error message should be localized and sent in the google.rpc.Status.details field, or localized by the client.
        },
        "state": "A String", # [Output Only] Status of the action, which can be one of the following: `PROPAGATING`, `PROPAGATED`, `ABANDONED`, `FAILED`, or `DONE`.
      },
    },
  },
  "startTime": "A String", # [Output Only] The time that this operation was started by the server. This value is in RFC3339 text format.
  "status": "A String", # [Output Only] The status of the operation, which can be one of the following: `PENDING`, `RUNNING`, or `DONE`.
  "statusMessage": "A String", # [Output Only] An optional textual description of the current status of the operation.
  "targetId": "A String", # [Output Only] The unique target ID, which identifies a specific incarnation of the target resource.
  "targetLink": "A String", # [Output Only] The URL of the resource that the operation modifies. For operations related to creating a snapshot, this points to the disk that the snapshot was created from.
  "user": "A String", # [Output Only] User who requested the operation, for example: `user@example.com` or `alice_smith_identifier (global/workforcePools/example-com-us-employees)`.
  "warnings": [ # [Output Only] If warning messages are generated during processing of the operation, this field will be populated.
    {
      "code": "A String", # [Output Only] A warning code, if applicable. For example, Compute Engine returns NO_RESULTS_ON_PAGE if there are no results in the response.
      "data": [ # [Output Only] Metadata about this warning in key: value format. For example: "data": [ { "key": "scope", "value": "zones/us-east1-d" }
        {
          "key": "A String", # [Output Only] A key that provides more detail on the warning being returned. For example, for warnings where there are no results in a list request for a particular zone, this key might be scope and the key value might be the zone name. Other examples might be a key indicating a deprecated resource and a suggested replacement, or a warning about invalid network settings (for example, if an instance attempts to perform IP forwarding but is not enabled for IP forwarding).
          "value": "A String", # [Output Only] A warning data value corresponding to the key.
        },
      ],
      "message": "A String", # [Output Only] A human-readable description of the warning code.
    },
  ],
  "zone": "A String", # [Output Only] The URL of the zone where the operation resides. Only applicable when performing per-zone operations.
}

preview(project, region, router, body=None, x__xgafv=None)

Preview fields auto-generated during router create and update operations. Calling this method does NOT create or update the router.

Args:
project: string, Project ID for this request. (required)
region: string, Name of the region for this request. (required)
router: string, Name of the Router resource to query. (required)
body: object, The request body.
The object takes the form of:

{ # Represents a Cloud Router resource. For more information about Cloud Router, read the Cloud Router overview.
"bgp": { # BGP information specific to this router.
"advertiseMode": "A String", # User-specified flag to indicate which mode to use for advertisement. The options are DEFAULT or CUSTOM.
"advertisedGroups": [ # User-specified list of prefix groups to advertise in custom mode. This field can only be populated if advertise_mode is CUSTOM and is advertised to all peers of the router. These groups will be advertised in addition to any specified prefixes. Leave this field blank to advertise no custom groups.
"A String",
],
"advertisedIpRanges": [ # User-specified list of individual IP ranges to advertise in custom mode. This field can only be populated if advertise_mode is CUSTOM and is advertised to all peers of the router. These IP ranges will be advertised in addition to any specified groups. Leave this field blank to advertise no custom IP ranges.
{ # Description-tagged IP ranges for the router to advertise.
"description": "A String", # User-specified description for the IP range.
"range": "A String", # The IP range to advertise. The value must be a CIDR-formatted string.
},
],
"asn": 42, # Local BGP Autonomous System Number (ASN). Must be an RFC6996 private ASN, either 16-bit or 32-bit. The value will be fixed for this router resource. All VPN tunnels that link to this router will have the same local ASN.
"identifierRange": "A String", # Explicitly specifies a range of valid BGP Identifiers for this Router. It is provided as a link-local IPv4 range (from 169.254.0.0/16), of size at least /30, even if the BGP sessions are over IPv6. It must not overlap with any IPv4 BGP session ranges. Other vendors commonly call this "router ID".
"keepaliveInterval": 42, # The interval in seconds between BGP keepalive messages that are sent to the peer. Hold time is three times the interval at which keepalive messages are sent, and the hold time is the maximum number of seconds allowed to elapse between successive keepalive messages that BGP receives from a peer. BGP will use the smaller of either the local hold time value or the peer's hold time value as the hold time for the BGP connection between the two peers. If set, this value must be between 20 and 60. The default is 20.
},
"bgpPeers": [ # BGP information that must be configured into the routing stack to establish BGP peering. This information must specify the peer ASN and either the interface name, IP address, or peer IP address. Please refer to RFC4273.
{
"advertiseMode": "A String", # User-specified flag to indicate which mode to use for advertisement.
"advertisedGroups": [ # User-specified list of prefix groups to advertise in custom mode, which currently supports the following option: - ALL_SUBNETS: Advertises all of the router's own VPC subnets. This excludes any routes learned for subnets that use VPC Network Peering. Note that this field can only be populated if advertise_mode is CUSTOM and overrides the list defined for the router (in the "bgp" message). These groups are advertised in addition to any specified prefixes. Leave this field blank to advertise no custom groups.
"A String",
],
"advertisedIpRanges": [ # User-specified list of individual IP ranges to advertise in custom mode. This field can only be populated if advertise_mode is CUSTOM and overrides the list defined for the router (in the "bgp" message). These IP ranges are advertised in addition to any specified groups. Leave this field blank to advertise no custom IP ranges.
{ # Description-tagged IP ranges for the router to advertise.
"description": "A String", # User-specified description for the IP range.
"range": "A String", # The IP range to advertise. The value must be a CIDR-formatted string.
},
],
"advertisedRoutePriority": 42, # The priority of routes advertised to this BGP peer. Where there is more than one matching route of maximum length, the routes with the lowest priority value win.
"bfd": { # BFD configuration for the BGP peering.
"minReceiveInterval": 42, # The minimum interval, in milliseconds, between BFD control packets received from the peer router. The actual value is negotiated between the two routers and is equal to the greater of this value and the transmit interval of the other router. If set, this value must be between 1000 and 30000. The default is 1000.
"minTransmitInterval": 42, # The minimum interval, in milliseconds, between BFD control packets transmitted to the peer router. The actual value is negotiated between the two routers and is equal to the greater of this value and the corresponding receive interval of the other router. If set, this value must be between 1000 and 30000. The default is 1000.
"multiplier": 42, # The number of consecutive BFD packets that must be missed before BFD declares that a peer is unavailable. If set, the value must be a value between 5 and 16. The default is 5.
"sessionInitializationMode": "A String", # The BFD session initialization mode for this BGP peer. If set to ACTIVE, the Cloud Router will initiate the BFD session for this BGP peer. If set to PASSIVE, the Cloud Router will wait for the peer router to initiate the BFD session for this BGP peer. If set to DISABLED, BFD is disabled for this BGP peer. The default is DISABLED.
},
"customLearnedIpRanges": [ # A list of user-defined custom learned route IP address ranges for a BGP session.
{
"range": "A String", # The custom learned route IP address range. Must be a valid CIDR-formatted prefix. If an IP address is provided without a subnet mask, it is interpreted as, for IPv4, a `/32` singular IP address range, and, for IPv6, `/128`.
},
],
"customLearnedRoutePriority": 42, # The user-defined custom learned route priority for a BGP session. This value is applied to all custom learned route ranges for the session. You can choose a value from `0` to `65335`. If you don't provide a value, Google Cloud assigns a priority of `100` to the ranges.
"enable": "A String", # The status of the BGP peer connection. If set to FALSE, any active session with the peer is terminated and all associated routing information is removed. If set to TRUE, the peer connection can be established with routing information. The default is TRUE.
"enableIpv4": True or False, # Enable IPv4 traffic over BGP Peer. It is enabled by default if the peerIpAddress is version 4.
"enableIpv6": True or False, # Enable IPv6 traffic over BGP Peer. It is enabled by default if the peerIpAddress is version 6.
"exportPolicies": [ # List of export policies applied to this peer, in the order they must be evaluated. The name must correspond to an existing policy that has ROUTE_POLICY_TYPE_EXPORT type. Note that Route Policies are currently available in preview. Please use Beta API to use Route Policies.
"A String",
],
"importPolicies": [ # List of import policies applied to this peer, in the order they must be evaluated. The name must correspond to an existing policy that has ROUTE_POLICY_TYPE_IMPORT type. Note that Route Policies are currently available in preview. Please use Beta API to use Route Policies.
"A String",
],
"interfaceName": "A String", # Name of the interface the BGP peer is associated with.
"ipAddress": "A String", # IP address of the interface inside Google Cloud Platform.
"ipv4NexthopAddress": "A String", # IPv4 address of the interface inside Google Cloud Platform.
"ipv6NexthopAddress": "A String", # IPv6 address of the interface inside Google Cloud Platform.
"managementType": "A String", # [Output Only] The resource that configures and manages this BGP peer. - MANAGED_BY_USER is the default value and can be managed by you or other users - MANAGED_BY_ATTACHMENT is a BGP peer that is configured and managed by Cloud Interconnect, specifically by an InterconnectAttachment of type PARTNER. Google automatically creates, updates, and deletes this type of BGP peer when the PARTNER InterconnectAttachment is created, updated, or deleted.
"md5AuthenticationKeyName": "A String", # Present if MD5 authentication is enabled for the peering. Must be the name of one of the entries in the Router.md5_authentication_keys. The field must comply with RFC1035.
"name": "A String", # Name of this BGP peer. The name must be 1-63 characters long, and comply with RFC1035. Specifically, the name must be 1-63 characters long and match the regular expression `[a-z]([-a-z0-9]*[a-z0-9])?` which means the first character must be a lowercase letter, and all following characters must be a dash, lowercase letter, or digit, except the last character, which cannot be a dash.
"peerAsn": 42, # Peer BGP Autonomous System Number (ASN). Each BGP interface may use a different value.
"peerIpAddress": "A String", # IP address of the BGP interface outside Google Cloud Platform.
"peerIpv4NexthopAddress": "A String", # IPv4 address of the BGP interface outside Google Cloud Platform.
"peerIpv6NexthopAddress": "A String", # IPv6 address of the BGP interface outside Google Cloud Platform.
"routerApplianceInstance": "A String", # URI of the VM instance that is used as third-party router appliances such as Next Gen Firewalls, Virtual Routers, or Router Appliances. The VM instance must be located in zones contained in the same region as this Cloud Router. The VM instance is the peer side of the BGP session.
},
],
"creationTimestamp": "A String", # [Output Only] Creation timestamp in RFC3339 text format.
"description": "A String", # An optional description of this resource. Provide this property when you create the resource.
"encryptedInterconnectRouter": True or False, # Indicates if a router is dedicated for use with encrypted VLAN attachments (interconnectAttachments).
"id": "A String", # [Output Only] The unique identifier for the resource. This identifier is defined by the server.
"interfaces": [ # Router interfaces. To create a BGP peer that uses a router interface, the interface must have one of the following fields specified: - linkedVpnTunnel - linkedInterconnectAttachment - subnetwork You can create a router interface without any of these fields specified. However, you cannot create a BGP peer that uses that interface.
{
"ipRange": "A String", # IP address and range of the interface. - For Internet Protocol version 4 (IPv4), the IP range must be in the RFC3927 link-local IP address space. The value must be a CIDR-formatted string, for example, 169.254.0.1/30. Note: Do not truncate the IP address, as it represents the IP address of the interface. - For Internet Protocol version 6 (IPv6), the value must be a unique local address (ULA) range from fdff:1::/64 with a mask length of 126 or less. This value should be a CIDR-formatted string, for example, fc00:0:1:1::1/112. Within the router's VPC, this IPv6 prefix will be reserved exclusively for this connection and cannot be used for any other purpose.
"ipVersion": "A String", # IP version of this interface.
"linkedInterconnectAttachment": "A String", # URI of the linked Interconnect attachment. It must be in the same region as the router. Each interface can have one linked resource, which can be a VPN tunnel, an Interconnect attachment, or a subnetwork.
"linkedVpnTunnel": "A String", # URI of the linked VPN tunnel, which must be in the same region as the router. Each interface can have one linked resource, which can be a VPN tunnel, an Interconnect attachment, or a subnetwork.
"managementType": "A String", # [Output Only] The resource that configures and manages this interface. - MANAGED_BY_USER is the default value and can be managed directly by users. - MANAGED_BY_ATTACHMENT is an interface that is configured and managed by Cloud Interconnect, specifically, by an InterconnectAttachment of type PARTNER. Google automatically creates, updates, and deletes this type of interface when the PARTNER InterconnectAttachment is created, updated, or deleted.
"name": "A String", # Name of this interface entry. The name must be 1-63 characters long, and comply with RFC1035. Specifically, the name must be 1-63 characters long and match the regular expression `[a-z]([-a-z0-9]*[a-z0-9])?` which means the first character must be a lowercase letter, and all following characters must be a dash, lowercase letter, or digit, except the last character, which cannot be a dash.
"privateIpAddress": "A String", # The regional private internal IP address that is used to establish BGP sessions to a VM instance acting as a third-party Router Appliance, such as a Next Gen Firewall, a Virtual Router, or an SD-WAN VM.
"redundantInterface": "A String", # Name of the interface that will be redundant with the current interface you are creating. The redundantInterface must belong to the same Cloud Router as the interface here. To establish the BGP session to a Router Appliance VM, you must create two BGP peers. The two BGP peers must be attached to two separate interfaces that are redundant with each other. The redundant_interface must be 1-63 characters long, and comply with RFC1035. Specifically, the redundant_interface must be 1-63 characters long and match the regular expression `[a-z]([-a-z0-9]*[a-z0-9])?` which means the first character must be a lowercase letter, and all following characters must be a dash, lowercase letter, or digit, except the last character, which cannot be a dash.
"subnetwork": "A String", # The URI of the subnetwork resource that this interface belongs to, which must be in the same region as the Cloud Router. When you establish a BGP session to a VM instance using this interface, the VM instance must belong to the same subnetwork as the subnetwork specified here.
},
],
"kind": "compute#router", # [Output Only] Type of resource. Always compute#router for routers.
"md5AuthenticationKeys": [ # Keys used for MD5 authentication.
{
"key": "A String", # [Input only] Value of the key. For patch and update calls, it can be skipped to copy the value from the previous configuration. This is allowed if the key with the same name existed before the operation. Maximum length is 80 characters. Can only contain printable ASCII characters.
"name": "A String", # Name used to identify the key. Must be unique within a router. Must be referenced by exactly one bgpPeer. Must comply with RFC1035.
},
],
"name": "A String", # Name of the resource. Provided by the client when the resource is created. The name must be 1-63 characters long, and comply with RFC1035. Specifically, the name must be 1-63 characters long and match the regular expression `[a-z]([-a-z0-9]*[a-z0-9])?` which means the first character must be a lowercase letter, and all following characters must be a dash, lowercase letter, or digit, except the last character, which cannot be a dash.
"nats": [ # A list of NAT services created in this router.
{ # Represents a Nat resource. It enables the VMs within the specified subnetworks to access Internet without external IP addresses. It specifies a list of subnetworks (and the ranges within) that want to use NAT. Customers can also provide the external IPs that would be used for NAT. GCP would auto-allocate ephemeral IPs if no external IPs are provided.
"autoNetworkTier": "A String", # The network tier to use when automatically reserving NAT IP addresses. Must be one of: PREMIUM, STANDARD. If not specified, then the current project-level default tier is used.
"drainNatIps": [ # A list of URLs of the IP resources to be drained. These IPs must be valid static external IPs that have been assigned to the NAT. These IPs should be used for updating/patching a NAT only.
"A String",
],
"enableDynamicPortAllocation": True or False, # Enable Dynamic Port Allocation. If not specified, it is disabled by default. If set to true, - Dynamic Port Allocation will be enabled on this NAT config. - enableEndpointIndependentMapping cannot be set to true. - If minPorts is set, minPortsPerVm must be set to a power of two greater than or equal to 32. If minPortsPerVm is not set, a minimum of 32 ports will be allocated to a VM from this NAT config.
"enableEndpointIndependentMapping": True or False,
"endpointTypes": [ # List of NAT-ted endpoint types supported by the Nat Gateway. If the list is empty, then it will be equivalent to include ENDPOINT_TYPE_VM
"A String",
],
"icmpIdleTimeoutSec": 42, # Timeout (in seconds) for ICMP connections. Defaults to 30s if not set.
"logConfig": { # Configuration of logging on a NAT. # Configure logging on this NAT.
"enable": True or False, # Indicates whether or not to export logs. This is false by default.
"filter": "A String", # Specify the desired filtering of logs on this NAT. If unspecified, logs are exported for all connections handled by this NAT. This option can take one of the following values: - ERRORS_ONLY: Export logs only for connection failures. - TRANSLATIONS_ONLY: Export logs only for successful connections. - ALL: Export logs for all connections, successful and unsuccessful.
},
"maxPortsPerVm": 42, # Maximum number of ports allocated to a VM from this NAT config when Dynamic Port Allocation is enabled. If Dynamic Port Allocation is not enabled, this field has no effect. If Dynamic Port Allocation is enabled, and this field is set, it must be set to a power of two greater than minPortsPerVm, or 64 if minPortsPerVm is not set. If Dynamic Port Allocation is enabled and this field is not set, a maximum of 65536 ports will be allocated to a VM from this NAT config.
"minPortsPerVm": 42, # Minimum number of ports allocated to a VM from this NAT config. If not set, a default number of ports is allocated to a VM. This is rounded up to the nearest power of 2. For example, if the value of this field is 50, at least 64 ports are allocated to a VM.
"name": "A String", # Unique name of this Nat service. The name must be 1-63 characters long and comply with RFC1035.
"natIpAllocateOption": "A String", # Specify the NatIpAllocateOption, which can take one of the following values: - MANUAL_ONLY: Uses only Nat IP addresses provided by customers. When there are not enough specified Nat IPs, the Nat service fails for new VMs. - AUTO_ONLY: Nat IPs are allocated by Google Cloud Platform; customers can't specify any Nat IPs. When choosing AUTO_ONLY, then nat_ip should be empty.
"natIps": [ # A list of URLs of the IP resources used for this Nat service. These IP addresses must be valid static external IP addresses assigned to the project.
"A String",
],
"rules": [ # A list of rules associated with this NAT.
{
"action": { # The action to be enforced for traffic that matches this rule.
"sourceNatActiveIps": [ # A list of URLs of the IP resources used for this NAT rule. These IP addresses must be valid static external IP addresses assigned to the project. This field is used for public NAT.
"A String",
],
"sourceNatActiveRanges": [ # A list of URLs of the subnetworks used as source ranges for this NAT Rule. These subnetworks must have purpose set to PRIVATE_NAT. This field is used for private NAT.
"A String",
],
"sourceNatDrainIps": [ # A list of URLs of the IP resources to be drained. These IPs must be valid static external IPs that have been assigned to the NAT. These IPs should be used for updating/patching a NAT rule only. This field is used for public NAT.
"A String",
],
"sourceNatDrainRanges": [ # A list of URLs of subnetworks representing source ranges to be drained. This is only supported on patch/update, and these subnetworks must have previously been used as active ranges in this NAT Rule. This field is used for private NAT.
"A String",
],
},
"description": "A String", # An optional description of this rule.
"match": "A String", # CEL expression that specifies the match condition that egress traffic from a VM is evaluated against. If it evaluates to true, the corresponding `action` is enforced. The following examples are valid match expressions for public NAT: `inIpRange(destination.ip, '1.1.0.0/16') || inIpRange(destination.ip, '2.2.0.0/16')` `destination.ip == '1.1.0.1' || destination.ip == '8.8.8.8'` The following example is a valid match expression for private NAT: `nexthop.hub == '//networkconnectivity.googleapis.com/projects/my-project/locations/global/hubs/hub-1'`
"ruleNumber": 42, # An integer uniquely identifying a rule in the list. The rule number must be a positive value between 0 and 65000, and must be unique among rules within a NAT.
},
],
"sourceSubnetworkIpRangesToNat": "A String", # Specify the Nat option, which can take one of the following values: - ALL_SUBNETWORKS_ALL_IP_RANGES: All of the IP ranges in every Subnetwork are allowed to Nat. - ALL_SUBNETWORKS_ALL_PRIMARY_IP_RANGES: All of the primary IP ranges in every Subnetwork are allowed to Nat. - LIST_OF_SUBNETWORKS: A list of Subnetworks are allowed to Nat (specified in the field subnetwork below) The default is SUBNETWORK_IP_RANGE_TO_NAT_OPTION_UNSPECIFIED. Note that if this field contains ALL_SUBNETWORKS_ALL_IP_RANGES then there should not be any other Router.Nat section in any Router for this network in this region.
"subnetworks": [ # A list of Subnetwork resources whose traffic should be translated by NAT Gateway. It is used only when LIST_OF_SUBNETWORKS is selected for the SubnetworkIpRangeToNatOption above.
{ # Defines the IP ranges that want to use NAT for a subnetwork.
"name": "A String", # URL for the subnetwork resource that will use NAT.
"secondaryIpRangeNames": [ # A list of the secondary ranges of the Subnetwork that are allowed to use NAT. This can be populated only if "LIST_OF_SECONDARY_IP_RANGES" is one of the values in source_ip_ranges_to_nat.
"A String",
],
"sourceIpRangesToNat": [ # Specify the options for NAT ranges in the Subnetwork. All options of a single value are valid except NAT_IP_RANGE_OPTION_UNSPECIFIED. The only valid option with multiple values is: ["PRIMARY_IP_RANGE", "LIST_OF_SECONDARY_IP_RANGES"] Default: [ALL_IP_RANGES]
"A String",
],
},
],
"tcpEstablishedIdleTimeoutSec": 42, # Timeout (in seconds) for TCP established connections. Defaults to 1200s if not set.
"tcpTimeWaitTimeoutSec": 42, # Timeout (in seconds) for TCP connections that are in TIME_WAIT state. Defaults to 120s if not set.
"tcpTransitoryIdleTimeoutSec": 42, # Timeout (in seconds) for TCP transitory connections. Defaults to 30s if not set.
"type": "A String", # Indicates whether this NAT is used for public or private IP translation. If unspecified, it defaults to PUBLIC.
"udpIdleTimeoutSec": 42, # Timeout (in seconds) for UDP connections. Defaults to 30s if not set.
},
],
"network": "A String", # URI of the network to which this router belongs.
"region": "A String", # [Output Only] URI of the region where the router resides. You must specify this field as part of the HTTP request URL. It is not settable as a field in the request body.
"selfLink": "A String", # [Output Only] Server-defined URL for the resource.
}

x__xgafv: string, V1 error format.
Allowed values
1 - v1 error format
2 - v2 error format

Returns:
An object of the form:

{
"resource": { # Represents a Cloud Router resource. For more information about Cloud Router, read the Cloud Router overview. # Preview of given router.
"bgp": { # BGP information specific to this router.
"advertiseMode": "A String", # User-specified flag to indicate which mode to use for advertisement. The options are DEFAULT or CUSTOM.
"advertisedGroups": [ # User-specified list of prefix groups to advertise in custom mode. This field can only be populated if advertise_mode is CUSTOM and is advertised to all peers of the router. These groups will be advertised in addition to any specified prefixes. Leave this field blank to advertise no custom groups.
"A String",
],
"advertisedIpRanges": [ # User-specified list of individual IP ranges to advertise in custom mode. This field can only be populated if advertise_mode is CUSTOM and is advertised to all peers of the router. These IP ranges will be advertised in addition to any specified groups. Leave this field blank to advertise no custom IP ranges.
{ # Description-tagged IP ranges for the router to advertise.
"description": "A String", # User-specified description for the IP range.
"range": "A String", # The IP range to advertise. The value must be a CIDR-formatted string.
},
],
"asn": 42, # Local BGP Autonomous System Number (ASN). Must be an RFC6996 private ASN, either 16-bit or 32-bit. The value will be fixed for this router resource. All VPN tunnels that link to this router will have the same local ASN.
"identifierRange": "A String", # Explicitly specifies a range of valid BGP Identifiers for this Router. It is provided as a link-local IPv4 range (from 169.254.0.0/16), of size at least /30, even if the BGP sessions are over IPv6. It must not overlap with any IPv4 BGP session ranges. Other vendors commonly call this "router ID".
"keepaliveInterval": 42, # The interval in seconds between BGP keepalive messages that are sent to the peer. Hold time is three times the interval at which keepalive messages are sent, and the hold time is the maximum number of seconds allowed to elapse between successive keepalive messages that BGP receives from a peer. BGP will use the smaller of either the local hold time value or the peer's hold time value as the hold time for the BGP connection between the two peers. If set, this value must be between 20 and 60. The default is 20.
},
"bgpPeers": [ # BGP information that must be configured into the routing stack to establish BGP peering. This information must specify the peer ASN and either the interface name, IP address, or peer IP address. Please refer to RFC4273.
{
"advertiseMode": "A String", # User-specified flag to indicate which mode to use for advertisement.
"advertisedGroups": [ # User-specified list of prefix groups to advertise in custom mode, which currently supports the following option: - ALL_SUBNETS: Advertises all of the router's own VPC subnets. This excludes any routes learned for subnets that use VPC Network Peering. Note that this field can only be populated if advertise_mode is CUSTOM and overrides the list defined for the router (in the "bgp" message). These groups are advertised in addition to any specified prefixes. Leave this field blank to advertise no custom groups.
"A String",
],
"advertisedIpRanges": [ # User-specified list of individual IP ranges to advertise in custom mode. This field can only be populated if advertise_mode is CUSTOM and overrides the list defined for the router (in the "bgp" message). These IP ranges are advertised in addition to any specified groups. Leave this field blank to advertise no custom IP ranges.
{ # Description-tagged IP ranges for the router to advertise.
"description": "A String", # User-specified description for the IP range.
"range": "A String", # The IP range to advertise. The value must be a CIDR-formatted string.
},
],
"advertisedRoutePriority": 42, # The priority of routes advertised to this BGP peer. Where there is more than one matching route of maximum length, the routes with the lowest priority value win.
"bfd": { # BFD configuration for the BGP peering.
"minReceiveInterval": 42, # The minimum interval, in milliseconds, between BFD control packets received from the peer router. The actual value is negotiated between the two routers and is equal to the greater of this value and the transmit interval of the other router. If set, this value must be between 1000 and 30000. The default is 1000.
"minTransmitInterval": 42, # The minimum interval, in milliseconds, between BFD control packets transmitted to the peer router. The actual value is negotiated between the two routers and is equal to the greater of this value and the corresponding receive interval of the other router. If set, this value must be between 1000 and 30000. The default is 1000.
"multiplier": 42, # The number of consecutive BFD packets that must be missed before BFD declares that a peer is unavailable. If set, the value must be a value between 5 and 16. The default is 5.
"sessionInitializationMode": "A String", # The BFD session initialization mode for this BGP peer. If set to ACTIVE, the Cloud Router will initiate the BFD session for this BGP peer. If set to PASSIVE, the Cloud Router will wait for the peer router to initiate the BFD session for this BGP peer. If set to DISABLED, BFD is disabled for this BGP peer. The default is DISABLED.
},
"customLearnedIpRanges": [ # A list of user-defined custom learned route IP address ranges for a BGP session.
{
"range": "A String", # The custom learned route IP address range. Must be a valid CIDR-formatted prefix. If an IP address is provided without a subnet mask, it is interpreted as, for IPv4, a `/32` singular IP address range, and, for IPv6, `/128`.
},
],
"customLearnedRoutePriority": 42, # The user-defined custom learned route priority for a BGP session. This value is applied to all custom learned route ranges for the session. You can choose a value from `0` to `65335`. If you don't provide a value, Google Cloud assigns a priority of `100` to the ranges.
"enable": "A String", # The status of the BGP peer connection. If set to FALSE, any active session with the peer is terminated and all associated routing information is removed. If set to TRUE, the peer connection can be established with routing information. The default is TRUE.
"enableIpv4": True or False, # Enable IPv4 traffic over BGP Peer. It is enabled by default if the peerIpAddress is version 4.
"enableIpv6": True or False, # Enable IPv6 traffic over BGP Peer. It is enabled by default if the peerIpAddress is version 6.
"exportPolicies": [ # List of export policies applied to this peer, in the order they must be evaluated. The name must correspond to an existing policy that has ROUTE_POLICY_TYPE_EXPORT type. Note that Route Policies are currently available in preview. Please use Beta API to use Route Policies.
"A String",
],
"importPolicies": [ # List of import policies applied to this peer, in the order they must be evaluated. The name must correspond to an existing policy that has ROUTE_POLICY_TYPE_IMPORT type. Note that Route Policies are currently available in preview. Please use Beta API to use Route Policies.
"A String",
],
"interfaceName": "A String", # Name of the interface the BGP peer is associated with.
"ipAddress": "A String", # IP address of the interface inside Google Cloud Platform.
"ipv4NexthopAddress": "A String", # IPv4 address of the interface inside Google Cloud Platform.
"ipv6NexthopAddress": "A String", # IPv6 address of the interface inside Google Cloud Platform.
"managementType": "A String", # [Output Only] The resource that configures and manages this BGP peer. - MANAGED_BY_USER is the default value and can be managed by you or other users - MANAGED_BY_ATTACHMENT is a BGP peer that is configured and managed by Cloud Interconnect, specifically by an InterconnectAttachment of type PARTNER. Google automatically creates, updates, and deletes this type of BGP peer when the PARTNER InterconnectAttachment is created, updated, or deleted.
"md5AuthenticationKeyName": "A String", # Present if MD5 authentication is enabled for the peering. Must be the name of one of the entries in the Router.md5_authentication_keys. The field must comply with RFC1035.
"name": "A String", # Name of this BGP peer. The name must be 1-63 characters long, and comply with RFC1035. Specifically, the name must be 1-63 characters long and match the regular expression `[a-z]([-a-z0-9]*[a-z0-9])?` which means the first character must be a lowercase letter, and all following characters must be a dash, lowercase letter, or digit, except the last character, which cannot be a dash.
"peerAsn": 42, # Peer BGP Autonomous System Number (ASN). Each BGP interface may use a different value.
"peerIpAddress": "A String", # IP address of the BGP interface outside Google Cloud Platform.
"peerIpv4NexthopAddress": "A String", # IPv4 address of the BGP interface outside Google Cloud Platform.
"peerIpv6NexthopAddress": "A String", # IPv6 address of the BGP interface outside Google Cloud Platform.
"routerApplianceInstance": "A String", # URI of the VM instance that is used as third-party router appliances such as Next Gen Firewalls, Virtual Routers, or Router Appliances. The VM instance must be located in zones contained in the same region as this Cloud Router. The VM instance is the peer side of the BGP session.
},
],
"creationTimestamp": "A String", # [Output Only] Creation timestamp in RFC3339 text format.
"description": "A String", # An optional description of this resource. Provide this property when you create the resource.
"encryptedInterconnectRouter": True or False, # Indicates if a router is dedicated for use with encrypted VLAN attachments (interconnectAttachments).
"id": "A String", # [Output Only] The unique identifier for the resource. This identifier is defined by the server.
"interfaces": [ # Router interfaces. To create a BGP peer that uses a router interface, the interface must have one of the following fields specified: - linkedVpnTunnel - linkedInterconnectAttachment - subnetwork You can create a router interface without any of these fields specified. However, you cannot create a BGP peer that uses that interface.
{
"ipRange": "A String", # IP address and range of the interface. - For Internet Protocol version 4 (IPv4), the IP range must be in the RFC3927 link-local IP address space. The value must be a CIDR-formatted string, for example, 169.254.0.1/30. Note: Do not truncate the IP address, as it represents the IP address of the interface. - For Internet Protocol version 6 (IPv6), the value must be a unique local address (ULA) range from fdff:1::/64 with a mask length of 126 or less. This value should be a CIDR-formatted string, for example, fc00:0:1:1::1/112. Within the router's VPC, this IPv6 prefix will be reserved exclusively for this connection and cannot be used for any other purpose.
"ipVersion": "A String", # IP version of this interface.
"linkedInterconnectAttachment": "A String", # URI of the linked Interconnect attachment. It must be in the same region as the router. Each interface can have one linked resource, which can be a VPN tunnel, an Interconnect attachment, or a subnetwork.
"linkedVpnTunnel": "A String", # URI of the linked VPN tunnel, which must be in the same region as the router. Each interface can have one linked resource, which can be a VPN tunnel, an Interconnect attachment, or a subnetwork.
"managementType": "A String", # [Output Only] The resource that configures and manages this interface. - MANAGED_BY_USER is the default value and can be managed directly by users. - MANAGED_BY_ATTACHMENT is an interface that is configured and managed by Cloud Interconnect, specifically, by an InterconnectAttachment of type PARTNER. Google automatically creates, updates, and deletes this type of interface when the PARTNER InterconnectAttachment is created, updated, or deleted.
"name": "A String", # Name of this interface entry. The name must be 1-63 characters long, and comply with RFC1035. Specifically, the name must be 1-63 characters long and match the regular expression `[a-z]([-a-z0-9]*[a-z0-9])?` which means the first character must be a lowercase letter, and all following characters must be a dash, lowercase letter, or digit, except the last character, which cannot be a dash.
"privateIpAddress": "A String", # The regional private internal IP address that is used to establish BGP sessions to a VM instance acting as a third-party Router Appliance, such as a Next Gen Firewall, a Virtual Router, or an SD-WAN VM.
"redundantInterface": "A String", # Name of the interface that will be redundant with the current interface you are creating. The redundantInterface must belong to the same Cloud Router as the interface here. To establish the BGP session to a Router Appliance VM, you must create two BGP peers. The two BGP peers must be attached to two separate interfaces that are redundant with each other. The redundant_interface must be 1-63 characters long, and comply with RFC1035. Specifically, the redundant_interface must be 1-63 characters long and match the regular expression `[a-z]([-a-z0-9]*[a-z0-9])?` which means the first character must be a lowercase letter, and all following characters must be a dash, lowercase letter, or digit, except the last character, which cannot be a dash.
"subnetwork": "A String", # The URI of the subnetwork resource that this interface belongs to, which must be in the same region as the Cloud Router. When you establish a BGP session to a VM instance using this interface, the VM instance must belong to the same subnetwork as the subnetwork specified here.
},
],
"kind": "compute#router", # [Output Only] Type of resource. Always compute#router for routers.
"md5AuthenticationKeys": [ # Keys used for MD5 authentication.
{
"key": "A String", # [Input only] Value of the key. For patch and update calls, it can be skipped to copy the value from the previous configuration. This is allowed if the key with the same name existed before the operation. Maximum length is 80 characters. Can only contain printable ASCII characters.
"name": "A String", # Name used to identify the key. Must be unique within a router. Must be referenced by exactly one bgpPeer. Must comply with RFC1035.
},
],
"name": "A String", # Name of the resource. Provided by the client when the resource is created. The name must be 1-63 characters long, and comply with RFC1035. Specifically, the name must be 1-63 characters long and match the regular expression `[a-z]([-a-z0-9]*[a-z0-9])?` which means the first character must be a lowercase letter, and all following characters must be a dash, lowercase letter, or digit, except the last character, which cannot be a dash.
"nats": [ # A list of NAT services created in this router.
{ # Represents a Nat resource. It enables the VMs within the specified subnetworks to access Internet without external IP addresses. It specifies a list of subnetworks (and the ranges within) that want to use NAT. Customers can also provide the external IPs that would be used for NAT. GCP would auto-allocate ephemeral IPs if no external IPs are provided.
"autoNetworkTier": "A String", # The network tier to use when automatically reserving NAT IP addresses. Must be one of: PREMIUM, STANDARD. If not specified, then the current project-level default tier is used.
"drainNatIps": [ # A list of URLs of the IP resources to be drained. These IPs must be valid static external IPs that have been assigned to the NAT. These IPs should be used for updating/patching a NAT only.
"A String",
],
"enableDynamicPortAllocation": True or False, # Enable Dynamic Port Allocation. If not specified, it is disabled by default. If set to true, - Dynamic Port Allocation will be enabled on this NAT config. - enableEndpointIndependentMapping cannot be set to true. - If minPorts is set, minPortsPerVm must be set to a power of two greater than or equal to 32. If minPortsPerVm is not set, a minimum of 32 ports will be allocated to a VM from this NAT config.
"enableEndpointIndependentMapping": True or False,
"endpointTypes": [ # List of NAT-ted endpoint types supported by the Nat Gateway. If the list is empty, then it will be equivalent to include ENDPOINT_TYPE_VM
"A String",
],
"icmpIdleTimeoutSec": 42, # Timeout (in seconds) for ICMP connections. Defaults to 30s if not set.
"logConfig": { # Configuration of logging on a NAT. # Configure logging on this NAT.
"enable": True or False, # Indicates whether or not to export logs. This is false by default.
"filter": "A String", # Specify the desired filtering of logs on this NAT. If unspecified, logs are exported for all connections handled by this NAT. This option can take one of the following values: - ERRORS_ONLY: Export logs only for connection failures. - TRANSLATIONS_ONLY: Export logs only for successful connections. - ALL: Export logs for all connections, successful and unsuccessful.
},
"maxPortsPerVm": 42, # Maximum number of ports allocated to a VM from this NAT config when Dynamic Port Allocation is enabled. If Dynamic Port Allocation is not enabled, this field has no effect. If Dynamic Port Allocation is enabled, and this field is set, it must be set to a power of two greater than minPortsPerVm, or 64 if minPortsPerVm is not set. If Dynamic Port Allocation is enabled and this field is not set, a maximum of 65536 ports will be allocated to a VM from this NAT config.
"minPortsPerVm": 42, # Minimum number of ports allocated to a VM from this NAT config. If not set, a default number of ports is allocated to a VM. This is rounded up to the nearest power of 2. For example, if the value of this field is 50, at least 64 ports are allocated to a VM.
"name": "A String", # Unique name of this Nat service. The name must be 1-63 characters long and comply with RFC1035.
"natIpAllocateOption": "A String", # Specify the NatIpAllocateOption, which can take one of the following values: - MANUAL_ONLY: Uses only Nat IP addresses provided by customers. When there are not enough specified Nat IPs, the Nat service fails for new VMs. - AUTO_ONLY: Nat IPs are allocated by Google Cloud Platform; customers can't specify any Nat IPs. When choosing AUTO_ONLY, then nat_ip should be empty.
"natIps": [ # A list of URLs of the IP resources used for this Nat service. These IP addresses must be valid static external IP addresses assigned to the project.
"A String",
],
"rules": [ # A list of rules associated with this NAT.
{
"action": { # The action to be enforced for traffic that matches this rule.
"sourceNatActiveIps": [ # A list of URLs of the IP resources used for this NAT rule. These IP addresses must be valid static external IP addresses assigned to the project. This field is used for public NAT.
"A String",
],
"sourceNatActiveRanges": [ # A list of URLs of the subnetworks used as source ranges for this NAT Rule. These subnetworks must have purpose set to PRIVATE_NAT. This field is used for private NAT.
"A String",
],
"sourceNatDrainIps": [ # A list of URLs of the IP resources to be drained. These IPs must be valid static external IPs that have been assigned to the NAT. These IPs should be used for updating/patching a NAT rule only. This field is used for public NAT.
"A String",
],
"sourceNatDrainRanges": [ # A list of URLs of subnetworks representing source ranges to be drained. This is only supported on patch/update, and these subnetworks must have previously been used as active ranges in this NAT Rule. This field is used for private NAT.
"A String",
],
},
"description": "A String", # An optional description of this rule.
"match": "A String", # CEL expression that specifies the match condition that egress traffic from a VM is evaluated against. If it evaluates to true, the corresponding `action` is enforced. The following examples are valid match expressions for public NAT: `inIpRange(destination.ip, '1.1.0.0/16') || inIpRange(destination.ip, '2.2.0.0/16')` `destination.ip == '1.1.0.1' || destination.ip == '8.8.8.8'` The following example is a valid match expression for private NAT: `nexthop.hub == '//networkconnectivity.googleapis.com/projects/my-project/locations/global/hubs/hub-1'`
"ruleNumber": 42, # An integer uniquely identifying a rule in the list. The rule number must be a positive value between 0 and 65000, and must be unique among rules within a NAT.
},
],
"sourceSubnetworkIpRangesToNat": "A String", # Specify the Nat option, which can take one of the following values: - ALL_SUBNETWORKS_ALL_IP_RANGES: All of the IP ranges in every Subnetwork are allowed to Nat. - ALL_SUBNETWORKS_ALL_PRIMARY_IP_RANGES: All of the primary IP ranges in every Subnetwork are allowed to Nat. - LIST_OF_SUBNETWORKS: A list of Subnetworks are allowed to Nat (specified in the field subnetwork below) The default is SUBNETWORK_IP_RANGE_TO_NAT_OPTION_UNSPECIFIED. Note that if this field contains ALL_SUBNETWORKS_ALL_IP_RANGES then there should not be any other Router.Nat section in any Router for this network in this region.
"subnetworks": [ # A list of Subnetwork resources whose traffic should be translated by NAT Gateway. It is used only when LIST_OF_SUBNETWORKS is selected for the SubnetworkIpRangeToNatOption above.
{ # Defines the IP ranges that want to use NAT for a subnetwork.
"name": "A String", # URL for the subnetwork resource that will use NAT.
"secondaryIpRangeNames": [ # A list of the secondary ranges of the Subnetwork that are allowed to use NAT. This can be populated only if "LIST_OF_SECONDARY_IP_RANGES" is one of the values in source_ip_ranges_to_nat.
"A String",
],
"sourceIpRangesToNat": [ # Specify the options for NAT ranges in the Subnetwork. All options of a single value are valid except NAT_IP_RANGE_OPTION_UNSPECIFIED. The only valid option with multiple values is: ["PRIMARY_IP_RANGE", "LIST_OF_SECONDARY_IP_RANGES"] Default: [ALL_IP_RANGES]
"A String",
],
},
],
"tcpEstablishedIdleTimeoutSec": 42, # Timeout (in seconds) for TCP established connections. Defaults to 1200s if not set.
"tcpTimeWaitTimeoutSec": 42, # Timeout (in seconds) for TCP connections that are in TIME_WAIT state. Defaults to 120s if not set.
"tcpTransitoryIdleTimeoutSec": 42, # Timeout (in seconds) for TCP transitory connections. Defaults to 30s if not set.
"type": "A String", # Indicates whether this NAT is used for public or private IP translation. If unspecified, it defaults to PUBLIC.
"udpIdleTimeoutSec": 42, # Timeout (in seconds) for UDP connections. Defaults to 30s if not set.
},
],
"network": "A String", # URI of the network to which this router belongs.
"region": "A String", # [Output Only] URI of the region where the router resides. You must specify this field as part of the HTTP request URL. It is not settable as a field in the request body.
"selfLink": "A String", # [Output Only] Server-defined URL for the resource.
},
}

testIamPermissions(project, region, resource, body=None, x__xgafv=None)

Returns permissions that a caller has on the specified resource.

Args:
  project: string, Project ID for this request. (required)
  region: string, The name of the region for this request. (required)
  resource: string, Name or id of the resource for this request. (required)
  body: object, The request body.
    The object takes the form of:

{
  "permissions": [ # The set of permissions to check for the 'resource'. Permissions with wildcards (such as '*' or 'storage.*') are not allowed.
    "A String",
  ],
}

  x__xgafv: string, V1 error format.
    Allowed values
      1 - v1 error format
      2 - v2 error format

Returns:
  An object of the form:

    {
  "permissions": [ # A subset of `TestPermissionsRequest.permissions` that the caller is allowed.
    "A String",
  ],
}

update(project, region, router, body=None, requestId=None, x__xgafv=None)

Updates the specified Router resource with the data included in the request. This method conforms to PUT semantics, which requests that the state of the target resource be created or replaced with the state defined by the representation enclosed in the request message payload.

Args:
project: string, Project ID for this request. (required)
region: string, Name of the region for this request. (required)
router: string, Name of the Router resource to update. (required)
body: object, The request body.
The object takes the form of:

{ # Represents a Cloud Router resource. For more information about Cloud Router, read the Cloud Router overview.
"bgp": { # BGP information specific to this router.
"advertiseMode": "A String", # User-specified flag to indicate which mode to use for advertisement. The options are DEFAULT or CUSTOM.
"advertisedGroups": [ # User-specified list of prefix groups to advertise in custom mode. This field can only be populated if advertise_mode is CUSTOM and is advertised to all peers of the router. These groups will be advertised in addition to any specified prefixes. Leave this field blank to advertise no custom groups.
"A String",
],
"advertisedIpRanges": [ # User-specified list of individual IP ranges to advertise in custom mode. This field can only be populated if advertise_mode is CUSTOM and is advertised to all peers of the router. These IP ranges will be advertised in addition to any specified groups. Leave this field blank to advertise no custom IP ranges.
{ # Description-tagged IP ranges for the router to advertise.
"description": "A String", # User-specified description for the IP range.
"range": "A String", # The IP range to advertise. The value must be a CIDR-formatted string.
},
],
"asn": 42, # Local BGP Autonomous System Number (ASN). Must be an RFC6996 private ASN, either 16-bit or 32-bit. The value will be fixed for this router resource. All VPN tunnels that link to this router will have the same local ASN.
"identifierRange": "A String", # Explicitly specifies a range of valid BGP Identifiers for this Router. It is provided as a link-local IPv4 range (from 169.254.0.0/16), of size at least /30, even if the BGP sessions are over IPv6. It must not overlap with any IPv4 BGP session ranges. Other vendors commonly call this "router ID".
"keepaliveInterval": 42, # The interval in seconds between BGP keepalive messages that are sent to the peer. Hold time is three times the interval at which keepalive messages are sent, and the hold time is the maximum number of seconds allowed to elapse between successive keepalive messages that BGP receives from a peer. BGP will use the smaller of either the local hold time value or the peer's hold time value as the hold time for the BGP connection between the two peers. If set, this value must be between 20 and 60. The default is 20.
},
"bgpPeers": [ # BGP information that must be configured into the routing stack to establish BGP peering. This information must specify the peer ASN and either the interface name, IP address, or peer IP address. Please refer to RFC4273.
{
"advertiseMode": "A String", # User-specified flag to indicate which mode to use for advertisement.
"advertisedGroups": [ # User-specified list of prefix groups to advertise in custom mode, which currently supports the following option: - ALL_SUBNETS: Advertises all of the router's own VPC subnets. This excludes any routes learned for subnets that use VPC Network Peering. Note that this field can only be populated if advertise_mode is CUSTOM and overrides the list defined for the router (in the "bgp" message). These groups are advertised in addition to any specified prefixes. Leave this field blank to advertise no custom groups.
"A String",
],
"advertisedIpRanges": [ # User-specified list of individual IP ranges to advertise in custom mode. This field can only be populated if advertise_mode is CUSTOM and overrides the list defined for the router (in the "bgp" message). These IP ranges are advertised in addition to any specified groups. Leave this field blank to advertise no custom IP ranges.
{ # Description-tagged IP ranges for the router to advertise.
"description": "A String", # User-specified description for the IP range.
"range": "A String", # The IP range to advertise. The value must be a CIDR-formatted string.
},
],
"advertisedRoutePriority": 42, # The priority of routes advertised to this BGP peer. Where there is more than one matching route of maximum length, the routes with the lowest priority value win.
"bfd": { # BFD configuration for the BGP peering.
"minReceiveInterval": 42, # The minimum interval, in milliseconds, between BFD control packets received from the peer router. The actual value is negotiated between the two routers and is equal to the greater of this value and the transmit interval of the other router. If set, this value must be between 1000 and 30000. The default is 1000.
"minTransmitInterval": 42, # The minimum interval, in milliseconds, between BFD control packets transmitted to the peer router. The actual value is negotiated between the two routers and is equal to the greater of this value and the corresponding receive interval of the other router. If set, this value must be between 1000 and 30000. The default is 1000.
"multiplier": 42, # The number of consecutive BFD packets that must be missed before BFD declares that a peer is unavailable. If set, the value must be a value between 5 and 16. The default is 5.
"sessionInitializationMode": "A String", # The BFD session initialization mode for this BGP peer. If set to ACTIVE, the Cloud Router will initiate the BFD session for this BGP peer. If set to PASSIVE, the Cloud Router will wait for the peer router to initiate the BFD session for this BGP peer. If set to DISABLED, BFD is disabled for this BGP peer. The default is DISABLED.
},
"customLearnedIpRanges": [ # A list of user-defined custom learned route IP address ranges for a BGP session.
{
"range": "A String", # The custom learned route IP address range. Must be a valid CIDR-formatted prefix. If an IP address is provided without a subnet mask, it is interpreted as, for IPv4, a `/32` singular IP address range, and, for IPv6, `/128`.
},
],
"customLearnedRoutePriority": 42, # The user-defined custom learned route priority for a BGP session. This value is applied to all custom learned route ranges for the session. You can choose a value from `0` to `65335`. If you don't provide a value, Google Cloud assigns a priority of `100` to the ranges.
"enable": "A String", # The status of the BGP peer connection. If set to FALSE, any active session with the peer is terminated and all associated routing information is removed. If set to TRUE, the peer connection can be established with routing information. The default is TRUE.
"enableIpv4": True or False, # Enable IPv4 traffic over BGP Peer. It is enabled by default if the peerIpAddress is version 4.
"enableIpv6": True or False, # Enable IPv6 traffic over BGP Peer. It is enabled by default if the peerIpAddress is version 6.
"exportPolicies": [ # List of export policies applied to this peer, in the order they must be evaluated. The name must correspond to an existing policy that has ROUTE_POLICY_TYPE_EXPORT type. Note that Route Policies are currently available in preview. Please use Beta API to use Route Policies.
"A String",
],
"importPolicies": [ # List of import policies applied to this peer, in the order they must be evaluated. The name must correspond to an existing policy that has ROUTE_POLICY_TYPE_IMPORT type. Note that Route Policies are currently available in preview. Please use Beta API to use Route Policies.
"A String",
],
"interfaceName": "A String", # Name of the interface the BGP peer is associated with.
"ipAddress": "A String", # IP address of the interface inside Google Cloud Platform.
"ipv4NexthopAddress": "A String", # IPv4 address of the interface inside Google Cloud Platform.
"ipv6NexthopAddress": "A String", # IPv6 address of the interface inside Google Cloud Platform.
"managementType": "A String", # [Output Only] The resource that configures and manages this BGP peer. - MANAGED_BY_USER is the default value and can be managed by you or other users - MANAGED_BY_ATTACHMENT is a BGP peer that is configured and managed by Cloud Interconnect, specifically by an InterconnectAttachment of type PARTNER. Google automatically creates, updates, and deletes this type of BGP peer when the PARTNER InterconnectAttachment is created, updated, or deleted.
"md5AuthenticationKeyName": "A String", # Present if MD5 authentication is enabled for the peering. Must be the name of one of the entries in the Router.md5_authentication_keys. The field must comply with RFC1035.
"name": "A String", # Name of this BGP peer. The name must be 1-63 characters long, and comply with RFC1035. Specifically, the name must be 1-63 characters long and match the regular expression `[a-z]([-a-z0-9]*[a-z0-9])?` which means the first character must be a lowercase letter, and all following characters must be a dash, lowercase letter, or digit, except the last character, which cannot be a dash.
"peerAsn": 42, # Peer BGP Autonomous System Number (ASN). Each BGP interface may use a different value.
"peerIpAddress": "A String", # IP address of the BGP interface outside Google Cloud Platform.
"peerIpv4NexthopAddress": "A String", # IPv4 address of the BGP interface outside Google Cloud Platform.
"peerIpv6NexthopAddress": "A String", # IPv6 address of the BGP interface outside Google Cloud Platform.
"routerApplianceInstance": "A String", # URI of the VM instance that is used as third-party router appliances such as Next Gen Firewalls, Virtual Routers, or Router Appliances. The VM instance must be located in zones contained in the same region as this Cloud Router. The VM instance is the peer side of the BGP session.
},
],
"creationTimestamp": "A String", # [Output Only] Creation timestamp in RFC3339 text format.
"description": "A String", # An optional description of this resource. Provide this property when you create the resource.
"encryptedInterconnectRouter": True or False, # Indicates if a router is dedicated for use with encrypted VLAN attachments (interconnectAttachments).
"id": "A String", # [Output Only] The unique identifier for the resource. This identifier is defined by the server.
"interfaces": [ # Router interfaces. To create a BGP peer that uses a router interface, the interface must have one of the following fields specified: - linkedVpnTunnel - linkedInterconnectAttachment - subnetwork You can create a router interface without any of these fields specified. However, you cannot create a BGP peer that uses that interface.
{
"ipRange": "A String", # IP address and range of the interface. - For Internet Protocol version 4 (IPv4), the IP range must be in the RFC3927 link-local IP address space. The value must be a CIDR-formatted string, for example, 169.254.0.1/30. Note: Do not truncate the IP address, as it represents the IP address of the interface. - For Internet Protocol version 6 (IPv6), the value must be a unique local address (ULA) range from fdff:1::/64 with a mask length of 126 or less. This value should be a CIDR-formatted string, for example, fc00:0:1:1::1/112. Within the router's VPC, this IPv6 prefix will be reserved exclusively for this connection and cannot be used for any other purpose.
"ipVersion": "A String", # IP version of this interface.
"linkedInterconnectAttachment": "A String", # URI of the linked Interconnect attachment. It must be in the same region as the router. Each interface can have one linked resource, which can be a VPN tunnel, an Interconnect attachment, or a subnetwork.
"linkedVpnTunnel": "A String", # URI of the linked VPN tunnel, which must be in the same region as the router. Each interface can have one linked resource, which can be a VPN tunnel, an Interconnect attachment, or a subnetwork.
"managementType": "A String", # [Output Only] The resource that configures and manages this interface. - MANAGED_BY_USER is the default value and can be managed directly by users. - MANAGED_BY_ATTACHMENT is an interface that is configured and managed by Cloud Interconnect, specifically, by an InterconnectAttachment of type PARTNER. Google automatically creates, updates, and deletes this type of interface when the PARTNER InterconnectAttachment is created, updated, or deleted.
"name": "A String", # Name of this interface entry. The name must be 1-63 characters long, and comply with RFC1035. Specifically, the name must be 1-63 characters long and match the regular expression `[a-z]([-a-z0-9]*[a-z0-9])?` which means the first character must be a lowercase letter, and all following characters must be a dash, lowercase letter, or digit, except the last character, which cannot be a dash.
"privateIpAddress": "A String", # The regional private internal IP address that is used to establish BGP sessions to a VM instance acting as a third-party Router Appliance, such as a Next Gen Firewall, a Virtual Router, or an SD-WAN VM.
"redundantInterface": "A String", # Name of the interface that will be redundant with the current interface you are creating. The redundantInterface must belong to the same Cloud Router as the interface here. To establish the BGP session to a Router Appliance VM, you must create two BGP peers. The two BGP peers must be attached to two separate interfaces that are redundant with each other. The redundant_interface must be 1-63 characters long, and comply with RFC1035. Specifically, the redundant_interface must be 1-63 characters long and match the regular expression `[a-z]([-a-z0-9]*[a-z0-9])?` which means the first character must be a lowercase letter, and all following characters must be a dash, lowercase letter, or digit, except the last character, which cannot be a dash.
"subnetwork": "A String", # The URI of the subnetwork resource that this interface belongs to, which must be in the same region as the Cloud Router. When you establish a BGP session to a VM instance using this interface, the VM instance must belong to the same subnetwork as the subnetwork specified here.
},
],
"kind": "compute#router", # [Output Only] Type of resource. Always compute#router for routers.
"md5AuthenticationKeys": [ # Keys used for MD5 authentication.
{
"key": "A String", # [Input only] Value of the key. For patch and update calls, it can be skipped to copy the value from the previous configuration. This is allowed if the key with the same name existed before the operation. Maximum length is 80 characters. Can only contain printable ASCII characters.
"name": "A String", # Name used to identify the key. Must be unique within a router. Must be referenced by exactly one bgpPeer. Must comply with RFC1035.
},
],
"name": "A String", # Name of the resource. Provided by the client when the resource is created. The name must be 1-63 characters long, and comply with RFC1035. Specifically, the name must be 1-63 characters long and match the regular expression `[a-z]([-a-z0-9]*[a-z0-9])?` which means the first character must be a lowercase letter, and all following characters must be a dash, lowercase letter, or digit, except the last character, which cannot be a dash.
"nats": [ # A list of NAT services created in this router.
{ # Represents a Nat resource. It enables the VMs within the specified subnetworks to access Internet without external IP addresses. It specifies a list of subnetworks (and the ranges within) that want to use NAT. Customers can also provide the external IPs that would be used for NAT. GCP would auto-allocate ephemeral IPs if no external IPs are provided.
"autoNetworkTier": "A String", # The network tier to use when automatically reserving NAT IP addresses. Must be one of: PREMIUM, STANDARD. If not specified, then the current project-level default tier is used.
"drainNatIps": [ # A list of URLs of the IP resources to be drained. These IPs must be valid static external IPs that have been assigned to the NAT. These IPs should be used for updating/patching a NAT only.
"A String",
],
"enableDynamicPortAllocation": True or False, # Enable Dynamic Port Allocation. If not specified, it is disabled by default. If set to true, - Dynamic Port Allocation will be enabled on this NAT config. - enableEndpointIndependentMapping cannot be set to true. - If minPorts is set, minPortsPerVm must be set to a power of two greater than or equal to 32. If minPortsPerVm is not set, a minimum of 32 ports will be allocated to a VM from this NAT config.
"enableEndpointIndependentMapping": True or False,
"endpointTypes": [ # List of NAT-ted endpoint types supported by the Nat Gateway. If the list is empty, then it will be equivalent to include ENDPOINT_TYPE_VM
"A String",
],
"icmpIdleTimeoutSec": 42, # Timeout (in seconds) for ICMP connections. Defaults to 30s if not set.
"logConfig": { # Configuration of logging on a NAT. # Configure logging on this NAT.
"enable": True or False, # Indicates whether or not to export logs. This is false by default.
"filter": "A String", # Specify the desired filtering of logs on this NAT. If unspecified, logs are exported for all connections handled by this NAT. This option can take one of the following values: - ERRORS_ONLY: Export logs only for connection failures. - TRANSLATIONS_ONLY: Export logs only for successful connections. - ALL: Export logs for all connections, successful and unsuccessful.
},
"maxPortsPerVm": 42, # Maximum number of ports allocated to a VM from this NAT config when Dynamic Port Allocation is enabled. If Dynamic Port Allocation is not enabled, this field has no effect. If Dynamic Port Allocation is enabled, and this field is set, it must be set to a power of two greater than minPortsPerVm, or 64 if minPortsPerVm is not set. If Dynamic Port Allocation is enabled and this field is not set, a maximum of 65536 ports will be allocated to a VM from this NAT config.
"minPortsPerVm": 42, # Minimum number of ports allocated to a VM from this NAT config. If not set, a default number of ports is allocated to a VM. This is rounded up to the nearest power of 2. For example, if the value of this field is 50, at least 64 ports are allocated to a VM.
"name": "A String", # Unique name of this Nat service. The name must be 1-63 characters long and comply with RFC1035.
"natIpAllocateOption": "A String", # Specify the NatIpAllocateOption, which can take one of the following values: - MANUAL_ONLY: Uses only Nat IP addresses provided by customers. When there are not enough specified Nat IPs, the Nat service fails for new VMs. - AUTO_ONLY: Nat IPs are allocated by Google Cloud Platform; customers can't specify any Nat IPs. When choosing AUTO_ONLY, then nat_ip should be empty.
"natIps": [ # A list of URLs of the IP resources used for this Nat service. These IP addresses must be valid static external IP addresses assigned to the project.
"A String",
],
"rules": [ # A list of rules associated with this NAT.
{
"action": { # The action to be enforced for traffic that matches this rule.
"sourceNatActiveIps": [ # A list of URLs of the IP resources used for this NAT rule. These IP addresses must be valid static external IP addresses assigned to the project. This field is used for public NAT.
"A String",
],
"sourceNatActiveRanges": [ # A list of URLs of the subnetworks used as source ranges for this NAT Rule. These subnetworks must have purpose set to PRIVATE_NAT. This field is used for private NAT.
"A String",
],
"sourceNatDrainIps": [ # A list of URLs of the IP resources to be drained. These IPs must be valid static external IPs that have been assigned to the NAT. These IPs should be used for updating/patching a NAT rule only. This field is used for public NAT.
"A String",
],
"sourceNatDrainRanges": [ # A list of URLs of subnetworks representing source ranges to be drained. This is only supported on patch/update, and these subnetworks must have previously been used as active ranges in this NAT Rule. This field is used for private NAT.
"A String",
],
},
"description": "A String", # An optional description of this rule.
"match": "A String", # CEL expression that specifies the match condition that egress traffic from a VM is evaluated against. If it evaluates to true, the corresponding `action` is enforced. The following examples are valid match expressions for public NAT: `inIpRange(destination.ip, '1.1.0.0/16') || inIpRange(destination.ip, '2.2.0.0/16')` `destination.ip == '1.1.0.1' || destination.ip == '8.8.8.8'` The following example is a valid match expression for private NAT: `nexthop.hub == '//networkconnectivity.googleapis.com/projects/my-project/locations/global/hubs/hub-1'`
"ruleNumber": 42, # An integer uniquely identifying a rule in the list. The rule number must be a positive value between 0 and 65000, and must be unique among rules within a NAT.
},
],
"sourceSubnetworkIpRangesToNat": "A String", # Specify the Nat option, which can take one of the following values: - ALL_SUBNETWORKS_ALL_IP_RANGES: All of the IP ranges in every Subnetwork are allowed to Nat. - ALL_SUBNETWORKS_ALL_PRIMARY_IP_RANGES: All of the primary IP ranges in every Subnetwork are allowed to Nat. - LIST_OF_SUBNETWORKS: A list of Subnetworks are allowed to Nat (specified in the field subnetwork below) The default is SUBNETWORK_IP_RANGE_TO_NAT_OPTION_UNSPECIFIED. Note that if this field contains ALL_SUBNETWORKS_ALL_IP_RANGES then there should not be any other Router.Nat section in any Router for this network in this region.
"subnetworks": [ # A list of Subnetwork resources whose traffic should be translated by NAT Gateway. It is used only when LIST_OF_SUBNETWORKS is selected for the SubnetworkIpRangeToNatOption above.
{ # Defines the IP ranges that want to use NAT for a subnetwork.
"name": "A String", # URL for the subnetwork resource that will use NAT.
"secondaryIpRangeNames": [ # A list of the secondary ranges of the Subnetwork that are allowed to use NAT. This can be populated only if "LIST_OF_SECONDARY_IP_RANGES" is one of the values in source_ip_ranges_to_nat.
"A String",
],
"sourceIpRangesToNat": [ # Specify the options for NAT ranges in the Subnetwork. All options of a single value are valid except NAT_IP_RANGE_OPTION_UNSPECIFIED. The only valid option with multiple values is: ["PRIMARY_IP_RANGE", "LIST_OF_SECONDARY_IP_RANGES"] Default: [ALL_IP_RANGES]
"A String",
],
},
],
"tcpEstablishedIdleTimeoutSec": 42, # Timeout (in seconds) for TCP established connections. Defaults to 1200s if not set.
"tcpTimeWaitTimeoutSec": 42, # Timeout (in seconds) for TCP connections that are in TIME_WAIT state. Defaults to 120s if not set.
"tcpTransitoryIdleTimeoutSec": 42, # Timeout (in seconds) for TCP transitory connections. Defaults to 30s if not set.
"type": "A String", # Indicates whether this NAT is used for public or private IP translation. If unspecified, it defaults to PUBLIC.
"udpIdleTimeoutSec": 42, # Timeout (in seconds) for UDP connections. Defaults to 30s if not set.
},
],
"network": "A String", # URI of the network to which this router belongs.
"region": "A String", # [Output Only] URI of the region where the router resides. You must specify this field as part of the HTTP request URL. It is not settable as a field in the request body.
"selfLink": "A String", # [Output Only] Server-defined URL for the resource.
}

requestId: string, An optional request ID to identify requests. Specify a unique request ID so that if you must retry your request, the server will know to ignore the request if it has already been completed. For example, consider a situation where you make an initial request and the request times out. If you make the request again with the same request ID, the server can check if original operation with the same request ID was received, and if so, will ignore the second request. This prevents clients from accidentally creating duplicate commitments. The request ID must be a valid UUID with the exception that zero UUID is not supported ( 00000000-0000-0000-0000-000000000000).
x__xgafv: string, V1 error format.
Allowed values
1 - v1 error format
2 - v2 error format

Returns:
An object of the form:

{ # Represents an Operation resource. Google Compute Engine has three Operation resources: * [Global](/compute/docs/reference/rest/beta/globalOperations) * [Regional](/compute/docs/reference/rest/beta/regionOperations) * [Zonal](/compute/docs/reference/rest/beta/zoneOperations) You can use an operation resource to manage asynchronous API requests. For more information, read Handling API responses. Operations can be global, regional or zonal. - For global operations, use the `globalOperations` resource. - For regional operations, use the `regionOperations` resource. - For zonal operations, use the `zoneOperations` resource. For more information, read Global, Regional, and Zonal Resources. Note that completed Operation resources have a limited retention period.
"clientOperationId": "A String", # [Output Only] The value of `requestId` if you provided it in the request. Not present otherwise.
"creationTimestamp": "A String", # [Deprecated] This field is deprecated.
"description": "A String", # [Output Only] A textual description of the operation, which is set when the operation is created.
"endTime": "A String", # [Output Only] The time that this operation was completed. This value is in RFC3339 text format.
"error": { # [Output Only] If errors are generated during processing of the operation, this field will be populated.
"errors": [ # [Output Only] The array of errors encountered while processing this operation.
{
"code": "A String", # [Output Only] The error type identifier for this error.
"errorDetails": [ # [Output Only] An optional list of messages that contain the error details. There is a set of defined message types to use for providing details.The syntax depends on the error code. For example, QuotaExceededInfo will have details when the error code is QUOTA_EXCEEDED.
{
"errorInfo": { # Describes the cause of the error with structured details. Example of an error when contacting the "pubsub.googleapis.com" API when it is not enabled: { "reason": "API_DISABLED" "domain": "googleapis.com" "metadata": { "resource": "projects/123", "service": "pubsub.googleapis.com" } } This response indicates that the pubsub.googleapis.com API is not enabled. Example of an error that is returned when attempting to create a Spanner instance in a region that is out of stock: { "reason": "STOCKOUT" "domain": "spanner.googleapis.com", "metadata": { "availableRegions": "us-central1,us-east2" } }
"domain": "A String", # The logical grouping to which the "reason" belongs. The error domain is typically the registered service name of the tool or product that generates the error. Example: "pubsub.googleapis.com". If the error is generated by some common infrastructure, the error domain must be a globally unique value that identifies the infrastructure. For Google API infrastructure, the error domain is "googleapis.com".
"metadatas": { # Additional structured details about this error. Keys must match /a-z+/ but should ideally be lowerCamelCase. Also they must be limited to 64 characters in length. When identifying the current value of an exceeded limit, the units should be contained in the key, not the value. For example, rather than {"instanceLimit": "100/request"}, should be returned as, {"instanceLimitPerRequest": "100"}, if the client exceeds the number of instances that can be created in a single (batch) request.
"a_key": "A String",
},
"reason": "A String", # The reason of the error. This is a constant value that identifies the proximate cause of the error. Error reasons are unique within a particular domain of errors. This should be at most 63 characters and match a regular expression of `A-Z+[A-Z0-9]`, which represents UPPER_SNAKE_CASE.
},
"help": { # Provides links to documentation or for performing an out of band action. For example, if a quota check failed with an error indicating the calling project hasn't enabled the accessed service, this can contain a URL pointing directly to the right place in the developer console to flip the bit.
"links": [ # URL(s) pointing to additional information on handling the current error.
{ # Describes a URL link.
"description": "A String", # Describes what the link offers.
"url": "A String", # The URL of the link.
},
],
},
"localizedMessage": { # Provides a localized error message that is safe to return to the user which can be attached to an RPC error.
"locale": "A String", # The locale used following the specification defined at https://www.rfc-editor.org/rfc/bcp/bcp47.txt. Examples are: "en-US", "fr-CH", "es-MX"
"message": "A String", # The localized error message in the above locale.
},
"quotaInfo": { # Additional details for quota exceeded error for resource quota.
"dimensions": { # The map holding related quota dimensions.
"a_key": "A String",
},
"futureLimit": 3.14, # Future quota limit being rolled out. The limit's unit depends on the quota type or metric.
"limit": 3.14, # Current effective quota limit. The limit's unit depends on the quota type or metric.
"limitName": "A String", # The name of the quota limit.
"metricName": "A String", # The Compute Engine quota metric name.
"rolloutStatus": "A String", # Rollout status of the future quota limit.
},
},
],
"location": "A String", # [Output Only] Indicates the field in the request that caused the error. This property is optional.
"message": "A String", # [Output Only] An optional, human-readable error message.
},
],
},
"httpErrorMessage": "A String", # [Output Only] If the operation fails, this field contains the HTTP error message that was returned, such as `NOT FOUND`.
"httpErrorStatusCode": 42, # [Output Only] If the operation fails, this field contains the HTTP error status code that was returned. For example, a `404` means the resource was not found.
"id": "A String", # [Output Only] The unique identifier for the operation. This identifier is defined by the server.
"insertTime": "A String", # [Output Only] The time that this operation was requested. This value is in RFC3339 text format.
"instancesBulkInsertOperationMetadata": {
"perLocationStatus": { # Status information per location (location name is key). Example key: zones/us-central1-a
"a_key": {
"createdVmCount": 42, # [Output Only] Count of VMs successfully created so far.
"deletedVmCount": 42, # [Output Only] Count of VMs that got deleted during rollback.
"failedToCreateVmCount": 42, # [Output Only] Count of VMs that started creating but encountered an error.
"status": "A String", # [Output Only] Creation status of BulkInsert operation - information if the flow is rolling forward or rolling back.
"targetVmCount": 42, # [Output Only] Count of VMs originally planned to be created.
},
},
},
"kind": "compute#operation", # [Output Only] Type of the resource. Always `compute#operation` for Operation resources.
"name": "A String", # [Output Only] Name of the operation.
"operationGroupId": "A String", # [Output Only] An ID that represents a group of operations, such as when a group of operations results from a `bulkInsert` API request.
"operationType": "A String", # [Output Only] The type of operation, such as `insert`, `update`, or `delete`, and so on.
"progress": 42, # [Output Only] An optional progress indicator that ranges from 0 to 100. There is no requirement that this be linear or support any granularity of operations. This should not be used to guess when the operation will be complete. This number should monotonically increase as the operation progresses.
"region": "A String", # [Output Only] The URL of the region where the operation resides. Only applicable when performing regional operations.
"selfLink": "A String", # [Output Only] Server-defined URL for the resource.
"setCommonInstanceMetadataOperationMetadata": { # [Output Only] If the operation is for projects.setCommonInstanceMetadata, this field will contain information on all underlying zonal actions and their state.
"clientOperationId": "A String", # [Output Only] The client operation id.
"perLocationOperations": { # [Output Only] Status information per location (location name is key). Example key: zones/us-central1-a
"a_key": {
"error": { # The `Status` type defines a logical error model that is suitable for different programming environments, including REST APIs and RPC APIs. It is used by [gRPC](https://github.com/grpc). Each `Status` message contains three pieces of data: error code, error message, and error details. You can find out more about this error model and how to work with it in the [API Design Guide](https://cloud.google.com/apis/design/errors). # [Output Only] If state is `ABANDONED` or `FAILED`, this field is populated.
"code": 42, # The status code, which should be an enum value of google.rpc.Code.
"details": [ # A list of messages that carry the error details. There is a common set of message types for APIs to use.
{
"a_key": "", # Properties of the object. Contains field @type with type URL.
},
],
"message": "A String", # A developer-facing error message, which should be in English. Any user-facing error message should be localized and sent in the google.rpc.Status.details field, or localized by the client.
},
"state": "A String", # [Output Only] Status of the action, which can be one of the following: `PROPAGATING`, `PROPAGATED`, `ABANDONED`, `FAILED`, or `DONE`.
},
},
},
"startTime": "A String", # [Output Only] The time that this operation was started by the server. This value is in RFC3339 text format.
"status": "A String", # [Output Only] The status of the operation, which can be one of the following: `PENDING`, `RUNNING`, or `DONE`.
"statusMessage": "A String", # [Output Only] An optional textual description of the current status of the operation.
"targetId": "A String", # [Output Only] The unique target ID, which identifies a specific incarnation of the target resource.
"targetLink": "A String", # [Output Only] The URL of the resource that the operation modifies. For operations related to creating a snapshot, this points to the disk that the snapshot was created from.
"user": "A String", # [Output Only] User who requested the operation, for example: `user@example.com` or `alice_smith_identifier (global/workforcePools/example-com-us-employees)`.
"warnings": [ # [Output Only] If warning messages are generated during processing of the operation, this field will be populated.
{
"code": "A String", # [Output Only] A warning code, if applicable. For example, Compute Engine returns NO_RESULTS_ON_PAGE if there are no results in the response.
"data": [ # [Output Only] Metadata about this warning in key: value format. For example: "data": [ { "key": "scope", "value": "zones/us-east1-d" }
{
"key": "A String", # [Output Only] A key that provides more detail on the warning being returned. For example, for warnings where there are no results in a list request for a particular zone, this key might be scope and the key value might be the zone name. Other examples might be a key indicating a deprecated resource and a suggested replacement, or a warning about invalid network settings (for example, if an instance attempts to perform IP forwarding but is not enabled for IP forwarding).
"value": "A String", # [Output Only] A warning data value corresponding to the key.
},
],
"message": "A String", # [Output Only] A human-readable description of the warning code.
},
],
"zone": "A String", # [Output Only] The URL of the zone where the operation resides. Only applicable when performing per-zone operations.
}

updateRoutePolicy(project, region, router, body=None, requestId=None, x__xgafv=None)

Updates or creates new Route Policy

Args:
  project: string, Project ID for this request. (required)
  region: string, Name of the region for this request. (required)
  router: string, Name of the Router resource where Route Policy is defined. (required)
  body: object, The request body.
    The object takes the form of:

{
  "description": "A String", # An optional description of route policy.
  "fingerprint": "A String", # A fingerprint for the Route Policy being applied to this Router, which is essentially a hash of the Route Policy used for optimistic locking. The fingerprint is initially generated by Compute Engine and changes after every request to modify or update Route Policy. You must always provide an up-to-date fingerprint hash in order to update or change labels. To see the latest fingerprint, make a getRoutePolicy() request to retrieve a Route Policy.
  "name": "A String", # Route Policy name, which must be a resource ID segment and unique within all the router's Route Policies. Name should conform to RFC1035.
  "terms": [ # List of terms (the order in the list is not important, they are evaluated in order of priority). Order of policies is not retained and might change when getting policy later.
    {
      "actions": [ # CEL expressions to evaluate to modify a route when this term matches.
        { # Represents a textual expression in the Common Expression Language (CEL) syntax. CEL is a C-like expression language. The syntax and semantics of CEL are documented at https://github.com/google/cel-spec. Example (Comparison): title: "Summary size limit" description: "Determines if a summary is less than 100 chars" expression: "document.summary.size() < 100" Example (Equality): title: "Requestor is owner" description: "Determines if requestor is the document owner" expression: "document.owner == request.auth.claims.email" Example (Logic): title: "Public documents" description: "Determine whether the document should be publicly visible" expression: "document.type != 'private' && document.type != 'internal'" Example (Data Manipulation): title: "Notification string" description: "Create a notification string with a timestamp." expression: "'New message received at ' + string(document.create_time)" The exact variables and functions that may be referenced within an expression are determined by the service that evaluates it. See the service documentation for additional information.
          "description": "A String", # Optional. Description of the expression. This is a longer text which describes the expression, e.g. when hovered over it in a UI.
          "expression": "A String", # Textual representation of an expression in Common Expression Language syntax.
          "location": "A String", # Optional. String indicating the location of the expression for error reporting, e.g. a file name and a position in the file.
          "title": "A String", # Optional. Title for the expression, i.e. a short string describing its purpose. This can be used e.g. in UIs which allow to enter the expression.
        },
      ],
      "match": { # Represents a textual expression in the Common Expression Language (CEL) syntax. CEL is a C-like expression language. The syntax and semantics of CEL are documented at https://github.com/google/cel-spec. Example (Comparison): title: "Summary size limit" description: "Determines if a summary is less than 100 chars" expression: "document.summary.size() < 100" Example (Equality): title: "Requestor is owner" description: "Determines if requestor is the document owner" expression: "document.owner == request.auth.claims.email" Example (Logic): title: "Public documents" description: "Determine whether the document should be publicly visible" expression: "document.type != 'private' && document.type != 'internal'" Example (Data Manipulation): title: "Notification string" description: "Create a notification string with a timestamp." expression: "'New message received at ' + string(document.create_time)" The exact variables and functions that may be referenced within an expression are determined by the service that evaluates it. See the service documentation for additional information. # CEL expression evaluated against a route to determine if this term applies. When not set, the term applies to all routes.
        "description": "A String", # Optional. Description of the expression. This is a longer text which describes the expression, e.g. when hovered over it in a UI.
        "expression": "A String", # Textual representation of an expression in Common Expression Language syntax.
        "location": "A String", # Optional. String indicating the location of the expression for error reporting, e.g. a file name and a position in the file.
        "title": "A String", # Optional. Title for the expression, i.e. a short string describing its purpose. This can be used e.g. in UIs which allow to enter the expression.
      },
      "priority": 42, # The evaluation priority for this term, which must be between 0 (inclusive) and 2^31 (exclusive), and unique within the list.
    },
  ],
  "type": "A String",
}

  requestId: string, An optional request ID to identify requests. Specify a unique request ID so that if you must retry your request, the server will know to ignore the request if it has already been completed. For example, consider a situation where you make an initial request and the request times out. If you make the request again with the same request ID, the server can check if original operation with the same request ID was received, and if so, will ignore the second request. This prevents clients from accidentally creating duplicate commitments. The request ID must be a valid UUID with the exception that zero UUID is not supported ( 00000000-0000-0000-0000-000000000000).
  x__xgafv: string, V1 error format.
    Allowed values
      1 - v1 error format
      2 - v2 error format

Returns:
  An object of the form:

    { # Represents an Operation resource. Google Compute Engine has three Operation resources: * [Global](/compute/docs/reference/rest/beta/globalOperations) * [Regional](/compute/docs/reference/rest/beta/regionOperations) * [Zonal](/compute/docs/reference/rest/beta/zoneOperations) You can use an operation resource to manage asynchronous API requests. For more information, read Handling API responses. Operations can be global, regional or zonal. - For global operations, use the `globalOperations` resource. - For regional operations, use the `regionOperations` resource. - For zonal operations, use the `zoneOperations` resource. For more information, read Global, Regional, and Zonal Resources. Note that completed Operation resources have a limited retention period.
  "clientOperationId": "A String", # [Output Only] The value of `requestId` if you provided it in the request. Not present otherwise.
  "creationTimestamp": "A String", # [Deprecated] This field is deprecated.
  "description": "A String", # [Output Only] A textual description of the operation, which is set when the operation is created.
  "endTime": "A String", # [Output Only] The time that this operation was completed. This value is in RFC3339 text format.
  "error": { # [Output Only] If errors are generated during processing of the operation, this field will be populated.
    "errors": [ # [Output Only] The array of errors encountered while processing this operation.
      {
        "code": "A String", # [Output Only] The error type identifier for this error.
        "errorDetails": [ # [Output Only] An optional list of messages that contain the error details. There is a set of defined message types to use for providing details.The syntax depends on the error code. For example, QuotaExceededInfo will have details when the error code is QUOTA_EXCEEDED.
          {
            "errorInfo": { # Describes the cause of the error with structured details. Example of an error when contacting the "pubsub.googleapis.com" API when it is not enabled: { "reason": "API_DISABLED" "domain": "googleapis.com" "metadata": { "resource": "projects/123", "service": "pubsub.googleapis.com" } } This response indicates that the pubsub.googleapis.com API is not enabled. Example of an error that is returned when attempting to create a Spanner instance in a region that is out of stock: { "reason": "STOCKOUT" "domain": "spanner.googleapis.com", "metadata": { "availableRegions": "us-central1,us-east2" } }
              "domain": "A String", # The logical grouping to which the "reason" belongs. The error domain is typically the registered service name of the tool or product that generates the error. Example: "pubsub.googleapis.com". If the error is generated by some common infrastructure, the error domain must be a globally unique value that identifies the infrastructure. For Google API infrastructure, the error domain is "googleapis.com".
              "metadatas": { # Additional structured details about this error. Keys must match /a-z+/ but should ideally be lowerCamelCase. Also they must be limited to 64 characters in length. When identifying the current value of an exceeded limit, the units should be contained in the key, not the value. For example, rather than {"instanceLimit": "100/request"}, should be returned as, {"instanceLimitPerRequest": "100"}, if the client exceeds the number of instances that can be created in a single (batch) request.
                "a_key": "A String",
              },
              "reason": "A String", # The reason of the error. This is a constant value that identifies the proximate cause of the error. Error reasons are unique within a particular domain of errors. This should be at most 63 characters and match a regular expression of `A-Z+[A-Z0-9]`, which represents UPPER_SNAKE_CASE.
            },
            "help": { # Provides links to documentation or for performing an out of band action. For example, if a quota check failed with an error indicating the calling project hasn't enabled the accessed service, this can contain a URL pointing directly to the right place in the developer console to flip the bit.
              "links": [ # URL(s) pointing to additional information on handling the current error.
                { # Describes a URL link.
                  "description": "A String", # Describes what the link offers.
                  "url": "A String", # The URL of the link.
                },
              ],
            },
            "localizedMessage": { # Provides a localized error message that is safe to return to the user which can be attached to an RPC error.
              "locale": "A String", # The locale used following the specification defined at https://www.rfc-editor.org/rfc/bcp/bcp47.txt. Examples are: "en-US", "fr-CH", "es-MX"
              "message": "A String", # The localized error message in the above locale.
            },
            "quotaInfo": { # Additional details for quota exceeded error for resource quota.
              "dimensions": { # The map holding related quota dimensions.
                "a_key": "A String",
              },
              "futureLimit": 3.14, # Future quota limit being rolled out. The limit's unit depends on the quota type or metric.
              "limit": 3.14, # Current effective quota limit. The limit's unit depends on the quota type or metric.
              "limitName": "A String", # The name of the quota limit.
              "metricName": "A String", # The Compute Engine quota metric name.
              "rolloutStatus": "A String", # Rollout status of the future quota limit.
            },
          },
        ],
        "location": "A String", # [Output Only] Indicates the field in the request that caused the error. This property is optional.
        "message": "A String", # [Output Only] An optional, human-readable error message.
      },
    ],
  },
  "httpErrorMessage": "A String", # [Output Only] If the operation fails, this field contains the HTTP error message that was returned, such as `NOT FOUND`.
  "httpErrorStatusCode": 42, # [Output Only] If the operation fails, this field contains the HTTP error status code that was returned. For example, a `404` means the resource was not found.
  "id": "A String", # [Output Only] The unique identifier for the operation. This identifier is defined by the server.
  "insertTime": "A String", # [Output Only] The time that this operation was requested. This value is in RFC3339 text format.
  "instancesBulkInsertOperationMetadata": {
    "perLocationStatus": { # Status information per location (location name is key). Example key: zones/us-central1-a
      "a_key": {
        "createdVmCount": 42, # [Output Only] Count of VMs successfully created so far.
        "deletedVmCount": 42, # [Output Only] Count of VMs that got deleted during rollback.
        "failedToCreateVmCount": 42, # [Output Only] Count of VMs that started creating but encountered an error.
        "status": "A String", # [Output Only] Creation status of BulkInsert operation - information if the flow is rolling forward or rolling back.
        "targetVmCount": 42, # [Output Only] Count of VMs originally planned to be created.
      },
    },
  },
  "kind": "compute#operation", # [Output Only] Type of the resource. Always `compute#operation` for Operation resources.
  "name": "A String", # [Output Only] Name of the operation.
  "operationGroupId": "A String", # [Output Only] An ID that represents a group of operations, such as when a group of operations results from a `bulkInsert` API request.
  "operationType": "A String", # [Output Only] The type of operation, such as `insert`, `update`, or `delete`, and so on.
  "progress": 42, # [Output Only] An optional progress indicator that ranges from 0 to 100. There is no requirement that this be linear or support any granularity of operations. This should not be used to guess when the operation will be complete. This number should monotonically increase as the operation progresses.
  "region": "A String", # [Output Only] The URL of the region where the operation resides. Only applicable when performing regional operations.
  "selfLink": "A String", # [Output Only] Server-defined URL for the resource.
  "setCommonInstanceMetadataOperationMetadata": { # [Output Only] If the operation is for projects.setCommonInstanceMetadata, this field will contain information on all underlying zonal actions and their state.
    "clientOperationId": "A String", # [Output Only] The client operation id.
    "perLocationOperations": { # [Output Only] Status information per location (location name is key). Example key: zones/us-central1-a
      "a_key": {
        "error": { # The `Status` type defines a logical error model that is suitable for different programming environments, including REST APIs and RPC APIs. It is used by [gRPC](https://github.com/grpc). Each `Status` message contains three pieces of data: error code, error message, and error details. You can find out more about this error model and how to work with it in the [API Design Guide](https://cloud.google.com/apis/design/errors). # [Output Only] If state is `ABANDONED` or `FAILED`, this field is populated.
          "code": 42, # The status code, which should be an enum value of google.rpc.Code.
          "details": [ # A list of messages that carry the error details. There is a common set of message types for APIs to use.
            {
              "a_key": "", # Properties of the object. Contains field @type with type URL.
            },
          ],
          "message": "A String", # A developer-facing error message, which should be in English. Any user-facing error message should be localized and sent in the google.rpc.Status.details field, or localized by the client.
        },
        "state": "A String", # [Output Only] Status of the action, which can be one of the following: `PROPAGATING`, `PROPAGATED`, `ABANDONED`, `FAILED`, or `DONE`.
      },
    },
  },
  "startTime": "A String", # [Output Only] The time that this operation was started by the server. This value is in RFC3339 text format.
  "status": "A String", # [Output Only] The status of the operation, which can be one of the following: `PENDING`, `RUNNING`, or `DONE`.
  "statusMessage": "A String", # [Output Only] An optional textual description of the current status of the operation.
  "targetId": "A String", # [Output Only] The unique target ID, which identifies a specific incarnation of the target resource.
  "targetLink": "A String", # [Output Only] The URL of the resource that the operation modifies. For operations related to creating a snapshot, this points to the disk that the snapshot was created from.
  "user": "A String", # [Output Only] User who requested the operation, for example: `user@example.com` or `alice_smith_identifier (global/workforcePools/example-com-us-employees)`.
  "warnings": [ # [Output Only] If warning messages are generated during processing of the operation, this field will be populated.
    {
      "code": "A String", # [Output Only] A warning code, if applicable. For example, Compute Engine returns NO_RESULTS_ON_PAGE if there are no results in the response.
      "data": [ # [Output Only] Metadata about this warning in key: value format. For example: "data": [ { "key": "scope", "value": "zones/us-east1-d" }
        {
          "key": "A String", # [Output Only] A key that provides more detail on the warning being returned. For example, for warnings where there are no results in a list request for a particular zone, this key might be scope and the key value might be the zone name. Other examples might be a key indicating a deprecated resource and a suggested replacement, or a warning about invalid network settings (for example, if an instance attempts to perform IP forwarding but is not enabled for IP forwarding).
          "value": "A String", # [Output Only] A warning data value corresponding to the key.
        },
      ],
      "message": "A String", # [Output Only] A human-readable description of the warning code.
    },
  ],
  "zone": "A String", # [Output Only] The URL of the zone where the operation resides. Only applicable when performing per-zone operations.
}

Compute Engine API . routers

Instance Methods

Method Details