Compute Engine API . securityPolicies

Instance Methods

addRule(project, securityPolicy, body=None, validateOnly=None, x__xgafv=None)

Inserts a rule into a security policy.

aggregatedList(project, filter=None, includeAllScopes=None, maxResults=None, orderBy=None, pageToken=None, returnPartialSuccess=None, x__xgafv=None)

Retrieves the list of all SecurityPolicy resources, regional and global, available to the specified project.

aggregatedList_next()

Retrieves the next page of results.

close()

Close httplib2 connections.

delete(project, securityPolicy, requestId=None, x__xgafv=None)

Deletes the specified policy.

get(project, securityPolicy, x__xgafv=None)

List all of the ordered rules present in a single specified policy.

getRule(project, securityPolicy, priority=None, x__xgafv=None)

Gets a rule at the specified priority.

insert(project, body=None, requestId=None, validateOnly=None, x__xgafv=None)

Creates a new policy in the specified project using the data included in the request.

list(project, filter=None, maxResults=None, orderBy=None, pageToken=None, returnPartialSuccess=None, x__xgafv=None)

List all the policies that have been configured for the specified project.

listPreconfiguredExpressionSets(project, filter=None, maxResults=None, orderBy=None, pageToken=None, returnPartialSuccess=None, x__xgafv=None)

Gets the current list of preconfigured Web Application Firewall (WAF) expressions.

list_next()

Retrieves the next page of results.

patch(project, securityPolicy, body=None, requestId=None, x__xgafv=None)

Patches the specified policy with the data included in the request. This cannot be used to be update the rules in the policy. Please use the per rule methods like addRule, patchRule, and removeRule instead.

patchRule(project, securityPolicy, body=None, priority=None, validateOnly=None, x__xgafv=None)

Patches a rule at the specified priority.

removeRule(project, securityPolicy, priority=None, x__xgafv=None)

Deletes a rule at the specified priority.

Method Details

addRule(project, securityPolicy, body=None, validateOnly=None, x__xgafv=None)
Inserts a rule into a security policy.

Args:
  project: string, Project ID for this request. (required)
  securityPolicy: string, Name of the security policy to update. (required)
  body: object, The request body.
    The object takes the form of:

{ # Represents a rule that describes one or more match conditions along with the action to be taken when traffic matches this condition (allow or deny).
  "action": "A String", # The Action to perform when the rule is matched. The following are the valid actions: - allow: allow access to target. - deny(): deny access to target, returns the HTTP response code specified (valid values are 403, 404, and 502). - rate_based_ban: limit client traffic to the configured threshold and ban the client if the traffic exceeds the threshold. Configure parameters for this action in RateLimitOptions. Requires rate_limit_options to be set. - redirect: redirect to a different target. This can either be an internal reCAPTCHA redirect, or an external URL-based redirect via a 302 response. Parameters for this action can be configured via redirectOptions. - throttle: limit client traffic to the configured threshold. Configure parameters for this action in rateLimitOptions. Requires rate_limit_options to be set for this.
  "description": "A String", # An optional description of this resource. Provide this property when you create the resource.
  "headerAction": { # Optional, additional actions that are performed on headers.
    "requestHeadersToAdds": [ # The list of request headers to add or overwrite if they're already present.
      {
        "headerName": "A String", # The name of the header to set.
        "headerValue": "A String", # The value to set the named header to.
      },
    ],
  },
  "kind": "compute#securityPolicyRule", # [Output only] Type of the resource. Always compute#securityPolicyRule for security policy rules
  "match": { # Represents a match condition that incoming traffic is evaluated against. Exactly one field must be specified. # A match condition that incoming traffic is evaluated against. If it evaluates to true, the corresponding 'action' is enforced.
    "config": { # The configuration options available when specifying versioned_expr. This field must be specified if versioned_expr is specified and cannot be specified if versioned_expr is not specified.
      "srcIpRanges": [ # CIDR IP address range. Maximum number of src_ip_ranges allowed is 10.
        "A String",
      ],
    },
    "expr": { # Represents a textual expression in the Common Expression Language (CEL) syntax. CEL is a C-like expression language. The syntax and semantics of CEL are documented at https://github.com/google/cel-spec. Example (Comparison): title: "Summary size limit" description: "Determines if a summary is less than 100 chars" expression: "document.summary.size() < 100" Example (Equality): title: "Requestor is owner" description: "Determines if requestor is the document owner" expression: "document.owner == request.auth.claims.email" Example (Logic): title: "Public documents" description: "Determine whether the document should be publicly visible" expression: "document.type != 'private' && document.type != 'internal'" Example (Data Manipulation): title: "Notification string" description: "Create a notification string with a timestamp." expression: "'New message received at ' + string(document.create_time)" The exact variables and functions that may be referenced within an expression are determined by the service that evaluates it. See the service documentation for additional information. # User defined CEVAL expression. A CEVAL expression is used to specify match criteria such as origin.ip, source.region_code and contents in the request header.
      "description": "A String", # Optional. Description of the expression. This is a longer text which describes the expression, e.g. when hovered over it in a UI.
      "expression": "A String", # Textual representation of an expression in Common Expression Language syntax.
      "location": "A String", # Optional. String indicating the location of the expression for error reporting, e.g. a file name and a position in the file.
      "title": "A String", # Optional. Title for the expression, i.e. a short string describing its purpose. This can be used e.g. in UIs which allow to enter the expression.
    },
    "versionedExpr": "A String", # Preconfigured versioned expression. If this field is specified, config must also be specified. Available preconfigured expressions along with their requirements are: SRC_IPS_V1 - must specify the corresponding src_ip_range field in config.
  },
  "preview": True or False, # If set to true, the specified action is not enforced.
  "priority": 42, # An integer indicating the priority of a rule in the list. The priority must be a positive value between 0 and 2147483647. Rules are evaluated from highest to lowest priority where 0 is the highest priority and 2147483647 is the lowest priority.
  "rateLimitOptions": { # Must be specified if the action is "rate_based_ban" or "throttle". Cannot be specified for any other actions.
    "banDurationSec": 42, # Can only be specified if the action for the rule is "rate_based_ban". If specified, determines the time (in seconds) the traffic will continue to be banned by the rate limit after the rate falls below the threshold.
    "banThreshold": { # Can only be specified if the action for the rule is "rate_based_ban". If specified, the key will be banned for the configured 'ban_duration_sec' when the number of requests that exceed the 'rate_limit_threshold' also exceed this 'ban_threshold'.
      "count": 42, # Number of HTTP(S) requests for calculating the threshold.
      "intervalSec": 42, # Interval over which the threshold is computed.
    },
    "conformAction": "A String", # Action to take for requests that are under the configured rate limit threshold. Valid option is "allow" only.
    "enforceOnKey": "A String", # Determines the key to enforce the rate_limit_threshold on. Possible values are: - ALL: A single rate limit threshold is applied to all the requests matching this rule. This is the default value if this field 'enforce_on_key' is not configured. - IP: The source IP address of the request is the key. Each IP has this limit enforced separately. - HTTP_HEADER: The value of the HTTP header whose name is configured under "enforce_on_key_name". The key value is truncated to the first 128 bytes of the header value. If no such header is present in the request, the key type defaults to ALL. - XFF_IP: The first IP address (i.e. the originating client IP address) specified in the list of IPs under X-Forwarded-For HTTP header. If no such header is present or the value is not a valid IP, the key defaults to the source IP address of the request i.e. key type IP. - HTTP_COOKIE: The value of the HTTP cookie whose name is configured under "enforce_on_key_name". The key value is truncated to the first 128 bytes of the cookie value. If no such cookie is present in the request, the key type defaults to ALL.
    "enforceOnKeyName": "A String", # Rate limit key name applicable only for the following key types: HTTP_HEADER -- Name of the HTTP header whose value is taken as the key value. HTTP_COOKIE -- Name of the HTTP cookie whose value is taken as the key value.
    "exceedAction": "A String", # Action to take for requests that are above the configured rate limit threshold, to either deny with a specified HTTP response code, or redirect to a different endpoint. Valid options are "deny(status)", where valid values for status are 403, 404, 429, and 502, and "redirect" where the redirect parameters come from exceedRedirectOptions below.
    "exceedRedirectOptions": { # Parameters defining the redirect action that is used as the exceed action. Cannot be specified if the exceed action is not redirect.
      "target": "A String", # Target for the redirect action. This is required if the type is EXTERNAL_302 and cannot be specified for GOOGLE_RECAPTCHA.
      "type": "A String", # Type of the redirect action.
    },
    "rateLimitThreshold": { # Threshold at which to begin ratelimiting.
      "count": 42, # Number of HTTP(S) requests for calculating the threshold.
      "intervalSec": 42, # Interval over which the threshold is computed.
    },
  },
  "redirectOptions": { # Parameters defining the redirect action. Cannot be specified for any other actions.
    "target": "A String", # Target for the redirect action. This is required if the type is EXTERNAL_302 and cannot be specified for GOOGLE_RECAPTCHA.
    "type": "A String", # Type of the redirect action.
  },
}

  validateOnly: boolean, If true, the request will not be committed.
  x__xgafv: string, V1 error format.
    Allowed values
      1 - v1 error format
      2 - v2 error format

Returns:
  An object of the form:

    { # Represents an Operation resource. Google Compute Engine has three Operation resources: * [Global](/compute/docs/reference/rest/v1/globalOperations) * [Regional](/compute/docs/reference/rest/v1/regionOperations) * [Zonal](/compute/docs/reference/rest/v1/zoneOperations) You can use an operation resource to manage asynchronous API requests. For more information, read Handling API responses. Operations can be global, regional or zonal. - For global operations, use the `globalOperations` resource. - For regional operations, use the `regionOperations` resource. - For zonal operations, use the `zonalOperations` resource. For more information, read Global, Regional, and Zonal Resources.
  "clientOperationId": "A String", # [Output Only] The value of `requestId` if you provided it in the request. Not present otherwise.
  "creationTimestamp": "A String", # [Deprecated] This field is deprecated.
  "description": "A String", # [Output Only] A textual description of the operation, which is set when the operation is created.
  "endTime": "A String", # [Output Only] The time that this operation was completed. This value is in RFC3339 text format.
  "error": { # [Output Only] If errors are generated during processing of the operation, this field will be populated.
    "errors": [ # [Output Only] The array of errors encountered while processing this operation.
      {
        "code": "A String", # [Output Only] The error type identifier for this error.
        "location": "A String", # [Output Only] Indicates the field in the request that caused the error. This property is optional.
        "message": "A String", # [Output Only] An optional, human-readable error message.
      },
    ],
  },
  "httpErrorMessage": "A String", # [Output Only] If the operation fails, this field contains the HTTP error message that was returned, such as `NOT FOUND`.
  "httpErrorStatusCode": 42, # [Output Only] If the operation fails, this field contains the HTTP error status code that was returned. For example, a `404` means the resource was not found.
  "id": "A String", # [Output Only] The unique identifier for the operation. This identifier is defined by the server.
  "insertTime": "A String", # [Output Only] The time that this operation was requested. This value is in RFC3339 text format.
  "kind": "compute#operation", # [Output Only] Type of the resource. Always `compute#operation` for Operation resources.
  "name": "A String", # [Output Only] Name of the operation.
  "operationGroupId": "A String", # [Output Only] An ID that represents a group of operations, such as when a group of operations results from a `bulkInsert` API request.
  "operationType": "A String", # [Output Only] The type of operation, such as `insert`, `update`, or `delete`, and so on.
  "progress": 42, # [Output Only] An optional progress indicator that ranges from 0 to 100. There is no requirement that this be linear or support any granularity of operations. This should not be used to guess when the operation will be complete. This number should monotonically increase as the operation progresses.
  "region": "A String", # [Output Only] The URL of the region where the operation resides. Only applicable when performing regional operations.
  "selfLink": "A String", # [Output Only] Server-defined URL for the resource.
  "startTime": "A String", # [Output Only] The time that this operation was started by the server. This value is in RFC3339 text format.
  "status": "A String", # [Output Only] The status of the operation, which can be one of the following: `PENDING`, `RUNNING`, or `DONE`.
  "statusMessage": "A String", # [Output Only] An optional textual description of the current status of the operation.
  "targetId": "A String", # [Output Only] The unique target ID, which identifies a specific incarnation of the target resource.
  "targetLink": "A String", # [Output Only] The URL of the resource that the operation modifies. For operations related to creating a snapshot, this points to the persistent disk that the snapshot was created from.
  "user": "A String", # [Output Only] User who requested the operation, for example: `user@example.com`.
  "warnings": [ # [Output Only] If warning messages are generated during processing of the operation, this field will be populated.
    {
      "code": "A String", # [Output Only] A warning code, if applicable. For example, Compute Engine returns NO_RESULTS_ON_PAGE if there are no results in the response.
      "data": [ # [Output Only] Metadata about this warning in key: value format. For example: "data": [ { "key": "scope", "value": "zones/us-east1-d" }
        {
          "key": "A String", # [Output Only] A key that provides more detail on the warning being returned. For example, for warnings where there are no results in a list request for a particular zone, this key might be scope and the key value might be the zone name. Other examples might be a key indicating a deprecated resource and a suggested replacement, or a warning about invalid network settings (for example, if an instance attempts to perform IP forwarding but is not enabled for IP forwarding).
          "value": "A String", # [Output Only] A warning data value corresponding to the key.
        },
      ],
      "message": "A String", # [Output Only] A human-readable description of the warning code.
    },
  ],
  "zone": "A String", # [Output Only] The URL of the zone where the operation resides. Only applicable when performing per-zone operations.
}
aggregatedList(project, filter=None, includeAllScopes=None, maxResults=None, orderBy=None, pageToken=None, returnPartialSuccess=None, x__xgafv=None)
Retrieves the list of all SecurityPolicy resources, regional and global, available to the specified project.

Args:
  project: string, Name of the project scoping this request. (required)
  filter: string, A filter expression that filters resources listed in the response. Most Compute resources support two types of filter expressions: expressions that support regular expressions and expressions that follow API improvement proposal AIP-160. If you want to use AIP-160, your expression must specify the field name, an operator, and the value that you want to use for filtering. The value must be a string, a number, or a boolean. The operator must be either `=`, `!=`, `>`, `<`, `<=`, `>=` or `:`. For example, if you are filtering Compute Engine instances, you can exclude instances named `example-instance` by specifying `name != example-instance`. The `:` operator can be used with string fields to match substrings. For non-string fields it is equivalent to the `=` operator. The `:*` comparison can be used to test whether a key has been defined. For example, to find all objects with `owner` label use: ``` labels.owner:* ``` You can also filter nested fields. For example, you could specify `scheduling.automaticRestart = false` to include instances only if they are not scheduled for automatic restarts. You can use filtering on nested fields to filter based on resource labels. To filter on multiple expressions, provide each separate expression within parentheses. For example: ``` (scheduling.automaticRestart = true) (cpuPlatform = "Intel Skylake") ``` By default, each expression is an `AND` expression. However, you can include `AND` and `OR` expressions explicitly. For example: ``` (cpuPlatform = "Intel Skylake") OR (cpuPlatform = "Intel Broadwell") AND (scheduling.automaticRestart = true) ``` If you want to use a regular expression, use the `eq` (equal) or `ne` (not equal) operator against a single un-parenthesized expression with or without quotes or against multiple parenthesized expressions. Examples: `fieldname eq unquoted literal` `fieldname eq 'single quoted literal'` `fieldname eq "double quoted literal"` `(fieldname1 eq literal) (fieldname2 ne "literal")` The literal value is interpreted as a regular expression using Google RE2 library syntax. The literal value must match the entire field. For example, to filter for instances that do not end with name "instance", you would use `name ne .*instance`.
  includeAllScopes: boolean, Indicates whether every visible scope for each scope type (zone, region, global) should be included in the response. For new resource types added after this field, the flag has no effect as new resource types will always include every visible scope for each scope type in response. For resource types which predate this field, if this flag is omitted or false, only scopes of the scope types where the resource type is expected to be found will be included.
  maxResults: integer, The maximum number of results per page that should be returned. If the number of available results is larger than `maxResults`, Compute Engine returns a `nextPageToken` that can be used to get the next page of results in subsequent list requests. Acceptable values are `0` to `500`, inclusive. (Default: `500`)
  orderBy: string, Sorts list results by a certain order. By default, results are returned in alphanumerical order based on the resource name. You can also sort results in descending order based on the creation timestamp using `orderBy="creationTimestamp desc"`. This sorts results based on the `creationTimestamp` field in reverse chronological order (newest result first). Use this to sort resources like operations so that the newest operation is returned first. Currently, only sorting by `name` or `creationTimestamp desc` is supported.
  pageToken: string, Specifies a page token to use. Set `pageToken` to the `nextPageToken` returned by a previous list request to get the next page of results.
  returnPartialSuccess: boolean, Opt-in for partial success behavior which provides partial results in case of failure. The default value is false.
  x__xgafv: string, V1 error format.
    Allowed values
      1 - v1 error format
      2 - v2 error format

Returns:
  An object of the form:

    {
  "etag": "A String",
  "id": "A String", # [Output Only] Unique identifier for the resource; defined by the server.
  "items": { # A list of SecurityPoliciesScopedList resources.
    "a_key": { # Name of the scope containing this set of security policies.
      "securityPolicies": [ # A list of SecurityPolicies contained in this scope.
        { # Represents a Google Cloud Armor security policy resource. Only external backend services that use load balancers can reference a security policy. For more information, see Google Cloud Armor security policy overview.
          "adaptiveProtectionConfig": { # Configuration options for Cloud Armor Adaptive Protection (CAAP).
            "layer7DdosDefenseConfig": { # Configuration options for L7 DDoS detection. # If set to true, enables Cloud Armor Machine Learning.
              "enable": True or False, # If set to true, enables CAAP for L7 DDoS detection.
              "ruleVisibility": "A String", # Rule visibility can be one of the following: STANDARD - opaque rules. (default) PREMIUM - transparent rules.
            },
          },
          "advancedOptionsConfig": {
            "jsonParsing": "A String",
            "logLevel": "A String",
          },
          "creationTimestamp": "A String", # [Output Only] Creation timestamp in RFC3339 text format.
          "ddosProtectionConfig": {
            "ddosProtection": "A String",
          },
          "description": "A String", # An optional description of this resource. Provide this property when you create the resource.
          "fingerprint": "A String", # Specifies a fingerprint for this resource, which is essentially a hash of the metadata's contents and used for optimistic locking. The fingerprint is initially generated by Compute Engine and changes after every request to modify or update metadata. You must always provide an up-to-date fingerprint hash in order to update or change metadata, otherwise the request will fail with error 412 conditionNotMet. To see the latest fingerprint, make get() request to the security policy.
          "id": "A String", # [Output Only] The unique identifier for the resource. This identifier is defined by the server.
          "kind": "compute#securityPolicy", # [Output only] Type of the resource. Always compute#securityPolicyfor security policies
          "name": "A String", # Name of the resource. Provided by the client when the resource is created. The name must be 1-63 characters long, and comply with RFC1035. Specifically, the name must be 1-63 characters long and match the regular expression `[a-z]([-a-z0-9]*[a-z0-9])?` which means the first character must be a lowercase letter, and all following characters must be a dash, lowercase letter, or digit, except the last character, which cannot be a dash.
          "recaptchaOptionsConfig": {
            "redirectSiteKey": "A String", # An optional field to supply a reCAPTCHA site key to be used for all the rules using the redirect action with the type of GOOGLE_RECAPTCHA under the security policy. The specified site key needs to be created from the reCAPTCHA API. The user is responsible for the validity of the specified site key. If not specified, a Google-managed site key is used.
          },
          "region": "A String", # [Output Only] URL of the region where the regional security policy resides. This field is not applicable to global security policies.
          "rules": [ # A list of rules that belong to this policy. There must always be a default rule (rule with priority 2147483647 and match "*"). If no rules are provided when creating a security policy, a default rule with action "allow" will be added.
            { # Represents a rule that describes one or more match conditions along with the action to be taken when traffic matches this condition (allow or deny).
              "action": "A String", # The Action to perform when the rule is matched. The following are the valid actions: - allow: allow access to target. - deny(): deny access to target, returns the HTTP response code specified (valid values are 403, 404, and 502). - rate_based_ban: limit client traffic to the configured threshold and ban the client if the traffic exceeds the threshold. Configure parameters for this action in RateLimitOptions. Requires rate_limit_options to be set. - redirect: redirect to a different target. This can either be an internal reCAPTCHA redirect, or an external URL-based redirect via a 302 response. Parameters for this action can be configured via redirectOptions. - throttle: limit client traffic to the configured threshold. Configure parameters for this action in rateLimitOptions. Requires rate_limit_options to be set for this.
              "description": "A String", # An optional description of this resource. Provide this property when you create the resource.
              "headerAction": { # Optional, additional actions that are performed on headers.
                "requestHeadersToAdds": [ # The list of request headers to add or overwrite if they're already present.
                  {
                    "headerName": "A String", # The name of the header to set.
                    "headerValue": "A String", # The value to set the named header to.
                  },
                ],
              },
              "kind": "compute#securityPolicyRule", # [Output only] Type of the resource. Always compute#securityPolicyRule for security policy rules
              "match": { # Represents a match condition that incoming traffic is evaluated against. Exactly one field must be specified. # A match condition that incoming traffic is evaluated against. If it evaluates to true, the corresponding 'action' is enforced.
                "config": { # The configuration options available when specifying versioned_expr. This field must be specified if versioned_expr is specified and cannot be specified if versioned_expr is not specified.
                  "srcIpRanges": [ # CIDR IP address range. Maximum number of src_ip_ranges allowed is 10.
                    "A String",
                  ],
                },
                "expr": { # Represents a textual expression in the Common Expression Language (CEL) syntax. CEL is a C-like expression language. The syntax and semantics of CEL are documented at https://github.com/google/cel-spec. Example (Comparison): title: "Summary size limit" description: "Determines if a summary is less than 100 chars" expression: "document.summary.size() < 100" Example (Equality): title: "Requestor is owner" description: "Determines if requestor is the document owner" expression: "document.owner == request.auth.claims.email" Example (Logic): title: "Public documents" description: "Determine whether the document should be publicly visible" expression: "document.type != 'private' && document.type != 'internal'" Example (Data Manipulation): title: "Notification string" description: "Create a notification string with a timestamp." expression: "'New message received at ' + string(document.create_time)" The exact variables and functions that may be referenced within an expression are determined by the service that evaluates it. See the service documentation for additional information. # User defined CEVAL expression. A CEVAL expression is used to specify match criteria such as origin.ip, source.region_code and contents in the request header.
                  "description": "A String", # Optional. Description of the expression. This is a longer text which describes the expression, e.g. when hovered over it in a UI.
                  "expression": "A String", # Textual representation of an expression in Common Expression Language syntax.
                  "location": "A String", # Optional. String indicating the location of the expression for error reporting, e.g. a file name and a position in the file.
                  "title": "A String", # Optional. Title for the expression, i.e. a short string describing its purpose. This can be used e.g. in UIs which allow to enter the expression.
                },
                "versionedExpr": "A String", # Preconfigured versioned expression. If this field is specified, config must also be specified. Available preconfigured expressions along with their requirements are: SRC_IPS_V1 - must specify the corresponding src_ip_range field in config.
              },
              "preview": True or False, # If set to true, the specified action is not enforced.
              "priority": 42, # An integer indicating the priority of a rule in the list. The priority must be a positive value between 0 and 2147483647. Rules are evaluated from highest to lowest priority where 0 is the highest priority and 2147483647 is the lowest priority.
              "rateLimitOptions": { # Must be specified if the action is "rate_based_ban" or "throttle". Cannot be specified for any other actions.
                "banDurationSec": 42, # Can only be specified if the action for the rule is "rate_based_ban". If specified, determines the time (in seconds) the traffic will continue to be banned by the rate limit after the rate falls below the threshold.
                "banThreshold": { # Can only be specified if the action for the rule is "rate_based_ban". If specified, the key will be banned for the configured 'ban_duration_sec' when the number of requests that exceed the 'rate_limit_threshold' also exceed this 'ban_threshold'.
                  "count": 42, # Number of HTTP(S) requests for calculating the threshold.
                  "intervalSec": 42, # Interval over which the threshold is computed.
                },
                "conformAction": "A String", # Action to take for requests that are under the configured rate limit threshold. Valid option is "allow" only.
                "enforceOnKey": "A String", # Determines the key to enforce the rate_limit_threshold on. Possible values are: - ALL: A single rate limit threshold is applied to all the requests matching this rule. This is the default value if this field 'enforce_on_key' is not configured. - IP: The source IP address of the request is the key. Each IP has this limit enforced separately. - HTTP_HEADER: The value of the HTTP header whose name is configured under "enforce_on_key_name". The key value is truncated to the first 128 bytes of the header value. If no such header is present in the request, the key type defaults to ALL. - XFF_IP: The first IP address (i.e. the originating client IP address) specified in the list of IPs under X-Forwarded-For HTTP header. If no such header is present or the value is not a valid IP, the key defaults to the source IP address of the request i.e. key type IP. - HTTP_COOKIE: The value of the HTTP cookie whose name is configured under "enforce_on_key_name". The key value is truncated to the first 128 bytes of the cookie value. If no such cookie is present in the request, the key type defaults to ALL.
                "enforceOnKeyName": "A String", # Rate limit key name applicable only for the following key types: HTTP_HEADER -- Name of the HTTP header whose value is taken as the key value. HTTP_COOKIE -- Name of the HTTP cookie whose value is taken as the key value.
                "exceedAction": "A String", # Action to take for requests that are above the configured rate limit threshold, to either deny with a specified HTTP response code, or redirect to a different endpoint. Valid options are "deny(status)", where valid values for status are 403, 404, 429, and 502, and "redirect" where the redirect parameters come from exceedRedirectOptions below.
                "exceedRedirectOptions": { # Parameters defining the redirect action that is used as the exceed action. Cannot be specified if the exceed action is not redirect.
                  "target": "A String", # Target for the redirect action. This is required if the type is EXTERNAL_302 and cannot be specified for GOOGLE_RECAPTCHA.
                  "type": "A String", # Type of the redirect action.
                },
                "rateLimitThreshold": { # Threshold at which to begin ratelimiting.
                  "count": 42, # Number of HTTP(S) requests for calculating the threshold.
                  "intervalSec": 42, # Interval over which the threshold is computed.
                },
              },
              "redirectOptions": { # Parameters defining the redirect action. Cannot be specified for any other actions.
                "target": "A String", # Target for the redirect action. This is required if the type is EXTERNAL_302 and cannot be specified for GOOGLE_RECAPTCHA.
                "type": "A String", # Type of the redirect action.
              },
            },
          ],
          "selfLink": "A String", # [Output Only] Server-defined URL for the resource.
          "type": "A String", # The type indicates the intended use of the security policy. - CLOUD_ARMOR: Cloud Armor backend security policies can be configured to filter incoming HTTP requests targeting backend services. They filter requests before they hit the origin servers. - CLOUD_ARMOR_EDGE: Cloud Armor edge security policies can be configured to filter incoming HTTP requests targeting backend services (including Cloud CDN-enabled) as well as backend buckets (Cloud Storage). They filter requests before the request is served from Google's cache. - CLOUD_ARMOR_INTERNAL_SERVICE: Cloud Armor internal service policies can be configured to filter HTTP requests targeting services managed by Traffic Director in a service mesh. They filter requests before the request is served from the application. This field can be set only at resource creation time.
        },
      ],
      "warning": { # Informational warning which replaces the list of security policies when the list is empty.
        "code": "A String", # [Output Only] A warning code, if applicable. For example, Compute Engine returns NO_RESULTS_ON_PAGE if there are no results in the response.
        "data": [ # [Output Only] Metadata about this warning in key: value format. For example: "data": [ { "key": "scope", "value": "zones/us-east1-d" }
          {
            "key": "A String", # [Output Only] A key that provides more detail on the warning being returned. For example, for warnings where there are no results in a list request for a particular zone, this key might be scope and the key value might be the zone name. Other examples might be a key indicating a deprecated resource and a suggested replacement, or a warning about invalid network settings (for example, if an instance attempts to perform IP forwarding but is not enabled for IP forwarding).
            "value": "A String", # [Output Only] A warning data value corresponding to the key.
          },
        ],
        "message": "A String", # [Output Only] A human-readable description of the warning code.
      },
    },
  },
  "kind": "compute#securityPoliciesAggregatedList", # [Output Only] Type of resource. Always compute#securityPolicyAggregatedList for lists of Security Policies.
  "nextPageToken": "A String", # [Output Only] This token allows you to get the next page of results for list requests. If the number of results is larger than maxResults, use the nextPageToken as a value for the query parameter pageToken in the next list request. Subsequent list requests will have their own nextPageToken to continue paging through the results.
  "selfLink": "A String", # [Output Only] Server-defined URL for this resource.
  "unreachables": [ # [Output Only] Unreachable resources.
    "A String",
  ],
  "warning": { # [Output Only] Informational warning message.
    "code": "A String", # [Output Only] A warning code, if applicable. For example, Compute Engine returns NO_RESULTS_ON_PAGE if there are no results in the response.
    "data": [ # [Output Only] Metadata about this warning in key: value format. For example: "data": [ { "key": "scope", "value": "zones/us-east1-d" }
      {
        "key": "A String", # [Output Only] A key that provides more detail on the warning being returned. For example, for warnings where there are no results in a list request for a particular zone, this key might be scope and the key value might be the zone name. Other examples might be a key indicating a deprecated resource and a suggested replacement, or a warning about invalid network settings (for example, if an instance attempts to perform IP forwarding but is not enabled for IP forwarding).
        "value": "A String", # [Output Only] A warning data value corresponding to the key.
      },
    ],
    "message": "A String", # [Output Only] A human-readable description of the warning code.
  },
}
aggregatedList_next()
Retrieves the next page of results.

        Args:
          previous_request: The request for the previous page. (required)
          previous_response: The response from the request for the previous page. (required)

        Returns:
          A request object that you can call 'execute()' on to request the next
          page. Returns None if there are no more items in the collection.
        
close()
Close httplib2 connections.
delete(project, securityPolicy, requestId=None, x__xgafv=None)
Deletes the specified policy.

Args:
  project: string, Project ID for this request. (required)
  securityPolicy: string, Name of the security policy to delete. (required)
  requestId: string, An optional request ID to identify requests. Specify a unique request ID so that if you must retry your request, the server will know to ignore the request if it has already been completed. For example, consider a situation where you make an initial request and the request times out. If you make the request again with the same request ID, the server can check if original operation with the same request ID was received, and if so, will ignore the second request. This prevents clients from accidentally creating duplicate commitments. The request ID must be a valid UUID with the exception that zero UUID is not supported ( 00000000-0000-0000-0000-000000000000).
  x__xgafv: string, V1 error format.
    Allowed values
      1 - v1 error format
      2 - v2 error format

Returns:
  An object of the form:

    { # Represents an Operation resource. Google Compute Engine has three Operation resources: * [Global](/compute/docs/reference/rest/v1/globalOperations) * [Regional](/compute/docs/reference/rest/v1/regionOperations) * [Zonal](/compute/docs/reference/rest/v1/zoneOperations) You can use an operation resource to manage asynchronous API requests. For more information, read Handling API responses. Operations can be global, regional or zonal. - For global operations, use the `globalOperations` resource. - For regional operations, use the `regionOperations` resource. - For zonal operations, use the `zonalOperations` resource. For more information, read Global, Regional, and Zonal Resources.
  "clientOperationId": "A String", # [Output Only] The value of `requestId` if you provided it in the request. Not present otherwise.
  "creationTimestamp": "A String", # [Deprecated] This field is deprecated.
  "description": "A String", # [Output Only] A textual description of the operation, which is set when the operation is created.
  "endTime": "A String", # [Output Only] The time that this operation was completed. This value is in RFC3339 text format.
  "error": { # [Output Only] If errors are generated during processing of the operation, this field will be populated.
    "errors": [ # [Output Only] The array of errors encountered while processing this operation.
      {
        "code": "A String", # [Output Only] The error type identifier for this error.
        "location": "A String", # [Output Only] Indicates the field in the request that caused the error. This property is optional.
        "message": "A String", # [Output Only] An optional, human-readable error message.
      },
    ],
  },
  "httpErrorMessage": "A String", # [Output Only] If the operation fails, this field contains the HTTP error message that was returned, such as `NOT FOUND`.
  "httpErrorStatusCode": 42, # [Output Only] If the operation fails, this field contains the HTTP error status code that was returned. For example, a `404` means the resource was not found.
  "id": "A String", # [Output Only] The unique identifier for the operation. This identifier is defined by the server.
  "insertTime": "A String", # [Output Only] The time that this operation was requested. This value is in RFC3339 text format.
  "kind": "compute#operation", # [Output Only] Type of the resource. Always `compute#operation` for Operation resources.
  "name": "A String", # [Output Only] Name of the operation.
  "operationGroupId": "A String", # [Output Only] An ID that represents a group of operations, such as when a group of operations results from a `bulkInsert` API request.
  "operationType": "A String", # [Output Only] The type of operation, such as `insert`, `update`, or `delete`, and so on.
  "progress": 42, # [Output Only] An optional progress indicator that ranges from 0 to 100. There is no requirement that this be linear or support any granularity of operations. This should not be used to guess when the operation will be complete. This number should monotonically increase as the operation progresses.
  "region": "A String", # [Output Only] The URL of the region where the operation resides. Only applicable when performing regional operations.
  "selfLink": "A String", # [Output Only] Server-defined URL for the resource.
  "startTime": "A String", # [Output Only] The time that this operation was started by the server. This value is in RFC3339 text format.
  "status": "A String", # [Output Only] The status of the operation, which can be one of the following: `PENDING`, `RUNNING`, or `DONE`.
  "statusMessage": "A String", # [Output Only] An optional textual description of the current status of the operation.
  "targetId": "A String", # [Output Only] The unique target ID, which identifies a specific incarnation of the target resource.
  "targetLink": "A String", # [Output Only] The URL of the resource that the operation modifies. For operations related to creating a snapshot, this points to the persistent disk that the snapshot was created from.
  "user": "A String", # [Output Only] User who requested the operation, for example: `user@example.com`.
  "warnings": [ # [Output Only] If warning messages are generated during processing of the operation, this field will be populated.
    {
      "code": "A String", # [Output Only] A warning code, if applicable. For example, Compute Engine returns NO_RESULTS_ON_PAGE if there are no results in the response.
      "data": [ # [Output Only] Metadata about this warning in key: value format. For example: "data": [ { "key": "scope", "value": "zones/us-east1-d" }
        {
          "key": "A String", # [Output Only] A key that provides more detail on the warning being returned. For example, for warnings where there are no results in a list request for a particular zone, this key might be scope and the key value might be the zone name. Other examples might be a key indicating a deprecated resource and a suggested replacement, or a warning about invalid network settings (for example, if an instance attempts to perform IP forwarding but is not enabled for IP forwarding).
          "value": "A String", # [Output Only] A warning data value corresponding to the key.
        },
      ],
      "message": "A String", # [Output Only] A human-readable description of the warning code.
    },
  ],
  "zone": "A String", # [Output Only] The URL of the zone where the operation resides. Only applicable when performing per-zone operations.
}
get(project, securityPolicy, x__xgafv=None)
List all of the ordered rules present in a single specified policy.

Args:
  project: string, Project ID for this request. (required)
  securityPolicy: string, Name of the security policy to get. (required)
  x__xgafv: string, V1 error format.
    Allowed values
      1 - v1 error format
      2 - v2 error format

Returns:
  An object of the form:

    { # Represents a Google Cloud Armor security policy resource. Only external backend services that use load balancers can reference a security policy. For more information, see Google Cloud Armor security policy overview.
  "adaptiveProtectionConfig": { # Configuration options for Cloud Armor Adaptive Protection (CAAP).
    "layer7DdosDefenseConfig": { # Configuration options for L7 DDoS detection. # If set to true, enables Cloud Armor Machine Learning.
      "enable": True or False, # If set to true, enables CAAP for L7 DDoS detection.
      "ruleVisibility": "A String", # Rule visibility can be one of the following: STANDARD - opaque rules. (default) PREMIUM - transparent rules.
    },
  },
  "advancedOptionsConfig": {
    "jsonParsing": "A String",
    "logLevel": "A String",
  },
  "creationTimestamp": "A String", # [Output Only] Creation timestamp in RFC3339 text format.
  "ddosProtectionConfig": {
    "ddosProtection": "A String",
  },
  "description": "A String", # An optional description of this resource. Provide this property when you create the resource.
  "fingerprint": "A String", # Specifies a fingerprint for this resource, which is essentially a hash of the metadata's contents and used for optimistic locking. The fingerprint is initially generated by Compute Engine and changes after every request to modify or update metadata. You must always provide an up-to-date fingerprint hash in order to update or change metadata, otherwise the request will fail with error 412 conditionNotMet. To see the latest fingerprint, make get() request to the security policy.
  "id": "A String", # [Output Only] The unique identifier for the resource. This identifier is defined by the server.
  "kind": "compute#securityPolicy", # [Output only] Type of the resource. Always compute#securityPolicyfor security policies
  "name": "A String", # Name of the resource. Provided by the client when the resource is created. The name must be 1-63 characters long, and comply with RFC1035. Specifically, the name must be 1-63 characters long and match the regular expression `[a-z]([-a-z0-9]*[a-z0-9])?` which means the first character must be a lowercase letter, and all following characters must be a dash, lowercase letter, or digit, except the last character, which cannot be a dash.
  "recaptchaOptionsConfig": {
    "redirectSiteKey": "A String", # An optional field to supply a reCAPTCHA site key to be used for all the rules using the redirect action with the type of GOOGLE_RECAPTCHA under the security policy. The specified site key needs to be created from the reCAPTCHA API. The user is responsible for the validity of the specified site key. If not specified, a Google-managed site key is used.
  },
  "region": "A String", # [Output Only] URL of the region where the regional security policy resides. This field is not applicable to global security policies.
  "rules": [ # A list of rules that belong to this policy. There must always be a default rule (rule with priority 2147483647 and match "*"). If no rules are provided when creating a security policy, a default rule with action "allow" will be added.
    { # Represents a rule that describes one or more match conditions along with the action to be taken when traffic matches this condition (allow or deny).
      "action": "A String", # The Action to perform when the rule is matched. The following are the valid actions: - allow: allow access to target. - deny(): deny access to target, returns the HTTP response code specified (valid values are 403, 404, and 502). - rate_based_ban: limit client traffic to the configured threshold and ban the client if the traffic exceeds the threshold. Configure parameters for this action in RateLimitOptions. Requires rate_limit_options to be set. - redirect: redirect to a different target. This can either be an internal reCAPTCHA redirect, or an external URL-based redirect via a 302 response. Parameters for this action can be configured via redirectOptions. - throttle: limit client traffic to the configured threshold. Configure parameters for this action in rateLimitOptions. Requires rate_limit_options to be set for this.
      "description": "A String", # An optional description of this resource. Provide this property when you create the resource.
      "headerAction": { # Optional, additional actions that are performed on headers.
        "requestHeadersToAdds": [ # The list of request headers to add or overwrite if they're already present.
          {
            "headerName": "A String", # The name of the header to set.
            "headerValue": "A String", # The value to set the named header to.
          },
        ],
      },
      "kind": "compute#securityPolicyRule", # [Output only] Type of the resource. Always compute#securityPolicyRule for security policy rules
      "match": { # Represents a match condition that incoming traffic is evaluated against. Exactly one field must be specified. # A match condition that incoming traffic is evaluated against. If it evaluates to true, the corresponding 'action' is enforced.
        "config": { # The configuration options available when specifying versioned_expr. This field must be specified if versioned_expr is specified and cannot be specified if versioned_expr is not specified.
          "srcIpRanges": [ # CIDR IP address range. Maximum number of src_ip_ranges allowed is 10.
            "A String",
          ],
        },
        "expr": { # Represents a textual expression in the Common Expression Language (CEL) syntax. CEL is a C-like expression language. The syntax and semantics of CEL are documented at https://github.com/google/cel-spec. Example (Comparison): title: "Summary size limit" description: "Determines if a summary is less than 100 chars" expression: "document.summary.size() < 100" Example (Equality): title: "Requestor is owner" description: "Determines if requestor is the document owner" expression: "document.owner == request.auth.claims.email" Example (Logic): title: "Public documents" description: "Determine whether the document should be publicly visible" expression: "document.type != 'private' && document.type != 'internal'" Example (Data Manipulation): title: "Notification string" description: "Create a notification string with a timestamp." expression: "'New message received at ' + string(document.create_time)" The exact variables and functions that may be referenced within an expression are determined by the service that evaluates it. See the service documentation for additional information. # User defined CEVAL expression. A CEVAL expression is used to specify match criteria such as origin.ip, source.region_code and contents in the request header.
          "description": "A String", # Optional. Description of the expression. This is a longer text which describes the expression, e.g. when hovered over it in a UI.
          "expression": "A String", # Textual representation of an expression in Common Expression Language syntax.
          "location": "A String", # Optional. String indicating the location of the expression for error reporting, e.g. a file name and a position in the file.
          "title": "A String", # Optional. Title for the expression, i.e. a short string describing its purpose. This can be used e.g. in UIs which allow to enter the expression.
        },
        "versionedExpr": "A String", # Preconfigured versioned expression. If this field is specified, config must also be specified. Available preconfigured expressions along with their requirements are: SRC_IPS_V1 - must specify the corresponding src_ip_range field in config.
      },
      "preview": True or False, # If set to true, the specified action is not enforced.
      "priority": 42, # An integer indicating the priority of a rule in the list. The priority must be a positive value between 0 and 2147483647. Rules are evaluated from highest to lowest priority where 0 is the highest priority and 2147483647 is the lowest priority.
      "rateLimitOptions": { # Must be specified if the action is "rate_based_ban" or "throttle". Cannot be specified for any other actions.
        "banDurationSec": 42, # Can only be specified if the action for the rule is "rate_based_ban". If specified, determines the time (in seconds) the traffic will continue to be banned by the rate limit after the rate falls below the threshold.
        "banThreshold": { # Can only be specified if the action for the rule is "rate_based_ban". If specified, the key will be banned for the configured 'ban_duration_sec' when the number of requests that exceed the 'rate_limit_threshold' also exceed this 'ban_threshold'.
          "count": 42, # Number of HTTP(S) requests for calculating the threshold.
          "intervalSec": 42, # Interval over which the threshold is computed.
        },
        "conformAction": "A String", # Action to take for requests that are under the configured rate limit threshold. Valid option is "allow" only.
        "enforceOnKey": "A String", # Determines the key to enforce the rate_limit_threshold on. Possible values are: - ALL: A single rate limit threshold is applied to all the requests matching this rule. This is the default value if this field 'enforce_on_key' is not configured. - IP: The source IP address of the request is the key. Each IP has this limit enforced separately. - HTTP_HEADER: The value of the HTTP header whose name is configured under "enforce_on_key_name". The key value is truncated to the first 128 bytes of the header value. If no such header is present in the request, the key type defaults to ALL. - XFF_IP: The first IP address (i.e. the originating client IP address) specified in the list of IPs under X-Forwarded-For HTTP header. If no such header is present or the value is not a valid IP, the key defaults to the source IP address of the request i.e. key type IP. - HTTP_COOKIE: The value of the HTTP cookie whose name is configured under "enforce_on_key_name". The key value is truncated to the first 128 bytes of the cookie value. If no such cookie is present in the request, the key type defaults to ALL.
        "enforceOnKeyName": "A String", # Rate limit key name applicable only for the following key types: HTTP_HEADER -- Name of the HTTP header whose value is taken as the key value. HTTP_COOKIE -- Name of the HTTP cookie whose value is taken as the key value.
        "exceedAction": "A String", # Action to take for requests that are above the configured rate limit threshold, to either deny with a specified HTTP response code, or redirect to a different endpoint. Valid options are "deny(status)", where valid values for status are 403, 404, 429, and 502, and "redirect" where the redirect parameters come from exceedRedirectOptions below.
        "exceedRedirectOptions": { # Parameters defining the redirect action that is used as the exceed action. Cannot be specified if the exceed action is not redirect.
          "target": "A String", # Target for the redirect action. This is required if the type is EXTERNAL_302 and cannot be specified for GOOGLE_RECAPTCHA.
          "type": "A String", # Type of the redirect action.
        },
        "rateLimitThreshold": { # Threshold at which to begin ratelimiting.
          "count": 42, # Number of HTTP(S) requests for calculating the threshold.
          "intervalSec": 42, # Interval over which the threshold is computed.
        },
      },
      "redirectOptions": { # Parameters defining the redirect action. Cannot be specified for any other actions.
        "target": "A String", # Target for the redirect action. This is required if the type is EXTERNAL_302 and cannot be specified for GOOGLE_RECAPTCHA.
        "type": "A String", # Type of the redirect action.
      },
    },
  ],
  "selfLink": "A String", # [Output Only] Server-defined URL for the resource.
  "type": "A String", # The type indicates the intended use of the security policy. - CLOUD_ARMOR: Cloud Armor backend security policies can be configured to filter incoming HTTP requests targeting backend services. They filter requests before they hit the origin servers. - CLOUD_ARMOR_EDGE: Cloud Armor edge security policies can be configured to filter incoming HTTP requests targeting backend services (including Cloud CDN-enabled) as well as backend buckets (Cloud Storage). They filter requests before the request is served from Google's cache. - CLOUD_ARMOR_INTERNAL_SERVICE: Cloud Armor internal service policies can be configured to filter HTTP requests targeting services managed by Traffic Director in a service mesh. They filter requests before the request is served from the application. This field can be set only at resource creation time.
}
getRule(project, securityPolicy, priority=None, x__xgafv=None)
Gets a rule at the specified priority.

Args:
  project: string, Project ID for this request. (required)
  securityPolicy: string, Name of the security policy to which the queried rule belongs. (required)
  priority: integer, The priority of the rule to get from the security policy.
  x__xgafv: string, V1 error format.
    Allowed values
      1 - v1 error format
      2 - v2 error format

Returns:
  An object of the form:

    { # Represents a rule that describes one or more match conditions along with the action to be taken when traffic matches this condition (allow or deny).
  "action": "A String", # The Action to perform when the rule is matched. The following are the valid actions: - allow: allow access to target. - deny(): deny access to target, returns the HTTP response code specified (valid values are 403, 404, and 502). - rate_based_ban: limit client traffic to the configured threshold and ban the client if the traffic exceeds the threshold. Configure parameters for this action in RateLimitOptions. Requires rate_limit_options to be set. - redirect: redirect to a different target. This can either be an internal reCAPTCHA redirect, or an external URL-based redirect via a 302 response. Parameters for this action can be configured via redirectOptions. - throttle: limit client traffic to the configured threshold. Configure parameters for this action in rateLimitOptions. Requires rate_limit_options to be set for this.
  "description": "A String", # An optional description of this resource. Provide this property when you create the resource.
  "headerAction": { # Optional, additional actions that are performed on headers.
    "requestHeadersToAdds": [ # The list of request headers to add or overwrite if they're already present.
      {
        "headerName": "A String", # The name of the header to set.
        "headerValue": "A String", # The value to set the named header to.
      },
    ],
  },
  "kind": "compute#securityPolicyRule", # [Output only] Type of the resource. Always compute#securityPolicyRule for security policy rules
  "match": { # Represents a match condition that incoming traffic is evaluated against. Exactly one field must be specified. # A match condition that incoming traffic is evaluated against. If it evaluates to true, the corresponding 'action' is enforced.
    "config": { # The configuration options available when specifying versioned_expr. This field must be specified if versioned_expr is specified and cannot be specified if versioned_expr is not specified.
      "srcIpRanges": [ # CIDR IP address range. Maximum number of src_ip_ranges allowed is 10.
        "A String",
      ],
    },
    "expr": { # Represents a textual expression in the Common Expression Language (CEL) syntax. CEL is a C-like expression language. The syntax and semantics of CEL are documented at https://github.com/google/cel-spec. Example (Comparison): title: "Summary size limit" description: "Determines if a summary is less than 100 chars" expression: "document.summary.size() < 100" Example (Equality): title: "Requestor is owner" description: "Determines if requestor is the document owner" expression: "document.owner == request.auth.claims.email" Example (Logic): title: "Public documents" description: "Determine whether the document should be publicly visible" expression: "document.type != 'private' && document.type != 'internal'" Example (Data Manipulation): title: "Notification string" description: "Create a notification string with a timestamp." expression: "'New message received at ' + string(document.create_time)" The exact variables and functions that may be referenced within an expression are determined by the service that evaluates it. See the service documentation for additional information. # User defined CEVAL expression. A CEVAL expression is used to specify match criteria such as origin.ip, source.region_code and contents in the request header.
      "description": "A String", # Optional. Description of the expression. This is a longer text which describes the expression, e.g. when hovered over it in a UI.
      "expression": "A String", # Textual representation of an expression in Common Expression Language syntax.
      "location": "A String", # Optional. String indicating the location of the expression for error reporting, e.g. a file name and a position in the file.
      "title": "A String", # Optional. Title for the expression, i.e. a short string describing its purpose. This can be used e.g. in UIs which allow to enter the expression.
    },
    "versionedExpr": "A String", # Preconfigured versioned expression. If this field is specified, config must also be specified. Available preconfigured expressions along with their requirements are: SRC_IPS_V1 - must specify the corresponding src_ip_range field in config.
  },
  "preview": True or False, # If set to true, the specified action is not enforced.
  "priority": 42, # An integer indicating the priority of a rule in the list. The priority must be a positive value between 0 and 2147483647. Rules are evaluated from highest to lowest priority where 0 is the highest priority and 2147483647 is the lowest priority.
  "rateLimitOptions": { # Must be specified if the action is "rate_based_ban" or "throttle". Cannot be specified for any other actions.
    "banDurationSec": 42, # Can only be specified if the action for the rule is "rate_based_ban". If specified, determines the time (in seconds) the traffic will continue to be banned by the rate limit after the rate falls below the threshold.
    "banThreshold": { # Can only be specified if the action for the rule is "rate_based_ban". If specified, the key will be banned for the configured 'ban_duration_sec' when the number of requests that exceed the 'rate_limit_threshold' also exceed this 'ban_threshold'.
      "count": 42, # Number of HTTP(S) requests for calculating the threshold.
      "intervalSec": 42, # Interval over which the threshold is computed.
    },
    "conformAction": "A String", # Action to take for requests that are under the configured rate limit threshold. Valid option is "allow" only.
    "enforceOnKey": "A String", # Determines the key to enforce the rate_limit_threshold on. Possible values are: - ALL: A single rate limit threshold is applied to all the requests matching this rule. This is the default value if this field 'enforce_on_key' is not configured. - IP: The source IP address of the request is the key. Each IP has this limit enforced separately. - HTTP_HEADER: The value of the HTTP header whose name is configured under "enforce_on_key_name". The key value is truncated to the first 128 bytes of the header value. If no such header is present in the request, the key type defaults to ALL. - XFF_IP: The first IP address (i.e. the originating client IP address) specified in the list of IPs under X-Forwarded-For HTTP header. If no such header is present or the value is not a valid IP, the key defaults to the source IP address of the request i.e. key type IP. - HTTP_COOKIE: The value of the HTTP cookie whose name is configured under "enforce_on_key_name". The key value is truncated to the first 128 bytes of the cookie value. If no such cookie is present in the request, the key type defaults to ALL.
    "enforceOnKeyName": "A String", # Rate limit key name applicable only for the following key types: HTTP_HEADER -- Name of the HTTP header whose value is taken as the key value. HTTP_COOKIE -- Name of the HTTP cookie whose value is taken as the key value.
    "exceedAction": "A String", # Action to take for requests that are above the configured rate limit threshold, to either deny with a specified HTTP response code, or redirect to a different endpoint. Valid options are "deny(status)", where valid values for status are 403, 404, 429, and 502, and "redirect" where the redirect parameters come from exceedRedirectOptions below.
    "exceedRedirectOptions": { # Parameters defining the redirect action that is used as the exceed action. Cannot be specified if the exceed action is not redirect.
      "target": "A String", # Target for the redirect action. This is required if the type is EXTERNAL_302 and cannot be specified for GOOGLE_RECAPTCHA.
      "type": "A String", # Type of the redirect action.
    },
    "rateLimitThreshold": { # Threshold at which to begin ratelimiting.
      "count": 42, # Number of HTTP(S) requests for calculating the threshold.
      "intervalSec": 42, # Interval over which the threshold is computed.
    },
  },
  "redirectOptions": { # Parameters defining the redirect action. Cannot be specified for any other actions.
    "target": "A String", # Target for the redirect action. This is required if the type is EXTERNAL_302 and cannot be specified for GOOGLE_RECAPTCHA.
    "type": "A String", # Type of the redirect action.
  },
}
insert(project, body=None, requestId=None, validateOnly=None, x__xgafv=None)
Creates a new policy in the specified project using the data included in the request.

Args:
  project: string, Project ID for this request. (required)
  body: object, The request body.
    The object takes the form of:

{ # Represents a Google Cloud Armor security policy resource. Only external backend services that use load balancers can reference a security policy. For more information, see Google Cloud Armor security policy overview.
  "adaptiveProtectionConfig": { # Configuration options for Cloud Armor Adaptive Protection (CAAP).
    "layer7DdosDefenseConfig": { # Configuration options for L7 DDoS detection. # If set to true, enables Cloud Armor Machine Learning.
      "enable": True or False, # If set to true, enables CAAP for L7 DDoS detection.
      "ruleVisibility": "A String", # Rule visibility can be one of the following: STANDARD - opaque rules. (default) PREMIUM - transparent rules.
    },
  },
  "advancedOptionsConfig": {
    "jsonParsing": "A String",
    "logLevel": "A String",
  },
  "creationTimestamp": "A String", # [Output Only] Creation timestamp in RFC3339 text format.
  "ddosProtectionConfig": {
    "ddosProtection": "A String",
  },
  "description": "A String", # An optional description of this resource. Provide this property when you create the resource.
  "fingerprint": "A String", # Specifies a fingerprint for this resource, which is essentially a hash of the metadata's contents and used for optimistic locking. The fingerprint is initially generated by Compute Engine and changes after every request to modify or update metadata. You must always provide an up-to-date fingerprint hash in order to update or change metadata, otherwise the request will fail with error 412 conditionNotMet. To see the latest fingerprint, make get() request to the security policy.
  "id": "A String", # [Output Only] The unique identifier for the resource. This identifier is defined by the server.
  "kind": "compute#securityPolicy", # [Output only] Type of the resource. Always compute#securityPolicyfor security policies
  "name": "A String", # Name of the resource. Provided by the client when the resource is created. The name must be 1-63 characters long, and comply with RFC1035. Specifically, the name must be 1-63 characters long and match the regular expression `[a-z]([-a-z0-9]*[a-z0-9])?` which means the first character must be a lowercase letter, and all following characters must be a dash, lowercase letter, or digit, except the last character, which cannot be a dash.
  "recaptchaOptionsConfig": {
    "redirectSiteKey": "A String", # An optional field to supply a reCAPTCHA site key to be used for all the rules using the redirect action with the type of GOOGLE_RECAPTCHA under the security policy. The specified site key needs to be created from the reCAPTCHA API. The user is responsible for the validity of the specified site key. If not specified, a Google-managed site key is used.
  },
  "region": "A String", # [Output Only] URL of the region where the regional security policy resides. This field is not applicable to global security policies.
  "rules": [ # A list of rules that belong to this policy. There must always be a default rule (rule with priority 2147483647 and match "*"). If no rules are provided when creating a security policy, a default rule with action "allow" will be added.
    { # Represents a rule that describes one or more match conditions along with the action to be taken when traffic matches this condition (allow or deny).
      "action": "A String", # The Action to perform when the rule is matched. The following are the valid actions: - allow: allow access to target. - deny(): deny access to target, returns the HTTP response code specified (valid values are 403, 404, and 502). - rate_based_ban: limit client traffic to the configured threshold and ban the client if the traffic exceeds the threshold. Configure parameters for this action in RateLimitOptions. Requires rate_limit_options to be set. - redirect: redirect to a different target. This can either be an internal reCAPTCHA redirect, or an external URL-based redirect via a 302 response. Parameters for this action can be configured via redirectOptions. - throttle: limit client traffic to the configured threshold. Configure parameters for this action in rateLimitOptions. Requires rate_limit_options to be set for this.
      "description": "A String", # An optional description of this resource. Provide this property when you create the resource.
      "headerAction": { # Optional, additional actions that are performed on headers.
        "requestHeadersToAdds": [ # The list of request headers to add or overwrite if they're already present.
          {
            "headerName": "A String", # The name of the header to set.
            "headerValue": "A String", # The value to set the named header to.
          },
        ],
      },
      "kind": "compute#securityPolicyRule", # [Output only] Type of the resource. Always compute#securityPolicyRule for security policy rules
      "match": { # Represents a match condition that incoming traffic is evaluated against. Exactly one field must be specified. # A match condition that incoming traffic is evaluated against. If it evaluates to true, the corresponding 'action' is enforced.
        "config": { # The configuration options available when specifying versioned_expr. This field must be specified if versioned_expr is specified and cannot be specified if versioned_expr is not specified.
          "srcIpRanges": [ # CIDR IP address range. Maximum number of src_ip_ranges allowed is 10.
            "A String",
          ],
        },
        "expr": { # Represents a textual expression in the Common Expression Language (CEL) syntax. CEL is a C-like expression language. The syntax and semantics of CEL are documented at https://github.com/google/cel-spec. Example (Comparison): title: "Summary size limit" description: "Determines if a summary is less than 100 chars" expression: "document.summary.size() < 100" Example (Equality): title: "Requestor is owner" description: "Determines if requestor is the document owner" expression: "document.owner == request.auth.claims.email" Example (Logic): title: "Public documents" description: "Determine whether the document should be publicly visible" expression: "document.type != 'private' && document.type != 'internal'" Example (Data Manipulation): title: "Notification string" description: "Create a notification string with a timestamp." expression: "'New message received at ' + string(document.create_time)" The exact variables and functions that may be referenced within an expression are determined by the service that evaluates it. See the service documentation for additional information. # User defined CEVAL expression. A CEVAL expression is used to specify match criteria such as origin.ip, source.region_code and contents in the request header.
          "description": "A String", # Optional. Description of the expression. This is a longer text which describes the expression, e.g. when hovered over it in a UI.
          "expression": "A String", # Textual representation of an expression in Common Expression Language syntax.
          "location": "A String", # Optional. String indicating the location of the expression for error reporting, e.g. a file name and a position in the file.
          "title": "A String", # Optional. Title for the expression, i.e. a short string describing its purpose. This can be used e.g. in UIs which allow to enter the expression.
        },
        "versionedExpr": "A String", # Preconfigured versioned expression. If this field is specified, config must also be specified. Available preconfigured expressions along with their requirements are: SRC_IPS_V1 - must specify the corresponding src_ip_range field in config.
      },
      "preview": True or False, # If set to true, the specified action is not enforced.
      "priority": 42, # An integer indicating the priority of a rule in the list. The priority must be a positive value between 0 and 2147483647. Rules are evaluated from highest to lowest priority where 0 is the highest priority and 2147483647 is the lowest priority.
      "rateLimitOptions": { # Must be specified if the action is "rate_based_ban" or "throttle". Cannot be specified for any other actions.
        "banDurationSec": 42, # Can only be specified if the action for the rule is "rate_based_ban". If specified, determines the time (in seconds) the traffic will continue to be banned by the rate limit after the rate falls below the threshold.
        "banThreshold": { # Can only be specified if the action for the rule is "rate_based_ban". If specified, the key will be banned for the configured 'ban_duration_sec' when the number of requests that exceed the 'rate_limit_threshold' also exceed this 'ban_threshold'.
          "count": 42, # Number of HTTP(S) requests for calculating the threshold.
          "intervalSec": 42, # Interval over which the threshold is computed.
        },
        "conformAction": "A String", # Action to take for requests that are under the configured rate limit threshold. Valid option is "allow" only.
        "enforceOnKey": "A String", # Determines the key to enforce the rate_limit_threshold on. Possible values are: - ALL: A single rate limit threshold is applied to all the requests matching this rule. This is the default value if this field 'enforce_on_key' is not configured. - IP: The source IP address of the request is the key. Each IP has this limit enforced separately. - HTTP_HEADER: The value of the HTTP header whose name is configured under "enforce_on_key_name". The key value is truncated to the first 128 bytes of the header value. If no such header is present in the request, the key type defaults to ALL. - XFF_IP: The first IP address (i.e. the originating client IP address) specified in the list of IPs under X-Forwarded-For HTTP header. If no such header is present or the value is not a valid IP, the key defaults to the source IP address of the request i.e. key type IP. - HTTP_COOKIE: The value of the HTTP cookie whose name is configured under "enforce_on_key_name". The key value is truncated to the first 128 bytes of the cookie value. If no such cookie is present in the request, the key type defaults to ALL.
        "enforceOnKeyName": "A String", # Rate limit key name applicable only for the following key types: HTTP_HEADER -- Name of the HTTP header whose value is taken as the key value. HTTP_COOKIE -- Name of the HTTP cookie whose value is taken as the key value.
        "exceedAction": "A String", # Action to take for requests that are above the configured rate limit threshold, to either deny with a specified HTTP response code, or redirect to a different endpoint. Valid options are "deny(status)", where valid values for status are 403, 404, 429, and 502, and "redirect" where the redirect parameters come from exceedRedirectOptions below.
        "exceedRedirectOptions": { # Parameters defining the redirect action that is used as the exceed action. Cannot be specified if the exceed action is not redirect.
          "target": "A String", # Target for the redirect action. This is required if the type is EXTERNAL_302 and cannot be specified for GOOGLE_RECAPTCHA.
          "type": "A String", # Type of the redirect action.
        },
        "rateLimitThreshold": { # Threshold at which to begin ratelimiting.
          "count": 42, # Number of HTTP(S) requests for calculating the threshold.
          "intervalSec": 42, # Interval over which the threshold is computed.
        },
      },
      "redirectOptions": { # Parameters defining the redirect action. Cannot be specified for any other actions.
        "target": "A String", # Target for the redirect action. This is required if the type is EXTERNAL_302 and cannot be specified for GOOGLE_RECAPTCHA.
        "type": "A String", # Type of the redirect action.
      },
    },
  ],
  "selfLink": "A String", # [Output Only] Server-defined URL for the resource.
  "type": "A String", # The type indicates the intended use of the security policy. - CLOUD_ARMOR: Cloud Armor backend security policies can be configured to filter incoming HTTP requests targeting backend services. They filter requests before they hit the origin servers. - CLOUD_ARMOR_EDGE: Cloud Armor edge security policies can be configured to filter incoming HTTP requests targeting backend services (including Cloud CDN-enabled) as well as backend buckets (Cloud Storage). They filter requests before the request is served from Google's cache. - CLOUD_ARMOR_INTERNAL_SERVICE: Cloud Armor internal service policies can be configured to filter HTTP requests targeting services managed by Traffic Director in a service mesh. They filter requests before the request is served from the application. This field can be set only at resource creation time.
}

  requestId: string, An optional request ID to identify requests. Specify a unique request ID so that if you must retry your request, the server will know to ignore the request if it has already been completed. For example, consider a situation where you make an initial request and the request times out. If you make the request again with the same request ID, the server can check if original operation with the same request ID was received, and if so, will ignore the second request. This prevents clients from accidentally creating duplicate commitments. The request ID must be a valid UUID with the exception that zero UUID is not supported ( 00000000-0000-0000-0000-000000000000).
  validateOnly: boolean, If true, the request will not be committed.
  x__xgafv: string, V1 error format.
    Allowed values
      1 - v1 error format
      2 - v2 error format

Returns:
  An object of the form:

    { # Represents an Operation resource. Google Compute Engine has three Operation resources: * [Global](/compute/docs/reference/rest/v1/globalOperations) * [Regional](/compute/docs/reference/rest/v1/regionOperations) * [Zonal](/compute/docs/reference/rest/v1/zoneOperations) You can use an operation resource to manage asynchronous API requests. For more information, read Handling API responses. Operations can be global, regional or zonal. - For global operations, use the `globalOperations` resource. - For regional operations, use the `regionOperations` resource. - For zonal operations, use the `zonalOperations` resource. For more information, read Global, Regional, and Zonal Resources.
  "clientOperationId": "A String", # [Output Only] The value of `requestId` if you provided it in the request. Not present otherwise.
  "creationTimestamp": "A String", # [Deprecated] This field is deprecated.
  "description": "A String", # [Output Only] A textual description of the operation, which is set when the operation is created.
  "endTime": "A String", # [Output Only] The time that this operation was completed. This value is in RFC3339 text format.
  "error": { # [Output Only] If errors are generated during processing of the operation, this field will be populated.
    "errors": [ # [Output Only] The array of errors encountered while processing this operation.
      {
        "code": "A String", # [Output Only] The error type identifier for this error.
        "location": "A String", # [Output Only] Indicates the field in the request that caused the error. This property is optional.
        "message": "A String", # [Output Only] An optional, human-readable error message.
      },
    ],
  },
  "httpErrorMessage": "A String", # [Output Only] If the operation fails, this field contains the HTTP error message that was returned, such as `NOT FOUND`.
  "httpErrorStatusCode": 42, # [Output Only] If the operation fails, this field contains the HTTP error status code that was returned. For example, a `404` means the resource was not found.
  "id": "A String", # [Output Only] The unique identifier for the operation. This identifier is defined by the server.
  "insertTime": "A String", # [Output Only] The time that this operation was requested. This value is in RFC3339 text format.
  "kind": "compute#operation", # [Output Only] Type of the resource. Always `compute#operation` for Operation resources.
  "name": "A String", # [Output Only] Name of the operation.
  "operationGroupId": "A String", # [Output Only] An ID that represents a group of operations, such as when a group of operations results from a `bulkInsert` API request.
  "operationType": "A String", # [Output Only] The type of operation, such as `insert`, `update`, or `delete`, and so on.
  "progress": 42, # [Output Only] An optional progress indicator that ranges from 0 to 100. There is no requirement that this be linear or support any granularity of operations. This should not be used to guess when the operation will be complete. This number should monotonically increase as the operation progresses.
  "region": "A String", # [Output Only] The URL of the region where the operation resides. Only applicable when performing regional operations.
  "selfLink": "A String", # [Output Only] Server-defined URL for the resource.
  "startTime": "A String", # [Output Only] The time that this operation was started by the server. This value is in RFC3339 text format.
  "status": "A String", # [Output Only] The status of the operation, which can be one of the following: `PENDING`, `RUNNING`, or `DONE`.
  "statusMessage": "A String", # [Output Only] An optional textual description of the current status of the operation.
  "targetId": "A String", # [Output Only] The unique target ID, which identifies a specific incarnation of the target resource.
  "targetLink": "A String", # [Output Only] The URL of the resource that the operation modifies. For operations related to creating a snapshot, this points to the persistent disk that the snapshot was created from.
  "user": "A String", # [Output Only] User who requested the operation, for example: `user@example.com`.
  "warnings": [ # [Output Only] If warning messages are generated during processing of the operation, this field will be populated.
    {
      "code": "A String", # [Output Only] A warning code, if applicable. For example, Compute Engine returns NO_RESULTS_ON_PAGE if there are no results in the response.
      "data": [ # [Output Only] Metadata about this warning in key: value format. For example: "data": [ { "key": "scope", "value": "zones/us-east1-d" }
        {
          "key": "A String", # [Output Only] A key that provides more detail on the warning being returned. For example, for warnings where there are no results in a list request for a particular zone, this key might be scope and the key value might be the zone name. Other examples might be a key indicating a deprecated resource and a suggested replacement, or a warning about invalid network settings (for example, if an instance attempts to perform IP forwarding but is not enabled for IP forwarding).
          "value": "A String", # [Output Only] A warning data value corresponding to the key.
        },
      ],
      "message": "A String", # [Output Only] A human-readable description of the warning code.
    },
  ],
  "zone": "A String", # [Output Only] The URL of the zone where the operation resides. Only applicable when performing per-zone operations.
}
list(project, filter=None, maxResults=None, orderBy=None, pageToken=None, returnPartialSuccess=None, x__xgafv=None)
List all the policies that have been configured for the specified project.

Args:
  project: string, Project ID for this request. (required)
  filter: string, A filter expression that filters resources listed in the response. Most Compute resources support two types of filter expressions: expressions that support regular expressions and expressions that follow API improvement proposal AIP-160. If you want to use AIP-160, your expression must specify the field name, an operator, and the value that you want to use for filtering. The value must be a string, a number, or a boolean. The operator must be either `=`, `!=`, `>`, `<`, `<=`, `>=` or `:`. For example, if you are filtering Compute Engine instances, you can exclude instances named `example-instance` by specifying `name != example-instance`. The `:` operator can be used with string fields to match substrings. For non-string fields it is equivalent to the `=` operator. The `:*` comparison can be used to test whether a key has been defined. For example, to find all objects with `owner` label use: ``` labels.owner:* ``` You can also filter nested fields. For example, you could specify `scheduling.automaticRestart = false` to include instances only if they are not scheduled for automatic restarts. You can use filtering on nested fields to filter based on resource labels. To filter on multiple expressions, provide each separate expression within parentheses. For example: ``` (scheduling.automaticRestart = true) (cpuPlatform = "Intel Skylake") ``` By default, each expression is an `AND` expression. However, you can include `AND` and `OR` expressions explicitly. For example: ``` (cpuPlatform = "Intel Skylake") OR (cpuPlatform = "Intel Broadwell") AND (scheduling.automaticRestart = true) ``` If you want to use a regular expression, use the `eq` (equal) or `ne` (not equal) operator against a single un-parenthesized expression with or without quotes or against multiple parenthesized expressions. Examples: `fieldname eq unquoted literal` `fieldname eq 'single quoted literal'` `fieldname eq "double quoted literal"` `(fieldname1 eq literal) (fieldname2 ne "literal")` The literal value is interpreted as a regular expression using Google RE2 library syntax. The literal value must match the entire field. For example, to filter for instances that do not end with name "instance", you would use `name ne .*instance`.
  maxResults: integer, The maximum number of results per page that should be returned. If the number of available results is larger than `maxResults`, Compute Engine returns a `nextPageToken` that can be used to get the next page of results in subsequent list requests. Acceptable values are `0` to `500`, inclusive. (Default: `500`)
  orderBy: string, Sorts list results by a certain order. By default, results are returned in alphanumerical order based on the resource name. You can also sort results in descending order based on the creation timestamp using `orderBy="creationTimestamp desc"`. This sorts results based on the `creationTimestamp` field in reverse chronological order (newest result first). Use this to sort resources like operations so that the newest operation is returned first. Currently, only sorting by `name` or `creationTimestamp desc` is supported.
  pageToken: string, Specifies a page token to use. Set `pageToken` to the `nextPageToken` returned by a previous list request to get the next page of results.
  returnPartialSuccess: boolean, Opt-in for partial success behavior which provides partial results in case of failure. The default value is false.
  x__xgafv: string, V1 error format.
    Allowed values
      1 - v1 error format
      2 - v2 error format

Returns:
  An object of the form:

    {
  "id": "A String", # [Output Only] Unique identifier for the resource; defined by the server.
  "items": [ # A list of SecurityPolicy resources.
    { # Represents a Google Cloud Armor security policy resource. Only external backend services that use load balancers can reference a security policy. For more information, see Google Cloud Armor security policy overview.
      "adaptiveProtectionConfig": { # Configuration options for Cloud Armor Adaptive Protection (CAAP).
        "layer7DdosDefenseConfig": { # Configuration options for L7 DDoS detection. # If set to true, enables Cloud Armor Machine Learning.
          "enable": True or False, # If set to true, enables CAAP for L7 DDoS detection.
          "ruleVisibility": "A String", # Rule visibility can be one of the following: STANDARD - opaque rules. (default) PREMIUM - transparent rules.
        },
      },
      "advancedOptionsConfig": {
        "jsonParsing": "A String",
        "logLevel": "A String",
      },
      "creationTimestamp": "A String", # [Output Only] Creation timestamp in RFC3339 text format.
      "ddosProtectionConfig": {
        "ddosProtection": "A String",
      },
      "description": "A String", # An optional description of this resource. Provide this property when you create the resource.
      "fingerprint": "A String", # Specifies a fingerprint for this resource, which is essentially a hash of the metadata's contents and used for optimistic locking. The fingerprint is initially generated by Compute Engine and changes after every request to modify or update metadata. You must always provide an up-to-date fingerprint hash in order to update or change metadata, otherwise the request will fail with error 412 conditionNotMet. To see the latest fingerprint, make get() request to the security policy.
      "id": "A String", # [Output Only] The unique identifier for the resource. This identifier is defined by the server.
      "kind": "compute#securityPolicy", # [Output only] Type of the resource. Always compute#securityPolicyfor security policies
      "name": "A String", # Name of the resource. Provided by the client when the resource is created. The name must be 1-63 characters long, and comply with RFC1035. Specifically, the name must be 1-63 characters long and match the regular expression `[a-z]([-a-z0-9]*[a-z0-9])?` which means the first character must be a lowercase letter, and all following characters must be a dash, lowercase letter, or digit, except the last character, which cannot be a dash.
      "recaptchaOptionsConfig": {
        "redirectSiteKey": "A String", # An optional field to supply a reCAPTCHA site key to be used for all the rules using the redirect action with the type of GOOGLE_RECAPTCHA under the security policy. The specified site key needs to be created from the reCAPTCHA API. The user is responsible for the validity of the specified site key. If not specified, a Google-managed site key is used.
      },
      "region": "A String", # [Output Only] URL of the region where the regional security policy resides. This field is not applicable to global security policies.
      "rules": [ # A list of rules that belong to this policy. There must always be a default rule (rule with priority 2147483647 and match "*"). If no rules are provided when creating a security policy, a default rule with action "allow" will be added.
        { # Represents a rule that describes one or more match conditions along with the action to be taken when traffic matches this condition (allow or deny).
          "action": "A String", # The Action to perform when the rule is matched. The following are the valid actions: - allow: allow access to target. - deny(): deny access to target, returns the HTTP response code specified (valid values are 403, 404, and 502). - rate_based_ban: limit client traffic to the configured threshold and ban the client if the traffic exceeds the threshold. Configure parameters for this action in RateLimitOptions. Requires rate_limit_options to be set. - redirect: redirect to a different target. This can either be an internal reCAPTCHA redirect, or an external URL-based redirect via a 302 response. Parameters for this action can be configured via redirectOptions. - throttle: limit client traffic to the configured threshold. Configure parameters for this action in rateLimitOptions. Requires rate_limit_options to be set for this.
          "description": "A String", # An optional description of this resource. Provide this property when you create the resource.
          "headerAction": { # Optional, additional actions that are performed on headers.
            "requestHeadersToAdds": [ # The list of request headers to add or overwrite if they're already present.
              {
                "headerName": "A String", # The name of the header to set.
                "headerValue": "A String", # The value to set the named header to.
              },
            ],
          },
          "kind": "compute#securityPolicyRule", # [Output only] Type of the resource. Always compute#securityPolicyRule for security policy rules
          "match": { # Represents a match condition that incoming traffic is evaluated against. Exactly one field must be specified. # A match condition that incoming traffic is evaluated against. If it evaluates to true, the corresponding 'action' is enforced.
            "config": { # The configuration options available when specifying versioned_expr. This field must be specified if versioned_expr is specified and cannot be specified if versioned_expr is not specified.
              "srcIpRanges": [ # CIDR IP address range. Maximum number of src_ip_ranges allowed is 10.
                "A String",
              ],
            },
            "expr": { # Represents a textual expression in the Common Expression Language (CEL) syntax. CEL is a C-like expression language. The syntax and semantics of CEL are documented at https://github.com/google/cel-spec. Example (Comparison): title: "Summary size limit" description: "Determines if a summary is less than 100 chars" expression: "document.summary.size() < 100" Example (Equality): title: "Requestor is owner" description: "Determines if requestor is the document owner" expression: "document.owner == request.auth.claims.email" Example (Logic): title: "Public documents" description: "Determine whether the document should be publicly visible" expression: "document.type != 'private' && document.type != 'internal'" Example (Data Manipulation): title: "Notification string" description: "Create a notification string with a timestamp." expression: "'New message received at ' + string(document.create_time)" The exact variables and functions that may be referenced within an expression are determined by the service that evaluates it. See the service documentation for additional information. # User defined CEVAL expression. A CEVAL expression is used to specify match criteria such as origin.ip, source.region_code and contents in the request header.
              "description": "A String", # Optional. Description of the expression. This is a longer text which describes the expression, e.g. when hovered over it in a UI.
              "expression": "A String", # Textual representation of an expression in Common Expression Language syntax.
              "location": "A String", # Optional. String indicating the location of the expression for error reporting, e.g. a file name and a position in the file.
              "title": "A String", # Optional. Title for the expression, i.e. a short string describing its purpose. This can be used e.g. in UIs which allow to enter the expression.
            },
            "versionedExpr": "A String", # Preconfigured versioned expression. If this field is specified, config must also be specified. Available preconfigured expressions along with their requirements are: SRC_IPS_V1 - must specify the corresponding src_ip_range field in config.
          },
          "preview": True or False, # If set to true, the specified action is not enforced.
          "priority": 42, # An integer indicating the priority of a rule in the list. The priority must be a positive value between 0 and 2147483647. Rules are evaluated from highest to lowest priority where 0 is the highest priority and 2147483647 is the lowest priority.
          "rateLimitOptions": { # Must be specified if the action is "rate_based_ban" or "throttle". Cannot be specified for any other actions.
            "banDurationSec": 42, # Can only be specified if the action for the rule is "rate_based_ban". If specified, determines the time (in seconds) the traffic will continue to be banned by the rate limit after the rate falls below the threshold.
            "banThreshold": { # Can only be specified if the action for the rule is "rate_based_ban". If specified, the key will be banned for the configured 'ban_duration_sec' when the number of requests that exceed the 'rate_limit_threshold' also exceed this 'ban_threshold'.
              "count": 42, # Number of HTTP(S) requests for calculating the threshold.
              "intervalSec": 42, # Interval over which the threshold is computed.
            },
            "conformAction": "A String", # Action to take for requests that are under the configured rate limit threshold. Valid option is "allow" only.
            "enforceOnKey": "A String", # Determines the key to enforce the rate_limit_threshold on. Possible values are: - ALL: A single rate limit threshold is applied to all the requests matching this rule. This is the default value if this field 'enforce_on_key' is not configured. - IP: The source IP address of the request is the key. Each IP has this limit enforced separately. - HTTP_HEADER: The value of the HTTP header whose name is configured under "enforce_on_key_name". The key value is truncated to the first 128 bytes of the header value. If no such header is present in the request, the key type defaults to ALL. - XFF_IP: The first IP address (i.e. the originating client IP address) specified in the list of IPs under X-Forwarded-For HTTP header. If no such header is present or the value is not a valid IP, the key defaults to the source IP address of the request i.e. key type IP. - HTTP_COOKIE: The value of the HTTP cookie whose name is configured under "enforce_on_key_name". The key value is truncated to the first 128 bytes of the cookie value. If no such cookie is present in the request, the key type defaults to ALL.
            "enforceOnKeyName": "A String", # Rate limit key name applicable only for the following key types: HTTP_HEADER -- Name of the HTTP header whose value is taken as the key value. HTTP_COOKIE -- Name of the HTTP cookie whose value is taken as the key value.
            "exceedAction": "A String", # Action to take for requests that are above the configured rate limit threshold, to either deny with a specified HTTP response code, or redirect to a different endpoint. Valid options are "deny(status)", where valid values for status are 403, 404, 429, and 502, and "redirect" where the redirect parameters come from exceedRedirectOptions below.
            "exceedRedirectOptions": { # Parameters defining the redirect action that is used as the exceed action. Cannot be specified if the exceed action is not redirect.
              "target": "A String", # Target for the redirect action. This is required if the type is EXTERNAL_302 and cannot be specified for GOOGLE_RECAPTCHA.
              "type": "A String", # Type of the redirect action.
            },
            "rateLimitThreshold": { # Threshold at which to begin ratelimiting.
              "count": 42, # Number of HTTP(S) requests for calculating the threshold.
              "intervalSec": 42, # Interval over which the threshold is computed.
            },
          },
          "redirectOptions": { # Parameters defining the redirect action. Cannot be specified for any other actions.
            "target": "A String", # Target for the redirect action. This is required if the type is EXTERNAL_302 and cannot be specified for GOOGLE_RECAPTCHA.
            "type": "A String", # Type of the redirect action.
          },
        },
      ],
      "selfLink": "A String", # [Output Only] Server-defined URL for the resource.
      "type": "A String", # The type indicates the intended use of the security policy. - CLOUD_ARMOR: Cloud Armor backend security policies can be configured to filter incoming HTTP requests targeting backend services. They filter requests before they hit the origin servers. - CLOUD_ARMOR_EDGE: Cloud Armor edge security policies can be configured to filter incoming HTTP requests targeting backend services (including Cloud CDN-enabled) as well as backend buckets (Cloud Storage). They filter requests before the request is served from Google's cache. - CLOUD_ARMOR_INTERNAL_SERVICE: Cloud Armor internal service policies can be configured to filter HTTP requests targeting services managed by Traffic Director in a service mesh. They filter requests before the request is served from the application. This field can be set only at resource creation time.
    },
  ],
  "kind": "compute#securityPolicyList", # [Output Only] Type of resource. Always compute#securityPolicyList for listsof securityPolicies
  "nextPageToken": "A String", # [Output Only] This token allows you to get the next page of results for list requests. If the number of results is larger than maxResults, use the nextPageToken as a value for the query parameter pageToken in the next list request. Subsequent list requests will have their own nextPageToken to continue paging through the results.
  "warning": { # [Output Only] Informational warning message.
    "code": "A String", # [Output Only] A warning code, if applicable. For example, Compute Engine returns NO_RESULTS_ON_PAGE if there are no results in the response.
    "data": [ # [Output Only] Metadata about this warning in key: value format. For example: "data": [ { "key": "scope", "value": "zones/us-east1-d" }
      {
        "key": "A String", # [Output Only] A key that provides more detail on the warning being returned. For example, for warnings where there are no results in a list request for a particular zone, this key might be scope and the key value might be the zone name. Other examples might be a key indicating a deprecated resource and a suggested replacement, or a warning about invalid network settings (for example, if an instance attempts to perform IP forwarding but is not enabled for IP forwarding).
        "value": "A String", # [Output Only] A warning data value corresponding to the key.
      },
    ],
    "message": "A String", # [Output Only] A human-readable description of the warning code.
  },
}
listPreconfiguredExpressionSets(project, filter=None, maxResults=None, orderBy=None, pageToken=None, returnPartialSuccess=None, x__xgafv=None)
Gets the current list of preconfigured Web Application Firewall (WAF) expressions.

Args:
  project: string, Project ID for this request. (required)
  filter: string, A filter expression that filters resources listed in the response. Most Compute resources support two types of filter expressions: expressions that support regular expressions and expressions that follow API improvement proposal AIP-160. If you want to use AIP-160, your expression must specify the field name, an operator, and the value that you want to use for filtering. The value must be a string, a number, or a boolean. The operator must be either `=`, `!=`, `>`, `<`, `<=`, `>=` or `:`. For example, if you are filtering Compute Engine instances, you can exclude instances named `example-instance` by specifying `name != example-instance`. The `:` operator can be used with string fields to match substrings. For non-string fields it is equivalent to the `=` operator. The `:*` comparison can be used to test whether a key has been defined. For example, to find all objects with `owner` label use: ``` labels.owner:* ``` You can also filter nested fields. For example, you could specify `scheduling.automaticRestart = false` to include instances only if they are not scheduled for automatic restarts. You can use filtering on nested fields to filter based on resource labels. To filter on multiple expressions, provide each separate expression within parentheses. For example: ``` (scheduling.automaticRestart = true) (cpuPlatform = "Intel Skylake") ``` By default, each expression is an `AND` expression. However, you can include `AND` and `OR` expressions explicitly. For example: ``` (cpuPlatform = "Intel Skylake") OR (cpuPlatform = "Intel Broadwell") AND (scheduling.automaticRestart = true) ``` If you want to use a regular expression, use the `eq` (equal) or `ne` (not equal) operator against a single un-parenthesized expression with or without quotes or against multiple parenthesized expressions. Examples: `fieldname eq unquoted literal` `fieldname eq 'single quoted literal'` `fieldname eq "double quoted literal"` `(fieldname1 eq literal) (fieldname2 ne "literal")` The literal value is interpreted as a regular expression using Google RE2 library syntax. The literal value must match the entire field. For example, to filter for instances that do not end with name "instance", you would use `name ne .*instance`.
  maxResults: integer, The maximum number of results per page that should be returned. If the number of available results is larger than `maxResults`, Compute Engine returns a `nextPageToken` that can be used to get the next page of results in subsequent list requests. Acceptable values are `0` to `500`, inclusive. (Default: `500`)
  orderBy: string, Sorts list results by a certain order. By default, results are returned in alphanumerical order based on the resource name. You can also sort results in descending order based on the creation timestamp using `orderBy="creationTimestamp desc"`. This sorts results based on the `creationTimestamp` field in reverse chronological order (newest result first). Use this to sort resources like operations so that the newest operation is returned first. Currently, only sorting by `name` or `creationTimestamp desc` is supported.
  pageToken: string, Specifies a page token to use. Set `pageToken` to the `nextPageToken` returned by a previous list request to get the next page of results.
  returnPartialSuccess: boolean, Opt-in for partial success behavior which provides partial results in case of failure. The default value is false.
  x__xgafv: string, V1 error format.
    Allowed values
      1 - v1 error format
      2 - v2 error format

Returns:
  An object of the form:

    {
  "preconfiguredExpressionSets": {
    "wafRules": {
      "expressionSets": [ # List of entities that are currently supported for WAF rules.
        {
          "aliases": [ # A list of alternate IDs. The format should be: - E.g. XSS-stable Generic suffix like "stable" is particularly useful if a policy likes to avail newer set of expressions without having to change the policy. A given alias name can't be used for more than one entity set.
            "A String",
          ],
          "expressions": [ # List of available expressions.
            {
              "id": "A String", # Expression ID should uniquely identify the origin of the expression. E.g. owasp-crs-v020901-id973337 identifies Owasp core rule set version 2.9.1 rule id 973337. The ID could be used to determine the individual attack definition that has been detected. It could also be used to exclude it from the policy in case of false positive. required
            },
          ],
          "id": "A String", # Google specified expression set ID. The format should be: - E.g. XSS-20170329 required
        },
      ],
    },
  },
}
list_next()
Retrieves the next page of results.

        Args:
          previous_request: The request for the previous page. (required)
          previous_response: The response from the request for the previous page. (required)

        Returns:
          A request object that you can call 'execute()' on to request the next
          page. Returns None if there are no more items in the collection.
        
patch(project, securityPolicy, body=None, requestId=None, x__xgafv=None)
Patches the specified policy with the data included in the request. This cannot be used to be update the rules in the policy. Please use the per rule methods like addRule, patchRule, and removeRule instead.

Args:
  project: string, Project ID for this request. (required)
  securityPolicy: string, Name of the security policy to update. (required)
  body: object, The request body.
    The object takes the form of:

{ # Represents a Google Cloud Armor security policy resource. Only external backend services that use load balancers can reference a security policy. For more information, see Google Cloud Armor security policy overview.
  "adaptiveProtectionConfig": { # Configuration options for Cloud Armor Adaptive Protection (CAAP).
    "layer7DdosDefenseConfig": { # Configuration options for L7 DDoS detection. # If set to true, enables Cloud Armor Machine Learning.
      "enable": True or False, # If set to true, enables CAAP for L7 DDoS detection.
      "ruleVisibility": "A String", # Rule visibility can be one of the following: STANDARD - opaque rules. (default) PREMIUM - transparent rules.
    },
  },
  "advancedOptionsConfig": {
    "jsonParsing": "A String",
    "logLevel": "A String",
  },
  "creationTimestamp": "A String", # [Output Only] Creation timestamp in RFC3339 text format.
  "ddosProtectionConfig": {
    "ddosProtection": "A String",
  },
  "description": "A String", # An optional description of this resource. Provide this property when you create the resource.
  "fingerprint": "A String", # Specifies a fingerprint for this resource, which is essentially a hash of the metadata's contents and used for optimistic locking. The fingerprint is initially generated by Compute Engine and changes after every request to modify or update metadata. You must always provide an up-to-date fingerprint hash in order to update or change metadata, otherwise the request will fail with error 412 conditionNotMet. To see the latest fingerprint, make get() request to the security policy.
  "id": "A String", # [Output Only] The unique identifier for the resource. This identifier is defined by the server.
  "kind": "compute#securityPolicy", # [Output only] Type of the resource. Always compute#securityPolicyfor security policies
  "name": "A String", # Name of the resource. Provided by the client when the resource is created. The name must be 1-63 characters long, and comply with RFC1035. Specifically, the name must be 1-63 characters long and match the regular expression `[a-z]([-a-z0-9]*[a-z0-9])?` which means the first character must be a lowercase letter, and all following characters must be a dash, lowercase letter, or digit, except the last character, which cannot be a dash.
  "recaptchaOptionsConfig": {
    "redirectSiteKey": "A String", # An optional field to supply a reCAPTCHA site key to be used for all the rules using the redirect action with the type of GOOGLE_RECAPTCHA under the security policy. The specified site key needs to be created from the reCAPTCHA API. The user is responsible for the validity of the specified site key. If not specified, a Google-managed site key is used.
  },
  "region": "A String", # [Output Only] URL of the region where the regional security policy resides. This field is not applicable to global security policies.
  "rules": [ # A list of rules that belong to this policy. There must always be a default rule (rule with priority 2147483647 and match "*"). If no rules are provided when creating a security policy, a default rule with action "allow" will be added.
    { # Represents a rule that describes one or more match conditions along with the action to be taken when traffic matches this condition (allow or deny).
      "action": "A String", # The Action to perform when the rule is matched. The following are the valid actions: - allow: allow access to target. - deny(): deny access to target, returns the HTTP response code specified (valid values are 403, 404, and 502). - rate_based_ban: limit client traffic to the configured threshold and ban the client if the traffic exceeds the threshold. Configure parameters for this action in RateLimitOptions. Requires rate_limit_options to be set. - redirect: redirect to a different target. This can either be an internal reCAPTCHA redirect, or an external URL-based redirect via a 302 response. Parameters for this action can be configured via redirectOptions. - throttle: limit client traffic to the configured threshold. Configure parameters for this action in rateLimitOptions. Requires rate_limit_options to be set for this.
      "description": "A String", # An optional description of this resource. Provide this property when you create the resource.
      "headerAction": { # Optional, additional actions that are performed on headers.
        "requestHeadersToAdds": [ # The list of request headers to add or overwrite if they're already present.
          {
            "headerName": "A String", # The name of the header to set.
            "headerValue": "A String", # The value to set the named header to.
          },
        ],
      },
      "kind": "compute#securityPolicyRule", # [Output only] Type of the resource. Always compute#securityPolicyRule for security policy rules
      "match": { # Represents a match condition that incoming traffic is evaluated against. Exactly one field must be specified. # A match condition that incoming traffic is evaluated against. If it evaluates to true, the corresponding 'action' is enforced.
        "config": { # The configuration options available when specifying versioned_expr. This field must be specified if versioned_expr is specified and cannot be specified if versioned_expr is not specified.
          "srcIpRanges": [ # CIDR IP address range. Maximum number of src_ip_ranges allowed is 10.
            "A String",
          ],
        },
        "expr": { # Represents a textual expression in the Common Expression Language (CEL) syntax. CEL is a C-like expression language. The syntax and semantics of CEL are documented at https://github.com/google/cel-spec. Example (Comparison): title: "Summary size limit" description: "Determines if a summary is less than 100 chars" expression: "document.summary.size() < 100" Example (Equality): title: "Requestor is owner" description: "Determines if requestor is the document owner" expression: "document.owner == request.auth.claims.email" Example (Logic): title: "Public documents" description: "Determine whether the document should be publicly visible" expression: "document.type != 'private' && document.type != 'internal'" Example (Data Manipulation): title: "Notification string" description: "Create a notification string with a timestamp." expression: "'New message received at ' + string(document.create_time)" The exact variables and functions that may be referenced within an expression are determined by the service that evaluates it. See the service documentation for additional information. # User defined CEVAL expression. A CEVAL expression is used to specify match criteria such as origin.ip, source.region_code and contents in the request header.
          "description": "A String", # Optional. Description of the expression. This is a longer text which describes the expression, e.g. when hovered over it in a UI.
          "expression": "A String", # Textual representation of an expression in Common Expression Language syntax.
          "location": "A String", # Optional. String indicating the location of the expression for error reporting, e.g. a file name and a position in the file.
          "title": "A String", # Optional. Title for the expression, i.e. a short string describing its purpose. This can be used e.g. in UIs which allow to enter the expression.
        },
        "versionedExpr": "A String", # Preconfigured versioned expression. If this field is specified, config must also be specified. Available preconfigured expressions along with their requirements are: SRC_IPS_V1 - must specify the corresponding src_ip_range field in config.
      },
      "preview": True or False, # If set to true, the specified action is not enforced.
      "priority": 42, # An integer indicating the priority of a rule in the list. The priority must be a positive value between 0 and 2147483647. Rules are evaluated from highest to lowest priority where 0 is the highest priority and 2147483647 is the lowest priority.
      "rateLimitOptions": { # Must be specified if the action is "rate_based_ban" or "throttle". Cannot be specified for any other actions.
        "banDurationSec": 42, # Can only be specified if the action for the rule is "rate_based_ban". If specified, determines the time (in seconds) the traffic will continue to be banned by the rate limit after the rate falls below the threshold.
        "banThreshold": { # Can only be specified if the action for the rule is "rate_based_ban". If specified, the key will be banned for the configured 'ban_duration_sec' when the number of requests that exceed the 'rate_limit_threshold' also exceed this 'ban_threshold'.
          "count": 42, # Number of HTTP(S) requests for calculating the threshold.
          "intervalSec": 42, # Interval over which the threshold is computed.
        },
        "conformAction": "A String", # Action to take for requests that are under the configured rate limit threshold. Valid option is "allow" only.
        "enforceOnKey": "A String", # Determines the key to enforce the rate_limit_threshold on. Possible values are: - ALL: A single rate limit threshold is applied to all the requests matching this rule. This is the default value if this field 'enforce_on_key' is not configured. - IP: The source IP address of the request is the key. Each IP has this limit enforced separately. - HTTP_HEADER: The value of the HTTP header whose name is configured under "enforce_on_key_name". The key value is truncated to the first 128 bytes of the header value. If no such header is present in the request, the key type defaults to ALL. - XFF_IP: The first IP address (i.e. the originating client IP address) specified in the list of IPs under X-Forwarded-For HTTP header. If no such header is present or the value is not a valid IP, the key defaults to the source IP address of the request i.e. key type IP. - HTTP_COOKIE: The value of the HTTP cookie whose name is configured under "enforce_on_key_name". The key value is truncated to the first 128 bytes of the cookie value. If no such cookie is present in the request, the key type defaults to ALL.
        "enforceOnKeyName": "A String", # Rate limit key name applicable only for the following key types: HTTP_HEADER -- Name of the HTTP header whose value is taken as the key value. HTTP_COOKIE -- Name of the HTTP cookie whose value is taken as the key value.
        "exceedAction": "A String", # Action to take for requests that are above the configured rate limit threshold, to either deny with a specified HTTP response code, or redirect to a different endpoint. Valid options are "deny(status)", where valid values for status are 403, 404, 429, and 502, and "redirect" where the redirect parameters come from exceedRedirectOptions below.
        "exceedRedirectOptions": { # Parameters defining the redirect action that is used as the exceed action. Cannot be specified if the exceed action is not redirect.
          "target": "A String", # Target for the redirect action. This is required if the type is EXTERNAL_302 and cannot be specified for GOOGLE_RECAPTCHA.
          "type": "A String", # Type of the redirect action.
        },
        "rateLimitThreshold": { # Threshold at which to begin ratelimiting.
          "count": 42, # Number of HTTP(S) requests for calculating the threshold.
          "intervalSec": 42, # Interval over which the threshold is computed.
        },
      },
      "redirectOptions": { # Parameters defining the redirect action. Cannot be specified for any other actions.
        "target": "A String", # Target for the redirect action. This is required if the type is EXTERNAL_302 and cannot be specified for GOOGLE_RECAPTCHA.
        "type": "A String", # Type of the redirect action.
      },
    },
  ],
  "selfLink": "A String", # [Output Only] Server-defined URL for the resource.
  "type": "A String", # The type indicates the intended use of the security policy. - CLOUD_ARMOR: Cloud Armor backend security policies can be configured to filter incoming HTTP requests targeting backend services. They filter requests before they hit the origin servers. - CLOUD_ARMOR_EDGE: Cloud Armor edge security policies can be configured to filter incoming HTTP requests targeting backend services (including Cloud CDN-enabled) as well as backend buckets (Cloud Storage). They filter requests before the request is served from Google's cache. - CLOUD_ARMOR_INTERNAL_SERVICE: Cloud Armor internal service policies can be configured to filter HTTP requests targeting services managed by Traffic Director in a service mesh. They filter requests before the request is served from the application. This field can be set only at resource creation time.
}

  requestId: string, An optional request ID to identify requests. Specify a unique request ID so that if you must retry your request, the server will know to ignore the request if it has already been completed. For example, consider a situation where you make an initial request and the request times out. If you make the request again with the same request ID, the server can check if original operation with the same request ID was received, and if so, will ignore the second request. This prevents clients from accidentally creating duplicate commitments. The request ID must be a valid UUID with the exception that zero UUID is not supported ( 00000000-0000-0000-0000-000000000000).
  x__xgafv: string, V1 error format.
    Allowed values
      1 - v1 error format
      2 - v2 error format

Returns:
  An object of the form:

    { # Represents an Operation resource. Google Compute Engine has three Operation resources: * [Global](/compute/docs/reference/rest/v1/globalOperations) * [Regional](/compute/docs/reference/rest/v1/regionOperations) * [Zonal](/compute/docs/reference/rest/v1/zoneOperations) You can use an operation resource to manage asynchronous API requests. For more information, read Handling API responses. Operations can be global, regional or zonal. - For global operations, use the `globalOperations` resource. - For regional operations, use the `regionOperations` resource. - For zonal operations, use the `zonalOperations` resource. For more information, read Global, Regional, and Zonal Resources.
  "clientOperationId": "A String", # [Output Only] The value of `requestId` if you provided it in the request. Not present otherwise.
  "creationTimestamp": "A String", # [Deprecated] This field is deprecated.
  "description": "A String", # [Output Only] A textual description of the operation, which is set when the operation is created.
  "endTime": "A String", # [Output Only] The time that this operation was completed. This value is in RFC3339 text format.
  "error": { # [Output Only] If errors are generated during processing of the operation, this field will be populated.
    "errors": [ # [Output Only] The array of errors encountered while processing this operation.
      {
        "code": "A String", # [Output Only] The error type identifier for this error.
        "location": "A String", # [Output Only] Indicates the field in the request that caused the error. This property is optional.
        "message": "A String", # [Output Only] An optional, human-readable error message.
      },
    ],
  },
  "httpErrorMessage": "A String", # [Output Only] If the operation fails, this field contains the HTTP error message that was returned, such as `NOT FOUND`.
  "httpErrorStatusCode": 42, # [Output Only] If the operation fails, this field contains the HTTP error status code that was returned. For example, a `404` means the resource was not found.
  "id": "A String", # [Output Only] The unique identifier for the operation. This identifier is defined by the server.
  "insertTime": "A String", # [Output Only] The time that this operation was requested. This value is in RFC3339 text format.
  "kind": "compute#operation", # [Output Only] Type of the resource. Always `compute#operation` for Operation resources.
  "name": "A String", # [Output Only] Name of the operation.
  "operationGroupId": "A String", # [Output Only] An ID that represents a group of operations, such as when a group of operations results from a `bulkInsert` API request.
  "operationType": "A String", # [Output Only] The type of operation, such as `insert`, `update`, or `delete`, and so on.
  "progress": 42, # [Output Only] An optional progress indicator that ranges from 0 to 100. There is no requirement that this be linear or support any granularity of operations. This should not be used to guess when the operation will be complete. This number should monotonically increase as the operation progresses.
  "region": "A String", # [Output Only] The URL of the region where the operation resides. Only applicable when performing regional operations.
  "selfLink": "A String", # [Output Only] Server-defined URL for the resource.
  "startTime": "A String", # [Output Only] The time that this operation was started by the server. This value is in RFC3339 text format.
  "status": "A String", # [Output Only] The status of the operation, which can be one of the following: `PENDING`, `RUNNING`, or `DONE`.
  "statusMessage": "A String", # [Output Only] An optional textual description of the current status of the operation.
  "targetId": "A String", # [Output Only] The unique target ID, which identifies a specific incarnation of the target resource.
  "targetLink": "A String", # [Output Only] The URL of the resource that the operation modifies. For operations related to creating a snapshot, this points to the persistent disk that the snapshot was created from.
  "user": "A String", # [Output Only] User who requested the operation, for example: `user@example.com`.
  "warnings": [ # [Output Only] If warning messages are generated during processing of the operation, this field will be populated.
    {
      "code": "A String", # [Output Only] A warning code, if applicable. For example, Compute Engine returns NO_RESULTS_ON_PAGE if there are no results in the response.
      "data": [ # [Output Only] Metadata about this warning in key: value format. For example: "data": [ { "key": "scope", "value": "zones/us-east1-d" }
        {
          "key": "A String", # [Output Only] A key that provides more detail on the warning being returned. For example, for warnings where there are no results in a list request for a particular zone, this key might be scope and the key value might be the zone name. Other examples might be a key indicating a deprecated resource and a suggested replacement, or a warning about invalid network settings (for example, if an instance attempts to perform IP forwarding but is not enabled for IP forwarding).
          "value": "A String", # [Output Only] A warning data value corresponding to the key.
        },
      ],
      "message": "A String", # [Output Only] A human-readable description of the warning code.
    },
  ],
  "zone": "A String", # [Output Only] The URL of the zone where the operation resides. Only applicable when performing per-zone operations.
}
patchRule(project, securityPolicy, body=None, priority=None, validateOnly=None, x__xgafv=None)
Patches a rule at the specified priority.

Args:
  project: string, Project ID for this request. (required)
  securityPolicy: string, Name of the security policy to update. (required)
  body: object, The request body.
    The object takes the form of:

{ # Represents a rule that describes one or more match conditions along with the action to be taken when traffic matches this condition (allow or deny).
  "action": "A String", # The Action to perform when the rule is matched. The following are the valid actions: - allow: allow access to target. - deny(): deny access to target, returns the HTTP response code specified (valid values are 403, 404, and 502). - rate_based_ban: limit client traffic to the configured threshold and ban the client if the traffic exceeds the threshold. Configure parameters for this action in RateLimitOptions. Requires rate_limit_options to be set. - redirect: redirect to a different target. This can either be an internal reCAPTCHA redirect, or an external URL-based redirect via a 302 response. Parameters for this action can be configured via redirectOptions. - throttle: limit client traffic to the configured threshold. Configure parameters for this action in rateLimitOptions. Requires rate_limit_options to be set for this.
  "description": "A String", # An optional description of this resource. Provide this property when you create the resource.
  "headerAction": { # Optional, additional actions that are performed on headers.
    "requestHeadersToAdds": [ # The list of request headers to add or overwrite if they're already present.
      {
        "headerName": "A String", # The name of the header to set.
        "headerValue": "A String", # The value to set the named header to.
      },
    ],
  },
  "kind": "compute#securityPolicyRule", # [Output only] Type of the resource. Always compute#securityPolicyRule for security policy rules
  "match": { # Represents a match condition that incoming traffic is evaluated against. Exactly one field must be specified. # A match condition that incoming traffic is evaluated against. If it evaluates to true, the corresponding 'action' is enforced.
    "config": { # The configuration options available when specifying versioned_expr. This field must be specified if versioned_expr is specified and cannot be specified if versioned_expr is not specified.
      "srcIpRanges": [ # CIDR IP address range. Maximum number of src_ip_ranges allowed is 10.
        "A String",
      ],
    },
    "expr": { # Represents a textual expression in the Common Expression Language (CEL) syntax. CEL is a C-like expression language. The syntax and semantics of CEL are documented at https://github.com/google/cel-spec. Example (Comparison): title: "Summary size limit" description: "Determines if a summary is less than 100 chars" expression: "document.summary.size() < 100" Example (Equality): title: "Requestor is owner" description: "Determines if requestor is the document owner" expression: "document.owner == request.auth.claims.email" Example (Logic): title: "Public documents" description: "Determine whether the document should be publicly visible" expression: "document.type != 'private' && document.type != 'internal'" Example (Data Manipulation): title: "Notification string" description: "Create a notification string with a timestamp." expression: "'New message received at ' + string(document.create_time)" The exact variables and functions that may be referenced within an expression are determined by the service that evaluates it. See the service documentation for additional information. # User defined CEVAL expression. A CEVAL expression is used to specify match criteria such as origin.ip, source.region_code and contents in the request header.
      "description": "A String", # Optional. Description of the expression. This is a longer text which describes the expression, e.g. when hovered over it in a UI.
      "expression": "A String", # Textual representation of an expression in Common Expression Language syntax.
      "location": "A String", # Optional. String indicating the location of the expression for error reporting, e.g. a file name and a position in the file.
      "title": "A String", # Optional. Title for the expression, i.e. a short string describing its purpose. This can be used e.g. in UIs which allow to enter the expression.
    },
    "versionedExpr": "A String", # Preconfigured versioned expression. If this field is specified, config must also be specified. Available preconfigured expressions along with their requirements are: SRC_IPS_V1 - must specify the corresponding src_ip_range field in config.
  },
  "preview": True or False, # If set to true, the specified action is not enforced.
  "priority": 42, # An integer indicating the priority of a rule in the list. The priority must be a positive value between 0 and 2147483647. Rules are evaluated from highest to lowest priority where 0 is the highest priority and 2147483647 is the lowest priority.
  "rateLimitOptions": { # Must be specified if the action is "rate_based_ban" or "throttle". Cannot be specified for any other actions.
    "banDurationSec": 42, # Can only be specified if the action for the rule is "rate_based_ban". If specified, determines the time (in seconds) the traffic will continue to be banned by the rate limit after the rate falls below the threshold.
    "banThreshold": { # Can only be specified if the action for the rule is "rate_based_ban". If specified, the key will be banned for the configured 'ban_duration_sec' when the number of requests that exceed the 'rate_limit_threshold' also exceed this 'ban_threshold'.
      "count": 42, # Number of HTTP(S) requests for calculating the threshold.
      "intervalSec": 42, # Interval over which the threshold is computed.
    },
    "conformAction": "A String", # Action to take for requests that are under the configured rate limit threshold. Valid option is "allow" only.
    "enforceOnKey": "A String", # Determines the key to enforce the rate_limit_threshold on. Possible values are: - ALL: A single rate limit threshold is applied to all the requests matching this rule. This is the default value if this field 'enforce_on_key' is not configured. - IP: The source IP address of the request is the key. Each IP has this limit enforced separately. - HTTP_HEADER: The value of the HTTP header whose name is configured under "enforce_on_key_name". The key value is truncated to the first 128 bytes of the header value. If no such header is present in the request, the key type defaults to ALL. - XFF_IP: The first IP address (i.e. the originating client IP address) specified in the list of IPs under X-Forwarded-For HTTP header. If no such header is present or the value is not a valid IP, the key defaults to the source IP address of the request i.e. key type IP. - HTTP_COOKIE: The value of the HTTP cookie whose name is configured under "enforce_on_key_name". The key value is truncated to the first 128 bytes of the cookie value. If no such cookie is present in the request, the key type defaults to ALL.
    "enforceOnKeyName": "A String", # Rate limit key name applicable only for the following key types: HTTP_HEADER -- Name of the HTTP header whose value is taken as the key value. HTTP_COOKIE -- Name of the HTTP cookie whose value is taken as the key value.
    "exceedAction": "A String", # Action to take for requests that are above the configured rate limit threshold, to either deny with a specified HTTP response code, or redirect to a different endpoint. Valid options are "deny(status)", where valid values for status are 403, 404, 429, and 502, and "redirect" where the redirect parameters come from exceedRedirectOptions below.
    "exceedRedirectOptions": { # Parameters defining the redirect action that is used as the exceed action. Cannot be specified if the exceed action is not redirect.
      "target": "A String", # Target for the redirect action. This is required if the type is EXTERNAL_302 and cannot be specified for GOOGLE_RECAPTCHA.
      "type": "A String", # Type of the redirect action.
    },
    "rateLimitThreshold": { # Threshold at which to begin ratelimiting.
      "count": 42, # Number of HTTP(S) requests for calculating the threshold.
      "intervalSec": 42, # Interval over which the threshold is computed.
    },
  },
  "redirectOptions": { # Parameters defining the redirect action. Cannot be specified for any other actions.
    "target": "A String", # Target for the redirect action. This is required if the type is EXTERNAL_302 and cannot be specified for GOOGLE_RECAPTCHA.
    "type": "A String", # Type of the redirect action.
  },
}

  priority: integer, The priority of the rule to patch.
  validateOnly: boolean, If true, the request will not be committed.
  x__xgafv: string, V1 error format.
    Allowed values
      1 - v1 error format
      2 - v2 error format

Returns:
  An object of the form:

    { # Represents an Operation resource. Google Compute Engine has three Operation resources: * [Global](/compute/docs/reference/rest/v1/globalOperations) * [Regional](/compute/docs/reference/rest/v1/regionOperations) * [Zonal](/compute/docs/reference/rest/v1/zoneOperations) You can use an operation resource to manage asynchronous API requests. For more information, read Handling API responses. Operations can be global, regional or zonal. - For global operations, use the `globalOperations` resource. - For regional operations, use the `regionOperations` resource. - For zonal operations, use the `zonalOperations` resource. For more information, read Global, Regional, and Zonal Resources.
  "clientOperationId": "A String", # [Output Only] The value of `requestId` if you provided it in the request. Not present otherwise.
  "creationTimestamp": "A String", # [Deprecated] This field is deprecated.
  "description": "A String", # [Output Only] A textual description of the operation, which is set when the operation is created.
  "endTime": "A String", # [Output Only] The time that this operation was completed. This value is in RFC3339 text format.
  "error": { # [Output Only] If errors are generated during processing of the operation, this field will be populated.
    "errors": [ # [Output Only] The array of errors encountered while processing this operation.
      {
        "code": "A String", # [Output Only] The error type identifier for this error.
        "location": "A String", # [Output Only] Indicates the field in the request that caused the error. This property is optional.
        "message": "A String", # [Output Only] An optional, human-readable error message.
      },
    ],
  },
  "httpErrorMessage": "A String", # [Output Only] If the operation fails, this field contains the HTTP error message that was returned, such as `NOT FOUND`.
  "httpErrorStatusCode": 42, # [Output Only] If the operation fails, this field contains the HTTP error status code that was returned. For example, a `404` means the resource was not found.
  "id": "A String", # [Output Only] The unique identifier for the operation. This identifier is defined by the server.
  "insertTime": "A String", # [Output Only] The time that this operation was requested. This value is in RFC3339 text format.
  "kind": "compute#operation", # [Output Only] Type of the resource. Always `compute#operation` for Operation resources.
  "name": "A String", # [Output Only] Name of the operation.
  "operationGroupId": "A String", # [Output Only] An ID that represents a group of operations, such as when a group of operations results from a `bulkInsert` API request.
  "operationType": "A String", # [Output Only] The type of operation, such as `insert`, `update`, or `delete`, and so on.
  "progress": 42, # [Output Only] An optional progress indicator that ranges from 0 to 100. There is no requirement that this be linear or support any granularity of operations. This should not be used to guess when the operation will be complete. This number should monotonically increase as the operation progresses.
  "region": "A String", # [Output Only] The URL of the region where the operation resides. Only applicable when performing regional operations.
  "selfLink": "A String", # [Output Only] Server-defined URL for the resource.
  "startTime": "A String", # [Output Only] The time that this operation was started by the server. This value is in RFC3339 text format.
  "status": "A String", # [Output Only] The status of the operation, which can be one of the following: `PENDING`, `RUNNING`, or `DONE`.
  "statusMessage": "A String", # [Output Only] An optional textual description of the current status of the operation.
  "targetId": "A String", # [Output Only] The unique target ID, which identifies a specific incarnation of the target resource.
  "targetLink": "A String", # [Output Only] The URL of the resource that the operation modifies. For operations related to creating a snapshot, this points to the persistent disk that the snapshot was created from.
  "user": "A String", # [Output Only] User who requested the operation, for example: `user@example.com`.
  "warnings": [ # [Output Only] If warning messages are generated during processing of the operation, this field will be populated.
    {
      "code": "A String", # [Output Only] A warning code, if applicable. For example, Compute Engine returns NO_RESULTS_ON_PAGE if there are no results in the response.
      "data": [ # [Output Only] Metadata about this warning in key: value format. For example: "data": [ { "key": "scope", "value": "zones/us-east1-d" }
        {
          "key": "A String", # [Output Only] A key that provides more detail on the warning being returned. For example, for warnings where there are no results in a list request for a particular zone, this key might be scope and the key value might be the zone name. Other examples might be a key indicating a deprecated resource and a suggested replacement, or a warning about invalid network settings (for example, if an instance attempts to perform IP forwarding but is not enabled for IP forwarding).
          "value": "A String", # [Output Only] A warning data value corresponding to the key.
        },
      ],
      "message": "A String", # [Output Only] A human-readable description of the warning code.
    },
  ],
  "zone": "A String", # [Output Only] The URL of the zone where the operation resides. Only applicable when performing per-zone operations.
}
removeRule(project, securityPolicy, priority=None, x__xgafv=None)
Deletes a rule at the specified priority.

Args:
  project: string, Project ID for this request. (required)
  securityPolicy: string, Name of the security policy to update. (required)
  priority: integer, The priority of the rule to remove from the security policy.
  x__xgafv: string, V1 error format.
    Allowed values
      1 - v1 error format
      2 - v2 error format

Returns:
  An object of the form:

    { # Represents an Operation resource. Google Compute Engine has three Operation resources: * [Global](/compute/docs/reference/rest/v1/globalOperations) * [Regional](/compute/docs/reference/rest/v1/regionOperations) * [Zonal](/compute/docs/reference/rest/v1/zoneOperations) You can use an operation resource to manage asynchronous API requests. For more information, read Handling API responses. Operations can be global, regional or zonal. - For global operations, use the `globalOperations` resource. - For regional operations, use the `regionOperations` resource. - For zonal operations, use the `zonalOperations` resource. For more information, read Global, Regional, and Zonal Resources.
  "clientOperationId": "A String", # [Output Only] The value of `requestId` if you provided it in the request. Not present otherwise.
  "creationTimestamp": "A String", # [Deprecated] This field is deprecated.
  "description": "A String", # [Output Only] A textual description of the operation, which is set when the operation is created.
  "endTime": "A String", # [Output Only] The time that this operation was completed. This value is in RFC3339 text format.
  "error": { # [Output Only] If errors are generated during processing of the operation, this field will be populated.
    "errors": [ # [Output Only] The array of errors encountered while processing this operation.
      {
        "code": "A String", # [Output Only] The error type identifier for this error.
        "location": "A String", # [Output Only] Indicates the field in the request that caused the error. This property is optional.
        "message": "A String", # [Output Only] An optional, human-readable error message.
      },
    ],
  },
  "httpErrorMessage": "A String", # [Output Only] If the operation fails, this field contains the HTTP error message that was returned, such as `NOT FOUND`.
  "httpErrorStatusCode": 42, # [Output Only] If the operation fails, this field contains the HTTP error status code that was returned. For example, a `404` means the resource was not found.
  "id": "A String", # [Output Only] The unique identifier for the operation. This identifier is defined by the server.
  "insertTime": "A String", # [Output Only] The time that this operation was requested. This value is in RFC3339 text format.
  "kind": "compute#operation", # [Output Only] Type of the resource. Always `compute#operation` for Operation resources.
  "name": "A String", # [Output Only] Name of the operation.
  "operationGroupId": "A String", # [Output Only] An ID that represents a group of operations, such as when a group of operations results from a `bulkInsert` API request.
  "operationType": "A String", # [Output Only] The type of operation, such as `insert`, `update`, or `delete`, and so on.
  "progress": 42, # [Output Only] An optional progress indicator that ranges from 0 to 100. There is no requirement that this be linear or support any granularity of operations. This should not be used to guess when the operation will be complete. This number should monotonically increase as the operation progresses.
  "region": "A String", # [Output Only] The URL of the region where the operation resides. Only applicable when performing regional operations.
  "selfLink": "A String", # [Output Only] Server-defined URL for the resource.
  "startTime": "A String", # [Output Only] The time that this operation was started by the server. This value is in RFC3339 text format.
  "status": "A String", # [Output Only] The status of the operation, which can be one of the following: `PENDING`, `RUNNING`, or `DONE`.
  "statusMessage": "A String", # [Output Only] An optional textual description of the current status of the operation.
  "targetId": "A String", # [Output Only] The unique target ID, which identifies a specific incarnation of the target resource.
  "targetLink": "A String", # [Output Only] The URL of the resource that the operation modifies. For operations related to creating a snapshot, this points to the persistent disk that the snapshot was created from.
  "user": "A String", # [Output Only] User who requested the operation, for example: `user@example.com`.
  "warnings": [ # [Output Only] If warning messages are generated during processing of the operation, this field will be populated.
    {
      "code": "A String", # [Output Only] A warning code, if applicable. For example, Compute Engine returns NO_RESULTS_ON_PAGE if there are no results in the response.
      "data": [ # [Output Only] Metadata about this warning in key: value format. For example: "data": [ { "key": "scope", "value": "zones/us-east1-d" }
        {
          "key": "A String", # [Output Only] A key that provides more detail on the warning being returned. For example, for warnings where there are no results in a list request for a particular zone, this key might be scope and the key value might be the zone name. Other examples might be a key indicating a deprecated resource and a suggested replacement, or a warning about invalid network settings (for example, if an instance attempts to perform IP forwarding but is not enabled for IP forwarding).
          "value": "A String", # [Output Only] A warning data value corresponding to the key.
        },
      ],
      "message": "A String", # [Output Only] A human-readable description of the warning code.
    },
  ],
  "zone": "A String", # [Output Only] The URL of the zone where the operation resides. Only applicable when performing per-zone operations.
}