addRule(project, region, securityPolicy, body=None, validateOnly=None, x__xgafv=None)
Inserts a rule into a security policy.
Close httplib2 connections.
delete(project, region, securityPolicy, requestId=None, x__xgafv=None)
Deletes the specified policy.
get(project, region, securityPolicy, x__xgafv=None)
List all of the ordered rules present in a single specified policy.
getRule(project, region, securityPolicy, priority=None, x__xgafv=None)
Gets a rule at the specified priority.
insert(project, region, body=None, requestId=None, validateOnly=None, x__xgafv=None)
Creates a new policy in the specified project using the data included in the request.
List all the policies that have been configured for the specified project and region.
Retrieves the next page of results.
patch(project, region, securityPolicy, body=None, requestId=None, updateMask=None, x__xgafv=None)
Patches the specified policy with the data included in the request. To clear fields in the policy, leave the fields empty and specify them in the updateMask. This cannot be used to be update the rules in the policy. Please use the per rule methods like addRule, patchRule, and removeRule instead.
Patches a rule at the specified priority. To clear fields in the rule, leave the fields empty and specify them in the updateMask.
removeRule(project, region, securityPolicy, priority=None, x__xgafv=None)
Deletes a rule at the specified priority.
addRule(project, region, securityPolicy, body=None, validateOnly=None, x__xgafv=None)
Inserts a rule into a security policy.
Args:
project: string, Project ID for this request. (required)
region: string, Name of the region scoping this request. (required)
securityPolicy: string, Name of the security policy to update. (required)
body: object, The request body.
The object takes the form of:
{ # Represents a rule that describes one or more match conditions along with the action to be taken when traffic matches this condition (allow or deny).
"action": "A String", # The Action to perform when the rule is matched. The following are the valid actions: - allow: allow access to target. - deny(STATUS): deny access to target, returns the HTTP response code specified. Valid values for `STATUS` are 403, 404, and 502. - rate_based_ban: limit client traffic to the configured threshold and ban the client if the traffic exceeds the threshold. Configure parameters for this action in RateLimitOptions. Requires rate_limit_options to be set. - redirect: redirect to a different target. This can either be an internal reCAPTCHA redirect, or an external URL-based redirect via a 302 response. Parameters for this action can be configured via redirectOptions. This action is only supported in Global Security Policies of type CLOUD_ARMOR. - throttle: limit client traffic to the configured threshold. Configure parameters for this action in rateLimitOptions. Requires rate_limit_options to be set for this.
"description": "A String", # An optional description of this resource. Provide this property when you create the resource.
"headerAction": { # Optional, additional actions that are performed on headers. This field is only supported in Global Security Policies of type CLOUD_ARMOR.
"requestHeadersToAdds": [ # The list of request headers to add or overwrite if they're already present.
{
"headerName": "A String", # The name of the header to set.
"headerValue": "A String", # The value to set the named header to.
},
],
},
"kind": "compute#securityPolicyRule", # [Output only] Type of the resource. Always compute#securityPolicyRule for security policy rules
"match": { # Represents a match condition that incoming traffic is evaluated against. Exactly one field must be specified. # A match condition that incoming traffic is evaluated against. If it evaluates to true, the corresponding 'action' is enforced.
"config": { # The configuration options available when specifying versioned_expr. This field must be specified if versioned_expr is specified and cannot be specified if versioned_expr is not specified.
"srcIpRanges": [ # CIDR IP address range. Maximum number of src_ip_ranges allowed is 10.
"A String",
],
},
"expr": { # Represents a textual expression in the Common Expression Language (CEL) syntax. CEL is a C-like expression language. The syntax and semantics of CEL are documented at https://github.com/google/cel-spec. Example (Comparison): title: "Summary size limit" description: "Determines if a summary is less than 100 chars" expression: "document.summary.size() < 100" Example (Equality): title: "Requestor is owner" description: "Determines if requestor is the document owner" expression: "document.owner == request.auth.claims.email" Example (Logic): title: "Public documents" description: "Determine whether the document should be publicly visible" expression: "document.type != 'private' && document.type != 'internal'" Example (Data Manipulation): title: "Notification string" description: "Create a notification string with a timestamp." expression: "'New message received at ' + string(document.create_time)" The exact variables and functions that may be referenced within an expression are determined by the service that evaluates it. See the service documentation for additional information. # User defined CEVAL expression. A CEVAL expression is used to specify match criteria such as origin.ip, source.region_code and contents in the request header. Expressions containing `evaluateThreatIntelligence` require Cloud Armor Managed Protection Plus tier and are not supported in Edge Policies nor in Regional Policies. Expressions containing `evaluatePreconfiguredExpr('sourceiplist-*')` require Cloud Armor Managed Protection Plus tier and are only supported in Global Security Policies.
"description": "A String", # Optional. Description of the expression. This is a longer text which describes the expression, e.g. when hovered over it in a UI.
"expression": "A String", # Textual representation of an expression in Common Expression Language syntax.
"location": "A String", # Optional. String indicating the location of the expression for error reporting, e.g. a file name and a position in the file.
"title": "A String", # Optional. Title for the expression, i.e. a short string describing its purpose. This can be used e.g. in UIs which allow to enter the expression.
},
"versionedExpr": "A String", # Preconfigured versioned expression. If this field is specified, config must also be specified. Available preconfigured expressions along with their requirements are: SRC_IPS_V1 - must specify the corresponding src_ip_range field in config.
},
"networkMatch": { # Represents a match condition that incoming network traffic is evaluated against. # A match condition that incoming packets are evaluated against for CLOUD_ARMOR_NETWORK security policies. If it matches, the corresponding 'action' is enforced. The match criteria for a rule consists of built-in match fields (like 'srcIpRanges') and potentially multiple user-defined match fields ('userDefinedFields'). Field values may be extracted directly from the packet or derived from it (e.g. 'srcRegionCodes'). Some fields may not be present in every packet (e.g. 'srcPorts'). A user-defined field is only present if the base header is found in the packet and the entire field is in bounds. Each match field may specify which values can match it, listing one or more ranges, prefixes, or exact values that are considered a match for the field. A field value must be present in order to match a specified match field. If no match values are specified for a match field, then any field value is considered to match it, and it's not required to be present. For strings specifying '*' is also equivalent to match all. For a packet to match a rule, all specified match fields must match the corresponding field values derived from the packet. Example: networkMatch: srcIpRanges: - "192.0.2.0/24" - "198.51.100.0/24" userDefinedFields: - name: "ipv4_fragment_offset" values: - "1-0x1fff" The above match condition matches packets with a source IP in 192.0.2.0/24 or 198.51.100.0/24 and a user-defined field named "ipv4_fragment_offset" with a value between 1 and 0x1fff inclusive.
"destIpRanges": [ # Destination IPv4/IPv6 addresses or CIDR prefixes, in standard text format.
"A String",
],
"destPorts": [ # Destination port numbers for TCP/UDP/SCTP. Each element can be a 16-bit unsigned decimal number (e.g. "80") or range (e.g. "0-1023").
"A String",
],
"ipProtocols": [ # IPv4 protocol / IPv6 next header (after extension headers). Each element can be an 8-bit unsigned decimal number (e.g. "6"), range (e.g. "253-254"), or one of the following protocol names: "tcp", "udp", "icmp", "esp", "ah", "ipip", or "sctp".
"A String",
],
"srcAsns": [ # BGP Autonomous System Number associated with the source IP address.
42,
],
"srcIpRanges": [ # Source IPv4/IPv6 addresses or CIDR prefixes, in standard text format.
"A String",
],
"srcPorts": [ # Source port numbers for TCP/UDP/SCTP. Each element can be a 16-bit unsigned decimal number (e.g. "80") or range (e.g. "0-1023").
"A String",
],
"srcRegionCodes": [ # Two-letter ISO 3166-1 alpha-2 country code associated with the source IP address.
"A String",
],
"userDefinedFields": [ # User-defined fields. Each element names a defined field and lists the matching values for that field.
{
"name": "A String", # Name of the user-defined field, as given in the definition.
"values": [ # Matching values of the field. Each element can be a 32-bit unsigned decimal or hexadecimal (starting with "0x") number (e.g. "64") or range (e.g. "0x400-0x7ff").
"A String",
],
},
],
},
"preconfiguredWafConfig": { # Preconfigured WAF configuration to be applied for the rule. If the rule does not evaluate preconfigured WAF rules, i.e., if evaluatePreconfiguredWaf() is not used, this field will have no effect.
"exclusions": [ # A list of exclusions to apply during preconfigured WAF evaluation.
{
"requestCookiesToExclude": [ # A list of request cookie names whose value will be excluded from inspection during preconfigured WAF evaluation.
{
"op": "A String", # The match operator for the field.
"val": "A String", # The value of the field.
},
],
"requestHeadersToExclude": [ # A list of request header names whose value will be excluded from inspection during preconfigured WAF evaluation.
{
"op": "A String", # The match operator for the field.
"val": "A String", # The value of the field.
},
],
"requestQueryParamsToExclude": [ # A list of request query parameter names whose value will be excluded from inspection during preconfigured WAF evaluation. Note that the parameter can be in the query string or in the POST body.
{
"op": "A String", # The match operator for the field.
"val": "A String", # The value of the field.
},
],
"requestUrisToExclude": [ # A list of request URIs from the request line to be excluded from inspection during preconfigured WAF evaluation. When specifying this field, the query or fragment part should be excluded.
{
"op": "A String", # The match operator for the field.
"val": "A String", # The value of the field.
},
],
"targetRuleIds": [ # A list of target rule IDs under the WAF rule set to apply the preconfigured WAF exclusion. If omitted, it refers to all the rule IDs under the WAF rule set.
"A String",
],
"targetRuleSet": "A String", # Target WAF rule set to apply the preconfigured WAF exclusion.
},
],
},
"preview": True or False, # If set to true, the specified action is not enforced.
"priority": 42, # An integer indicating the priority of a rule in the list. The priority must be a positive value between 0 and 2147483647. Rules are evaluated from highest to lowest priority where 0 is the highest priority and 2147483647 is the lowest priority.
"rateLimitOptions": { # Must be specified if the action is "rate_based_ban" or "throttle". Cannot be specified for any other actions.
"banDurationSec": 42, # Can only be specified if the action for the rule is "rate_based_ban". If specified, determines the time (in seconds) the traffic will continue to be banned by the rate limit after the rate falls below the threshold.
"banThreshold": { # Can only be specified if the action for the rule is "rate_based_ban". If specified, the key will be banned for the configured 'ban_duration_sec' when the number of requests that exceed the 'rate_limit_threshold' also exceed this 'ban_threshold'.
"count": 42, # Number of HTTP(S) requests for calculating the threshold.
"intervalSec": 42, # Interval over which the threshold is computed.
},
"conformAction": "A String", # Action to take for requests that are under the configured rate limit threshold. Valid option is "allow" only.
"enforceOnKey": "A String", # Determines the key to enforce the rate_limit_threshold on. Possible values are: - ALL: A single rate limit threshold is applied to all the requests matching this rule. This is the default value if "enforceOnKey" is not configured. - IP: The source IP address of the request is the key. Each IP has this limit enforced separately. - HTTP_HEADER: The value of the HTTP header whose name is configured under "enforceOnKeyName". The key value is truncated to the first 128 bytes of the header value. If no such header is present in the request, the key type defaults to ALL. - XFF_IP: The first IP address (i.e. the originating client IP address) specified in the list of IPs under X-Forwarded-For HTTP header. If no such header is present or the value is not a valid IP, the key defaults to the source IP address of the request i.e. key type IP. - HTTP_COOKIE: The value of the HTTP cookie whose name is configured under "enforceOnKeyName". The key value is truncated to the first 128 bytes of the cookie value. If no such cookie is present in the request, the key type defaults to ALL. - HTTP_PATH: The URL path of the HTTP request. The key value is truncated to the first 128 bytes. - SNI: Server name indication in the TLS session of the HTTPS request. The key value is truncated to the first 128 bytes. The key type defaults to ALL on a HTTP session. - REGION_CODE: The country/region from which the request originates.
"enforceOnKeyConfigs": [ # If specified, any combination of values of enforce_on_key_type/enforce_on_key_name is treated as the key on which ratelimit threshold/action is enforced. You can specify up to 3 enforce_on_key_configs. If enforce_on_key_configs is specified, enforce_on_key must not be specified.
{
"enforceOnKeyName": "A String", # Rate limit key name applicable only for the following key types: HTTP_HEADER -- Name of the HTTP header whose value is taken as the key value. HTTP_COOKIE -- Name of the HTTP cookie whose value is taken as the key value.
"enforceOnKeyType": "A String", # Determines the key to enforce the rate_limit_threshold on. Possible values are: - ALL: A single rate limit threshold is applied to all the requests matching this rule. This is the default value if "enforceOnKeyConfigs" is not configured. - IP: The source IP address of the request is the key. Each IP has this limit enforced separately. - HTTP_HEADER: The value of the HTTP header whose name is configured under "enforceOnKeyName". The key value is truncated to the first 128 bytes of the header value. If no such header is present in the request, the key type defaults to ALL. - XFF_IP: The first IP address (i.e. the originating client IP address) specified in the list of IPs under X-Forwarded-For HTTP header. If no such header is present or the value is not a valid IP, the key defaults to the source IP address of the request i.e. key type IP. - HTTP_COOKIE: The value of the HTTP cookie whose name is configured under "enforceOnKeyName". The key value is truncated to the first 128 bytes of the cookie value. If no such cookie is present in the request, the key type defaults to ALL. - HTTP_PATH: The URL path of the HTTP request. The key value is truncated to the first 128 bytes. - SNI: Server name indication in the TLS session of the HTTPS request. The key value is truncated to the first 128 bytes. The key type defaults to ALL on a HTTP session. - REGION_CODE: The country/region from which the request originates.
},
],
"enforceOnKeyName": "A String", # Rate limit key name applicable only for the following key types: HTTP_HEADER -- Name of the HTTP header whose value is taken as the key value. HTTP_COOKIE -- Name of the HTTP cookie whose value is taken as the key value.
"exceedAction": "A String", # Action to take for requests that are above the configured rate limit threshold, to either deny with a specified HTTP response code, or redirect to a different endpoint. Valid options are `deny(STATUS)`, where valid values for `STATUS` are 403, 404, 429, and 502, and `redirect`, where the redirect parameters come from `exceedRedirectOptions` below. The `redirect` action is only supported in Global Security Policies of type CLOUD_ARMOR.
"exceedRedirectOptions": { # Parameters defining the redirect action that is used as the exceed action. Cannot be specified if the exceed action is not redirect. This field is only supported in Global Security Policies of type CLOUD_ARMOR.
"target": "A String", # Target for the redirect action. This is required if the type is EXTERNAL_302 and cannot be specified for GOOGLE_RECAPTCHA.
"type": "A String", # Type of the redirect action.
},
"rateLimitThreshold": { # Threshold at which to begin ratelimiting.
"count": 42, # Number of HTTP(S) requests for calculating the threshold.
"intervalSec": 42, # Interval over which the threshold is computed.
},
},
"redirectOptions": { # Parameters defining the redirect action. Cannot be specified for any other actions. This field is only supported in Global Security Policies of type CLOUD_ARMOR.
"target": "A String", # Target for the redirect action. This is required if the type is EXTERNAL_302 and cannot be specified for GOOGLE_RECAPTCHA.
"type": "A String", # Type of the redirect action.
},
}
validateOnly: boolean, If true, the request will not be committed.
x__xgafv: string, V1 error format.
Allowed values
1 - v1 error format
2 - v2 error format
Returns:
An object of the form:
{ # Represents an Operation resource. Google Compute Engine has three Operation resources: * [Global](/compute/docs/reference/rest/v1/globalOperations) * [Regional](/compute/docs/reference/rest/v1/regionOperations) * [Zonal](/compute/docs/reference/rest/v1/zoneOperations) You can use an operation resource to manage asynchronous API requests. For more information, read Handling API responses. Operations can be global, regional or zonal. - For global operations, use the `globalOperations` resource. - For regional operations, use the `regionOperations` resource. - For zonal operations, use the `zoneOperations` resource. For more information, read Global, Regional, and Zonal Resources.
"clientOperationId": "A String", # [Output Only] The value of `requestId` if you provided it in the request. Not present otherwise.
"creationTimestamp": "A String", # [Deprecated] This field is deprecated.
"description": "A String", # [Output Only] A textual description of the operation, which is set when the operation is created.
"endTime": "A String", # [Output Only] The time that this operation was completed. This value is in RFC3339 text format.
"error": { # [Output Only] If errors are generated during processing of the operation, this field will be populated.
"errors": [ # [Output Only] The array of errors encountered while processing this operation.
{
"code": "A String", # [Output Only] The error type identifier for this error.
"errorDetails": [ # [Output Only] An optional list of messages that contain the error details. There is a set of defined message types to use for providing details.The syntax depends on the error code. For example, QuotaExceededInfo will have details when the error code is QUOTA_EXCEEDED.
{
"errorInfo": { # Describes the cause of the error with structured details. Example of an error when contacting the "pubsub.googleapis.com" API when it is not enabled: { "reason": "API_DISABLED" "domain": "googleapis.com" "metadata": { "resource": "projects/123", "service": "pubsub.googleapis.com" } } This response indicates that the pubsub.googleapis.com API is not enabled. Example of an error that is returned when attempting to create a Spanner instance in a region that is out of stock: { "reason": "STOCKOUT" "domain": "spanner.googleapis.com", "metadata": { "availableRegions": "us-central1,us-east2" } }
"domain": "A String", # The logical grouping to which the "reason" belongs. The error domain is typically the registered service name of the tool or product that generates the error. Example: "pubsub.googleapis.com". If the error is generated by some common infrastructure, the error domain must be a globally unique value that identifies the infrastructure. For Google API infrastructure, the error domain is "googleapis.com".
"metadatas": { # Additional structured details about this error. Keys should match /[a-zA-Z0-9-_]/ and be limited to 64 characters in length. When identifying the current value of an exceeded limit, the units should be contained in the key, not the value. For example, rather than {"instanceLimit": "100/request"}, should be returned as, {"instanceLimitPerRequest": "100"}, if the client exceeds the number of instances that can be created in a single (batch) request.
"a_key": "A String",
},
"reason": "A String", # The reason of the error. This is a constant value that identifies the proximate cause of the error. Error reasons are unique within a particular domain of errors. This should be at most 63 characters and match a regular expression of `A-Z+[A-Z0-9]`, which represents UPPER_SNAKE_CASE.
},
"help": { # Provides links to documentation or for performing an out of band action. For example, if a quota check failed with an error indicating the calling project hasn't enabled the accessed service, this can contain a URL pointing directly to the right place in the developer console to flip the bit.
"links": [ # URL(s) pointing to additional information on handling the current error.
{ # Describes a URL link.
"description": "A String", # Describes what the link offers.
"url": "A String", # The URL of the link.
},
],
},
"localizedMessage": { # Provides a localized error message that is safe to return to the user which can be attached to an RPC error.
"locale": "A String", # The locale used following the specification defined at https://www.rfc-editor.org/rfc/bcp/bcp47.txt. Examples are: "en-US", "fr-CH", "es-MX"
"message": "A String", # The localized error message in the above locale.
},
"quotaInfo": { # Additional details for quota exceeded error for resource quota.
"dimensions": { # The map holding related quota dimensions.
"a_key": "A String",
},
"futureLimit": 3.14, # Future quota limit being rolled out. The limit's unit depends on the quota type or metric.
"limit": 3.14, # Current effective quota limit. The limit's unit depends on the quota type or metric.
"limitName": "A String", # The name of the quota limit.
"metricName": "A String", # The Compute Engine quota metric name.
"rolloutStatus": "A String", # Rollout status of the future quota limit.
},
},
],
"location": "A String", # [Output Only] Indicates the field in the request that caused the error. This property is optional.
"message": "A String", # [Output Only] An optional, human-readable error message.
},
],
},
"httpErrorMessage": "A String", # [Output Only] If the operation fails, this field contains the HTTP error message that was returned, such as `NOT FOUND`.
"httpErrorStatusCode": 42, # [Output Only] If the operation fails, this field contains the HTTP error status code that was returned. For example, a `404` means the resource was not found.
"id": "A String", # [Output Only] The unique identifier for the operation. This identifier is defined by the server.
"insertTime": "A String", # [Output Only] The time that this operation was requested. This value is in RFC3339 text format.
"instancesBulkInsertOperationMetadata": {
"perLocationStatus": { # Status information per location (location name is key). Example key: zones/us-central1-a
"a_key": {
"createdVmCount": 42, # [Output Only] Count of VMs successfully created so far.
"deletedVmCount": 42, # [Output Only] Count of VMs that got deleted during rollback.
"failedToCreateVmCount": 42, # [Output Only] Count of VMs that started creating but encountered an error.
"status": "A String", # [Output Only] Creation status of BulkInsert operation - information if the flow is rolling forward or rolling back.
"targetVmCount": 42, # [Output Only] Count of VMs originally planned to be created.
},
},
},
"kind": "compute#operation", # [Output Only] Type of the resource. Always `compute#operation` for Operation resources.
"name": "A String", # [Output Only] Name of the operation.
"operationGroupId": "A String", # [Output Only] An ID that represents a group of operations, such as when a group of operations results from a `bulkInsert` API request.
"operationType": "A String", # [Output Only] The type of operation, such as `insert`, `update`, or `delete`, and so on.
"progress": 42, # [Output Only] An optional progress indicator that ranges from 0 to 100. There is no requirement that this be linear or support any granularity of operations. This should not be used to guess when the operation will be complete. This number should monotonically increase as the operation progresses.
"region": "A String", # [Output Only] The URL of the region where the operation resides. Only applicable when performing regional operations.
"selfLink": "A String", # [Output Only] Server-defined URL for the resource.
"setCommonInstanceMetadataOperationMetadata": { # [Output Only] If the operation is for projects.setCommonInstanceMetadata, this field will contain information on all underlying zonal actions and their state.
"clientOperationId": "A String", # [Output Only] The client operation id.
"perLocationOperations": { # [Output Only] Status information per location (location name is key). Example key: zones/us-central1-a
"a_key": {
"error": { # The `Status` type defines a logical error model that is suitable for different programming environments, including REST APIs and RPC APIs. It is used by [gRPC](https://github.com/grpc). Each `Status` message contains three pieces of data: error code, error message, and error details. You can find out more about this error model and how to work with it in the [API Design Guide](https://cloud.google.com/apis/design/errors). # [Output Only] If state is `ABANDONED` or `FAILED`, this field is populated.
"code": 42, # The status code, which should be an enum value of google.rpc.Code.
"details": [ # A list of messages that carry the error details. There is a common set of message types for APIs to use.
{
"a_key": "", # Properties of the object. Contains field @type with type URL.
},
],
"message": "A String", # A developer-facing error message, which should be in English. Any user-facing error message should be localized and sent in the google.rpc.Status.details field, or localized by the client.
},
"state": "A String", # [Output Only] Status of the action, which can be one of the following: `PROPAGATING`, `PROPAGATED`, `ABANDONED`, `FAILED`, or `DONE`.
},
},
},
"startTime": "A String", # [Output Only] The time that this operation was started by the server. This value is in RFC3339 text format.
"status": "A String", # [Output Only] The status of the operation, which can be one of the following: `PENDING`, `RUNNING`, or `DONE`.
"statusMessage": "A String", # [Output Only] An optional textual description of the current status of the operation.
"targetId": "A String", # [Output Only] The unique target ID, which identifies a specific incarnation of the target resource.
"targetLink": "A String", # [Output Only] The URL of the resource that the operation modifies. For operations related to creating a snapshot, this points to the persistent disk that the snapshot was created from.
"user": "A String", # [Output Only] User who requested the operation, for example: `user@example.com` or `alice_smith_identifier (global/workforcePools/example-com-us-employees)`.
"warnings": [ # [Output Only] If warning messages are generated during processing of the operation, this field will be populated.
{
"code": "A String", # [Output Only] A warning code, if applicable. For example, Compute Engine returns NO_RESULTS_ON_PAGE if there are no results in the response.
"data": [ # [Output Only] Metadata about this warning in key: value format. For example: "data": [ { "key": "scope", "value": "zones/us-east1-d" }
{
"key": "A String", # [Output Only] A key that provides more detail on the warning being returned. For example, for warnings where there are no results in a list request for a particular zone, this key might be scope and the key value might be the zone name. Other examples might be a key indicating a deprecated resource and a suggested replacement, or a warning about invalid network settings (for example, if an instance attempts to perform IP forwarding but is not enabled for IP forwarding).
"value": "A String", # [Output Only] A warning data value corresponding to the key.
},
],
"message": "A String", # [Output Only] A human-readable description of the warning code.
},
],
"zone": "A String", # [Output Only] The URL of the zone where the operation resides. Only applicable when performing per-zone operations.
}
close()
Close httplib2 connections.
delete(project, region, securityPolicy, requestId=None, x__xgafv=None)
Deletes the specified policy.
Args:
project: string, Project ID for this request. (required)
region: string, Name of the region scoping this request. (required)
securityPolicy: string, Name of the security policy to delete. (required)
requestId: string, An optional request ID to identify requests. Specify a unique request ID so that if you must retry your request, the server will know to ignore the request if it has already been completed. For example, consider a situation where you make an initial request and the request times out. If you make the request again with the same request ID, the server can check if original operation with the same request ID was received, and if so, will ignore the second request. This prevents clients from accidentally creating duplicate commitments. The request ID must be a valid UUID with the exception that zero UUID is not supported ( 00000000-0000-0000-0000-000000000000).
x__xgafv: string, V1 error format.
Allowed values
1 - v1 error format
2 - v2 error format
Returns:
An object of the form:
{ # Represents an Operation resource. Google Compute Engine has three Operation resources: * [Global](/compute/docs/reference/rest/v1/globalOperations) * [Regional](/compute/docs/reference/rest/v1/regionOperations) * [Zonal](/compute/docs/reference/rest/v1/zoneOperations) You can use an operation resource to manage asynchronous API requests. For more information, read Handling API responses. Operations can be global, regional or zonal. - For global operations, use the `globalOperations` resource. - For regional operations, use the `regionOperations` resource. - For zonal operations, use the `zoneOperations` resource. For more information, read Global, Regional, and Zonal Resources.
"clientOperationId": "A String", # [Output Only] The value of `requestId` if you provided it in the request. Not present otherwise.
"creationTimestamp": "A String", # [Deprecated] This field is deprecated.
"description": "A String", # [Output Only] A textual description of the operation, which is set when the operation is created.
"endTime": "A String", # [Output Only] The time that this operation was completed. This value is in RFC3339 text format.
"error": { # [Output Only] If errors are generated during processing of the operation, this field will be populated.
"errors": [ # [Output Only] The array of errors encountered while processing this operation.
{
"code": "A String", # [Output Only] The error type identifier for this error.
"errorDetails": [ # [Output Only] An optional list of messages that contain the error details. There is a set of defined message types to use for providing details.The syntax depends on the error code. For example, QuotaExceededInfo will have details when the error code is QUOTA_EXCEEDED.
{
"errorInfo": { # Describes the cause of the error with structured details. Example of an error when contacting the "pubsub.googleapis.com" API when it is not enabled: { "reason": "API_DISABLED" "domain": "googleapis.com" "metadata": { "resource": "projects/123", "service": "pubsub.googleapis.com" } } This response indicates that the pubsub.googleapis.com API is not enabled. Example of an error that is returned when attempting to create a Spanner instance in a region that is out of stock: { "reason": "STOCKOUT" "domain": "spanner.googleapis.com", "metadata": { "availableRegions": "us-central1,us-east2" } }
"domain": "A String", # The logical grouping to which the "reason" belongs. The error domain is typically the registered service name of the tool or product that generates the error. Example: "pubsub.googleapis.com". If the error is generated by some common infrastructure, the error domain must be a globally unique value that identifies the infrastructure. For Google API infrastructure, the error domain is "googleapis.com".
"metadatas": { # Additional structured details about this error. Keys should match /[a-zA-Z0-9-_]/ and be limited to 64 characters in length. When identifying the current value of an exceeded limit, the units should be contained in the key, not the value. For example, rather than {"instanceLimit": "100/request"}, should be returned as, {"instanceLimitPerRequest": "100"}, if the client exceeds the number of instances that can be created in a single (batch) request.
"a_key": "A String",
},
"reason": "A String", # The reason of the error. This is a constant value that identifies the proximate cause of the error. Error reasons are unique within a particular domain of errors. This should be at most 63 characters and match a regular expression of `A-Z+[A-Z0-9]`, which represents UPPER_SNAKE_CASE.
},
"help": { # Provides links to documentation or for performing an out of band action. For example, if a quota check failed with an error indicating the calling project hasn't enabled the accessed service, this can contain a URL pointing directly to the right place in the developer console to flip the bit.
"links": [ # URL(s) pointing to additional information on handling the current error.
{ # Describes a URL link.
"description": "A String", # Describes what the link offers.
"url": "A String", # The URL of the link.
},
],
},
"localizedMessage": { # Provides a localized error message that is safe to return to the user which can be attached to an RPC error.
"locale": "A String", # The locale used following the specification defined at https://www.rfc-editor.org/rfc/bcp/bcp47.txt. Examples are: "en-US", "fr-CH", "es-MX"
"message": "A String", # The localized error message in the above locale.
},
"quotaInfo": { # Additional details for quota exceeded error for resource quota.
"dimensions": { # The map holding related quota dimensions.
"a_key": "A String",
},
"futureLimit": 3.14, # Future quota limit being rolled out. The limit's unit depends on the quota type or metric.
"limit": 3.14, # Current effective quota limit. The limit's unit depends on the quota type or metric.
"limitName": "A String", # The name of the quota limit.
"metricName": "A String", # The Compute Engine quota metric name.
"rolloutStatus": "A String", # Rollout status of the future quota limit.
},
},
],
"location": "A String", # [Output Only] Indicates the field in the request that caused the error. This property is optional.
"message": "A String", # [Output Only] An optional, human-readable error message.
},
],
},
"httpErrorMessage": "A String", # [Output Only] If the operation fails, this field contains the HTTP error message that was returned, such as `NOT FOUND`.
"httpErrorStatusCode": 42, # [Output Only] If the operation fails, this field contains the HTTP error status code that was returned. For example, a `404` means the resource was not found.
"id": "A String", # [Output Only] The unique identifier for the operation. This identifier is defined by the server.
"insertTime": "A String", # [Output Only] The time that this operation was requested. This value is in RFC3339 text format.
"instancesBulkInsertOperationMetadata": {
"perLocationStatus": { # Status information per location (location name is key). Example key: zones/us-central1-a
"a_key": {
"createdVmCount": 42, # [Output Only] Count of VMs successfully created so far.
"deletedVmCount": 42, # [Output Only] Count of VMs that got deleted during rollback.
"failedToCreateVmCount": 42, # [Output Only] Count of VMs that started creating but encountered an error.
"status": "A String", # [Output Only] Creation status of BulkInsert operation - information if the flow is rolling forward or rolling back.
"targetVmCount": 42, # [Output Only] Count of VMs originally planned to be created.
},
},
},
"kind": "compute#operation", # [Output Only] Type of the resource. Always `compute#operation` for Operation resources.
"name": "A String", # [Output Only] Name of the operation.
"operationGroupId": "A String", # [Output Only] An ID that represents a group of operations, such as when a group of operations results from a `bulkInsert` API request.
"operationType": "A String", # [Output Only] The type of operation, such as `insert`, `update`, or `delete`, and so on.
"progress": 42, # [Output Only] An optional progress indicator that ranges from 0 to 100. There is no requirement that this be linear or support any granularity of operations. This should not be used to guess when the operation will be complete. This number should monotonically increase as the operation progresses.
"region": "A String", # [Output Only] The URL of the region where the operation resides. Only applicable when performing regional operations.
"selfLink": "A String", # [Output Only] Server-defined URL for the resource.
"setCommonInstanceMetadataOperationMetadata": { # [Output Only] If the operation is for projects.setCommonInstanceMetadata, this field will contain information on all underlying zonal actions and their state.
"clientOperationId": "A String", # [Output Only] The client operation id.
"perLocationOperations": { # [Output Only] Status information per location (location name is key). Example key: zones/us-central1-a
"a_key": {
"error": { # The `Status` type defines a logical error model that is suitable for different programming environments, including REST APIs and RPC APIs. It is used by [gRPC](https://github.com/grpc). Each `Status` message contains three pieces of data: error code, error message, and error details. You can find out more about this error model and how to work with it in the [API Design Guide](https://cloud.google.com/apis/design/errors). # [Output Only] If state is `ABANDONED` or `FAILED`, this field is populated.
"code": 42, # The status code, which should be an enum value of google.rpc.Code.
"details": [ # A list of messages that carry the error details. There is a common set of message types for APIs to use.
{
"a_key": "", # Properties of the object. Contains field @type with type URL.
},
],
"message": "A String", # A developer-facing error message, which should be in English. Any user-facing error message should be localized and sent in the google.rpc.Status.details field, or localized by the client.
},
"state": "A String", # [Output Only] Status of the action, which can be one of the following: `PROPAGATING`, `PROPAGATED`, `ABANDONED`, `FAILED`, or `DONE`.
},
},
},
"startTime": "A String", # [Output Only] The time that this operation was started by the server. This value is in RFC3339 text format.
"status": "A String", # [Output Only] The status of the operation, which can be one of the following: `PENDING`, `RUNNING`, or `DONE`.
"statusMessage": "A String", # [Output Only] An optional textual description of the current status of the operation.
"targetId": "A String", # [Output Only] The unique target ID, which identifies a specific incarnation of the target resource.
"targetLink": "A String", # [Output Only] The URL of the resource that the operation modifies. For operations related to creating a snapshot, this points to the persistent disk that the snapshot was created from.
"user": "A String", # [Output Only] User who requested the operation, for example: `user@example.com` or `alice_smith_identifier (global/workforcePools/example-com-us-employees)`.
"warnings": [ # [Output Only] If warning messages are generated during processing of the operation, this field will be populated.
{
"code": "A String", # [Output Only] A warning code, if applicable. For example, Compute Engine returns NO_RESULTS_ON_PAGE if there are no results in the response.
"data": [ # [Output Only] Metadata about this warning in key: value format. For example: "data": [ { "key": "scope", "value": "zones/us-east1-d" }
{
"key": "A String", # [Output Only] A key that provides more detail on the warning being returned. For example, for warnings where there are no results in a list request for a particular zone, this key might be scope and the key value might be the zone name. Other examples might be a key indicating a deprecated resource and a suggested replacement, or a warning about invalid network settings (for example, if an instance attempts to perform IP forwarding but is not enabled for IP forwarding).
"value": "A String", # [Output Only] A warning data value corresponding to the key.
},
],
"message": "A String", # [Output Only] A human-readable description of the warning code.
},
],
"zone": "A String", # [Output Only] The URL of the zone where the operation resides. Only applicable when performing per-zone operations.
}
get(project, region, securityPolicy, x__xgafv=None)
List all of the ordered rules present in a single specified policy.
Args:
project: string, Project ID for this request. (required)
region: string, Name of the region scoping this request. (required)
securityPolicy: string, Name of the security policy to get. (required)
x__xgafv: string, V1 error format.
Allowed values
1 - v1 error format
2 - v2 error format
Returns:
An object of the form:
{ # Represents a Google Cloud Armor security policy resource. Only external backend services that use load balancers can reference a security policy. For more information, see Google Cloud Armor security policy overview.
"adaptiveProtectionConfig": { # Configuration options for Cloud Armor Adaptive Protection (CAAP).
"layer7DdosDefenseConfig": { # Configuration options for L7 DDoS detection. This field is only supported in Global Security Policies of type CLOUD_ARMOR. # If set to true, enables Cloud Armor Machine Learning.
"enable": True or False, # If set to true, enables CAAP for L7 DDoS detection. This field is only supported in Global Security Policies of type CLOUD_ARMOR.
"ruleVisibility": "A String", # Rule visibility can be one of the following: STANDARD - opaque rules. (default) PREMIUM - transparent rules. This field is only supported in Global Security Policies of type CLOUD_ARMOR.
"thresholdConfigs": [ # Configuration options for layer7 adaptive protection for various customizable thresholds.
{
"autoDeployConfidenceThreshold": 3.14,
"autoDeployExpirationSec": 42,
"autoDeployImpactedBaselineThreshold": 3.14,
"autoDeployLoadThreshold": 3.14,
"name": "A String", # The name must be 1-63 characters long, and comply with RFC1035. The name must be unique within the security policy.
},
],
},
},
"advancedOptionsConfig": {
"jsonCustomConfig": { # Custom configuration to apply the JSON parsing. Only applicable when json_parsing is set to STANDARD.
"contentTypes": [ # A list of custom Content-Type header values to apply the JSON parsing. As per RFC 1341, a Content-Type header value has the following format: Content-Type := type "/" subtype *[";" parameter] When configuring a custom Content-Type header value, only the type/subtype needs to be specified, and the parameters should be excluded.
"A String",
],
},
"jsonParsing": "A String",
"logLevel": "A String",
"userIpRequestHeaders": [ # An optional list of case-insensitive request header names to use for resolving the callers client IP address.
"A String",
],
},
"creationTimestamp": "A String", # [Output Only] Creation timestamp in RFC3339 text format.
"ddosProtectionConfig": {
"ddosProtection": "A String",
},
"description": "A String", # An optional description of this resource. Provide this property when you create the resource.
"fingerprint": "A String", # Specifies a fingerprint for this resource, which is essentially a hash of the metadata's contents and used for optimistic locking. The fingerprint is initially generated by Compute Engine and changes after every request to modify or update metadata. You must always provide an up-to-date fingerprint hash in order to update or change metadata, otherwise the request will fail with error 412 conditionNotMet. To see the latest fingerprint, make get() request to the security policy.
"id": "A String", # [Output Only] The unique identifier for the resource. This identifier is defined by the server.
"kind": "compute#securityPolicy", # [Output only] Type of the resource. Always compute#securityPolicyfor security policies
"labelFingerprint": "A String", # A fingerprint for the labels being applied to this security policy, which is essentially a hash of the labels set used for optimistic locking. The fingerprint is initially generated by Compute Engine and changes after every request to modify or update labels. You must always provide an up-to-date fingerprint hash in order to update or change labels. To see the latest fingerprint, make get() request to the security policy.
"labels": { # Labels for this resource. These can only be added or modified by the setLabels method. Each label key/value pair must comply with RFC1035. Label values may be empty.
"a_key": "A String",
},
"name": "A String", # Name of the resource. Provided by the client when the resource is created. The name must be 1-63 characters long, and comply with RFC1035. Specifically, the name must be 1-63 characters long and match the regular expression `[a-z]([-a-z0-9]*[a-z0-9])?` which means the first character must be a lowercase letter, and all following characters must be a dash, lowercase letter, or digit, except the last character, which cannot be a dash.
"recaptchaOptionsConfig": {
"redirectSiteKey": "A String", # An optional field to supply a reCAPTCHA site key to be used for all the rules using the redirect action with the type of GOOGLE_RECAPTCHA under the security policy. The specified site key needs to be created from the reCAPTCHA API. The user is responsible for the validity of the specified site key. If not specified, a Google-managed site key is used. This field is only supported in Global Security Policies of type CLOUD_ARMOR.
},
"region": "A String", # [Output Only] URL of the region where the regional security policy resides. This field is not applicable to global security policies.
"rules": [ # A list of rules that belong to this policy. There must always be a default rule which is a rule with priority 2147483647 and match all condition (for the match condition this means match "*" for srcIpRanges and for the networkMatch condition every field must be either match "*" or not set). If no rules are provided when creating a security policy, a default rule with action "allow" will be added.
{ # Represents a rule that describes one or more match conditions along with the action to be taken when traffic matches this condition (allow or deny).
"action": "A String", # The Action to perform when the rule is matched. The following are the valid actions: - allow: allow access to target. - deny(STATUS): deny access to target, returns the HTTP response code specified. Valid values for `STATUS` are 403, 404, and 502. - rate_based_ban: limit client traffic to the configured threshold and ban the client if the traffic exceeds the threshold. Configure parameters for this action in RateLimitOptions. Requires rate_limit_options to be set. - redirect: redirect to a different target. This can either be an internal reCAPTCHA redirect, or an external URL-based redirect via a 302 response. Parameters for this action can be configured via redirectOptions. This action is only supported in Global Security Policies of type CLOUD_ARMOR. - throttle: limit client traffic to the configured threshold. Configure parameters for this action in rateLimitOptions. Requires rate_limit_options to be set for this.
"description": "A String", # An optional description of this resource. Provide this property when you create the resource.
"headerAction": { # Optional, additional actions that are performed on headers. This field is only supported in Global Security Policies of type CLOUD_ARMOR.
"requestHeadersToAdds": [ # The list of request headers to add or overwrite if they're already present.
{
"headerName": "A String", # The name of the header to set.
"headerValue": "A String", # The value to set the named header to.
},
],
},
"kind": "compute#securityPolicyRule", # [Output only] Type of the resource. Always compute#securityPolicyRule for security policy rules
"match": { # Represents a match condition that incoming traffic is evaluated against. Exactly one field must be specified. # A match condition that incoming traffic is evaluated against. If it evaluates to true, the corresponding 'action' is enforced.
"config": { # The configuration options available when specifying versioned_expr. This field must be specified if versioned_expr is specified and cannot be specified if versioned_expr is not specified.
"srcIpRanges": [ # CIDR IP address range. Maximum number of src_ip_ranges allowed is 10.
"A String",
],
},
"expr": { # Represents a textual expression in the Common Expression Language (CEL) syntax. CEL is a C-like expression language. The syntax and semantics of CEL are documented at https://github.com/google/cel-spec. Example (Comparison): title: "Summary size limit" description: "Determines if a summary is less than 100 chars" expression: "document.summary.size() < 100" Example (Equality): title: "Requestor is owner" description: "Determines if requestor is the document owner" expression: "document.owner == request.auth.claims.email" Example (Logic): title: "Public documents" description: "Determine whether the document should be publicly visible" expression: "document.type != 'private' && document.type != 'internal'" Example (Data Manipulation): title: "Notification string" description: "Create a notification string with a timestamp." expression: "'New message received at ' + string(document.create_time)" The exact variables and functions that may be referenced within an expression are determined by the service that evaluates it. See the service documentation for additional information. # User defined CEVAL expression. A CEVAL expression is used to specify match criteria such as origin.ip, source.region_code and contents in the request header. Expressions containing `evaluateThreatIntelligence` require Cloud Armor Managed Protection Plus tier and are not supported in Edge Policies nor in Regional Policies. Expressions containing `evaluatePreconfiguredExpr('sourceiplist-*')` require Cloud Armor Managed Protection Plus tier and are only supported in Global Security Policies.
"description": "A String", # Optional. Description of the expression. This is a longer text which describes the expression, e.g. when hovered over it in a UI.
"expression": "A String", # Textual representation of an expression in Common Expression Language syntax.
"location": "A String", # Optional. String indicating the location of the expression for error reporting, e.g. a file name and a position in the file.
"title": "A String", # Optional. Title for the expression, i.e. a short string describing its purpose. This can be used e.g. in UIs which allow to enter the expression.
},
"versionedExpr": "A String", # Preconfigured versioned expression. If this field is specified, config must also be specified. Available preconfigured expressions along with their requirements are: SRC_IPS_V1 - must specify the corresponding src_ip_range field in config.
},
"networkMatch": { # Represents a match condition that incoming network traffic is evaluated against. # A match condition that incoming packets are evaluated against for CLOUD_ARMOR_NETWORK security policies. If it matches, the corresponding 'action' is enforced. The match criteria for a rule consists of built-in match fields (like 'srcIpRanges') and potentially multiple user-defined match fields ('userDefinedFields'). Field values may be extracted directly from the packet or derived from it (e.g. 'srcRegionCodes'). Some fields may not be present in every packet (e.g. 'srcPorts'). A user-defined field is only present if the base header is found in the packet and the entire field is in bounds. Each match field may specify which values can match it, listing one or more ranges, prefixes, or exact values that are considered a match for the field. A field value must be present in order to match a specified match field. If no match values are specified for a match field, then any field value is considered to match it, and it's not required to be present. For strings specifying '*' is also equivalent to match all. For a packet to match a rule, all specified match fields must match the corresponding field values derived from the packet. Example: networkMatch: srcIpRanges: - "192.0.2.0/24" - "198.51.100.0/24" userDefinedFields: - name: "ipv4_fragment_offset" values: - "1-0x1fff" The above match condition matches packets with a source IP in 192.0.2.0/24 or 198.51.100.0/24 and a user-defined field named "ipv4_fragment_offset" with a value between 1 and 0x1fff inclusive.
"destIpRanges": [ # Destination IPv4/IPv6 addresses or CIDR prefixes, in standard text format.
"A String",
],
"destPorts": [ # Destination port numbers for TCP/UDP/SCTP. Each element can be a 16-bit unsigned decimal number (e.g. "80") or range (e.g. "0-1023").
"A String",
],
"ipProtocols": [ # IPv4 protocol / IPv6 next header (after extension headers). Each element can be an 8-bit unsigned decimal number (e.g. "6"), range (e.g. "253-254"), or one of the following protocol names: "tcp", "udp", "icmp", "esp", "ah", "ipip", or "sctp".
"A String",
],
"srcAsns": [ # BGP Autonomous System Number associated with the source IP address.
42,
],
"srcIpRanges": [ # Source IPv4/IPv6 addresses or CIDR prefixes, in standard text format.
"A String",
],
"srcPorts": [ # Source port numbers for TCP/UDP/SCTP. Each element can be a 16-bit unsigned decimal number (e.g. "80") or range (e.g. "0-1023").
"A String",
],
"srcRegionCodes": [ # Two-letter ISO 3166-1 alpha-2 country code associated with the source IP address.
"A String",
],
"userDefinedFields": [ # User-defined fields. Each element names a defined field and lists the matching values for that field.
{
"name": "A String", # Name of the user-defined field, as given in the definition.
"values": [ # Matching values of the field. Each element can be a 32-bit unsigned decimal or hexadecimal (starting with "0x") number (e.g. "64") or range (e.g. "0x400-0x7ff").
"A String",
],
},
],
},
"preconfiguredWafConfig": { # Preconfigured WAF configuration to be applied for the rule. If the rule does not evaluate preconfigured WAF rules, i.e., if evaluatePreconfiguredWaf() is not used, this field will have no effect.
"exclusions": [ # A list of exclusions to apply during preconfigured WAF evaluation.
{
"requestCookiesToExclude": [ # A list of request cookie names whose value will be excluded from inspection during preconfigured WAF evaluation.
{
"op": "A String", # The match operator for the field.
"val": "A String", # The value of the field.
},
],
"requestHeadersToExclude": [ # A list of request header names whose value will be excluded from inspection during preconfigured WAF evaluation.
{
"op": "A String", # The match operator for the field.
"val": "A String", # The value of the field.
},
],
"requestQueryParamsToExclude": [ # A list of request query parameter names whose value will be excluded from inspection during preconfigured WAF evaluation. Note that the parameter can be in the query string or in the POST body.
{
"op": "A String", # The match operator for the field.
"val": "A String", # The value of the field.
},
],
"requestUrisToExclude": [ # A list of request URIs from the request line to be excluded from inspection during preconfigured WAF evaluation. When specifying this field, the query or fragment part should be excluded.
{
"op": "A String", # The match operator for the field.
"val": "A String", # The value of the field.
},
],
"targetRuleIds": [ # A list of target rule IDs under the WAF rule set to apply the preconfigured WAF exclusion. If omitted, it refers to all the rule IDs under the WAF rule set.
"A String",
],
"targetRuleSet": "A String", # Target WAF rule set to apply the preconfigured WAF exclusion.
},
],
},
"preview": True or False, # If set to true, the specified action is not enforced.
"priority": 42, # An integer indicating the priority of a rule in the list. The priority must be a positive value between 0 and 2147483647. Rules are evaluated from highest to lowest priority where 0 is the highest priority and 2147483647 is the lowest priority.
"rateLimitOptions": { # Must be specified if the action is "rate_based_ban" or "throttle". Cannot be specified for any other actions.
"banDurationSec": 42, # Can only be specified if the action for the rule is "rate_based_ban". If specified, determines the time (in seconds) the traffic will continue to be banned by the rate limit after the rate falls below the threshold.
"banThreshold": { # Can only be specified if the action for the rule is "rate_based_ban". If specified, the key will be banned for the configured 'ban_duration_sec' when the number of requests that exceed the 'rate_limit_threshold' also exceed this 'ban_threshold'.
"count": 42, # Number of HTTP(S) requests for calculating the threshold.
"intervalSec": 42, # Interval over which the threshold is computed.
},
"conformAction": "A String", # Action to take for requests that are under the configured rate limit threshold. Valid option is "allow" only.
"enforceOnKey": "A String", # Determines the key to enforce the rate_limit_threshold on. Possible values are: - ALL: A single rate limit threshold is applied to all the requests matching this rule. This is the default value if "enforceOnKey" is not configured. - IP: The source IP address of the request is the key. Each IP has this limit enforced separately. - HTTP_HEADER: The value of the HTTP header whose name is configured under "enforceOnKeyName". The key value is truncated to the first 128 bytes of the header value. If no such header is present in the request, the key type defaults to ALL. - XFF_IP: The first IP address (i.e. the originating client IP address) specified in the list of IPs under X-Forwarded-For HTTP header. If no such header is present or the value is not a valid IP, the key defaults to the source IP address of the request i.e. key type IP. - HTTP_COOKIE: The value of the HTTP cookie whose name is configured under "enforceOnKeyName". The key value is truncated to the first 128 bytes of the cookie value. If no such cookie is present in the request, the key type defaults to ALL. - HTTP_PATH: The URL path of the HTTP request. The key value is truncated to the first 128 bytes. - SNI: Server name indication in the TLS session of the HTTPS request. The key value is truncated to the first 128 bytes. The key type defaults to ALL on a HTTP session. - REGION_CODE: The country/region from which the request originates.
"enforceOnKeyConfigs": [ # If specified, any combination of values of enforce_on_key_type/enforce_on_key_name is treated as the key on which ratelimit threshold/action is enforced. You can specify up to 3 enforce_on_key_configs. If enforce_on_key_configs is specified, enforce_on_key must not be specified.
{
"enforceOnKeyName": "A String", # Rate limit key name applicable only for the following key types: HTTP_HEADER -- Name of the HTTP header whose value is taken as the key value. HTTP_COOKIE -- Name of the HTTP cookie whose value is taken as the key value.
"enforceOnKeyType": "A String", # Determines the key to enforce the rate_limit_threshold on. Possible values are: - ALL: A single rate limit threshold is applied to all the requests matching this rule. This is the default value if "enforceOnKeyConfigs" is not configured. - IP: The source IP address of the request is the key. Each IP has this limit enforced separately. - HTTP_HEADER: The value of the HTTP header whose name is configured under "enforceOnKeyName". The key value is truncated to the first 128 bytes of the header value. If no such header is present in the request, the key type defaults to ALL. - XFF_IP: The first IP address (i.e. the originating client IP address) specified in the list of IPs under X-Forwarded-For HTTP header. If no such header is present or the value is not a valid IP, the key defaults to the source IP address of the request i.e. key type IP. - HTTP_COOKIE: The value of the HTTP cookie whose name is configured under "enforceOnKeyName". The key value is truncated to the first 128 bytes of the cookie value. If no such cookie is present in the request, the key type defaults to ALL. - HTTP_PATH: The URL path of the HTTP request. The key value is truncated to the first 128 bytes. - SNI: Server name indication in the TLS session of the HTTPS request. The key value is truncated to the first 128 bytes. The key type defaults to ALL on a HTTP session. - REGION_CODE: The country/region from which the request originates.
},
],
"enforceOnKeyName": "A String", # Rate limit key name applicable only for the following key types: HTTP_HEADER -- Name of the HTTP header whose value is taken as the key value. HTTP_COOKIE -- Name of the HTTP cookie whose value is taken as the key value.
"exceedAction": "A String", # Action to take for requests that are above the configured rate limit threshold, to either deny with a specified HTTP response code, or redirect to a different endpoint. Valid options are `deny(STATUS)`, where valid values for `STATUS` are 403, 404, 429, and 502, and `redirect`, where the redirect parameters come from `exceedRedirectOptions` below. The `redirect` action is only supported in Global Security Policies of type CLOUD_ARMOR.
"exceedRedirectOptions": { # Parameters defining the redirect action that is used as the exceed action. Cannot be specified if the exceed action is not redirect. This field is only supported in Global Security Policies of type CLOUD_ARMOR.
"target": "A String", # Target for the redirect action. This is required if the type is EXTERNAL_302 and cannot be specified for GOOGLE_RECAPTCHA.
"type": "A String", # Type of the redirect action.
},
"rateLimitThreshold": { # Threshold at which to begin ratelimiting.
"count": 42, # Number of HTTP(S) requests for calculating the threshold.
"intervalSec": 42, # Interval over which the threshold is computed.
},
},
"redirectOptions": { # Parameters defining the redirect action. Cannot be specified for any other actions. This field is only supported in Global Security Policies of type CLOUD_ARMOR.
"target": "A String", # Target for the redirect action. This is required if the type is EXTERNAL_302 and cannot be specified for GOOGLE_RECAPTCHA.
"type": "A String", # Type of the redirect action.
},
},
],
"selfLink": "A String", # [Output Only] Server-defined URL for the resource.
"type": "A String", # The type indicates the intended use of the security policy. - CLOUD_ARMOR: Cloud Armor backend security policies can be configured to filter incoming HTTP requests targeting backend services. They filter requests before they hit the origin servers. - CLOUD_ARMOR_EDGE: Cloud Armor edge security policies can be configured to filter incoming HTTP requests targeting backend services (including Cloud CDN-enabled) as well as backend buckets (Cloud Storage). They filter requests before the request is served from Google's cache. - CLOUD_ARMOR_INTERNAL_SERVICE: Cloud Armor internal service policies can be configured to filter HTTP requests targeting services managed by Traffic Director in a service mesh. They filter requests before the request is served from the application. - CLOUD_ARMOR_NETWORK: Cloud Armor network policies can be configured to filter packets targeting network load balancing resources such as backend services, target pools, target instances, and instances with external IPs. They filter requests before the request is served from the application. This field can be set only at resource creation time.
"userDefinedFields": [ # Definitions of user-defined fields for CLOUD_ARMOR_NETWORK policies. A user-defined field consists of up to 4 bytes extracted from a fixed offset in the packet, relative to the IPv4, IPv6, TCP, or UDP header, with an optional mask to select certain bits. Rules may then specify matching values for these fields. Example: userDefinedFields: - name: "ipv4_fragment_offset" base: IPV4 offset: 6 size: 2 mask: "0x1fff"
{
"base": "A String", # The base relative to which 'offset' is measured. Possible values are: - IPV4: Points to the beginning of the IPv4 header. - IPV6: Points to the beginning of the IPv6 header. - TCP: Points to the beginning of the TCP header, skipping over any IPv4 options or IPv6 extension headers. Not present for non-first fragments. - UDP: Points to the beginning of the UDP header, skipping over any IPv4 options or IPv6 extension headers. Not present for non-first fragments. required
"mask": "A String", # If specified, apply this mask (bitwise AND) to the field to ignore bits before matching. Encoded as a hexadecimal number (starting with "0x"). The last byte of the field (in network byte order) corresponds to the least significant byte of the mask.
"name": "A String", # The name of this field. Must be unique within the policy.
"offset": 42, # Offset of the first byte of the field (in network byte order) relative to 'base'.
"size": 42, # Size of the field in bytes. Valid values: 1-4.
},
],
}
getRule(project, region, securityPolicy, priority=None, x__xgafv=None)
Gets a rule at the specified priority.
Args:
project: string, Project ID for this request. (required)
region: string, Name of the region scoping this request. (required)
securityPolicy: string, Name of the security policy to which the queried rule belongs. (required)
priority: integer, The priority of the rule to get from the security policy.
x__xgafv: string, V1 error format.
Allowed values
1 - v1 error format
2 - v2 error format
Returns:
An object of the form:
{ # Represents a rule that describes one or more match conditions along with the action to be taken when traffic matches this condition (allow or deny).
"action": "A String", # The Action to perform when the rule is matched. The following are the valid actions: - allow: allow access to target. - deny(STATUS): deny access to target, returns the HTTP response code specified. Valid values for `STATUS` are 403, 404, and 502. - rate_based_ban: limit client traffic to the configured threshold and ban the client if the traffic exceeds the threshold. Configure parameters for this action in RateLimitOptions. Requires rate_limit_options to be set. - redirect: redirect to a different target. This can either be an internal reCAPTCHA redirect, or an external URL-based redirect via a 302 response. Parameters for this action can be configured via redirectOptions. This action is only supported in Global Security Policies of type CLOUD_ARMOR. - throttle: limit client traffic to the configured threshold. Configure parameters for this action in rateLimitOptions. Requires rate_limit_options to be set for this.
"description": "A String", # An optional description of this resource. Provide this property when you create the resource.
"headerAction": { # Optional, additional actions that are performed on headers. This field is only supported in Global Security Policies of type CLOUD_ARMOR.
"requestHeadersToAdds": [ # The list of request headers to add or overwrite if they're already present.
{
"headerName": "A String", # The name of the header to set.
"headerValue": "A String", # The value to set the named header to.
},
],
},
"kind": "compute#securityPolicyRule", # [Output only] Type of the resource. Always compute#securityPolicyRule for security policy rules
"match": { # Represents a match condition that incoming traffic is evaluated against. Exactly one field must be specified. # A match condition that incoming traffic is evaluated against. If it evaluates to true, the corresponding 'action' is enforced.
"config": { # The configuration options available when specifying versioned_expr. This field must be specified if versioned_expr is specified and cannot be specified if versioned_expr is not specified.
"srcIpRanges": [ # CIDR IP address range. Maximum number of src_ip_ranges allowed is 10.
"A String",
],
},
"expr": { # Represents a textual expression in the Common Expression Language (CEL) syntax. CEL is a C-like expression language. The syntax and semantics of CEL are documented at https://github.com/google/cel-spec. Example (Comparison): title: "Summary size limit" description: "Determines if a summary is less than 100 chars" expression: "document.summary.size() < 100" Example (Equality): title: "Requestor is owner" description: "Determines if requestor is the document owner" expression: "document.owner == request.auth.claims.email" Example (Logic): title: "Public documents" description: "Determine whether the document should be publicly visible" expression: "document.type != 'private' && document.type != 'internal'" Example (Data Manipulation): title: "Notification string" description: "Create a notification string with a timestamp." expression: "'New message received at ' + string(document.create_time)" The exact variables and functions that may be referenced within an expression are determined by the service that evaluates it. See the service documentation for additional information. # User defined CEVAL expression. A CEVAL expression is used to specify match criteria such as origin.ip, source.region_code and contents in the request header. Expressions containing `evaluateThreatIntelligence` require Cloud Armor Managed Protection Plus tier and are not supported in Edge Policies nor in Regional Policies. Expressions containing `evaluatePreconfiguredExpr('sourceiplist-*')` require Cloud Armor Managed Protection Plus tier and are only supported in Global Security Policies.
"description": "A String", # Optional. Description of the expression. This is a longer text which describes the expression, e.g. when hovered over it in a UI.
"expression": "A String", # Textual representation of an expression in Common Expression Language syntax.
"location": "A String", # Optional. String indicating the location of the expression for error reporting, e.g. a file name and a position in the file.
"title": "A String", # Optional. Title for the expression, i.e. a short string describing its purpose. This can be used e.g. in UIs which allow to enter the expression.
},
"versionedExpr": "A String", # Preconfigured versioned expression. If this field is specified, config must also be specified. Available preconfigured expressions along with their requirements are: SRC_IPS_V1 - must specify the corresponding src_ip_range field in config.
},
"networkMatch": { # Represents a match condition that incoming network traffic is evaluated against. # A match condition that incoming packets are evaluated against for CLOUD_ARMOR_NETWORK security policies. If it matches, the corresponding 'action' is enforced. The match criteria for a rule consists of built-in match fields (like 'srcIpRanges') and potentially multiple user-defined match fields ('userDefinedFields'). Field values may be extracted directly from the packet or derived from it (e.g. 'srcRegionCodes'). Some fields may not be present in every packet (e.g. 'srcPorts'). A user-defined field is only present if the base header is found in the packet and the entire field is in bounds. Each match field may specify which values can match it, listing one or more ranges, prefixes, or exact values that are considered a match for the field. A field value must be present in order to match a specified match field. If no match values are specified for a match field, then any field value is considered to match it, and it's not required to be present. For strings specifying '*' is also equivalent to match all. For a packet to match a rule, all specified match fields must match the corresponding field values derived from the packet. Example: networkMatch: srcIpRanges: - "192.0.2.0/24" - "198.51.100.0/24" userDefinedFields: - name: "ipv4_fragment_offset" values: - "1-0x1fff" The above match condition matches packets with a source IP in 192.0.2.0/24 or 198.51.100.0/24 and a user-defined field named "ipv4_fragment_offset" with a value between 1 and 0x1fff inclusive.
"destIpRanges": [ # Destination IPv4/IPv6 addresses or CIDR prefixes, in standard text format.
"A String",
],
"destPorts": [ # Destination port numbers for TCP/UDP/SCTP. Each element can be a 16-bit unsigned decimal number (e.g. "80") or range (e.g. "0-1023").
"A String",
],
"ipProtocols": [ # IPv4 protocol / IPv6 next header (after extension headers). Each element can be an 8-bit unsigned decimal number (e.g. "6"), range (e.g. "253-254"), or one of the following protocol names: "tcp", "udp", "icmp", "esp", "ah", "ipip", or "sctp".
"A String",
],
"srcAsns": [ # BGP Autonomous System Number associated with the source IP address.
42,
],
"srcIpRanges": [ # Source IPv4/IPv6 addresses or CIDR prefixes, in standard text format.
"A String",
],
"srcPorts": [ # Source port numbers for TCP/UDP/SCTP. Each element can be a 16-bit unsigned decimal number (e.g. "80") or range (e.g. "0-1023").
"A String",
],
"srcRegionCodes": [ # Two-letter ISO 3166-1 alpha-2 country code associated with the source IP address.
"A String",
],
"userDefinedFields": [ # User-defined fields. Each element names a defined field and lists the matching values for that field.
{
"name": "A String", # Name of the user-defined field, as given in the definition.
"values": [ # Matching values of the field. Each element can be a 32-bit unsigned decimal or hexadecimal (starting with "0x") number (e.g. "64") or range (e.g. "0x400-0x7ff").
"A String",
],
},
],
},
"preconfiguredWafConfig": { # Preconfigured WAF configuration to be applied for the rule. If the rule does not evaluate preconfigured WAF rules, i.e., if evaluatePreconfiguredWaf() is not used, this field will have no effect.
"exclusions": [ # A list of exclusions to apply during preconfigured WAF evaluation.
{
"requestCookiesToExclude": [ # A list of request cookie names whose value will be excluded from inspection during preconfigured WAF evaluation.
{
"op": "A String", # The match operator for the field.
"val": "A String", # The value of the field.
},
],
"requestHeadersToExclude": [ # A list of request header names whose value will be excluded from inspection during preconfigured WAF evaluation.
{
"op": "A String", # The match operator for the field.
"val": "A String", # The value of the field.
},
],
"requestQueryParamsToExclude": [ # A list of request query parameter names whose value will be excluded from inspection during preconfigured WAF evaluation. Note that the parameter can be in the query string or in the POST body.
{
"op": "A String", # The match operator for the field.
"val": "A String", # The value of the field.
},
],
"requestUrisToExclude": [ # A list of request URIs from the request line to be excluded from inspection during preconfigured WAF evaluation. When specifying this field, the query or fragment part should be excluded.
{
"op": "A String", # The match operator for the field.
"val": "A String", # The value of the field.
},
],
"targetRuleIds": [ # A list of target rule IDs under the WAF rule set to apply the preconfigured WAF exclusion. If omitted, it refers to all the rule IDs under the WAF rule set.
"A String",
],
"targetRuleSet": "A String", # Target WAF rule set to apply the preconfigured WAF exclusion.
},
],
},
"preview": True or False, # If set to true, the specified action is not enforced.
"priority": 42, # An integer indicating the priority of a rule in the list. The priority must be a positive value between 0 and 2147483647. Rules are evaluated from highest to lowest priority where 0 is the highest priority and 2147483647 is the lowest priority.
"rateLimitOptions": { # Must be specified if the action is "rate_based_ban" or "throttle". Cannot be specified for any other actions.
"banDurationSec": 42, # Can only be specified if the action for the rule is "rate_based_ban". If specified, determines the time (in seconds) the traffic will continue to be banned by the rate limit after the rate falls below the threshold.
"banThreshold": { # Can only be specified if the action for the rule is "rate_based_ban". If specified, the key will be banned for the configured 'ban_duration_sec' when the number of requests that exceed the 'rate_limit_threshold' also exceed this 'ban_threshold'.
"count": 42, # Number of HTTP(S) requests for calculating the threshold.
"intervalSec": 42, # Interval over which the threshold is computed.
},
"conformAction": "A String", # Action to take for requests that are under the configured rate limit threshold. Valid option is "allow" only.
"enforceOnKey": "A String", # Determines the key to enforce the rate_limit_threshold on. Possible values are: - ALL: A single rate limit threshold is applied to all the requests matching this rule. This is the default value if "enforceOnKey" is not configured. - IP: The source IP address of the request is the key. Each IP has this limit enforced separately. - HTTP_HEADER: The value of the HTTP header whose name is configured under "enforceOnKeyName". The key value is truncated to the first 128 bytes of the header value. If no such header is present in the request, the key type defaults to ALL. - XFF_IP: The first IP address (i.e. the originating client IP address) specified in the list of IPs under X-Forwarded-For HTTP header. If no such header is present or the value is not a valid IP, the key defaults to the source IP address of the request i.e. key type IP. - HTTP_COOKIE: The value of the HTTP cookie whose name is configured under "enforceOnKeyName". The key value is truncated to the first 128 bytes of the cookie value. If no such cookie is present in the request, the key type defaults to ALL. - HTTP_PATH: The URL path of the HTTP request. The key value is truncated to the first 128 bytes. - SNI: Server name indication in the TLS session of the HTTPS request. The key value is truncated to the first 128 bytes. The key type defaults to ALL on a HTTP session. - REGION_CODE: The country/region from which the request originates.
"enforceOnKeyConfigs": [ # If specified, any combination of values of enforce_on_key_type/enforce_on_key_name is treated as the key on which ratelimit threshold/action is enforced. You can specify up to 3 enforce_on_key_configs. If enforce_on_key_configs is specified, enforce_on_key must not be specified.
{
"enforceOnKeyName": "A String", # Rate limit key name applicable only for the following key types: HTTP_HEADER -- Name of the HTTP header whose value is taken as the key value. HTTP_COOKIE -- Name of the HTTP cookie whose value is taken as the key value.
"enforceOnKeyType": "A String", # Determines the key to enforce the rate_limit_threshold on. Possible values are: - ALL: A single rate limit threshold is applied to all the requests matching this rule. This is the default value if "enforceOnKeyConfigs" is not configured. - IP: The source IP address of the request is the key. Each IP has this limit enforced separately. - HTTP_HEADER: The value of the HTTP header whose name is configured under "enforceOnKeyName". The key value is truncated to the first 128 bytes of the header value. If no such header is present in the request, the key type defaults to ALL. - XFF_IP: The first IP address (i.e. the originating client IP address) specified in the list of IPs under X-Forwarded-For HTTP header. If no such header is present or the value is not a valid IP, the key defaults to the source IP address of the request i.e. key type IP. - HTTP_COOKIE: The value of the HTTP cookie whose name is configured under "enforceOnKeyName". The key value is truncated to the first 128 bytes of the cookie value. If no such cookie is present in the request, the key type defaults to ALL. - HTTP_PATH: The URL path of the HTTP request. The key value is truncated to the first 128 bytes. - SNI: Server name indication in the TLS session of the HTTPS request. The key value is truncated to the first 128 bytes. The key type defaults to ALL on a HTTP session. - REGION_CODE: The country/region from which the request originates.
},
],
"enforceOnKeyName": "A String", # Rate limit key name applicable only for the following key types: HTTP_HEADER -- Name of the HTTP header whose value is taken as the key value. HTTP_COOKIE -- Name of the HTTP cookie whose value is taken as the key value.
"exceedAction": "A String", # Action to take for requests that are above the configured rate limit threshold, to either deny with a specified HTTP response code, or redirect to a different endpoint. Valid options are `deny(STATUS)`, where valid values for `STATUS` are 403, 404, 429, and 502, and `redirect`, where the redirect parameters come from `exceedRedirectOptions` below. The `redirect` action is only supported in Global Security Policies of type CLOUD_ARMOR.
"exceedRedirectOptions": { # Parameters defining the redirect action that is used as the exceed action. Cannot be specified if the exceed action is not redirect. This field is only supported in Global Security Policies of type CLOUD_ARMOR.
"target": "A String", # Target for the redirect action. This is required if the type is EXTERNAL_302 and cannot be specified for GOOGLE_RECAPTCHA.
"type": "A String", # Type of the redirect action.
},
"rateLimitThreshold": { # Threshold at which to begin ratelimiting.
"count": 42, # Number of HTTP(S) requests for calculating the threshold.
"intervalSec": 42, # Interval over which the threshold is computed.
},
},
"redirectOptions": { # Parameters defining the redirect action. Cannot be specified for any other actions. This field is only supported in Global Security Policies of type CLOUD_ARMOR.
"target": "A String", # Target for the redirect action. This is required if the type is EXTERNAL_302 and cannot be specified for GOOGLE_RECAPTCHA.
"type": "A String", # Type of the redirect action.
},
}
insert(project, region, body=None, requestId=None, validateOnly=None, x__xgafv=None)
Creates a new policy in the specified project using the data included in the request.
Args:
project: string, Project ID for this request. (required)
region: string, Name of the region scoping this request. (required)
body: object, The request body.
The object takes the form of:
{ # Represents a Google Cloud Armor security policy resource. Only external backend services that use load balancers can reference a security policy. For more information, see Google Cloud Armor security policy overview.
"adaptiveProtectionConfig": { # Configuration options for Cloud Armor Adaptive Protection (CAAP).
"layer7DdosDefenseConfig": { # Configuration options for L7 DDoS detection. This field is only supported in Global Security Policies of type CLOUD_ARMOR. # If set to true, enables Cloud Armor Machine Learning.
"enable": True or False, # If set to true, enables CAAP for L7 DDoS detection. This field is only supported in Global Security Policies of type CLOUD_ARMOR.
"ruleVisibility": "A String", # Rule visibility can be one of the following: STANDARD - opaque rules. (default) PREMIUM - transparent rules. This field is only supported in Global Security Policies of type CLOUD_ARMOR.
"thresholdConfigs": [ # Configuration options for layer7 adaptive protection for various customizable thresholds.
{
"autoDeployConfidenceThreshold": 3.14,
"autoDeployExpirationSec": 42,
"autoDeployImpactedBaselineThreshold": 3.14,
"autoDeployLoadThreshold": 3.14,
"name": "A String", # The name must be 1-63 characters long, and comply with RFC1035. The name must be unique within the security policy.
},
],
},
},
"advancedOptionsConfig": {
"jsonCustomConfig": { # Custom configuration to apply the JSON parsing. Only applicable when json_parsing is set to STANDARD.
"contentTypes": [ # A list of custom Content-Type header values to apply the JSON parsing. As per RFC 1341, a Content-Type header value has the following format: Content-Type := type "/" subtype *[";" parameter] When configuring a custom Content-Type header value, only the type/subtype needs to be specified, and the parameters should be excluded.
"A String",
],
},
"jsonParsing": "A String",
"logLevel": "A String",
"userIpRequestHeaders": [ # An optional list of case-insensitive request header names to use for resolving the callers client IP address.
"A String",
],
},
"creationTimestamp": "A String", # [Output Only] Creation timestamp in RFC3339 text format.
"ddosProtectionConfig": {
"ddosProtection": "A String",
},
"description": "A String", # An optional description of this resource. Provide this property when you create the resource.
"fingerprint": "A String", # Specifies a fingerprint for this resource, which is essentially a hash of the metadata's contents and used for optimistic locking. The fingerprint is initially generated by Compute Engine and changes after every request to modify or update metadata. You must always provide an up-to-date fingerprint hash in order to update or change metadata, otherwise the request will fail with error 412 conditionNotMet. To see the latest fingerprint, make get() request to the security policy.
"id": "A String", # [Output Only] The unique identifier for the resource. This identifier is defined by the server.
"kind": "compute#securityPolicy", # [Output only] Type of the resource. Always compute#securityPolicyfor security policies
"labelFingerprint": "A String", # A fingerprint for the labels being applied to this security policy, which is essentially a hash of the labels set used for optimistic locking. The fingerprint is initially generated by Compute Engine and changes after every request to modify or update labels. You must always provide an up-to-date fingerprint hash in order to update or change labels. To see the latest fingerprint, make get() request to the security policy.
"labels": { # Labels for this resource. These can only be added or modified by the setLabels method. Each label key/value pair must comply with RFC1035. Label values may be empty.
"a_key": "A String",
},
"name": "A String", # Name of the resource. Provided by the client when the resource is created. The name must be 1-63 characters long, and comply with RFC1035. Specifically, the name must be 1-63 characters long and match the regular expression `[a-z]([-a-z0-9]*[a-z0-9])?` which means the first character must be a lowercase letter, and all following characters must be a dash, lowercase letter, or digit, except the last character, which cannot be a dash.
"recaptchaOptionsConfig": {
"redirectSiteKey": "A String", # An optional field to supply a reCAPTCHA site key to be used for all the rules using the redirect action with the type of GOOGLE_RECAPTCHA under the security policy. The specified site key needs to be created from the reCAPTCHA API. The user is responsible for the validity of the specified site key. If not specified, a Google-managed site key is used. This field is only supported in Global Security Policies of type CLOUD_ARMOR.
},
"region": "A String", # [Output Only] URL of the region where the regional security policy resides. This field is not applicable to global security policies.
"rules": [ # A list of rules that belong to this policy. There must always be a default rule which is a rule with priority 2147483647 and match all condition (for the match condition this means match "*" for srcIpRanges and for the networkMatch condition every field must be either match "*" or not set). If no rules are provided when creating a security policy, a default rule with action "allow" will be added.
{ # Represents a rule that describes one or more match conditions along with the action to be taken when traffic matches this condition (allow or deny).
"action": "A String", # The Action to perform when the rule is matched. The following are the valid actions: - allow: allow access to target. - deny(STATUS): deny access to target, returns the HTTP response code specified. Valid values for `STATUS` are 403, 404, and 502. - rate_based_ban: limit client traffic to the configured threshold and ban the client if the traffic exceeds the threshold. Configure parameters for this action in RateLimitOptions. Requires rate_limit_options to be set. - redirect: redirect to a different target. This can either be an internal reCAPTCHA redirect, or an external URL-based redirect via a 302 response. Parameters for this action can be configured via redirectOptions. This action is only supported in Global Security Policies of type CLOUD_ARMOR. - throttle: limit client traffic to the configured threshold. Configure parameters for this action in rateLimitOptions. Requires rate_limit_options to be set for this.
"description": "A String", # An optional description of this resource. Provide this property when you create the resource.
"headerAction": { # Optional, additional actions that are performed on headers. This field is only supported in Global Security Policies of type CLOUD_ARMOR.
"requestHeadersToAdds": [ # The list of request headers to add or overwrite if they're already present.
{
"headerName": "A String", # The name of the header to set.
"headerValue": "A String", # The value to set the named header to.
},
],
},
"kind": "compute#securityPolicyRule", # [Output only] Type of the resource. Always compute#securityPolicyRule for security policy rules
"match": { # Represents a match condition that incoming traffic is evaluated against. Exactly one field must be specified. # A match condition that incoming traffic is evaluated against. If it evaluates to true, the corresponding 'action' is enforced.
"config": { # The configuration options available when specifying versioned_expr. This field must be specified if versioned_expr is specified and cannot be specified if versioned_expr is not specified.
"srcIpRanges": [ # CIDR IP address range. Maximum number of src_ip_ranges allowed is 10.
"A String",
],
},
"expr": { # Represents a textual expression in the Common Expression Language (CEL) syntax. CEL is a C-like expression language. The syntax and semantics of CEL are documented at https://github.com/google/cel-spec. Example (Comparison): title: "Summary size limit" description: "Determines if a summary is less than 100 chars" expression: "document.summary.size() < 100" Example (Equality): title: "Requestor is owner" description: "Determines if requestor is the document owner" expression: "document.owner == request.auth.claims.email" Example (Logic): title: "Public documents" description: "Determine whether the document should be publicly visible" expression: "document.type != 'private' && document.type != 'internal'" Example (Data Manipulation): title: "Notification string" description: "Create a notification string with a timestamp." expression: "'New message received at ' + string(document.create_time)" The exact variables and functions that may be referenced within an expression are determined by the service that evaluates it. See the service documentation for additional information. # User defined CEVAL expression. A CEVAL expression is used to specify match criteria such as origin.ip, source.region_code and contents in the request header. Expressions containing `evaluateThreatIntelligence` require Cloud Armor Managed Protection Plus tier and are not supported in Edge Policies nor in Regional Policies. Expressions containing `evaluatePreconfiguredExpr('sourceiplist-*')` require Cloud Armor Managed Protection Plus tier and are only supported in Global Security Policies.
"description": "A String", # Optional. Description of the expression. This is a longer text which describes the expression, e.g. when hovered over it in a UI.
"expression": "A String", # Textual representation of an expression in Common Expression Language syntax.
"location": "A String", # Optional. String indicating the location of the expression for error reporting, e.g. a file name and a position in the file.
"title": "A String", # Optional. Title for the expression, i.e. a short string describing its purpose. This can be used e.g. in UIs which allow to enter the expression.
},
"versionedExpr": "A String", # Preconfigured versioned expression. If this field is specified, config must also be specified. Available preconfigured expressions along with their requirements are: SRC_IPS_V1 - must specify the corresponding src_ip_range field in config.
},
"networkMatch": { # Represents a match condition that incoming network traffic is evaluated against. # A match condition that incoming packets are evaluated against for CLOUD_ARMOR_NETWORK security policies. If it matches, the corresponding 'action' is enforced. The match criteria for a rule consists of built-in match fields (like 'srcIpRanges') and potentially multiple user-defined match fields ('userDefinedFields'). Field values may be extracted directly from the packet or derived from it (e.g. 'srcRegionCodes'). Some fields may not be present in every packet (e.g. 'srcPorts'). A user-defined field is only present if the base header is found in the packet and the entire field is in bounds. Each match field may specify which values can match it, listing one or more ranges, prefixes, or exact values that are considered a match for the field. A field value must be present in order to match a specified match field. If no match values are specified for a match field, then any field value is considered to match it, and it's not required to be present. For strings specifying '*' is also equivalent to match all. For a packet to match a rule, all specified match fields must match the corresponding field values derived from the packet. Example: networkMatch: srcIpRanges: - "192.0.2.0/24" - "198.51.100.0/24" userDefinedFields: - name: "ipv4_fragment_offset" values: - "1-0x1fff" The above match condition matches packets with a source IP in 192.0.2.0/24 or 198.51.100.0/24 and a user-defined field named "ipv4_fragment_offset" with a value between 1 and 0x1fff inclusive.
"destIpRanges": [ # Destination IPv4/IPv6 addresses or CIDR prefixes, in standard text format.
"A String",
],
"destPorts": [ # Destination port numbers for TCP/UDP/SCTP. Each element can be a 16-bit unsigned decimal number (e.g. "80") or range (e.g. "0-1023").
"A String",
],
"ipProtocols": [ # IPv4 protocol / IPv6 next header (after extension headers). Each element can be an 8-bit unsigned decimal number (e.g. "6"), range (e.g. "253-254"), or one of the following protocol names: "tcp", "udp", "icmp", "esp", "ah", "ipip", or "sctp".
"A String",
],
"srcAsns": [ # BGP Autonomous System Number associated with the source IP address.
42,
],
"srcIpRanges": [ # Source IPv4/IPv6 addresses or CIDR prefixes, in standard text format.
"A String",
],
"srcPorts": [ # Source port numbers for TCP/UDP/SCTP. Each element can be a 16-bit unsigned decimal number (e.g. "80") or range (e.g. "0-1023").
"A String",
],
"srcRegionCodes": [ # Two-letter ISO 3166-1 alpha-2 country code associated with the source IP address.
"A String",
],
"userDefinedFields": [ # User-defined fields. Each element names a defined field and lists the matching values for that field.
{
"name": "A String", # Name of the user-defined field, as given in the definition.
"values": [ # Matching values of the field. Each element can be a 32-bit unsigned decimal or hexadecimal (starting with "0x") number (e.g. "64") or range (e.g. "0x400-0x7ff").
"A String",
],
},
],
},
"preconfiguredWafConfig": { # Preconfigured WAF configuration to be applied for the rule. If the rule does not evaluate preconfigured WAF rules, i.e., if evaluatePreconfiguredWaf() is not used, this field will have no effect.
"exclusions": [ # A list of exclusions to apply during preconfigured WAF evaluation.
{
"requestCookiesToExclude": [ # A list of request cookie names whose value will be excluded from inspection during preconfigured WAF evaluation.
{
"op": "A String", # The match operator for the field.
"val": "A String", # The value of the field.
},
],
"requestHeadersToExclude": [ # A list of request header names whose value will be excluded from inspection during preconfigured WAF evaluation.
{
"op": "A String", # The match operator for the field.
"val": "A String", # The value of the field.
},
],
"requestQueryParamsToExclude": [ # A list of request query parameter names whose value will be excluded from inspection during preconfigured WAF evaluation. Note that the parameter can be in the query string or in the POST body.
{
"op": "A String", # The match operator for the field.
"val": "A String", # The value of the field.
},
],
"requestUrisToExclude": [ # A list of request URIs from the request line to be excluded from inspection during preconfigured WAF evaluation. When specifying this field, the query or fragment part should be excluded.
{
"op": "A String", # The match operator for the field.
"val": "A String", # The value of the field.
},
],
"targetRuleIds": [ # A list of target rule IDs under the WAF rule set to apply the preconfigured WAF exclusion. If omitted, it refers to all the rule IDs under the WAF rule set.
"A String",
],
"targetRuleSet": "A String", # Target WAF rule set to apply the preconfigured WAF exclusion.
},
],
},
"preview": True or False, # If set to true, the specified action is not enforced.
"priority": 42, # An integer indicating the priority of a rule in the list. The priority must be a positive value between 0 and 2147483647. Rules are evaluated from highest to lowest priority where 0 is the highest priority and 2147483647 is the lowest priority.
"rateLimitOptions": { # Must be specified if the action is "rate_based_ban" or "throttle". Cannot be specified for any other actions.
"banDurationSec": 42, # Can only be specified if the action for the rule is "rate_based_ban". If specified, determines the time (in seconds) the traffic will continue to be banned by the rate limit after the rate falls below the threshold.
"banThreshold": { # Can only be specified if the action for the rule is "rate_based_ban". If specified, the key will be banned for the configured 'ban_duration_sec' when the number of requests that exceed the 'rate_limit_threshold' also exceed this 'ban_threshold'.
"count": 42, # Number of HTTP(S) requests for calculating the threshold.
"intervalSec": 42, # Interval over which the threshold is computed.
},
"conformAction": "A String", # Action to take for requests that are under the configured rate limit threshold. Valid option is "allow" only.
"enforceOnKey": "A String", # Determines the key to enforce the rate_limit_threshold on. Possible values are: - ALL: A single rate limit threshold is applied to all the requests matching this rule. This is the default value if "enforceOnKey" is not configured. - IP: The source IP address of the request is the key. Each IP has this limit enforced separately. - HTTP_HEADER: The value of the HTTP header whose name is configured under "enforceOnKeyName". The key value is truncated to the first 128 bytes of the header value. If no such header is present in the request, the key type defaults to ALL. - XFF_IP: The first IP address (i.e. the originating client IP address) specified in the list of IPs under X-Forwarded-For HTTP header. If no such header is present or the value is not a valid IP, the key defaults to the source IP address of the request i.e. key type IP. - HTTP_COOKIE: The value of the HTTP cookie whose name is configured under "enforceOnKeyName". The key value is truncated to the first 128 bytes of the cookie value. If no such cookie is present in the request, the key type defaults to ALL. - HTTP_PATH: The URL path of the HTTP request. The key value is truncated to the first 128 bytes. - SNI: Server name indication in the TLS session of the HTTPS request. The key value is truncated to the first 128 bytes. The key type defaults to ALL on a HTTP session. - REGION_CODE: The country/region from which the request originates.
"enforceOnKeyConfigs": [ # If specified, any combination of values of enforce_on_key_type/enforce_on_key_name is treated as the key on which ratelimit threshold/action is enforced. You can specify up to 3 enforce_on_key_configs. If enforce_on_key_configs is specified, enforce_on_key must not be specified.
{
"enforceOnKeyName": "A String", # Rate limit key name applicable only for the following key types: HTTP_HEADER -- Name of the HTTP header whose value is taken as the key value. HTTP_COOKIE -- Name of the HTTP cookie whose value is taken as the key value.
"enforceOnKeyType": "A String", # Determines the key to enforce the rate_limit_threshold on. Possible values are: - ALL: A single rate limit threshold is applied to all the requests matching this rule. This is the default value if "enforceOnKeyConfigs" is not configured. - IP: The source IP address of the request is the key. Each IP has this limit enforced separately. - HTTP_HEADER: The value of the HTTP header whose name is configured under "enforceOnKeyName". The key value is truncated to the first 128 bytes of the header value. If no such header is present in the request, the key type defaults to ALL. - XFF_IP: The first IP address (i.e. the originating client IP address) specified in the list of IPs under X-Forwarded-For HTTP header. If no such header is present or the value is not a valid IP, the key defaults to the source IP address of the request i.e. key type IP. - HTTP_COOKIE: The value of the HTTP cookie whose name is configured under "enforceOnKeyName". The key value is truncated to the first 128 bytes of the cookie value. If no such cookie is present in the request, the key type defaults to ALL. - HTTP_PATH: The URL path of the HTTP request. The key value is truncated to the first 128 bytes. - SNI: Server name indication in the TLS session of the HTTPS request. The key value is truncated to the first 128 bytes. The key type defaults to ALL on a HTTP session. - REGION_CODE: The country/region from which the request originates.
},
],
"enforceOnKeyName": "A String", # Rate limit key name applicable only for the following key types: HTTP_HEADER -- Name of the HTTP header whose value is taken as the key value. HTTP_COOKIE -- Name of the HTTP cookie whose value is taken as the key value.
"exceedAction": "A String", # Action to take for requests that are above the configured rate limit threshold, to either deny with a specified HTTP response code, or redirect to a different endpoint. Valid options are `deny(STATUS)`, where valid values for `STATUS` are 403, 404, 429, and 502, and `redirect`, where the redirect parameters come from `exceedRedirectOptions` below. The `redirect` action is only supported in Global Security Policies of type CLOUD_ARMOR.
"exceedRedirectOptions": { # Parameters defining the redirect action that is used as the exceed action. Cannot be specified if the exceed action is not redirect. This field is only supported in Global Security Policies of type CLOUD_ARMOR.
"target": "A String", # Target for the redirect action. This is required if the type is EXTERNAL_302 and cannot be specified for GOOGLE_RECAPTCHA.
"type": "A String", # Type of the redirect action.
},
"rateLimitThreshold": { # Threshold at which to begin ratelimiting.
"count": 42, # Number of HTTP(S) requests for calculating the threshold.
"intervalSec": 42, # Interval over which the threshold is computed.
},
},
"redirectOptions": { # Parameters defining the redirect action. Cannot be specified for any other actions. This field is only supported in Global Security Policies of type CLOUD_ARMOR.
"target": "A String", # Target for the redirect action. This is required if the type is EXTERNAL_302 and cannot be specified for GOOGLE_RECAPTCHA.
"type": "A String", # Type of the redirect action.
},
},
],
"selfLink": "A String", # [Output Only] Server-defined URL for the resource.
"type": "A String", # The type indicates the intended use of the security policy. - CLOUD_ARMOR: Cloud Armor backend security policies can be configured to filter incoming HTTP requests targeting backend services. They filter requests before they hit the origin servers. - CLOUD_ARMOR_EDGE: Cloud Armor edge security policies can be configured to filter incoming HTTP requests targeting backend services (including Cloud CDN-enabled) as well as backend buckets (Cloud Storage). They filter requests before the request is served from Google's cache. - CLOUD_ARMOR_INTERNAL_SERVICE: Cloud Armor internal service policies can be configured to filter HTTP requests targeting services managed by Traffic Director in a service mesh. They filter requests before the request is served from the application. - CLOUD_ARMOR_NETWORK: Cloud Armor network policies can be configured to filter packets targeting network load balancing resources such as backend services, target pools, target instances, and instances with external IPs. They filter requests before the request is served from the application. This field can be set only at resource creation time.
"userDefinedFields": [ # Definitions of user-defined fields for CLOUD_ARMOR_NETWORK policies. A user-defined field consists of up to 4 bytes extracted from a fixed offset in the packet, relative to the IPv4, IPv6, TCP, or UDP header, with an optional mask to select certain bits. Rules may then specify matching values for these fields. Example: userDefinedFields: - name: "ipv4_fragment_offset" base: IPV4 offset: 6 size: 2 mask: "0x1fff"
{
"base": "A String", # The base relative to which 'offset' is measured. Possible values are: - IPV4: Points to the beginning of the IPv4 header. - IPV6: Points to the beginning of the IPv6 header. - TCP: Points to the beginning of the TCP header, skipping over any IPv4 options or IPv6 extension headers. Not present for non-first fragments. - UDP: Points to the beginning of the UDP header, skipping over any IPv4 options or IPv6 extension headers. Not present for non-first fragments. required
"mask": "A String", # If specified, apply this mask (bitwise AND) to the field to ignore bits before matching. Encoded as a hexadecimal number (starting with "0x"). The last byte of the field (in network byte order) corresponds to the least significant byte of the mask.
"name": "A String", # The name of this field. Must be unique within the policy.
"offset": 42, # Offset of the first byte of the field (in network byte order) relative to 'base'.
"size": 42, # Size of the field in bytes. Valid values: 1-4.
},
],
}
requestId: string, An optional request ID to identify requests. Specify a unique request ID so that if you must retry your request, the server will know to ignore the request if it has already been completed. For example, consider a situation where you make an initial request and the request times out. If you make the request again with the same request ID, the server can check if original operation with the same request ID was received, and if so, will ignore the second request. This prevents clients from accidentally creating duplicate commitments. The request ID must be a valid UUID with the exception that zero UUID is not supported ( 00000000-0000-0000-0000-000000000000).
validateOnly: boolean, If true, the request will not be committed.
x__xgafv: string, V1 error format.
Allowed values
1 - v1 error format
2 - v2 error format
Returns:
An object of the form:
{ # Represents an Operation resource. Google Compute Engine has three Operation resources: * [Global](/compute/docs/reference/rest/v1/globalOperations) * [Regional](/compute/docs/reference/rest/v1/regionOperations) * [Zonal](/compute/docs/reference/rest/v1/zoneOperations) You can use an operation resource to manage asynchronous API requests. For more information, read Handling API responses. Operations can be global, regional or zonal. - For global operations, use the `globalOperations` resource. - For regional operations, use the `regionOperations` resource. - For zonal operations, use the `zoneOperations` resource. For more information, read Global, Regional, and Zonal Resources.
"clientOperationId": "A String", # [Output Only] The value of `requestId` if you provided it in the request. Not present otherwise.
"creationTimestamp": "A String", # [Deprecated] This field is deprecated.
"description": "A String", # [Output Only] A textual description of the operation, which is set when the operation is created.
"endTime": "A String", # [Output Only] The time that this operation was completed. This value is in RFC3339 text format.
"error": { # [Output Only] If errors are generated during processing of the operation, this field will be populated.
"errors": [ # [Output Only] The array of errors encountered while processing this operation.
{
"code": "A String", # [Output Only] The error type identifier for this error.
"errorDetails": [ # [Output Only] An optional list of messages that contain the error details. There is a set of defined message types to use for providing details.The syntax depends on the error code. For example, QuotaExceededInfo will have details when the error code is QUOTA_EXCEEDED.
{
"errorInfo": { # Describes the cause of the error with structured details. Example of an error when contacting the "pubsub.googleapis.com" API when it is not enabled: { "reason": "API_DISABLED" "domain": "googleapis.com" "metadata": { "resource": "projects/123", "service": "pubsub.googleapis.com" } } This response indicates that the pubsub.googleapis.com API is not enabled. Example of an error that is returned when attempting to create a Spanner instance in a region that is out of stock: { "reason": "STOCKOUT" "domain": "spanner.googleapis.com", "metadata": { "availableRegions": "us-central1,us-east2" } }
"domain": "A String", # The logical grouping to which the "reason" belongs. The error domain is typically the registered service name of the tool or product that generates the error. Example: "pubsub.googleapis.com". If the error is generated by some common infrastructure, the error domain must be a globally unique value that identifies the infrastructure. For Google API infrastructure, the error domain is "googleapis.com".
"metadatas": { # Additional structured details about this error. Keys should match /[a-zA-Z0-9-_]/ and be limited to 64 characters in length. When identifying the current value of an exceeded limit, the units should be contained in the key, not the value. For example, rather than {"instanceLimit": "100/request"}, should be returned as, {"instanceLimitPerRequest": "100"}, if the client exceeds the number of instances that can be created in a single (batch) request.
"a_key": "A String",
},
"reason": "A String", # The reason of the error. This is a constant value that identifies the proximate cause of the error. Error reasons are unique within a particular domain of errors. This should be at most 63 characters and match a regular expression of `A-Z+[A-Z0-9]`, which represents UPPER_SNAKE_CASE.
},
"help": { # Provides links to documentation or for performing an out of band action. For example, if a quota check failed with an error indicating the calling project hasn't enabled the accessed service, this can contain a URL pointing directly to the right place in the developer console to flip the bit.
"links": [ # URL(s) pointing to additional information on handling the current error.
{ # Describes a URL link.
"description": "A String", # Describes what the link offers.
"url": "A String", # The URL of the link.
},
],
},
"localizedMessage": { # Provides a localized error message that is safe to return to the user which can be attached to an RPC error.
"locale": "A String", # The locale used following the specification defined at https://www.rfc-editor.org/rfc/bcp/bcp47.txt. Examples are: "en-US", "fr-CH", "es-MX"
"message": "A String", # The localized error message in the above locale.
},
"quotaInfo": { # Additional details for quota exceeded error for resource quota.
"dimensions": { # The map holding related quota dimensions.
"a_key": "A String",
},
"futureLimit": 3.14, # Future quota limit being rolled out. The limit's unit depends on the quota type or metric.
"limit": 3.14, # Current effective quota limit. The limit's unit depends on the quota type or metric.
"limitName": "A String", # The name of the quota limit.
"metricName": "A String", # The Compute Engine quota metric name.
"rolloutStatus": "A String", # Rollout status of the future quota limit.
},
},
],
"location": "A String", # [Output Only] Indicates the field in the request that caused the error. This property is optional.
"message": "A String", # [Output Only] An optional, human-readable error message.
},
],
},
"httpErrorMessage": "A String", # [Output Only] If the operation fails, this field contains the HTTP error message that was returned, such as `NOT FOUND`.
"httpErrorStatusCode": 42, # [Output Only] If the operation fails, this field contains the HTTP error status code that was returned. For example, a `404` means the resource was not found.
"id": "A String", # [Output Only] The unique identifier for the operation. This identifier is defined by the server.
"insertTime": "A String", # [Output Only] The time that this operation was requested. This value is in RFC3339 text format.
"instancesBulkInsertOperationMetadata": {
"perLocationStatus": { # Status information per location (location name is key). Example key: zones/us-central1-a
"a_key": {
"createdVmCount": 42, # [Output Only] Count of VMs successfully created so far.
"deletedVmCount": 42, # [Output Only] Count of VMs that got deleted during rollback.
"failedToCreateVmCount": 42, # [Output Only] Count of VMs that started creating but encountered an error.
"status": "A String", # [Output Only] Creation status of BulkInsert operation - information if the flow is rolling forward or rolling back.
"targetVmCount": 42, # [Output Only] Count of VMs originally planned to be created.
},
},
},
"kind": "compute#operation", # [Output Only] Type of the resource. Always `compute#operation` for Operation resources.
"name": "A String", # [Output Only] Name of the operation.
"operationGroupId": "A String", # [Output Only] An ID that represents a group of operations, such as when a group of operations results from a `bulkInsert` API request.
"operationType": "A String", # [Output Only] The type of operation, such as `insert`, `update`, or `delete`, and so on.
"progress": 42, # [Output Only] An optional progress indicator that ranges from 0 to 100. There is no requirement that this be linear or support any granularity of operations. This should not be used to guess when the operation will be complete. This number should monotonically increase as the operation progresses.
"region": "A String", # [Output Only] The URL of the region where the operation resides. Only applicable when performing regional operations.
"selfLink": "A String", # [Output Only] Server-defined URL for the resource.
"setCommonInstanceMetadataOperationMetadata": { # [Output Only] If the operation is for projects.setCommonInstanceMetadata, this field will contain information on all underlying zonal actions and their state.
"clientOperationId": "A String", # [Output Only] The client operation id.
"perLocationOperations": { # [Output Only] Status information per location (location name is key). Example key: zones/us-central1-a
"a_key": {
"error": { # The `Status` type defines a logical error model that is suitable for different programming environments, including REST APIs and RPC APIs. It is used by [gRPC](https://github.com/grpc). Each `Status` message contains three pieces of data: error code, error message, and error details. You can find out more about this error model and how to work with it in the [API Design Guide](https://cloud.google.com/apis/design/errors). # [Output Only] If state is `ABANDONED` or `FAILED`, this field is populated.
"code": 42, # The status code, which should be an enum value of google.rpc.Code.
"details": [ # A list of messages that carry the error details. There is a common set of message types for APIs to use.
{
"a_key": "", # Properties of the object. Contains field @type with type URL.
},
],
"message": "A String", # A developer-facing error message, which should be in English. Any user-facing error message should be localized and sent in the google.rpc.Status.details field, or localized by the client.
},
"state": "A String", # [Output Only] Status of the action, which can be one of the following: `PROPAGATING`, `PROPAGATED`, `ABANDONED`, `FAILED`, or `DONE`.
},
},
},
"startTime": "A String", # [Output Only] The time that this operation was started by the server. This value is in RFC3339 text format.
"status": "A String", # [Output Only] The status of the operation, which can be one of the following: `PENDING`, `RUNNING`, or `DONE`.
"statusMessage": "A String", # [Output Only] An optional textual description of the current status of the operation.
"targetId": "A String", # [Output Only] The unique target ID, which identifies a specific incarnation of the target resource.
"targetLink": "A String", # [Output Only] The URL of the resource that the operation modifies. For operations related to creating a snapshot, this points to the persistent disk that the snapshot was created from.
"user": "A String", # [Output Only] User who requested the operation, for example: `user@example.com` or `alice_smith_identifier (global/workforcePools/example-com-us-employees)`.
"warnings": [ # [Output Only] If warning messages are generated during processing of the operation, this field will be populated.
{
"code": "A String", # [Output Only] A warning code, if applicable. For example, Compute Engine returns NO_RESULTS_ON_PAGE if there are no results in the response.
"data": [ # [Output Only] Metadata about this warning in key: value format. For example: "data": [ { "key": "scope", "value": "zones/us-east1-d" }
{
"key": "A String", # [Output Only] A key that provides more detail on the warning being returned. For example, for warnings where there are no results in a list request for a particular zone, this key might be scope and the key value might be the zone name. Other examples might be a key indicating a deprecated resource and a suggested replacement, or a warning about invalid network settings (for example, if an instance attempts to perform IP forwarding but is not enabled for IP forwarding).
"value": "A String", # [Output Only] A warning data value corresponding to the key.
},
],
"message": "A String", # [Output Only] A human-readable description of the warning code.
},
],
"zone": "A String", # [Output Only] The URL of the zone where the operation resides. Only applicable when performing per-zone operations.
}
list(project, region, filter=None, maxResults=None, orderBy=None, pageToken=None, returnPartialSuccess=None, x__xgafv=None)
List all the policies that have been configured for the specified project and region.
Args:
project: string, Project ID for this request. (required)
region: string, Name of the region scoping this request. (required)
filter: string, A filter expression that filters resources listed in the response. Most Compute resources support two types of filter expressions: expressions that support regular expressions and expressions that follow API improvement proposal AIP-160. These two types of filter expressions cannot be mixed in one request. If you want to use AIP-160, your expression must specify the field name, an operator, and the value that you want to use for filtering. The value must be a string, a number, or a boolean. The operator must be either `=`, `!=`, `>`, `<`, `<=`, `>=` or `:`. For example, if you are filtering Compute Engine instances, you can exclude instances named `example-instance` by specifying `name != example-instance`. The `:*` comparison can be used to test whether a key has been defined. For example, to find all objects with `owner` label use: ``` labels.owner:* ``` You can also filter nested fields. For example, you could specify `scheduling.automaticRestart = false` to include instances only if they are not scheduled for automatic restarts. You can use filtering on nested fields to filter based on resource labels. To filter on multiple expressions, provide each separate expression within parentheses. For example: ``` (scheduling.automaticRestart = true) (cpuPlatform = "Intel Skylake") ``` By default, each expression is an `AND` expression. However, you can include `AND` and `OR` expressions explicitly. For example: ``` (cpuPlatform = "Intel Skylake") OR (cpuPlatform = "Intel Broadwell") AND (scheduling.automaticRestart = true) ``` If you want to use a regular expression, use the `eq` (equal) or `ne` (not equal) operator against a single un-parenthesized expression with or without quotes or against multiple parenthesized expressions. Examples: `fieldname eq unquoted literal` `fieldname eq 'single quoted literal'` `fieldname eq "double quoted literal"` `(fieldname1 eq literal) (fieldname2 ne "literal")` The literal value is interpreted as a regular expression using Google RE2 library syntax. The literal value must match the entire field. For example, to filter for instances that do not end with name "instance", you would use `name ne .*instance`. You cannot combine constraints on multiple fields using regular expressions.
maxResults: integer, The maximum number of results per page that should be returned. If the number of available results is larger than `maxResults`, Compute Engine returns a `nextPageToken` that can be used to get the next page of results in subsequent list requests. Acceptable values are `0` to `500`, inclusive. (Default: `500`)
orderBy: string, Sorts list results by a certain order. By default, results are returned in alphanumerical order based on the resource name. You can also sort results in descending order based on the creation timestamp using `orderBy="creationTimestamp desc"`. This sorts results based on the `creationTimestamp` field in reverse chronological order (newest result first). Use this to sort resources like operations so that the newest operation is returned first. Currently, only sorting by `name` or `creationTimestamp desc` is supported.
pageToken: string, Specifies a page token to use. Set `pageToken` to the `nextPageToken` returned by a previous list request to get the next page of results.
returnPartialSuccess: boolean, Opt-in for partial success behavior which provides partial results in case of failure. The default value is false.
x__xgafv: string, V1 error format.
Allowed values
1 - v1 error format
2 - v2 error format
Returns:
An object of the form:
{
"id": "A String", # [Output Only] Unique identifier for the resource; defined by the server.
"items": [ # A list of SecurityPolicy resources.
{ # Represents a Google Cloud Armor security policy resource. Only external backend services that use load balancers can reference a security policy. For more information, see Google Cloud Armor security policy overview.
"adaptiveProtectionConfig": { # Configuration options for Cloud Armor Adaptive Protection (CAAP).
"layer7DdosDefenseConfig": { # Configuration options for L7 DDoS detection. This field is only supported in Global Security Policies of type CLOUD_ARMOR. # If set to true, enables Cloud Armor Machine Learning.
"enable": True or False, # If set to true, enables CAAP for L7 DDoS detection. This field is only supported in Global Security Policies of type CLOUD_ARMOR.
"ruleVisibility": "A String", # Rule visibility can be one of the following: STANDARD - opaque rules. (default) PREMIUM - transparent rules. This field is only supported in Global Security Policies of type CLOUD_ARMOR.
"thresholdConfigs": [ # Configuration options for layer7 adaptive protection for various customizable thresholds.
{
"autoDeployConfidenceThreshold": 3.14,
"autoDeployExpirationSec": 42,
"autoDeployImpactedBaselineThreshold": 3.14,
"autoDeployLoadThreshold": 3.14,
"name": "A String", # The name must be 1-63 characters long, and comply with RFC1035. The name must be unique within the security policy.
},
],
},
},
"advancedOptionsConfig": {
"jsonCustomConfig": { # Custom configuration to apply the JSON parsing. Only applicable when json_parsing is set to STANDARD.
"contentTypes": [ # A list of custom Content-Type header values to apply the JSON parsing. As per RFC 1341, a Content-Type header value has the following format: Content-Type := type "/" subtype *[";" parameter] When configuring a custom Content-Type header value, only the type/subtype needs to be specified, and the parameters should be excluded.
"A String",
],
},
"jsonParsing": "A String",
"logLevel": "A String",
"userIpRequestHeaders": [ # An optional list of case-insensitive request header names to use for resolving the callers client IP address.
"A String",
],
},
"creationTimestamp": "A String", # [Output Only] Creation timestamp in RFC3339 text format.
"ddosProtectionConfig": {
"ddosProtection": "A String",
},
"description": "A String", # An optional description of this resource. Provide this property when you create the resource.
"fingerprint": "A String", # Specifies a fingerprint for this resource, which is essentially a hash of the metadata's contents and used for optimistic locking. The fingerprint is initially generated by Compute Engine and changes after every request to modify or update metadata. You must always provide an up-to-date fingerprint hash in order to update or change metadata, otherwise the request will fail with error 412 conditionNotMet. To see the latest fingerprint, make get() request to the security policy.
"id": "A String", # [Output Only] The unique identifier for the resource. This identifier is defined by the server.
"kind": "compute#securityPolicy", # [Output only] Type of the resource. Always compute#securityPolicyfor security policies
"labelFingerprint": "A String", # A fingerprint for the labels being applied to this security policy, which is essentially a hash of the labels set used for optimistic locking. The fingerprint is initially generated by Compute Engine and changes after every request to modify or update labels. You must always provide an up-to-date fingerprint hash in order to update or change labels. To see the latest fingerprint, make get() request to the security policy.
"labels": { # Labels for this resource. These can only be added or modified by the setLabels method. Each label key/value pair must comply with RFC1035. Label values may be empty.
"a_key": "A String",
},
"name": "A String", # Name of the resource. Provided by the client when the resource is created. The name must be 1-63 characters long, and comply with RFC1035. Specifically, the name must be 1-63 characters long and match the regular expression `[a-z]([-a-z0-9]*[a-z0-9])?` which means the first character must be a lowercase letter, and all following characters must be a dash, lowercase letter, or digit, except the last character, which cannot be a dash.
"recaptchaOptionsConfig": {
"redirectSiteKey": "A String", # An optional field to supply a reCAPTCHA site key to be used for all the rules using the redirect action with the type of GOOGLE_RECAPTCHA under the security policy. The specified site key needs to be created from the reCAPTCHA API. The user is responsible for the validity of the specified site key. If not specified, a Google-managed site key is used. This field is only supported in Global Security Policies of type CLOUD_ARMOR.
},
"region": "A String", # [Output Only] URL of the region where the regional security policy resides. This field is not applicable to global security policies.
"rules": [ # A list of rules that belong to this policy. There must always be a default rule which is a rule with priority 2147483647 and match all condition (for the match condition this means match "*" for srcIpRanges and for the networkMatch condition every field must be either match "*" or not set). If no rules are provided when creating a security policy, a default rule with action "allow" will be added.
{ # Represents a rule that describes one or more match conditions along with the action to be taken when traffic matches this condition (allow or deny).
"action": "A String", # The Action to perform when the rule is matched. The following are the valid actions: - allow: allow access to target. - deny(STATUS): deny access to target, returns the HTTP response code specified. Valid values for `STATUS` are 403, 404, and 502. - rate_based_ban: limit client traffic to the configured threshold and ban the client if the traffic exceeds the threshold. Configure parameters for this action in RateLimitOptions. Requires rate_limit_options to be set. - redirect: redirect to a different target. This can either be an internal reCAPTCHA redirect, or an external URL-based redirect via a 302 response. Parameters for this action can be configured via redirectOptions. This action is only supported in Global Security Policies of type CLOUD_ARMOR. - throttle: limit client traffic to the configured threshold. Configure parameters for this action in rateLimitOptions. Requires rate_limit_options to be set for this.
"description": "A String", # An optional description of this resource. Provide this property when you create the resource.
"headerAction": { # Optional, additional actions that are performed on headers. This field is only supported in Global Security Policies of type CLOUD_ARMOR.
"requestHeadersToAdds": [ # The list of request headers to add or overwrite if they're already present.
{
"headerName": "A String", # The name of the header to set.
"headerValue": "A String", # The value to set the named header to.
},
],
},
"kind": "compute#securityPolicyRule", # [Output only] Type of the resource. Always compute#securityPolicyRule for security policy rules
"match": { # Represents a match condition that incoming traffic is evaluated against. Exactly one field must be specified. # A match condition that incoming traffic is evaluated against. If it evaluates to true, the corresponding 'action' is enforced.
"config": { # The configuration options available when specifying versioned_expr. This field must be specified if versioned_expr is specified and cannot be specified if versioned_expr is not specified.
"srcIpRanges": [ # CIDR IP address range. Maximum number of src_ip_ranges allowed is 10.
"A String",
],
},
"expr": { # Represents a textual expression in the Common Expression Language (CEL) syntax. CEL is a C-like expression language. The syntax and semantics of CEL are documented at https://github.com/google/cel-spec. Example (Comparison): title: "Summary size limit" description: "Determines if a summary is less than 100 chars" expression: "document.summary.size() < 100" Example (Equality): title: "Requestor is owner" description: "Determines if requestor is the document owner" expression: "document.owner == request.auth.claims.email" Example (Logic): title: "Public documents" description: "Determine whether the document should be publicly visible" expression: "document.type != 'private' && document.type != 'internal'" Example (Data Manipulation): title: "Notification string" description: "Create a notification string with a timestamp." expression: "'New message received at ' + string(document.create_time)" The exact variables and functions that may be referenced within an expression are determined by the service that evaluates it. See the service documentation for additional information. # User defined CEVAL expression. A CEVAL expression is used to specify match criteria such as origin.ip, source.region_code and contents in the request header. Expressions containing `evaluateThreatIntelligence` require Cloud Armor Managed Protection Plus tier and are not supported in Edge Policies nor in Regional Policies. Expressions containing `evaluatePreconfiguredExpr('sourceiplist-*')` require Cloud Armor Managed Protection Plus tier and are only supported in Global Security Policies.
"description": "A String", # Optional. Description of the expression. This is a longer text which describes the expression, e.g. when hovered over it in a UI.
"expression": "A String", # Textual representation of an expression in Common Expression Language syntax.
"location": "A String", # Optional. String indicating the location of the expression for error reporting, e.g. a file name and a position in the file.
"title": "A String", # Optional. Title for the expression, i.e. a short string describing its purpose. This can be used e.g. in UIs which allow to enter the expression.
},
"versionedExpr": "A String", # Preconfigured versioned expression. If this field is specified, config must also be specified. Available preconfigured expressions along with their requirements are: SRC_IPS_V1 - must specify the corresponding src_ip_range field in config.
},
"networkMatch": { # Represents a match condition that incoming network traffic is evaluated against. # A match condition that incoming packets are evaluated against for CLOUD_ARMOR_NETWORK security policies. If it matches, the corresponding 'action' is enforced. The match criteria for a rule consists of built-in match fields (like 'srcIpRanges') and potentially multiple user-defined match fields ('userDefinedFields'). Field values may be extracted directly from the packet or derived from it (e.g. 'srcRegionCodes'). Some fields may not be present in every packet (e.g. 'srcPorts'). A user-defined field is only present if the base header is found in the packet and the entire field is in bounds. Each match field may specify which values can match it, listing one or more ranges, prefixes, or exact values that are considered a match for the field. A field value must be present in order to match a specified match field. If no match values are specified for a match field, then any field value is considered to match it, and it's not required to be present. For strings specifying '*' is also equivalent to match all. For a packet to match a rule, all specified match fields must match the corresponding field values derived from the packet. Example: networkMatch: srcIpRanges: - "192.0.2.0/24" - "198.51.100.0/24" userDefinedFields: - name: "ipv4_fragment_offset" values: - "1-0x1fff" The above match condition matches packets with a source IP in 192.0.2.0/24 or 198.51.100.0/24 and a user-defined field named "ipv4_fragment_offset" with a value between 1 and 0x1fff inclusive.
"destIpRanges": [ # Destination IPv4/IPv6 addresses or CIDR prefixes, in standard text format.
"A String",
],
"destPorts": [ # Destination port numbers for TCP/UDP/SCTP. Each element can be a 16-bit unsigned decimal number (e.g. "80") or range (e.g. "0-1023").
"A String",
],
"ipProtocols": [ # IPv4 protocol / IPv6 next header (after extension headers). Each element can be an 8-bit unsigned decimal number (e.g. "6"), range (e.g. "253-254"), or one of the following protocol names: "tcp", "udp", "icmp", "esp", "ah", "ipip", or "sctp".
"A String",
],
"srcAsns": [ # BGP Autonomous System Number associated with the source IP address.
42,
],
"srcIpRanges": [ # Source IPv4/IPv6 addresses or CIDR prefixes, in standard text format.
"A String",
],
"srcPorts": [ # Source port numbers for TCP/UDP/SCTP. Each element can be a 16-bit unsigned decimal number (e.g. "80") or range (e.g. "0-1023").
"A String",
],
"srcRegionCodes": [ # Two-letter ISO 3166-1 alpha-2 country code associated with the source IP address.
"A String",
],
"userDefinedFields": [ # User-defined fields. Each element names a defined field and lists the matching values for that field.
{
"name": "A String", # Name of the user-defined field, as given in the definition.
"values": [ # Matching values of the field. Each element can be a 32-bit unsigned decimal or hexadecimal (starting with "0x") number (e.g. "64") or range (e.g. "0x400-0x7ff").
"A String",
],
},
],
},
"preconfiguredWafConfig": { # Preconfigured WAF configuration to be applied for the rule. If the rule does not evaluate preconfigured WAF rules, i.e., if evaluatePreconfiguredWaf() is not used, this field will have no effect.
"exclusions": [ # A list of exclusions to apply during preconfigured WAF evaluation.
{
"requestCookiesToExclude": [ # A list of request cookie names whose value will be excluded from inspection during preconfigured WAF evaluation.
{
"op": "A String", # The match operator for the field.
"val": "A String", # The value of the field.
},
],
"requestHeadersToExclude": [ # A list of request header names whose value will be excluded from inspection during preconfigured WAF evaluation.
{
"op": "A String", # The match operator for the field.
"val": "A String", # The value of the field.
},
],
"requestQueryParamsToExclude": [ # A list of request query parameter names whose value will be excluded from inspection during preconfigured WAF evaluation. Note that the parameter can be in the query string or in the POST body.
{
"op": "A String", # The match operator for the field.
"val": "A String", # The value of the field.
},
],
"requestUrisToExclude": [ # A list of request URIs from the request line to be excluded from inspection during preconfigured WAF evaluation. When specifying this field, the query or fragment part should be excluded.
{
"op": "A String", # The match operator for the field.
"val": "A String", # The value of the field.
},
],
"targetRuleIds": [ # A list of target rule IDs under the WAF rule set to apply the preconfigured WAF exclusion. If omitted, it refers to all the rule IDs under the WAF rule set.
"A String",
],
"targetRuleSet": "A String", # Target WAF rule set to apply the preconfigured WAF exclusion.
},
],
},
"preview": True or False, # If set to true, the specified action is not enforced.
"priority": 42, # An integer indicating the priority of a rule in the list. The priority must be a positive value between 0 and 2147483647. Rules are evaluated from highest to lowest priority where 0 is the highest priority and 2147483647 is the lowest priority.
"rateLimitOptions": { # Must be specified if the action is "rate_based_ban" or "throttle". Cannot be specified for any other actions.
"banDurationSec": 42, # Can only be specified if the action for the rule is "rate_based_ban". If specified, determines the time (in seconds) the traffic will continue to be banned by the rate limit after the rate falls below the threshold.
"banThreshold": { # Can only be specified if the action for the rule is "rate_based_ban". If specified, the key will be banned for the configured 'ban_duration_sec' when the number of requests that exceed the 'rate_limit_threshold' also exceed this 'ban_threshold'.
"count": 42, # Number of HTTP(S) requests for calculating the threshold.
"intervalSec": 42, # Interval over which the threshold is computed.
},
"conformAction": "A String", # Action to take for requests that are under the configured rate limit threshold. Valid option is "allow" only.
"enforceOnKey": "A String", # Determines the key to enforce the rate_limit_threshold on. Possible values are: - ALL: A single rate limit threshold is applied to all the requests matching this rule. This is the default value if "enforceOnKey" is not configured. - IP: The source IP address of the request is the key. Each IP has this limit enforced separately. - HTTP_HEADER: The value of the HTTP header whose name is configured under "enforceOnKeyName". The key value is truncated to the first 128 bytes of the header value. If no such header is present in the request, the key type defaults to ALL. - XFF_IP: The first IP address (i.e. the originating client IP address) specified in the list of IPs under X-Forwarded-For HTTP header. If no such header is present or the value is not a valid IP, the key defaults to the source IP address of the request i.e. key type IP. - HTTP_COOKIE: The value of the HTTP cookie whose name is configured under "enforceOnKeyName". The key value is truncated to the first 128 bytes of the cookie value. If no such cookie is present in the request, the key type defaults to ALL. - HTTP_PATH: The URL path of the HTTP request. The key value is truncated to the first 128 bytes. - SNI: Server name indication in the TLS session of the HTTPS request. The key value is truncated to the first 128 bytes. The key type defaults to ALL on a HTTP session. - REGION_CODE: The country/region from which the request originates.
"enforceOnKeyConfigs": [ # If specified, any combination of values of enforce_on_key_type/enforce_on_key_name is treated as the key on which ratelimit threshold/action is enforced. You can specify up to 3 enforce_on_key_configs. If enforce_on_key_configs is specified, enforce_on_key must not be specified.
{
"enforceOnKeyName": "A String", # Rate limit key name applicable only for the following key types: HTTP_HEADER -- Name of the HTTP header whose value is taken as the key value. HTTP_COOKIE -- Name of the HTTP cookie whose value is taken as the key value.
"enforceOnKeyType": "A String", # Determines the key to enforce the rate_limit_threshold on. Possible values are: - ALL: A single rate limit threshold is applied to all the requests matching this rule. This is the default value if "enforceOnKeyConfigs" is not configured. - IP: The source IP address of the request is the key. Each IP has this limit enforced separately. - HTTP_HEADER: The value of the HTTP header whose name is configured under "enforceOnKeyName". The key value is truncated to the first 128 bytes of the header value. If no such header is present in the request, the key type defaults to ALL. - XFF_IP: The first IP address (i.e. the originating client IP address) specified in the list of IPs under X-Forwarded-For HTTP header. If no such header is present or the value is not a valid IP, the key defaults to the source IP address of the request i.e. key type IP. - HTTP_COOKIE: The value of the HTTP cookie whose name is configured under "enforceOnKeyName". The key value is truncated to the first 128 bytes of the cookie value. If no such cookie is present in the request, the key type defaults to ALL. - HTTP_PATH: The URL path of the HTTP request. The key value is truncated to the first 128 bytes. - SNI: Server name indication in the TLS session of the HTTPS request. The key value is truncated to the first 128 bytes. The key type defaults to ALL on a HTTP session. - REGION_CODE: The country/region from which the request originates.
},
],
"enforceOnKeyName": "A String", # Rate limit key name applicable only for the following key types: HTTP_HEADER -- Name of the HTTP header whose value is taken as the key value. HTTP_COOKIE -- Name of the HTTP cookie whose value is taken as the key value.
"exceedAction": "A String", # Action to take for requests that are above the configured rate limit threshold, to either deny with a specified HTTP response code, or redirect to a different endpoint. Valid options are `deny(STATUS)`, where valid values for `STATUS` are 403, 404, 429, and 502, and `redirect`, where the redirect parameters come from `exceedRedirectOptions` below. The `redirect` action is only supported in Global Security Policies of type CLOUD_ARMOR.
"exceedRedirectOptions": { # Parameters defining the redirect action that is used as the exceed action. Cannot be specified if the exceed action is not redirect. This field is only supported in Global Security Policies of type CLOUD_ARMOR.
"target": "A String", # Target for the redirect action. This is required if the type is EXTERNAL_302 and cannot be specified for GOOGLE_RECAPTCHA.
"type": "A String", # Type of the redirect action.
},
"rateLimitThreshold": { # Threshold at which to begin ratelimiting.
"count": 42, # Number of HTTP(S) requests for calculating the threshold.
"intervalSec": 42, # Interval over which the threshold is computed.
},
},
"redirectOptions": { # Parameters defining the redirect action. Cannot be specified for any other actions. This field is only supported in Global Security Policies of type CLOUD_ARMOR.
"target": "A String", # Target for the redirect action. This is required if the type is EXTERNAL_302 and cannot be specified for GOOGLE_RECAPTCHA.
"type": "A String", # Type of the redirect action.
},
},
],
"selfLink": "A String", # [Output Only] Server-defined URL for the resource.
"type": "A String", # The type indicates the intended use of the security policy. - CLOUD_ARMOR: Cloud Armor backend security policies can be configured to filter incoming HTTP requests targeting backend services. They filter requests before they hit the origin servers. - CLOUD_ARMOR_EDGE: Cloud Armor edge security policies can be configured to filter incoming HTTP requests targeting backend services (including Cloud CDN-enabled) as well as backend buckets (Cloud Storage). They filter requests before the request is served from Google's cache. - CLOUD_ARMOR_INTERNAL_SERVICE: Cloud Armor internal service policies can be configured to filter HTTP requests targeting services managed by Traffic Director in a service mesh. They filter requests before the request is served from the application. - CLOUD_ARMOR_NETWORK: Cloud Armor network policies can be configured to filter packets targeting network load balancing resources such as backend services, target pools, target instances, and instances with external IPs. They filter requests before the request is served from the application. This field can be set only at resource creation time.
"userDefinedFields": [ # Definitions of user-defined fields for CLOUD_ARMOR_NETWORK policies. A user-defined field consists of up to 4 bytes extracted from a fixed offset in the packet, relative to the IPv4, IPv6, TCP, or UDP header, with an optional mask to select certain bits. Rules may then specify matching values for these fields. Example: userDefinedFields: - name: "ipv4_fragment_offset" base: IPV4 offset: 6 size: 2 mask: "0x1fff"
{
"base": "A String", # The base relative to which 'offset' is measured. Possible values are: - IPV4: Points to the beginning of the IPv4 header. - IPV6: Points to the beginning of the IPv6 header. - TCP: Points to the beginning of the TCP header, skipping over any IPv4 options or IPv6 extension headers. Not present for non-first fragments. - UDP: Points to the beginning of the UDP header, skipping over any IPv4 options or IPv6 extension headers. Not present for non-first fragments. required
"mask": "A String", # If specified, apply this mask (bitwise AND) to the field to ignore bits before matching. Encoded as a hexadecimal number (starting with "0x"). The last byte of the field (in network byte order) corresponds to the least significant byte of the mask.
"name": "A String", # The name of this field. Must be unique within the policy.
"offset": 42, # Offset of the first byte of the field (in network byte order) relative to 'base'.
"size": 42, # Size of the field in bytes. Valid values: 1-4.
},
],
},
],
"kind": "compute#securityPolicyList", # [Output Only] Type of resource. Always compute#securityPolicyList for listsof securityPolicies
"nextPageToken": "A String", # [Output Only] This token allows you to get the next page of results for list requests. If the number of results is larger than maxResults, use the nextPageToken as a value for the query parameter pageToken in the next list request. Subsequent list requests will have their own nextPageToken to continue paging through the results.
"warning": { # [Output Only] Informational warning message.
"code": "A String", # [Output Only] A warning code, if applicable. For example, Compute Engine returns NO_RESULTS_ON_PAGE if there are no results in the response.
"data": [ # [Output Only] Metadata about this warning in key: value format. For example: "data": [ { "key": "scope", "value": "zones/us-east1-d" }
{
"key": "A String", # [Output Only] A key that provides more detail on the warning being returned. For example, for warnings where there are no results in a list request for a particular zone, this key might be scope and the key value might be the zone name. Other examples might be a key indicating a deprecated resource and a suggested replacement, or a warning about invalid network settings (for example, if an instance attempts to perform IP forwarding but is not enabled for IP forwarding).
"value": "A String", # [Output Only] A warning data value corresponding to the key.
},
],
"message": "A String", # [Output Only] A human-readable description of the warning code.
},
}
list_next()
Retrieves the next page of results.
Args:
previous_request: The request for the previous page. (required)
previous_response: The response from the request for the previous page. (required)
Returns:
A request object that you can call 'execute()' on to request the next
page. Returns None if there are no more items in the collection.
patch(project, region, securityPolicy, body=None, requestId=None, updateMask=None, x__xgafv=None)
Patches the specified policy with the data included in the request. To clear fields in the policy, leave the fields empty and specify them in the updateMask. This cannot be used to be update the rules in the policy. Please use the per rule methods like addRule, patchRule, and removeRule instead.
Args:
project: string, Project ID for this request. (required)
region: string, Name of the region scoping this request. (required)
securityPolicy: string, Name of the security policy to update. (required)
body: object, The request body.
The object takes the form of:
{ # Represents a Google Cloud Armor security policy resource. Only external backend services that use load balancers can reference a security policy. For more information, see Google Cloud Armor security policy overview.
"adaptiveProtectionConfig": { # Configuration options for Cloud Armor Adaptive Protection (CAAP).
"layer7DdosDefenseConfig": { # Configuration options for L7 DDoS detection. This field is only supported in Global Security Policies of type CLOUD_ARMOR. # If set to true, enables Cloud Armor Machine Learning.
"enable": True or False, # If set to true, enables CAAP for L7 DDoS detection. This field is only supported in Global Security Policies of type CLOUD_ARMOR.
"ruleVisibility": "A String", # Rule visibility can be one of the following: STANDARD - opaque rules. (default) PREMIUM - transparent rules. This field is only supported in Global Security Policies of type CLOUD_ARMOR.
"thresholdConfigs": [ # Configuration options for layer7 adaptive protection for various customizable thresholds.
{
"autoDeployConfidenceThreshold": 3.14,
"autoDeployExpirationSec": 42,
"autoDeployImpactedBaselineThreshold": 3.14,
"autoDeployLoadThreshold": 3.14,
"name": "A String", # The name must be 1-63 characters long, and comply with RFC1035. The name must be unique within the security policy.
},
],
},
},
"advancedOptionsConfig": {
"jsonCustomConfig": { # Custom configuration to apply the JSON parsing. Only applicable when json_parsing is set to STANDARD.
"contentTypes": [ # A list of custom Content-Type header values to apply the JSON parsing. As per RFC 1341, a Content-Type header value has the following format: Content-Type := type "/" subtype *[";" parameter] When configuring a custom Content-Type header value, only the type/subtype needs to be specified, and the parameters should be excluded.
"A String",
],
},
"jsonParsing": "A String",
"logLevel": "A String",
"userIpRequestHeaders": [ # An optional list of case-insensitive request header names to use for resolving the callers client IP address.
"A String",
],
},
"creationTimestamp": "A String", # [Output Only] Creation timestamp in RFC3339 text format.
"ddosProtectionConfig": {
"ddosProtection": "A String",
},
"description": "A String", # An optional description of this resource. Provide this property when you create the resource.
"fingerprint": "A String", # Specifies a fingerprint for this resource, which is essentially a hash of the metadata's contents and used for optimistic locking. The fingerprint is initially generated by Compute Engine and changes after every request to modify or update metadata. You must always provide an up-to-date fingerprint hash in order to update or change metadata, otherwise the request will fail with error 412 conditionNotMet. To see the latest fingerprint, make get() request to the security policy.
"id": "A String", # [Output Only] The unique identifier for the resource. This identifier is defined by the server.
"kind": "compute#securityPolicy", # [Output only] Type of the resource. Always compute#securityPolicyfor security policies
"labelFingerprint": "A String", # A fingerprint for the labels being applied to this security policy, which is essentially a hash of the labels set used for optimistic locking. The fingerprint is initially generated by Compute Engine and changes after every request to modify or update labels. You must always provide an up-to-date fingerprint hash in order to update or change labels. To see the latest fingerprint, make get() request to the security policy.
"labels": { # Labels for this resource. These can only be added or modified by the setLabels method. Each label key/value pair must comply with RFC1035. Label values may be empty.
"a_key": "A String",
},
"name": "A String", # Name of the resource. Provided by the client when the resource is created. The name must be 1-63 characters long, and comply with RFC1035. Specifically, the name must be 1-63 characters long and match the regular expression `[a-z]([-a-z0-9]*[a-z0-9])?` which means the first character must be a lowercase letter, and all following characters must be a dash, lowercase letter, or digit, except the last character, which cannot be a dash.
"recaptchaOptionsConfig": {
"redirectSiteKey": "A String", # An optional field to supply a reCAPTCHA site key to be used for all the rules using the redirect action with the type of GOOGLE_RECAPTCHA under the security policy. The specified site key needs to be created from the reCAPTCHA API. The user is responsible for the validity of the specified site key. If not specified, a Google-managed site key is used. This field is only supported in Global Security Policies of type CLOUD_ARMOR.
},
"region": "A String", # [Output Only] URL of the region where the regional security policy resides. This field is not applicable to global security policies.
"rules": [ # A list of rules that belong to this policy. There must always be a default rule which is a rule with priority 2147483647 and match all condition (for the match condition this means match "*" for srcIpRanges and for the networkMatch condition every field must be either match "*" or not set). If no rules are provided when creating a security policy, a default rule with action "allow" will be added.
{ # Represents a rule that describes one or more match conditions along with the action to be taken when traffic matches this condition (allow or deny).
"action": "A String", # The Action to perform when the rule is matched. The following are the valid actions: - allow: allow access to target. - deny(STATUS): deny access to target, returns the HTTP response code specified. Valid values for `STATUS` are 403, 404, and 502. - rate_based_ban: limit client traffic to the configured threshold and ban the client if the traffic exceeds the threshold. Configure parameters for this action in RateLimitOptions. Requires rate_limit_options to be set. - redirect: redirect to a different target. This can either be an internal reCAPTCHA redirect, or an external URL-based redirect via a 302 response. Parameters for this action can be configured via redirectOptions. This action is only supported in Global Security Policies of type CLOUD_ARMOR. - throttle: limit client traffic to the configured threshold. Configure parameters for this action in rateLimitOptions. Requires rate_limit_options to be set for this.
"description": "A String", # An optional description of this resource. Provide this property when you create the resource.
"headerAction": { # Optional, additional actions that are performed on headers. This field is only supported in Global Security Policies of type CLOUD_ARMOR.
"requestHeadersToAdds": [ # The list of request headers to add or overwrite if they're already present.
{
"headerName": "A String", # The name of the header to set.
"headerValue": "A String", # The value to set the named header to.
},
],
},
"kind": "compute#securityPolicyRule", # [Output only] Type of the resource. Always compute#securityPolicyRule for security policy rules
"match": { # Represents a match condition that incoming traffic is evaluated against. Exactly one field must be specified. # A match condition that incoming traffic is evaluated against. If it evaluates to true, the corresponding 'action' is enforced.
"config": { # The configuration options available when specifying versioned_expr. This field must be specified if versioned_expr is specified and cannot be specified if versioned_expr is not specified.
"srcIpRanges": [ # CIDR IP address range. Maximum number of src_ip_ranges allowed is 10.
"A String",
],
},
"expr": { # Represents a textual expression in the Common Expression Language (CEL) syntax. CEL is a C-like expression language. The syntax and semantics of CEL are documented at https://github.com/google/cel-spec. Example (Comparison): title: "Summary size limit" description: "Determines if a summary is less than 100 chars" expression: "document.summary.size() < 100" Example (Equality): title: "Requestor is owner" description: "Determines if requestor is the document owner" expression: "document.owner == request.auth.claims.email" Example (Logic): title: "Public documents" description: "Determine whether the document should be publicly visible" expression: "document.type != 'private' && document.type != 'internal'" Example (Data Manipulation): title: "Notification string" description: "Create a notification string with a timestamp." expression: "'New message received at ' + string(document.create_time)" The exact variables and functions that may be referenced within an expression are determined by the service that evaluates it. See the service documentation for additional information. # User defined CEVAL expression. A CEVAL expression is used to specify match criteria such as origin.ip, source.region_code and contents in the request header. Expressions containing `evaluateThreatIntelligence` require Cloud Armor Managed Protection Plus tier and are not supported in Edge Policies nor in Regional Policies. Expressions containing `evaluatePreconfiguredExpr('sourceiplist-*')` require Cloud Armor Managed Protection Plus tier and are only supported in Global Security Policies.
"description": "A String", # Optional. Description of the expression. This is a longer text which describes the expression, e.g. when hovered over it in a UI.
"expression": "A String", # Textual representation of an expression in Common Expression Language syntax.
"location": "A String", # Optional. String indicating the location of the expression for error reporting, e.g. a file name and a position in the file.
"title": "A String", # Optional. Title for the expression, i.e. a short string describing its purpose. This can be used e.g. in UIs which allow to enter the expression.
},
"versionedExpr": "A String", # Preconfigured versioned expression. If this field is specified, config must also be specified. Available preconfigured expressions along with their requirements are: SRC_IPS_V1 - must specify the corresponding src_ip_range field in config.
},
"networkMatch": { # Represents a match condition that incoming network traffic is evaluated against. # A match condition that incoming packets are evaluated against for CLOUD_ARMOR_NETWORK security policies. If it matches, the corresponding 'action' is enforced. The match criteria for a rule consists of built-in match fields (like 'srcIpRanges') and potentially multiple user-defined match fields ('userDefinedFields'). Field values may be extracted directly from the packet or derived from it (e.g. 'srcRegionCodes'). Some fields may not be present in every packet (e.g. 'srcPorts'). A user-defined field is only present if the base header is found in the packet and the entire field is in bounds. Each match field may specify which values can match it, listing one or more ranges, prefixes, or exact values that are considered a match for the field. A field value must be present in order to match a specified match field. If no match values are specified for a match field, then any field value is considered to match it, and it's not required to be present. For strings specifying '*' is also equivalent to match all. For a packet to match a rule, all specified match fields must match the corresponding field values derived from the packet. Example: networkMatch: srcIpRanges: - "192.0.2.0/24" - "198.51.100.0/24" userDefinedFields: - name: "ipv4_fragment_offset" values: - "1-0x1fff" The above match condition matches packets with a source IP in 192.0.2.0/24 or 198.51.100.0/24 and a user-defined field named "ipv4_fragment_offset" with a value between 1 and 0x1fff inclusive.
"destIpRanges": [ # Destination IPv4/IPv6 addresses or CIDR prefixes, in standard text format.
"A String",
],
"destPorts": [ # Destination port numbers for TCP/UDP/SCTP. Each element can be a 16-bit unsigned decimal number (e.g. "80") or range (e.g. "0-1023").
"A String",
],
"ipProtocols": [ # IPv4 protocol / IPv6 next header (after extension headers). Each element can be an 8-bit unsigned decimal number (e.g. "6"), range (e.g. "253-254"), or one of the following protocol names: "tcp", "udp", "icmp", "esp", "ah", "ipip", or "sctp".
"A String",
],
"srcAsns": [ # BGP Autonomous System Number associated with the source IP address.
42,
],
"srcIpRanges": [ # Source IPv4/IPv6 addresses or CIDR prefixes, in standard text format.
"A String",
],
"srcPorts": [ # Source port numbers for TCP/UDP/SCTP. Each element can be a 16-bit unsigned decimal number (e.g. "80") or range (e.g. "0-1023").
"A String",
],
"srcRegionCodes": [ # Two-letter ISO 3166-1 alpha-2 country code associated with the source IP address.
"A String",
],
"userDefinedFields": [ # User-defined fields. Each element names a defined field and lists the matching values for that field.
{
"name": "A String", # Name of the user-defined field, as given in the definition.
"values": [ # Matching values of the field. Each element can be a 32-bit unsigned decimal or hexadecimal (starting with "0x") number (e.g. "64") or range (e.g. "0x400-0x7ff").
"A String",
],
},
],
},
"preconfiguredWafConfig": { # Preconfigured WAF configuration to be applied for the rule. If the rule does not evaluate preconfigured WAF rules, i.e., if evaluatePreconfiguredWaf() is not used, this field will have no effect.
"exclusions": [ # A list of exclusions to apply during preconfigured WAF evaluation.
{
"requestCookiesToExclude": [ # A list of request cookie names whose value will be excluded from inspection during preconfigured WAF evaluation.
{
"op": "A String", # The match operator for the field.
"val": "A String", # The value of the field.
},
],
"requestHeadersToExclude": [ # A list of request header names whose value will be excluded from inspection during preconfigured WAF evaluation.
{
"op": "A String", # The match operator for the field.
"val": "A String", # The value of the field.
},
],
"requestQueryParamsToExclude": [ # A list of request query parameter names whose value will be excluded from inspection during preconfigured WAF evaluation. Note that the parameter can be in the query string or in the POST body.
{
"op": "A String", # The match operator for the field.
"val": "A String", # The value of the field.
},
],
"requestUrisToExclude": [ # A list of request URIs from the request line to be excluded from inspection during preconfigured WAF evaluation. When specifying this field, the query or fragment part should be excluded.
{
"op": "A String", # The match operator for the field.
"val": "A String", # The value of the field.
},
],
"targetRuleIds": [ # A list of target rule IDs under the WAF rule set to apply the preconfigured WAF exclusion. If omitted, it refers to all the rule IDs under the WAF rule set.
"A String",
],
"targetRuleSet": "A String", # Target WAF rule set to apply the preconfigured WAF exclusion.
},
],
},
"preview": True or False, # If set to true, the specified action is not enforced.
"priority": 42, # An integer indicating the priority of a rule in the list. The priority must be a positive value between 0 and 2147483647. Rules are evaluated from highest to lowest priority where 0 is the highest priority and 2147483647 is the lowest priority.
"rateLimitOptions": { # Must be specified if the action is "rate_based_ban" or "throttle". Cannot be specified for any other actions.
"banDurationSec": 42, # Can only be specified if the action for the rule is "rate_based_ban". If specified, determines the time (in seconds) the traffic will continue to be banned by the rate limit after the rate falls below the threshold.
"banThreshold": { # Can only be specified if the action for the rule is "rate_based_ban". If specified, the key will be banned for the configured 'ban_duration_sec' when the number of requests that exceed the 'rate_limit_threshold' also exceed this 'ban_threshold'.
"count": 42, # Number of HTTP(S) requests for calculating the threshold.
"intervalSec": 42, # Interval over which the threshold is computed.
},
"conformAction": "A String", # Action to take for requests that are under the configured rate limit threshold. Valid option is "allow" only.
"enforceOnKey": "A String", # Determines the key to enforce the rate_limit_threshold on. Possible values are: - ALL: A single rate limit threshold is applied to all the requests matching this rule. This is the default value if "enforceOnKey" is not configured. - IP: The source IP address of the request is the key. Each IP has this limit enforced separately. - HTTP_HEADER: The value of the HTTP header whose name is configured under "enforceOnKeyName". The key value is truncated to the first 128 bytes of the header value. If no such header is present in the request, the key type defaults to ALL. - XFF_IP: The first IP address (i.e. the originating client IP address) specified in the list of IPs under X-Forwarded-For HTTP header. If no such header is present or the value is not a valid IP, the key defaults to the source IP address of the request i.e. key type IP. - HTTP_COOKIE: The value of the HTTP cookie whose name is configured under "enforceOnKeyName". The key value is truncated to the first 128 bytes of the cookie value. If no such cookie is present in the request, the key type defaults to ALL. - HTTP_PATH: The URL path of the HTTP request. The key value is truncated to the first 128 bytes. - SNI: Server name indication in the TLS session of the HTTPS request. The key value is truncated to the first 128 bytes. The key type defaults to ALL on a HTTP session. - REGION_CODE: The country/region from which the request originates.
"enforceOnKeyConfigs": [ # If specified, any combination of values of enforce_on_key_type/enforce_on_key_name is treated as the key on which ratelimit threshold/action is enforced. You can specify up to 3 enforce_on_key_configs. If enforce_on_key_configs is specified, enforce_on_key must not be specified.
{
"enforceOnKeyName": "A String", # Rate limit key name applicable only for the following key types: HTTP_HEADER -- Name of the HTTP header whose value is taken as the key value. HTTP_COOKIE -- Name of the HTTP cookie whose value is taken as the key value.
"enforceOnKeyType": "A String", # Determines the key to enforce the rate_limit_threshold on. Possible values are: - ALL: A single rate limit threshold is applied to all the requests matching this rule. This is the default value if "enforceOnKeyConfigs" is not configured. - IP: The source IP address of the request is the key. Each IP has this limit enforced separately. - HTTP_HEADER: The value of the HTTP header whose name is configured under "enforceOnKeyName". The key value is truncated to the first 128 bytes of the header value. If no such header is present in the request, the key type defaults to ALL. - XFF_IP: The first IP address (i.e. the originating client IP address) specified in the list of IPs under X-Forwarded-For HTTP header. If no such header is present or the value is not a valid IP, the key defaults to the source IP address of the request i.e. key type IP. - HTTP_COOKIE: The value of the HTTP cookie whose name is configured under "enforceOnKeyName". The key value is truncated to the first 128 bytes of the cookie value. If no such cookie is present in the request, the key type defaults to ALL. - HTTP_PATH: The URL path of the HTTP request. The key value is truncated to the first 128 bytes. - SNI: Server name indication in the TLS session of the HTTPS request. The key value is truncated to the first 128 bytes. The key type defaults to ALL on a HTTP session. - REGION_CODE: The country/region from which the request originates.
},
],
"enforceOnKeyName": "A String", # Rate limit key name applicable only for the following key types: HTTP_HEADER -- Name of the HTTP header whose value is taken as the key value. HTTP_COOKIE -- Name of the HTTP cookie whose value is taken as the key value.
"exceedAction": "A String", # Action to take for requests that are above the configured rate limit threshold, to either deny with a specified HTTP response code, or redirect to a different endpoint. Valid options are `deny(STATUS)`, where valid values for `STATUS` are 403, 404, 429, and 502, and `redirect`, where the redirect parameters come from `exceedRedirectOptions` below. The `redirect` action is only supported in Global Security Policies of type CLOUD_ARMOR.
"exceedRedirectOptions": { # Parameters defining the redirect action that is used as the exceed action. Cannot be specified if the exceed action is not redirect. This field is only supported in Global Security Policies of type CLOUD_ARMOR.
"target": "A String", # Target for the redirect action. This is required if the type is EXTERNAL_302 and cannot be specified for GOOGLE_RECAPTCHA.
"type": "A String", # Type of the redirect action.
},
"rateLimitThreshold": { # Threshold at which to begin ratelimiting.
"count": 42, # Number of HTTP(S) requests for calculating the threshold.
"intervalSec": 42, # Interval over which the threshold is computed.
},
},
"redirectOptions": { # Parameters defining the redirect action. Cannot be specified for any other actions. This field is only supported in Global Security Policies of type CLOUD_ARMOR.
"target": "A String", # Target for the redirect action. This is required if the type is EXTERNAL_302 and cannot be specified for GOOGLE_RECAPTCHA.
"type": "A String", # Type of the redirect action.
},
},
],
"selfLink": "A String", # [Output Only] Server-defined URL for the resource.
"type": "A String", # The type indicates the intended use of the security policy. - CLOUD_ARMOR: Cloud Armor backend security policies can be configured to filter incoming HTTP requests targeting backend services. They filter requests before they hit the origin servers. - CLOUD_ARMOR_EDGE: Cloud Armor edge security policies can be configured to filter incoming HTTP requests targeting backend services (including Cloud CDN-enabled) as well as backend buckets (Cloud Storage). They filter requests before the request is served from Google's cache. - CLOUD_ARMOR_INTERNAL_SERVICE: Cloud Armor internal service policies can be configured to filter HTTP requests targeting services managed by Traffic Director in a service mesh. They filter requests before the request is served from the application. - CLOUD_ARMOR_NETWORK: Cloud Armor network policies can be configured to filter packets targeting network load balancing resources such as backend services, target pools, target instances, and instances with external IPs. They filter requests before the request is served from the application. This field can be set only at resource creation time.
"userDefinedFields": [ # Definitions of user-defined fields for CLOUD_ARMOR_NETWORK policies. A user-defined field consists of up to 4 bytes extracted from a fixed offset in the packet, relative to the IPv4, IPv6, TCP, or UDP header, with an optional mask to select certain bits. Rules may then specify matching values for these fields. Example: userDefinedFields: - name: "ipv4_fragment_offset" base: IPV4 offset: 6 size: 2 mask: "0x1fff"
{
"base": "A String", # The base relative to which 'offset' is measured. Possible values are: - IPV4: Points to the beginning of the IPv4 header. - IPV6: Points to the beginning of the IPv6 header. - TCP: Points to the beginning of the TCP header, skipping over any IPv4 options or IPv6 extension headers. Not present for non-first fragments. - UDP: Points to the beginning of the UDP header, skipping over any IPv4 options or IPv6 extension headers. Not present for non-first fragments. required
"mask": "A String", # If specified, apply this mask (bitwise AND) to the field to ignore bits before matching. Encoded as a hexadecimal number (starting with "0x"). The last byte of the field (in network byte order) corresponds to the least significant byte of the mask.
"name": "A String", # The name of this field. Must be unique within the policy.
"offset": 42, # Offset of the first byte of the field (in network byte order) relative to 'base'.
"size": 42, # Size of the field in bytes. Valid values: 1-4.
},
],
}
requestId: string, An optional request ID to identify requests. Specify a unique request ID so that if you must retry your request, the server will know to ignore the request if it has already been completed. For example, consider a situation where you make an initial request and the request times out. If you make the request again with the same request ID, the server can check if original operation with the same request ID was received, and if so, will ignore the second request. This prevents clients from accidentally creating duplicate commitments. The request ID must be a valid UUID with the exception that zero UUID is not supported ( 00000000-0000-0000-0000-000000000000).
updateMask: string, Indicates fields to be cleared as part of this request.
x__xgafv: string, V1 error format.
Allowed values
1 - v1 error format
2 - v2 error format
Returns:
An object of the form:
{ # Represents an Operation resource. Google Compute Engine has three Operation resources: * [Global](/compute/docs/reference/rest/v1/globalOperations) * [Regional](/compute/docs/reference/rest/v1/regionOperations) * [Zonal](/compute/docs/reference/rest/v1/zoneOperations) You can use an operation resource to manage asynchronous API requests. For more information, read Handling API responses. Operations can be global, regional or zonal. - For global operations, use the `globalOperations` resource. - For regional operations, use the `regionOperations` resource. - For zonal operations, use the `zoneOperations` resource. For more information, read Global, Regional, and Zonal Resources.
"clientOperationId": "A String", # [Output Only] The value of `requestId` if you provided it in the request. Not present otherwise.
"creationTimestamp": "A String", # [Deprecated] This field is deprecated.
"description": "A String", # [Output Only] A textual description of the operation, which is set when the operation is created.
"endTime": "A String", # [Output Only] The time that this operation was completed. This value is in RFC3339 text format.
"error": { # [Output Only] If errors are generated during processing of the operation, this field will be populated.
"errors": [ # [Output Only] The array of errors encountered while processing this operation.
{
"code": "A String", # [Output Only] The error type identifier for this error.
"errorDetails": [ # [Output Only] An optional list of messages that contain the error details. There is a set of defined message types to use for providing details.The syntax depends on the error code. For example, QuotaExceededInfo will have details when the error code is QUOTA_EXCEEDED.
{
"errorInfo": { # Describes the cause of the error with structured details. Example of an error when contacting the "pubsub.googleapis.com" API when it is not enabled: { "reason": "API_DISABLED" "domain": "googleapis.com" "metadata": { "resource": "projects/123", "service": "pubsub.googleapis.com" } } This response indicates that the pubsub.googleapis.com API is not enabled. Example of an error that is returned when attempting to create a Spanner instance in a region that is out of stock: { "reason": "STOCKOUT" "domain": "spanner.googleapis.com", "metadata": { "availableRegions": "us-central1,us-east2" } }
"domain": "A String", # The logical grouping to which the "reason" belongs. The error domain is typically the registered service name of the tool or product that generates the error. Example: "pubsub.googleapis.com". If the error is generated by some common infrastructure, the error domain must be a globally unique value that identifies the infrastructure. For Google API infrastructure, the error domain is "googleapis.com".
"metadatas": { # Additional structured details about this error. Keys should match /[a-zA-Z0-9-_]/ and be limited to 64 characters in length. When identifying the current value of an exceeded limit, the units should be contained in the key, not the value. For example, rather than {"instanceLimit": "100/request"}, should be returned as, {"instanceLimitPerRequest": "100"}, if the client exceeds the number of instances that can be created in a single (batch) request.
"a_key": "A String",
},
"reason": "A String", # The reason of the error. This is a constant value that identifies the proximate cause of the error. Error reasons are unique within a particular domain of errors. This should be at most 63 characters and match a regular expression of `A-Z+[A-Z0-9]`, which represents UPPER_SNAKE_CASE.
},
"help": { # Provides links to documentation or for performing an out of band action. For example, if a quota check failed with an error indicating the calling project hasn't enabled the accessed service, this can contain a URL pointing directly to the right place in the developer console to flip the bit.
"links": [ # URL(s) pointing to additional information on handling the current error.
{ # Describes a URL link.
"description": "A String", # Describes what the link offers.
"url": "A String", # The URL of the link.
},
],
},
"localizedMessage": { # Provides a localized error message that is safe to return to the user which can be attached to an RPC error.
"locale": "A String", # The locale used following the specification defined at https://www.rfc-editor.org/rfc/bcp/bcp47.txt. Examples are: "en-US", "fr-CH", "es-MX"
"message": "A String", # The localized error message in the above locale.
},
"quotaInfo": { # Additional details for quota exceeded error for resource quota.
"dimensions": { # The map holding related quota dimensions.
"a_key": "A String",
},
"futureLimit": 3.14, # Future quota limit being rolled out. The limit's unit depends on the quota type or metric.
"limit": 3.14, # Current effective quota limit. The limit's unit depends on the quota type or metric.
"limitName": "A String", # The name of the quota limit.
"metricName": "A String", # The Compute Engine quota metric name.
"rolloutStatus": "A String", # Rollout status of the future quota limit.
},
},
],
"location": "A String", # [Output Only] Indicates the field in the request that caused the error. This property is optional.
"message": "A String", # [Output Only] An optional, human-readable error message.
},
],
},
"httpErrorMessage": "A String", # [Output Only] If the operation fails, this field contains the HTTP error message that was returned, such as `NOT FOUND`.
"httpErrorStatusCode": 42, # [Output Only] If the operation fails, this field contains the HTTP error status code that was returned. For example, a `404` means the resource was not found.
"id": "A String", # [Output Only] The unique identifier for the operation. This identifier is defined by the server.
"insertTime": "A String", # [Output Only] The time that this operation was requested. This value is in RFC3339 text format.
"instancesBulkInsertOperationMetadata": {
"perLocationStatus": { # Status information per location (location name is key). Example key: zones/us-central1-a
"a_key": {
"createdVmCount": 42, # [Output Only] Count of VMs successfully created so far.
"deletedVmCount": 42, # [Output Only] Count of VMs that got deleted during rollback.
"failedToCreateVmCount": 42, # [Output Only] Count of VMs that started creating but encountered an error.
"status": "A String", # [Output Only] Creation status of BulkInsert operation - information if the flow is rolling forward or rolling back.
"targetVmCount": 42, # [Output Only] Count of VMs originally planned to be created.
},
},
},
"kind": "compute#operation", # [Output Only] Type of the resource. Always `compute#operation` for Operation resources.
"name": "A String", # [Output Only] Name of the operation.
"operationGroupId": "A String", # [Output Only] An ID that represents a group of operations, such as when a group of operations results from a `bulkInsert` API request.
"operationType": "A String", # [Output Only] The type of operation, such as `insert`, `update`, or `delete`, and so on.
"progress": 42, # [Output Only] An optional progress indicator that ranges from 0 to 100. There is no requirement that this be linear or support any granularity of operations. This should not be used to guess when the operation will be complete. This number should monotonically increase as the operation progresses.
"region": "A String", # [Output Only] The URL of the region where the operation resides. Only applicable when performing regional operations.
"selfLink": "A String", # [Output Only] Server-defined URL for the resource.
"setCommonInstanceMetadataOperationMetadata": { # [Output Only] If the operation is for projects.setCommonInstanceMetadata, this field will contain information on all underlying zonal actions and their state.
"clientOperationId": "A String", # [Output Only] The client operation id.
"perLocationOperations": { # [Output Only] Status information per location (location name is key). Example key: zones/us-central1-a
"a_key": {
"error": { # The `Status` type defines a logical error model that is suitable for different programming environments, including REST APIs and RPC APIs. It is used by [gRPC](https://github.com/grpc). Each `Status` message contains three pieces of data: error code, error message, and error details. You can find out more about this error model and how to work with it in the [API Design Guide](https://cloud.google.com/apis/design/errors). # [Output Only] If state is `ABANDONED` or `FAILED`, this field is populated.
"code": 42, # The status code, which should be an enum value of google.rpc.Code.
"details": [ # A list of messages that carry the error details. There is a common set of message types for APIs to use.
{
"a_key": "", # Properties of the object. Contains field @type with type URL.
},
],
"message": "A String", # A developer-facing error message, which should be in English. Any user-facing error message should be localized and sent in the google.rpc.Status.details field, or localized by the client.
},
"state": "A String", # [Output Only] Status of the action, which can be one of the following: `PROPAGATING`, `PROPAGATED`, `ABANDONED`, `FAILED`, or `DONE`.
},
},
},
"startTime": "A String", # [Output Only] The time that this operation was started by the server. This value is in RFC3339 text format.
"status": "A String", # [Output Only] The status of the operation, which can be one of the following: `PENDING`, `RUNNING`, or `DONE`.
"statusMessage": "A String", # [Output Only] An optional textual description of the current status of the operation.
"targetId": "A String", # [Output Only] The unique target ID, which identifies a specific incarnation of the target resource.
"targetLink": "A String", # [Output Only] The URL of the resource that the operation modifies. For operations related to creating a snapshot, this points to the persistent disk that the snapshot was created from.
"user": "A String", # [Output Only] User who requested the operation, for example: `user@example.com` or `alice_smith_identifier (global/workforcePools/example-com-us-employees)`.
"warnings": [ # [Output Only] If warning messages are generated during processing of the operation, this field will be populated.
{
"code": "A String", # [Output Only] A warning code, if applicable. For example, Compute Engine returns NO_RESULTS_ON_PAGE if there are no results in the response.
"data": [ # [Output Only] Metadata about this warning in key: value format. For example: "data": [ { "key": "scope", "value": "zones/us-east1-d" }
{
"key": "A String", # [Output Only] A key that provides more detail on the warning being returned. For example, for warnings where there are no results in a list request for a particular zone, this key might be scope and the key value might be the zone name. Other examples might be a key indicating a deprecated resource and a suggested replacement, or a warning about invalid network settings (for example, if an instance attempts to perform IP forwarding but is not enabled for IP forwarding).
"value": "A String", # [Output Only] A warning data value corresponding to the key.
},
],
"message": "A String", # [Output Only] A human-readable description of the warning code.
},
],
"zone": "A String", # [Output Only] The URL of the zone where the operation resides. Only applicable when performing per-zone operations.
}
patchRule(project, region, securityPolicy, body=None, priority=None, updateMask=None, validateOnly=None, x__xgafv=None)
Patches a rule at the specified priority. To clear fields in the rule, leave the fields empty and specify them in the updateMask.
Args:
project: string, Project ID for this request. (required)
region: string, Name of the region scoping this request. (required)
securityPolicy: string, Name of the security policy to update. (required)
body: object, The request body.
The object takes the form of:
{ # Represents a rule that describes one or more match conditions along with the action to be taken when traffic matches this condition (allow or deny).
"action": "A String", # The Action to perform when the rule is matched. The following are the valid actions: - allow: allow access to target. - deny(STATUS): deny access to target, returns the HTTP response code specified. Valid values for `STATUS` are 403, 404, and 502. - rate_based_ban: limit client traffic to the configured threshold and ban the client if the traffic exceeds the threshold. Configure parameters for this action in RateLimitOptions. Requires rate_limit_options to be set. - redirect: redirect to a different target. This can either be an internal reCAPTCHA redirect, or an external URL-based redirect via a 302 response. Parameters for this action can be configured via redirectOptions. This action is only supported in Global Security Policies of type CLOUD_ARMOR. - throttle: limit client traffic to the configured threshold. Configure parameters for this action in rateLimitOptions. Requires rate_limit_options to be set for this.
"description": "A String", # An optional description of this resource. Provide this property when you create the resource.
"headerAction": { # Optional, additional actions that are performed on headers. This field is only supported in Global Security Policies of type CLOUD_ARMOR.
"requestHeadersToAdds": [ # The list of request headers to add or overwrite if they're already present.
{
"headerName": "A String", # The name of the header to set.
"headerValue": "A String", # The value to set the named header to.
},
],
},
"kind": "compute#securityPolicyRule", # [Output only] Type of the resource. Always compute#securityPolicyRule for security policy rules
"match": { # Represents a match condition that incoming traffic is evaluated against. Exactly one field must be specified. # A match condition that incoming traffic is evaluated against. If it evaluates to true, the corresponding 'action' is enforced.
"config": { # The configuration options available when specifying versioned_expr. This field must be specified if versioned_expr is specified and cannot be specified if versioned_expr is not specified.
"srcIpRanges": [ # CIDR IP address range. Maximum number of src_ip_ranges allowed is 10.
"A String",
],
},
"expr": { # Represents a textual expression in the Common Expression Language (CEL) syntax. CEL is a C-like expression language. The syntax and semantics of CEL are documented at https://github.com/google/cel-spec. Example (Comparison): title: "Summary size limit" description: "Determines if a summary is less than 100 chars" expression: "document.summary.size() < 100" Example (Equality): title: "Requestor is owner" description: "Determines if requestor is the document owner" expression: "document.owner == request.auth.claims.email" Example (Logic): title: "Public documents" description: "Determine whether the document should be publicly visible" expression: "document.type != 'private' && document.type != 'internal'" Example (Data Manipulation): title: "Notification string" description: "Create a notification string with a timestamp." expression: "'New message received at ' + string(document.create_time)" The exact variables and functions that may be referenced within an expression are determined by the service that evaluates it. See the service documentation for additional information. # User defined CEVAL expression. A CEVAL expression is used to specify match criteria such as origin.ip, source.region_code and contents in the request header. Expressions containing `evaluateThreatIntelligence` require Cloud Armor Managed Protection Plus tier and are not supported in Edge Policies nor in Regional Policies. Expressions containing `evaluatePreconfiguredExpr('sourceiplist-*')` require Cloud Armor Managed Protection Plus tier and are only supported in Global Security Policies.
"description": "A String", # Optional. Description of the expression. This is a longer text which describes the expression, e.g. when hovered over it in a UI.
"expression": "A String", # Textual representation of an expression in Common Expression Language syntax.
"location": "A String", # Optional. String indicating the location of the expression for error reporting, e.g. a file name and a position in the file.
"title": "A String", # Optional. Title for the expression, i.e. a short string describing its purpose. This can be used e.g. in UIs which allow to enter the expression.
},
"versionedExpr": "A String", # Preconfigured versioned expression. If this field is specified, config must also be specified. Available preconfigured expressions along with their requirements are: SRC_IPS_V1 - must specify the corresponding src_ip_range field in config.
},
"networkMatch": { # Represents a match condition that incoming network traffic is evaluated against. # A match condition that incoming packets are evaluated against for CLOUD_ARMOR_NETWORK security policies. If it matches, the corresponding 'action' is enforced. The match criteria for a rule consists of built-in match fields (like 'srcIpRanges') and potentially multiple user-defined match fields ('userDefinedFields'). Field values may be extracted directly from the packet or derived from it (e.g. 'srcRegionCodes'). Some fields may not be present in every packet (e.g. 'srcPorts'). A user-defined field is only present if the base header is found in the packet and the entire field is in bounds. Each match field may specify which values can match it, listing one or more ranges, prefixes, or exact values that are considered a match for the field. A field value must be present in order to match a specified match field. If no match values are specified for a match field, then any field value is considered to match it, and it's not required to be present. For strings specifying '*' is also equivalent to match all. For a packet to match a rule, all specified match fields must match the corresponding field values derived from the packet. Example: networkMatch: srcIpRanges: - "192.0.2.0/24" - "198.51.100.0/24" userDefinedFields: - name: "ipv4_fragment_offset" values: - "1-0x1fff" The above match condition matches packets with a source IP in 192.0.2.0/24 or 198.51.100.0/24 and a user-defined field named "ipv4_fragment_offset" with a value between 1 and 0x1fff inclusive.
"destIpRanges": [ # Destination IPv4/IPv6 addresses or CIDR prefixes, in standard text format.
"A String",
],
"destPorts": [ # Destination port numbers for TCP/UDP/SCTP. Each element can be a 16-bit unsigned decimal number (e.g. "80") or range (e.g. "0-1023").
"A String",
],
"ipProtocols": [ # IPv4 protocol / IPv6 next header (after extension headers). Each element can be an 8-bit unsigned decimal number (e.g. "6"), range (e.g. "253-254"), or one of the following protocol names: "tcp", "udp", "icmp", "esp", "ah", "ipip", or "sctp".
"A String",
],
"srcAsns": [ # BGP Autonomous System Number associated with the source IP address.
42,
],
"srcIpRanges": [ # Source IPv4/IPv6 addresses or CIDR prefixes, in standard text format.
"A String",
],
"srcPorts": [ # Source port numbers for TCP/UDP/SCTP. Each element can be a 16-bit unsigned decimal number (e.g. "80") or range (e.g. "0-1023").
"A String",
],
"srcRegionCodes": [ # Two-letter ISO 3166-1 alpha-2 country code associated with the source IP address.
"A String",
],
"userDefinedFields": [ # User-defined fields. Each element names a defined field and lists the matching values for that field.
{
"name": "A String", # Name of the user-defined field, as given in the definition.
"values": [ # Matching values of the field. Each element can be a 32-bit unsigned decimal or hexadecimal (starting with "0x") number (e.g. "64") or range (e.g. "0x400-0x7ff").
"A String",
],
},
],
},
"preconfiguredWafConfig": { # Preconfigured WAF configuration to be applied for the rule. If the rule does not evaluate preconfigured WAF rules, i.e., if evaluatePreconfiguredWaf() is not used, this field will have no effect.
"exclusions": [ # A list of exclusions to apply during preconfigured WAF evaluation.
{
"requestCookiesToExclude": [ # A list of request cookie names whose value will be excluded from inspection during preconfigured WAF evaluation.
{
"op": "A String", # The match operator for the field.
"val": "A String", # The value of the field.
},
],
"requestHeadersToExclude": [ # A list of request header names whose value will be excluded from inspection during preconfigured WAF evaluation.
{
"op": "A String", # The match operator for the field.
"val": "A String", # The value of the field.
},
],
"requestQueryParamsToExclude": [ # A list of request query parameter names whose value will be excluded from inspection during preconfigured WAF evaluation. Note that the parameter can be in the query string or in the POST body.
{
"op": "A String", # The match operator for the field.
"val": "A String", # The value of the field.
},
],
"requestUrisToExclude": [ # A list of request URIs from the request line to be excluded from inspection during preconfigured WAF evaluation. When specifying this field, the query or fragment part should be excluded.
{
"op": "A String", # The match operator for the field.
"val": "A String", # The value of the field.
},
],
"targetRuleIds": [ # A list of target rule IDs under the WAF rule set to apply the preconfigured WAF exclusion. If omitted, it refers to all the rule IDs under the WAF rule set.
"A String",
],
"targetRuleSet": "A String", # Target WAF rule set to apply the preconfigured WAF exclusion.
},
],
},
"preview": True or False, # If set to true, the specified action is not enforced.
"priority": 42, # An integer indicating the priority of a rule in the list. The priority must be a positive value between 0 and 2147483647. Rules are evaluated from highest to lowest priority where 0 is the highest priority and 2147483647 is the lowest priority.
"rateLimitOptions": { # Must be specified if the action is "rate_based_ban" or "throttle". Cannot be specified for any other actions.
"banDurationSec": 42, # Can only be specified if the action for the rule is "rate_based_ban". If specified, determines the time (in seconds) the traffic will continue to be banned by the rate limit after the rate falls below the threshold.
"banThreshold": { # Can only be specified if the action for the rule is "rate_based_ban". If specified, the key will be banned for the configured 'ban_duration_sec' when the number of requests that exceed the 'rate_limit_threshold' also exceed this 'ban_threshold'.
"count": 42, # Number of HTTP(S) requests for calculating the threshold.
"intervalSec": 42, # Interval over which the threshold is computed.
},
"conformAction": "A String", # Action to take for requests that are under the configured rate limit threshold. Valid option is "allow" only.
"enforceOnKey": "A String", # Determines the key to enforce the rate_limit_threshold on. Possible values are: - ALL: A single rate limit threshold is applied to all the requests matching this rule. This is the default value if "enforceOnKey" is not configured. - IP: The source IP address of the request is the key. Each IP has this limit enforced separately. - HTTP_HEADER: The value of the HTTP header whose name is configured under "enforceOnKeyName". The key value is truncated to the first 128 bytes of the header value. If no such header is present in the request, the key type defaults to ALL. - XFF_IP: The first IP address (i.e. the originating client IP address) specified in the list of IPs under X-Forwarded-For HTTP header. If no such header is present or the value is not a valid IP, the key defaults to the source IP address of the request i.e. key type IP. - HTTP_COOKIE: The value of the HTTP cookie whose name is configured under "enforceOnKeyName". The key value is truncated to the first 128 bytes of the cookie value. If no such cookie is present in the request, the key type defaults to ALL. - HTTP_PATH: The URL path of the HTTP request. The key value is truncated to the first 128 bytes. - SNI: Server name indication in the TLS session of the HTTPS request. The key value is truncated to the first 128 bytes. The key type defaults to ALL on a HTTP session. - REGION_CODE: The country/region from which the request originates.
"enforceOnKeyConfigs": [ # If specified, any combination of values of enforce_on_key_type/enforce_on_key_name is treated as the key on which ratelimit threshold/action is enforced. You can specify up to 3 enforce_on_key_configs. If enforce_on_key_configs is specified, enforce_on_key must not be specified.
{
"enforceOnKeyName": "A String", # Rate limit key name applicable only for the following key types: HTTP_HEADER -- Name of the HTTP header whose value is taken as the key value. HTTP_COOKIE -- Name of the HTTP cookie whose value is taken as the key value.
"enforceOnKeyType": "A String", # Determines the key to enforce the rate_limit_threshold on. Possible values are: - ALL: A single rate limit threshold is applied to all the requests matching this rule. This is the default value if "enforceOnKeyConfigs" is not configured. - IP: The source IP address of the request is the key. Each IP has this limit enforced separately. - HTTP_HEADER: The value of the HTTP header whose name is configured under "enforceOnKeyName". The key value is truncated to the first 128 bytes of the header value. If no such header is present in the request, the key type defaults to ALL. - XFF_IP: The first IP address (i.e. the originating client IP address) specified in the list of IPs under X-Forwarded-For HTTP header. If no such header is present or the value is not a valid IP, the key defaults to the source IP address of the request i.e. key type IP. - HTTP_COOKIE: The value of the HTTP cookie whose name is configured under "enforceOnKeyName". The key value is truncated to the first 128 bytes of the cookie value. If no such cookie is present in the request, the key type defaults to ALL. - HTTP_PATH: The URL path of the HTTP request. The key value is truncated to the first 128 bytes. - SNI: Server name indication in the TLS session of the HTTPS request. The key value is truncated to the first 128 bytes. The key type defaults to ALL on a HTTP session. - REGION_CODE: The country/region from which the request originates.
},
],
"enforceOnKeyName": "A String", # Rate limit key name applicable only for the following key types: HTTP_HEADER -- Name of the HTTP header whose value is taken as the key value. HTTP_COOKIE -- Name of the HTTP cookie whose value is taken as the key value.
"exceedAction": "A String", # Action to take for requests that are above the configured rate limit threshold, to either deny with a specified HTTP response code, or redirect to a different endpoint. Valid options are `deny(STATUS)`, where valid values for `STATUS` are 403, 404, 429, and 502, and `redirect`, where the redirect parameters come from `exceedRedirectOptions` below. The `redirect` action is only supported in Global Security Policies of type CLOUD_ARMOR.
"exceedRedirectOptions": { # Parameters defining the redirect action that is used as the exceed action. Cannot be specified if the exceed action is not redirect. This field is only supported in Global Security Policies of type CLOUD_ARMOR.
"target": "A String", # Target for the redirect action. This is required if the type is EXTERNAL_302 and cannot be specified for GOOGLE_RECAPTCHA.
"type": "A String", # Type of the redirect action.
},
"rateLimitThreshold": { # Threshold at which to begin ratelimiting.
"count": 42, # Number of HTTP(S) requests for calculating the threshold.
"intervalSec": 42, # Interval over which the threshold is computed.
},
},
"redirectOptions": { # Parameters defining the redirect action. Cannot be specified for any other actions. This field is only supported in Global Security Policies of type CLOUD_ARMOR.
"target": "A String", # Target for the redirect action. This is required if the type is EXTERNAL_302 and cannot be specified for GOOGLE_RECAPTCHA.
"type": "A String", # Type of the redirect action.
},
}
priority: integer, The priority of the rule to patch.
updateMask: string, Indicates fields to be cleared as part of this request.
validateOnly: boolean, If true, the request will not be committed.
x__xgafv: string, V1 error format.
Allowed values
1 - v1 error format
2 - v2 error format
Returns:
An object of the form:
{ # Represents an Operation resource. Google Compute Engine has three Operation resources: * [Global](/compute/docs/reference/rest/v1/globalOperations) * [Regional](/compute/docs/reference/rest/v1/regionOperations) * [Zonal](/compute/docs/reference/rest/v1/zoneOperations) You can use an operation resource to manage asynchronous API requests. For more information, read Handling API responses. Operations can be global, regional or zonal. - For global operations, use the `globalOperations` resource. - For regional operations, use the `regionOperations` resource. - For zonal operations, use the `zoneOperations` resource. For more information, read Global, Regional, and Zonal Resources.
"clientOperationId": "A String", # [Output Only] The value of `requestId` if you provided it in the request. Not present otherwise.
"creationTimestamp": "A String", # [Deprecated] This field is deprecated.
"description": "A String", # [Output Only] A textual description of the operation, which is set when the operation is created.
"endTime": "A String", # [Output Only] The time that this operation was completed. This value is in RFC3339 text format.
"error": { # [Output Only] If errors are generated during processing of the operation, this field will be populated.
"errors": [ # [Output Only] The array of errors encountered while processing this operation.
{
"code": "A String", # [Output Only] The error type identifier for this error.
"errorDetails": [ # [Output Only] An optional list of messages that contain the error details. There is a set of defined message types to use for providing details.The syntax depends on the error code. For example, QuotaExceededInfo will have details when the error code is QUOTA_EXCEEDED.
{
"errorInfo": { # Describes the cause of the error with structured details. Example of an error when contacting the "pubsub.googleapis.com" API when it is not enabled: { "reason": "API_DISABLED" "domain": "googleapis.com" "metadata": { "resource": "projects/123", "service": "pubsub.googleapis.com" } } This response indicates that the pubsub.googleapis.com API is not enabled. Example of an error that is returned when attempting to create a Spanner instance in a region that is out of stock: { "reason": "STOCKOUT" "domain": "spanner.googleapis.com", "metadata": { "availableRegions": "us-central1,us-east2" } }
"domain": "A String", # The logical grouping to which the "reason" belongs. The error domain is typically the registered service name of the tool or product that generates the error. Example: "pubsub.googleapis.com". If the error is generated by some common infrastructure, the error domain must be a globally unique value that identifies the infrastructure. For Google API infrastructure, the error domain is "googleapis.com".
"metadatas": { # Additional structured details about this error. Keys should match /[a-zA-Z0-9-_]/ and be limited to 64 characters in length. When identifying the current value of an exceeded limit, the units should be contained in the key, not the value. For example, rather than {"instanceLimit": "100/request"}, should be returned as, {"instanceLimitPerRequest": "100"}, if the client exceeds the number of instances that can be created in a single (batch) request.
"a_key": "A String",
},
"reason": "A String", # The reason of the error. This is a constant value that identifies the proximate cause of the error. Error reasons are unique within a particular domain of errors. This should be at most 63 characters and match a regular expression of `A-Z+[A-Z0-9]`, which represents UPPER_SNAKE_CASE.
},
"help": { # Provides links to documentation or for performing an out of band action. For example, if a quota check failed with an error indicating the calling project hasn't enabled the accessed service, this can contain a URL pointing directly to the right place in the developer console to flip the bit.
"links": [ # URL(s) pointing to additional information on handling the current error.
{ # Describes a URL link.
"description": "A String", # Describes what the link offers.
"url": "A String", # The URL of the link.
},
],
},
"localizedMessage": { # Provides a localized error message that is safe to return to the user which can be attached to an RPC error.
"locale": "A String", # The locale used following the specification defined at https://www.rfc-editor.org/rfc/bcp/bcp47.txt. Examples are: "en-US", "fr-CH", "es-MX"
"message": "A String", # The localized error message in the above locale.
},
"quotaInfo": { # Additional details for quota exceeded error for resource quota.
"dimensions": { # The map holding related quota dimensions.
"a_key": "A String",
},
"futureLimit": 3.14, # Future quota limit being rolled out. The limit's unit depends on the quota type or metric.
"limit": 3.14, # Current effective quota limit. The limit's unit depends on the quota type or metric.
"limitName": "A String", # The name of the quota limit.
"metricName": "A String", # The Compute Engine quota metric name.
"rolloutStatus": "A String", # Rollout status of the future quota limit.
},
},
],
"location": "A String", # [Output Only] Indicates the field in the request that caused the error. This property is optional.
"message": "A String", # [Output Only] An optional, human-readable error message.
},
],
},
"httpErrorMessage": "A String", # [Output Only] If the operation fails, this field contains the HTTP error message that was returned, such as `NOT FOUND`.
"httpErrorStatusCode": 42, # [Output Only] If the operation fails, this field contains the HTTP error status code that was returned. For example, a `404` means the resource was not found.
"id": "A String", # [Output Only] The unique identifier for the operation. This identifier is defined by the server.
"insertTime": "A String", # [Output Only] The time that this operation was requested. This value is in RFC3339 text format.
"instancesBulkInsertOperationMetadata": {
"perLocationStatus": { # Status information per location (location name is key). Example key: zones/us-central1-a
"a_key": {
"createdVmCount": 42, # [Output Only] Count of VMs successfully created so far.
"deletedVmCount": 42, # [Output Only] Count of VMs that got deleted during rollback.
"failedToCreateVmCount": 42, # [Output Only] Count of VMs that started creating but encountered an error.
"status": "A String", # [Output Only] Creation status of BulkInsert operation - information if the flow is rolling forward or rolling back.
"targetVmCount": 42, # [Output Only] Count of VMs originally planned to be created.
},
},
},
"kind": "compute#operation", # [Output Only] Type of the resource. Always `compute#operation` for Operation resources.
"name": "A String", # [Output Only] Name of the operation.
"operationGroupId": "A String", # [Output Only] An ID that represents a group of operations, such as when a group of operations results from a `bulkInsert` API request.
"operationType": "A String", # [Output Only] The type of operation, such as `insert`, `update`, or `delete`, and so on.
"progress": 42, # [Output Only] An optional progress indicator that ranges from 0 to 100. There is no requirement that this be linear or support any granularity of operations. This should not be used to guess when the operation will be complete. This number should monotonically increase as the operation progresses.
"region": "A String", # [Output Only] The URL of the region where the operation resides. Only applicable when performing regional operations.
"selfLink": "A String", # [Output Only] Server-defined URL for the resource.
"setCommonInstanceMetadataOperationMetadata": { # [Output Only] If the operation is for projects.setCommonInstanceMetadata, this field will contain information on all underlying zonal actions and their state.
"clientOperationId": "A String", # [Output Only] The client operation id.
"perLocationOperations": { # [Output Only] Status information per location (location name is key). Example key: zones/us-central1-a
"a_key": {
"error": { # The `Status` type defines a logical error model that is suitable for different programming environments, including REST APIs and RPC APIs. It is used by [gRPC](https://github.com/grpc). Each `Status` message contains three pieces of data: error code, error message, and error details. You can find out more about this error model and how to work with it in the [API Design Guide](https://cloud.google.com/apis/design/errors). # [Output Only] If state is `ABANDONED` or `FAILED`, this field is populated.
"code": 42, # The status code, which should be an enum value of google.rpc.Code.
"details": [ # A list of messages that carry the error details. There is a common set of message types for APIs to use.
{
"a_key": "", # Properties of the object. Contains field @type with type URL.
},
],
"message": "A String", # A developer-facing error message, which should be in English. Any user-facing error message should be localized and sent in the google.rpc.Status.details field, or localized by the client.
},
"state": "A String", # [Output Only] Status of the action, which can be one of the following: `PROPAGATING`, `PROPAGATED`, `ABANDONED`, `FAILED`, or `DONE`.
},
},
},
"startTime": "A String", # [Output Only] The time that this operation was started by the server. This value is in RFC3339 text format.
"status": "A String", # [Output Only] The status of the operation, which can be one of the following: `PENDING`, `RUNNING`, or `DONE`.
"statusMessage": "A String", # [Output Only] An optional textual description of the current status of the operation.
"targetId": "A String", # [Output Only] The unique target ID, which identifies a specific incarnation of the target resource.
"targetLink": "A String", # [Output Only] The URL of the resource that the operation modifies. For operations related to creating a snapshot, this points to the persistent disk that the snapshot was created from.
"user": "A String", # [Output Only] User who requested the operation, for example: `user@example.com` or `alice_smith_identifier (global/workforcePools/example-com-us-employees)`.
"warnings": [ # [Output Only] If warning messages are generated during processing of the operation, this field will be populated.
{
"code": "A String", # [Output Only] A warning code, if applicable. For example, Compute Engine returns NO_RESULTS_ON_PAGE if there are no results in the response.
"data": [ # [Output Only] Metadata about this warning in key: value format. For example: "data": [ { "key": "scope", "value": "zones/us-east1-d" }
{
"key": "A String", # [Output Only] A key that provides more detail on the warning being returned. For example, for warnings where there are no results in a list request for a particular zone, this key might be scope and the key value might be the zone name. Other examples might be a key indicating a deprecated resource and a suggested replacement, or a warning about invalid network settings (for example, if an instance attempts to perform IP forwarding but is not enabled for IP forwarding).
"value": "A String", # [Output Only] A warning data value corresponding to the key.
},
],
"message": "A String", # [Output Only] A human-readable description of the warning code.
},
],
"zone": "A String", # [Output Only] The URL of the zone where the operation resides. Only applicable when performing per-zone operations.
}
removeRule(project, region, securityPolicy, priority=None, x__xgafv=None)
Deletes a rule at the specified priority.
Args:
project: string, Project ID for this request. (required)
region: string, Name of the region scoping this request. (required)
securityPolicy: string, Name of the security policy to update. (required)
priority: integer, The priority of the rule to remove from the security policy.
x__xgafv: string, V1 error format.
Allowed values
1 - v1 error format
2 - v2 error format
Returns:
An object of the form:
{ # Represents an Operation resource. Google Compute Engine has three Operation resources: * [Global](/compute/docs/reference/rest/v1/globalOperations) * [Regional](/compute/docs/reference/rest/v1/regionOperations) * [Zonal](/compute/docs/reference/rest/v1/zoneOperations) You can use an operation resource to manage asynchronous API requests. For more information, read Handling API responses. Operations can be global, regional or zonal. - For global operations, use the `globalOperations` resource. - For regional operations, use the `regionOperations` resource. - For zonal operations, use the `zoneOperations` resource. For more information, read Global, Regional, and Zonal Resources.
"clientOperationId": "A String", # [Output Only] The value of `requestId` if you provided it in the request. Not present otherwise.
"creationTimestamp": "A String", # [Deprecated] This field is deprecated.
"description": "A String", # [Output Only] A textual description of the operation, which is set when the operation is created.
"endTime": "A String", # [Output Only] The time that this operation was completed. This value is in RFC3339 text format.
"error": { # [Output Only] If errors are generated during processing of the operation, this field will be populated.
"errors": [ # [Output Only] The array of errors encountered while processing this operation.
{
"code": "A String", # [Output Only] The error type identifier for this error.
"errorDetails": [ # [Output Only] An optional list of messages that contain the error details. There is a set of defined message types to use for providing details.The syntax depends on the error code. For example, QuotaExceededInfo will have details when the error code is QUOTA_EXCEEDED.
{
"errorInfo": { # Describes the cause of the error with structured details. Example of an error when contacting the "pubsub.googleapis.com" API when it is not enabled: { "reason": "API_DISABLED" "domain": "googleapis.com" "metadata": { "resource": "projects/123", "service": "pubsub.googleapis.com" } } This response indicates that the pubsub.googleapis.com API is not enabled. Example of an error that is returned when attempting to create a Spanner instance in a region that is out of stock: { "reason": "STOCKOUT" "domain": "spanner.googleapis.com", "metadata": { "availableRegions": "us-central1,us-east2" } }
"domain": "A String", # The logical grouping to which the "reason" belongs. The error domain is typically the registered service name of the tool or product that generates the error. Example: "pubsub.googleapis.com". If the error is generated by some common infrastructure, the error domain must be a globally unique value that identifies the infrastructure. For Google API infrastructure, the error domain is "googleapis.com".
"metadatas": { # Additional structured details about this error. Keys should match /[a-zA-Z0-9-_]/ and be limited to 64 characters in length. When identifying the current value of an exceeded limit, the units should be contained in the key, not the value. For example, rather than {"instanceLimit": "100/request"}, should be returned as, {"instanceLimitPerRequest": "100"}, if the client exceeds the number of instances that can be created in a single (batch) request.
"a_key": "A String",
},
"reason": "A String", # The reason of the error. This is a constant value that identifies the proximate cause of the error. Error reasons are unique within a particular domain of errors. This should be at most 63 characters and match a regular expression of `A-Z+[A-Z0-9]`, which represents UPPER_SNAKE_CASE.
},
"help": { # Provides links to documentation or for performing an out of band action. For example, if a quota check failed with an error indicating the calling project hasn't enabled the accessed service, this can contain a URL pointing directly to the right place in the developer console to flip the bit.
"links": [ # URL(s) pointing to additional information on handling the current error.
{ # Describes a URL link.
"description": "A String", # Describes what the link offers.
"url": "A String", # The URL of the link.
},
],
},
"localizedMessage": { # Provides a localized error message that is safe to return to the user which can be attached to an RPC error.
"locale": "A String", # The locale used following the specification defined at https://www.rfc-editor.org/rfc/bcp/bcp47.txt. Examples are: "en-US", "fr-CH", "es-MX"
"message": "A String", # The localized error message in the above locale.
},
"quotaInfo": { # Additional details for quota exceeded error for resource quota.
"dimensions": { # The map holding related quota dimensions.
"a_key": "A String",
},
"futureLimit": 3.14, # Future quota limit being rolled out. The limit's unit depends on the quota type or metric.
"limit": 3.14, # Current effective quota limit. The limit's unit depends on the quota type or metric.
"limitName": "A String", # The name of the quota limit.
"metricName": "A String", # The Compute Engine quota metric name.
"rolloutStatus": "A String", # Rollout status of the future quota limit.
},
},
],
"location": "A String", # [Output Only] Indicates the field in the request that caused the error. This property is optional.
"message": "A String", # [Output Only] An optional, human-readable error message.
},
],
},
"httpErrorMessage": "A String", # [Output Only] If the operation fails, this field contains the HTTP error message that was returned, such as `NOT FOUND`.
"httpErrorStatusCode": 42, # [Output Only] If the operation fails, this field contains the HTTP error status code that was returned. For example, a `404` means the resource was not found.
"id": "A String", # [Output Only] The unique identifier for the operation. This identifier is defined by the server.
"insertTime": "A String", # [Output Only] The time that this operation was requested. This value is in RFC3339 text format.
"instancesBulkInsertOperationMetadata": {
"perLocationStatus": { # Status information per location (location name is key). Example key: zones/us-central1-a
"a_key": {
"createdVmCount": 42, # [Output Only] Count of VMs successfully created so far.
"deletedVmCount": 42, # [Output Only] Count of VMs that got deleted during rollback.
"failedToCreateVmCount": 42, # [Output Only] Count of VMs that started creating but encountered an error.
"status": "A String", # [Output Only] Creation status of BulkInsert operation - information if the flow is rolling forward or rolling back.
"targetVmCount": 42, # [Output Only] Count of VMs originally planned to be created.
},
},
},
"kind": "compute#operation", # [Output Only] Type of the resource. Always `compute#operation` for Operation resources.
"name": "A String", # [Output Only] Name of the operation.
"operationGroupId": "A String", # [Output Only] An ID that represents a group of operations, such as when a group of operations results from a `bulkInsert` API request.
"operationType": "A String", # [Output Only] The type of operation, such as `insert`, `update`, or `delete`, and so on.
"progress": 42, # [Output Only] An optional progress indicator that ranges from 0 to 100. There is no requirement that this be linear or support any granularity of operations. This should not be used to guess when the operation will be complete. This number should monotonically increase as the operation progresses.
"region": "A String", # [Output Only] The URL of the region where the operation resides. Only applicable when performing regional operations.
"selfLink": "A String", # [Output Only] Server-defined URL for the resource.
"setCommonInstanceMetadataOperationMetadata": { # [Output Only] If the operation is for projects.setCommonInstanceMetadata, this field will contain information on all underlying zonal actions and their state.
"clientOperationId": "A String", # [Output Only] The client operation id.
"perLocationOperations": { # [Output Only] Status information per location (location name is key). Example key: zones/us-central1-a
"a_key": {
"error": { # The `Status` type defines a logical error model that is suitable for different programming environments, including REST APIs and RPC APIs. It is used by [gRPC](https://github.com/grpc). Each `Status` message contains three pieces of data: error code, error message, and error details. You can find out more about this error model and how to work with it in the [API Design Guide](https://cloud.google.com/apis/design/errors). # [Output Only] If state is `ABANDONED` or `FAILED`, this field is populated.
"code": 42, # The status code, which should be an enum value of google.rpc.Code.
"details": [ # A list of messages that carry the error details. There is a common set of message types for APIs to use.
{
"a_key": "", # Properties of the object. Contains field @type with type URL.
},
],
"message": "A String", # A developer-facing error message, which should be in English. Any user-facing error message should be localized and sent in the google.rpc.Status.details field, or localized by the client.
},
"state": "A String", # [Output Only] Status of the action, which can be one of the following: `PROPAGATING`, `PROPAGATED`, `ABANDONED`, `FAILED`, or `DONE`.
},
},
},
"startTime": "A String", # [Output Only] The time that this operation was started by the server. This value is in RFC3339 text format.
"status": "A String", # [Output Only] The status of the operation, which can be one of the following: `PENDING`, `RUNNING`, or `DONE`.
"statusMessage": "A String", # [Output Only] An optional textual description of the current status of the operation.
"targetId": "A String", # [Output Only] The unique target ID, which identifies a specific incarnation of the target resource.
"targetLink": "A String", # [Output Only] The URL of the resource that the operation modifies. For operations related to creating a snapshot, this points to the persistent disk that the snapshot was created from.
"user": "A String", # [Output Only] User who requested the operation, for example: `user@example.com` or `alice_smith_identifier (global/workforcePools/example-com-us-employees)`.
"warnings": [ # [Output Only] If warning messages are generated during processing of the operation, this field will be populated.
{
"code": "A String", # [Output Only] A warning code, if applicable. For example, Compute Engine returns NO_RESULTS_ON_PAGE if there are no results in the response.
"data": [ # [Output Only] Metadata about this warning in key: value format. For example: "data": [ { "key": "scope", "value": "zones/us-east1-d" }
{
"key": "A String", # [Output Only] A key that provides more detail on the warning being returned. For example, for warnings where there are no results in a list request for a particular zone, this key might be scope and the key value might be the zone name. Other examples might be a key indicating a deprecated resource and a suggested replacement, or a warning about invalid network settings (for example, if an instance attempts to perform IP forwarding but is not enabled for IP forwarding).
"value": "A String", # [Output Only] A warning data value corresponding to the key.
},
],
"message": "A String", # [Output Only] A human-readable description of the warning code.
},
],
"zone": "A String", # [Output Only] The URL of the zone where the operation resides. Only applicable when performing per-zone operations.
}