Close httplib2 connections.
list(parent, filter=None, pageSize=None, pageToken=None, x__xgafv=None)
Lists anomalies in any of the datasets.
Retrieves the next page of results.
close()
Close httplib2 connections.
list(parent, filter=None, pageSize=None, pageToken=None, x__xgafv=None)
Lists anomalies in any of the datasets.
Args:
parent: string, Required. Parent app for which anomalies were detected. Format: apps/{app} (required)
filter: string, Filtering criteria for anomalies. For basic filter guidance, please check: https://google.aip.dev/160. **Supported functions:** * `activeBetween(startTime, endTime)`: If specified, only list anomalies that were active in between `startTime` (inclusive) and `endTime` (exclusive). Both parameters are expected to conform to an RFC-3339 formatted string (e.g. `2012-04-21T11:30:00-04:00`). UTC offsets are supported. Both `startTime` and `endTime` accept the special value `UNBOUNDED`, to signify intervals with no lower or upper bound, respectively. Examples: * `activeBetween("2021-04-21T11:30:00Z", "2021-07-21T00:00:00Z")` * `activeBetween(UNBOUNDED, "2021-11-21T00:00:00-04:00")` * `activeBetween("2021-07-21T00:00:00-04:00", UNBOUNDED)`
pageSize: integer, Maximum size of the returned data. If unspecified, at most 10 anomalies will be returned. The maximum value is 100; values above 100 will be coerced to 100.
pageToken: string, A page token, received from a previous `ListErrorReports` call. Provide this to retrieve the subsequent page. When paginating, all other parameters provided to `ListErrorReports` must match the call that provided the page token.
x__xgafv: string, V1 error format.
Allowed values
1 - v1 error format
2 - v2 error format
Returns:
An object of the form:
{ # Response with a list of anomalies in datasets.
"anomalies": [ # Anomalies that were found.
{ # Represents an anomaly detected in a dataset. Our anomaly detection systems flag datapoints in a time series that fall outside of and expected range derived from historical data. Although those expected ranges have an upper and a lower bound, we only flag anomalies when the data has become unexpectedly _worse_, which usually corresponds to the case where the metric crosses the upper bound. Multiple contiguous datapoints in a timeline outside of the expected range will be grouped into a single anomaly. Therefore, an anomaly represents effectively a segment of a metric's timeline. The information stored in the `timeline_spec`, `dimensions` and `metric` can be used to fetch a full timeline with extended ragne for context. **Required permissions**: to access this resource, the calling user needs the _View app information (read-only)_ permission for the app.
"dimensions": [ # Combination of dimensions in which the anomaly was detected.
{ # Represents the value of a single dimension.
"dimension": "A String", # Name of the dimension.
"int64Value": "A String", # Actual value, represented as an int64.
"stringValue": "A String", # Actual value, represented as a string.
"valueLabel": "A String", # Optional. Human-friendly label for the value, always in English. For example, 'Spain' for the 'ES' country code. Whereas the dimension value is stable, this value label is subject to change. Do not assume that the (value, value_label) relationship is stable. For example, the ISO country code 'MK' changed its name recently to 'North Macedonia'.
},
],
"metric": { # Represents the value of a metric. # Metric where the anomaly was detected, together with the anomalous value.
"decimalValue": { # A representation of a decimal value, such as 2.5. Clients may convert values into language-native decimal formats, such as Java's [BigDecimal](https://docs.oracle.com/en/java/javase/11/docs/api/java.base/java/math/BigDecimal.html) or Python's [decimal.Decimal](https://docs.python.org/3/library/decimal.html). # Actual value, represented as a decimal number.
"value": "A String", # The decimal value, as a string. The string representation consists of an optional sign, `+` (`U+002B`) or `-` (`U+002D`), followed by a sequence of zero or more decimal digits ("the integer"), optionally followed by a fraction, optionally followed by an exponent. An empty string **should** be interpreted as `0`. The fraction consists of a decimal point followed by zero or more decimal digits. The string must contain at least one digit in either the integer or the fraction. The number formed by the sign, the integer and the fraction is referred to as the significand. The exponent consists of the character `e` (`U+0065`) or `E` (`U+0045`) followed by one or more decimal digits. Services **should** normalize decimal values before storing them by: - Removing an explicitly-provided `+` sign (`+2.5` -> `2.5`). - Replacing a zero-length integer value with `0` (`.5` -> `0.5`). - Coercing the exponent character to upper-case, with explicit sign (`2.5e8` -> `2.5E+8`). - Removing an explicitly-provided zero exponent (`2.5E0` -> `2.5`). Services **may** perform additional normalization based on its own needs and the internal decimal implementation selected, such as shifting the decimal point and exponent value together (example: `2.5E-1` <-> `0.25`). Additionally, services **may** preserve trailing zeroes in the fraction to indicate increased precision, but are not required to do so. Note that only the `.` character is supported to divide the integer and the fraction; `,` **should not** be supported regardless of locale. Additionally, thousand separators **should not** be supported. If a service does support them, values **must** be normalized. The ENBF grammar is: DecimalString = '' | [Sign] Significand [Exponent]; Sign = '+' | '-'; Significand = Digits '.' | [Digits] '.' Digits; Exponent = ('e' | 'E') [Sign] Digits; Digits = { '0' | '1' | '2' | '3' | '4' | '5' | '6' | '7' | '8' | '9' }; Services **should** clearly document the range of supported values, the maximum supported precision (total number of digits), and, if applicable, the scale (number of digits after the decimal point), as well as how it behaves when receiving out-of-bounds values. Services **may** choose to accept values passed as input even when the value has a higher precision or scale than the service supports, and **should** round the value to fit the supported scale. Alternatively, the service **may** error with `400 Bad Request` (`INVALID_ARGUMENT` in gRPC) if precision would be lost. Services **should** error with `400 Bad Request` (`INVALID_ARGUMENT` in gRPC) if the service receives a value outside of the supported range.
},
"decimalValueConfidenceInterval": { # Represents the confidence interval of a metric. # Confidence interval of a value that is of type `type.Decimal`.
"lowerBound": { # A representation of a decimal value, such as 2.5. Clients may convert values into language-native decimal formats, such as Java's [BigDecimal](https://docs.oracle.com/en/java/javase/11/docs/api/java.base/java/math/BigDecimal.html) or Python's [decimal.Decimal](https://docs.python.org/3/library/decimal.html). # The confidence interval's lower bound.
"value": "A String", # The decimal value, as a string. The string representation consists of an optional sign, `+` (`U+002B`) or `-` (`U+002D`), followed by a sequence of zero or more decimal digits ("the integer"), optionally followed by a fraction, optionally followed by an exponent. An empty string **should** be interpreted as `0`. The fraction consists of a decimal point followed by zero or more decimal digits. The string must contain at least one digit in either the integer or the fraction. The number formed by the sign, the integer and the fraction is referred to as the significand. The exponent consists of the character `e` (`U+0065`) or `E` (`U+0045`) followed by one or more decimal digits. Services **should** normalize decimal values before storing them by: - Removing an explicitly-provided `+` sign (`+2.5` -> `2.5`). - Replacing a zero-length integer value with `0` (`.5` -> `0.5`). - Coercing the exponent character to upper-case, with explicit sign (`2.5e8` -> `2.5E+8`). - Removing an explicitly-provided zero exponent (`2.5E0` -> `2.5`). Services **may** perform additional normalization based on its own needs and the internal decimal implementation selected, such as shifting the decimal point and exponent value together (example: `2.5E-1` <-> `0.25`). Additionally, services **may** preserve trailing zeroes in the fraction to indicate increased precision, but are not required to do so. Note that only the `.` character is supported to divide the integer and the fraction; `,` **should not** be supported regardless of locale. Additionally, thousand separators **should not** be supported. If a service does support them, values **must** be normalized. The ENBF grammar is: DecimalString = '' | [Sign] Significand [Exponent]; Sign = '+' | '-'; Significand = Digits '.' | [Digits] '.' Digits; Exponent = ('e' | 'E') [Sign] Digits; Digits = { '0' | '1' | '2' | '3' | '4' | '5' | '6' | '7' | '8' | '9' }; Services **should** clearly document the range of supported values, the maximum supported precision (total number of digits), and, if applicable, the scale (number of digits after the decimal point), as well as how it behaves when receiving out-of-bounds values. Services **may** choose to accept values passed as input even when the value has a higher precision or scale than the service supports, and **should** round the value to fit the supported scale. Alternatively, the service **may** error with `400 Bad Request` (`INVALID_ARGUMENT` in gRPC) if precision would be lost. Services **should** error with `400 Bad Request` (`INVALID_ARGUMENT` in gRPC) if the service receives a value outside of the supported range.
},
"upperBound": { # A representation of a decimal value, such as 2.5. Clients may convert values into language-native decimal formats, such as Java's [BigDecimal](https://docs.oracle.com/en/java/javase/11/docs/api/java.base/java/math/BigDecimal.html) or Python's [decimal.Decimal](https://docs.python.org/3/library/decimal.html). # The confidence interval's upper bound.
"value": "A String", # The decimal value, as a string. The string representation consists of an optional sign, `+` (`U+002B`) or `-` (`U+002D`), followed by a sequence of zero or more decimal digits ("the integer"), optionally followed by a fraction, optionally followed by an exponent. An empty string **should** be interpreted as `0`. The fraction consists of a decimal point followed by zero or more decimal digits. The string must contain at least one digit in either the integer or the fraction. The number formed by the sign, the integer and the fraction is referred to as the significand. The exponent consists of the character `e` (`U+0065`) or `E` (`U+0045`) followed by one or more decimal digits. Services **should** normalize decimal values before storing them by: - Removing an explicitly-provided `+` sign (`+2.5` -> `2.5`). - Replacing a zero-length integer value with `0` (`.5` -> `0.5`). - Coercing the exponent character to upper-case, with explicit sign (`2.5e8` -> `2.5E+8`). - Removing an explicitly-provided zero exponent (`2.5E0` -> `2.5`). Services **may** perform additional normalization based on its own needs and the internal decimal implementation selected, such as shifting the decimal point and exponent value together (example: `2.5E-1` <-> `0.25`). Additionally, services **may** preserve trailing zeroes in the fraction to indicate increased precision, but are not required to do so. Note that only the `.` character is supported to divide the integer and the fraction; `,` **should not** be supported regardless of locale. Additionally, thousand separators **should not** be supported. If a service does support them, values **must** be normalized. The ENBF grammar is: DecimalString = '' | [Sign] Significand [Exponent]; Sign = '+' | '-'; Significand = Digits '.' | [Digits] '.' Digits; Exponent = ('e' | 'E') [Sign] Digits; Digits = { '0' | '1' | '2' | '3' | '4' | '5' | '6' | '7' | '8' | '9' }; Services **should** clearly document the range of supported values, the maximum supported precision (total number of digits), and, if applicable, the scale (number of digits after the decimal point), as well as how it behaves when receiving out-of-bounds values. Services **may** choose to accept values passed as input even when the value has a higher precision or scale than the service supports, and **should** round the value to fit the supported scale. Alternatively, the service **may** error with `400 Bad Request` (`INVALID_ARGUMENT` in gRPC) if precision would be lost. Services **should** error with `400 Bad Request` (`INVALID_ARGUMENT` in gRPC) if the service receives a value outside of the supported range.
},
},
"metric": "A String", # Name of the metric.
},
"metricSet": "A String", # Metric set resource where the anomaly was detected.
"name": "A String", # Identifier. Name of the anomaly. Format: apps/{app}/anomalies/{anomaly}
"timelineSpec": { # Specification of the time-related aggregation parameters of a timeline. Timelines have an aggregation period (`DAILY`, `HOURLY`, etc) which defines how events are aggregated in metrics. The points in a timeline are defined by the starting DateTime of the aggregation period. The duration is implicit in the AggregationPeriod. Hourly aggregation periods, when supported by a metric set, are always specified in UTC to avoid ambiguities around daylight saving time transitions, where an hour is skipped when adopting DST, and repeated when abandoning DST. For example, the timestamp '2021-11-07 01:00:00 America/Los_Angeles' is ambiguous since it can correspond to '2021-11-07 08:00:00 UTC' or '2021-11-07 09:00:00 UTC'. Daily aggregation periods require specifying a timezone which will determine the precise instants of the start and the end of the day. Not all metric sets support all timezones, so make sure to check which timezones are supported by the metric set you want to query. # Timeline specification that covers the anomaly period.
"aggregationPeriod": "A String", # Type of the aggregation period of the datapoints in the timeline. Intervals are identified by the date and time at the start of the interval.
"endTime": { # Represents civil time (or occasionally physical time). This type can represent a civil time in one of a few possible ways: * When utc_offset is set and time_zone is unset: a civil time on a calendar day with a particular offset from UTC. * When time_zone is set and utc_offset is unset: a civil time on a calendar day in a particular time zone. * When neither time_zone nor utc_offset is set: a civil time on a calendar day in local time. The date is relative to the Proleptic Gregorian Calendar. If year, month, or day are 0, the DateTime is considered not to have a specific year, month, or day respectively. This type may also be used to represent a physical time if all the date and time fields are set and either case of the `time_offset` oneof is set. Consider using `Timestamp` message for physical time instead. If your use case also would like to store the user's timezone, that can be done in another field. This type is more flexible than some applications may want. Make sure to document and validate your application's limitations. # Ending datapoint of the timeline (exclusive). See start_time for restrictions. The timezone of the end point must match the timezone of the start point.
"day": 42, # Optional. Day of month. Must be from 1 to 31 and valid for the year and month, or 0 if specifying a datetime without a day.
"hours": 42, # Optional. Hours of day in 24 hour format. Should be from 0 to 23, defaults to 0 (midnight). An API may choose to allow the value "24:00:00" for scenarios like business closing time.
"minutes": 42, # Optional. Minutes of hour of day. Must be from 0 to 59, defaults to 0.
"month": 42, # Optional. Month of year. Must be from 1 to 12, or 0 if specifying a datetime without a month.
"nanos": 42, # Optional. Fractions of seconds in nanoseconds. Must be from 0 to 999,999,999, defaults to 0.
"seconds": 42, # Optional. Seconds of minutes of the time. Must normally be from 0 to 59, defaults to 0. An API may allow the value 60 if it allows leap-seconds.
"timeZone": { # Represents a time zone from the [IANA Time Zone Database](https://www.iana.org/time-zones). # Time zone.
"id": "A String", # IANA Time Zone Database time zone. For example "America/New_York".
"version": "A String", # Optional. IANA Time Zone Database version number. For example "2019a".
},
"utcOffset": "A String", # UTC offset. Must be whole seconds, between -18 hours and +18 hours. For example, a UTC offset of -4:00 would be represented as { seconds: -14400 }.
"year": 42, # Optional. Year of date. Must be from 1 to 9999, or 0 if specifying a datetime without a year.
},
"startTime": { # Represents civil time (or occasionally physical time). This type can represent a civil time in one of a few possible ways: * When utc_offset is set and time_zone is unset: a civil time on a calendar day with a particular offset from UTC. * When time_zone is set and utc_offset is unset: a civil time on a calendar day in a particular time zone. * When neither time_zone nor utc_offset is set: a civil time on a calendar day in local time. The date is relative to the Proleptic Gregorian Calendar. If year, month, or day are 0, the DateTime is considered not to have a specific year, month, or day respectively. This type may also be used to represent a physical time if all the date and time fields are set and either case of the `time_offset` oneof is set. Consider using `Timestamp` message for physical time instead. If your use case also would like to store the user's timezone, that can be done in another field. This type is more flexible than some applications may want. Make sure to document and validate your application's limitations. # Starting datapoint of the timeline (inclusive). Must be aligned to the aggregation period as follows: * HOURLY: the 'minutes', 'seconds' and 'nanos' fields must be unset. The time_zone can be left unset (defaults to UTC) or set explicitly to "UTC". Setting any other utc_offset or timezone id will result in a validation error. * DAILY: the 'hours', 'minutes', 'seconds' and 'nanos' fields must be unset. Different metric sets support different timezones. It can be left unset to use the default timezone specified by the metric set. The timezone of the end point must match the timezone of the start point.
"day": 42, # Optional. Day of month. Must be from 1 to 31 and valid for the year and month, or 0 if specifying a datetime without a day.
"hours": 42, # Optional. Hours of day in 24 hour format. Should be from 0 to 23, defaults to 0 (midnight). An API may choose to allow the value "24:00:00" for scenarios like business closing time.
"minutes": 42, # Optional. Minutes of hour of day. Must be from 0 to 59, defaults to 0.
"month": 42, # Optional. Month of year. Must be from 1 to 12, or 0 if specifying a datetime without a month.
"nanos": 42, # Optional. Fractions of seconds in nanoseconds. Must be from 0 to 999,999,999, defaults to 0.
"seconds": 42, # Optional. Seconds of minutes of the time. Must normally be from 0 to 59, defaults to 0. An API may allow the value 60 if it allows leap-seconds.
"timeZone": { # Represents a time zone from the [IANA Time Zone Database](https://www.iana.org/time-zones). # Time zone.
"id": "A String", # IANA Time Zone Database time zone. For example "America/New_York".
"version": "A String", # Optional. IANA Time Zone Database version number. For example "2019a".
},
"utcOffset": "A String", # UTC offset. Must be whole seconds, between -18 hours and +18 hours. For example, a UTC offset of -4:00 would be represented as { seconds: -14400 }.
"year": 42, # Optional. Year of date. Must be from 1 to 9999, or 0 if specifying a datetime without a year.
},
},
},
],
"nextPageToken": "A String", # Continuation token to fetch the next page of data.
}
list_next()
Retrieves the next page of results.
Args:
previous_request: The request for the previous page. (required)
previous_response: The response from the request for the previous page. (required)
Returns:
A request object that you can call 'execute()' on to request the next
page. Returns None if there are no more items in the collection.